Complexation of microcystins and nodularin by cyclodextrins in aqueous solution, a potential removal strategy

Amination of cotton fiber using polyethyleneimine and its application as an adsorbent to directly remove a harmful cyanobacterial species, Microcystis aeruginosa, from an aqueous medium

In the present study, we applied an adsorption-based strategy for the removal of a harmful cyanobacterial species, Microcystis aeruginosa, using cotton fiber. Considering the negatively charged surface properties of M. aeruginosa cells in aqueous phases, aminated cotton fibers were prepared through polyethyleneimine (PEI) modification on the pristine cotton fibers. The aminated surface properties of PEI-modified cotton fiber (PEI-cotton) were confirmed by Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and potentiometric titration analyses. The pristine cotton fiber could not remove the M. aeruginosa cells, but the PEI-cotton could efficiently remove 98.7% of M. aeruginosa cells from the aqueous medium. In addition, removed cells could be observed on the sorbent surface by field emission scanning electron microscopy (FE-SEM) analysis. PEI-cotton fabricated in 3% PEI solution could remove M. aeruginosa cells (97.9%) more efficiently compared to that fabricated in 1% (82.1%) and 2% (86.2%) of PEI solutions. From the toxicity assessment of the PEI-cotton using Daphnia magna, negligible toxicity of PEI-cotton was confirmed. Our results indicate that the application of PEI-cotton fibers for the removal of M. aeruginosa cells could be suggested as a feasible, effective, and eco-friendly method of harmful algal bloom (HAB) control in water resources.

Cyclodextrin-enhanced 1,4-dioxane treatment kinetics with TCE and 1,1,1-TCA using aqueous ozone

Enhanced reactivity of aqueous ozone (O₃) with hydroxypropyl-β-cyclodextrin (HPβCD) and its impact on relative reactivity of O₃ with contaminants were evaluated herein. Oxidation kinetics of 1,4-dioxane, trichloroethylene (TCE), and 1,1,1-trichloroethane (TCA) using O₃ in single and multiple contaminant systems, with and without HPβCD, were quantified. 1,4-Dioxane decay rate constants for O₃ in the presence of HPβCD increased compared to those without HPβCD. Density functional theory molecular modeling confirmed that formation of ternary complexes with HPβCD, O₃, and contaminant increased reactivity by increasing reactant proximity and through additional reactivity within the HPβCD cavity. In the presence of chlorinated co-contaminants, the oxidation rate constant of 1,4-dioxane was enhanced. Use of HPβCD enabled O₃ reactivity within the HPβCD cavity and enhanced 1,4-dioxane treatment rates without inhibition in the presence of TCE, TCA, and radical scavengers including NaCl and bicarbonate. Micro-environmental chemistry within HPβCD inclusion cavities mediated contaminant oxidation reactions with increased reaction specificity.

Transcriptomic Analysis Reveals the Pathways Associated with Resisting and Degrading Microcystin in Ochromonas

Toxic Microcystis bloom is a tough environment problem worldwide. Microcystin is highly toxic and is an easily accumulated secondary metabolite of toxic Microcystis that threatens water safety. Biodegradation of microcystin by protozoan grazing is a promising and efficient biological method, but the mechanism in this process is still unclear. The present study aimed to identify potential pathways involved in resisting and degrading microcystin in flagellates through transcriptomic analyses. A total of 999 unigenes were significantly differentially expressed between treatments with flagellates Ochromonas fed on microcystin-producing Microcystis and microcystin-free Microcystis. These dysregulated genes were strongly associated with translation, carbohydrate metabolism, phagosome, and energy metabolism. Upregulated genes encoding peroxiredoxin, serine/threonine-protein phosphatase, glutathione S-transferase (GST), HSP70, and O-GlcNAc transferase were involved in resisting microcystin. In addition, genes encoding cathepsin and GST and genes related to inducing reactive oxygen species (ROS) were all upregulated, which highly probably linked with degrading microcystin in flagellates. The results of this study provided a better understanding of transcriptomic responses of flagellates to toxic Microcystis as well as highlighted a potential mechanism of biodegrading microcystin by flagellate Ochromonas, which served as a strong theoretical support for control of toxic microalgae by protozoans.

Benchmarking Micropollutant Removal by Activated Carbon and Porous β-Cyclodextrin Polymers under Environmentally Relevant Scenarios

The cost-effective and energy-efficient removal of organic micropollutants (MPs) from water and wastewater is challenging. The objective of this research was to evaluate the performance of porous β-cyclodextrin polymers (P-CDP) as adsorbents of MPs in aquatic matrixes. Adsorption kinetics and MP removal were measured in batch and flow-through experiments for a mixture of 83 MPs at environmentally relevant concentrations (1 μg L^-1) and across gradients of pH, ionic strength, and natural organic matter (NOM) concentrations. Performance was benchmarked against a coconut-shell activated carbon (CCAC). Data reveal pseudo-second-order rate constants for most MPs ranging between 1.5 and 40 g mg^-1 min^-1 for CCAC and 30 and 40000 g mg^-1 min^-1 for P-CDP. The extent of MP removal demonstrates slower but more uniform uptake on CCAC and faster but more selective uptake on P-CDP. Increasing ionic strength and the presence of NOM had a negative effect on the adsorption of MPs to CCAC but had almost no effect on adsorption of MPs to P-CDP. P-CDP performed particularly well for positively charged MPs and neutral or negatively charged MPs with McGowan volumes greater than 1.7 (cm³ mol^-1)/100. These data highlight advantages of P-CDP adsorbents relevant to MP removal during water and wastewater treatment.

A promising application of chitosan quaternary ammonium salt to removal of Microcystis aeruginosa cells from drinking water

This work was aimed toward studying the new application of chitosan quaternary ammonium salt (HTCC), a water-soluble chitosan derivative, on removal of Microcystis aeruginosa (M. aeruginosa) cells during HTCC coagulation and floc storage. Results showed that all cells were removed without damage under optimum coagulation conditions: HTCC dosage 1.5mg/L, rapid mixing for 0.5min at 5.04g and slow mixing for 30min at 0.20g. The high removal efficiency was due to the large size and compact structure of flocs formed by HTCC, which readily settled. During floc storage, HTCC could induce production of reactive oxygen species (ROS), which would accelerate M. aeruginosa cell lysis. But the flocs, into which the cells aggregated, could protect cells from cellular oxidative damage caused by ROS, thus keeping the cells intact for a longer time.

Recyclable Capture and Destruction of Aqueous Micropollutants Using the Molecule-Specific Cavity of Cyclodextrin Polymer Coupled with KMnO4 Oxidation

The removal of aqueous micropollutants remains challenging because of the interference of natural water constituents that are typically 3-9 orders of magnitude more concentrated. Cyclodextrins, which feature molecular recognition and are widely applied in separation and catalysis, are promising materials in the development of pollutant treatment technologies. Here, we described the facile integration of cyclodextrin polymer (CDP) adsorption and KMnO4 oxidation for recyclable capture and destruction of aqueous micropollutants (i.e., antibiotics and TBBPA). CDP exhibited adsorption efficiencies of 0.81-88% and 0.81-94% toward 14 pollutants at 50.0 ng/L and 50.0 μg/L, respectively, at a solid-to-liquid ratio of 1:1250. The presence of simulated or natural water constituents (e.g., Mg(2+), Ca(2+), DOC, and a combination thereof) did not decrease the adsorption potential of CDP toward these pollutants because the pollutants, based on molecular specificity, were entrapped in the CD cavity. Subsequent KMnO4 oxidation completely degraded the retained pollutants, demonstrating that the pollutants could be broken down in the cavity. Pristine CDP was rearranged into the structurally loose composites that featured a porous CDP architecture with uniform embedment of δ-MnO2 nanoparticles and different adsorption efficiencies. δ-MnO2 loading was a linear function of the number of times the integrated procedure was repeated, underlying the accurate control of CDP recycling. Thus, this approach may represent a new method for the removal of aqueous micropollutants.

Separation of Microcystin-LR by Cyclodextrin-Functionalized Magnetic Composite of Colloidal Graphene and Porous Silica

Microcystin-LR belongs to the family of microcystins produced by cyanobacteria and known to be the most toxic of this family. Existence of cyanobacteria in water bodies leads to the contamination of drinking water with microcystin-LR and thus their separation is essential for an advanced water purification system. Here we report functional nanocomposite-based selective separation of microcystin-LR from contaminated water. We have synthesized cyclodextrin-functionalized magnetic composite of colloidal graphene and porous silica where the cyclodextrin component offers host-guest interaction with microcystin-LR and the magnetic component offers easier separation of microcystin-LR from water. High surface area and large extent of chemical functional groups offer high loading (up to 18 wt %) of cyclodextrin with these nanocomposites, and the dispersible form of the nanocomposite offers easier accessibility of cyclodextrin to microcystin-LR. We have shown that microcystin-LR separation efficiency is significantly enhanced after functionalization with cyclodextrin, and among all the tested cyclodextrins, γ-cyclodextrin offers the best performance. We have also found that graphene-based nanocomposite offers better performance over porous silica-based nanocomposite due to better accessibility of cyclodextrins for interaction with microcystin-LR. The proposed graphene-based functional nanocomposite is environment friendly, reusable, and applicable for advanced water purification.

Monitoring and removal of cyanobacterial toxins from drinking water by algal-activated carbon

Microcystins (MCs) are the most potent toxins that can be produced by cyanobacteria in drinking water supplies. This study investigated the abundance of toxin-producing algae in 11 drinking water treatment plants (DWTPs). A total of 26 different algal taxa were identified in treated water, from which 12% were blue green, 29% were green, and 59% were diatoms. MC levels maintained strong positive correlations with number of cyanophycean cells in raw and treated water of different DWTPs. Furthermore, the efficiency of various algal-based adsorbent columns used for the removal of these toxins was evaluated. The MCs was adsorbed in the following order: mixed algal-activated carbon (AAC) ≥ individual AAC > mixed algal powder > individual algal powder. The results showed that the AAC had the highest efficient columns capable of removing 100% dissolved MCs from drinking water samples, thereby offering an economically feasible technology for efficient removal and recovery of MCs in DWTPs.

Supramolecular complexations of natural products

Complexations of natural products with synthetic receptors as well as the use of natural products as host compounds are reviewed, with an emphasis on possible practical uses or on biomedical significance. Applications such as separation, sensing, enzyme monitoring, and protection of natural drugs are first outlined. We then discuss examples of complexes with all important classes of natural compounds, such as amino acids, peptides, nucleosides/nucleotides, carbohydrates, catecholamines, flavonoids, terpenoids/steroids, alkaloids, antibiotics and toxins.

Microwave-induced low temperature pyrolysis of macroalgae for unprecedented hydrogen-enriched syngas production

An efficient methodology based on low temperature microwave-induced pyrolysis has been developed for syngas production from macroalgae.

Chitosan-cellulose composite materials: preparation, characterization and application for removal of microcystin

We developed a simple and one-step method to prepare biocompatible composites from cellulose (CEL) and chitosan (CS). [BMIm(+)Cl(-)], an ionic liquid (IL), was used as a green solvent to dissolve and prepare the [CEL+CS] composites. Since majority (>88%) of IL used was recovered for reuse by distilling the aqueous washings of [CEL+CS], the method is recyclable. XRD, FTIR, NIR, (13)C CP-MAS-NMR and SEM were used to monitor the dissolution and to characterize the composites. The composite was found to have combined advantages of their components: superior mechanical strength (from CEL) and excellent adsorption capability for microcystin-LR, a deadly toxin produced by cyanobacteria (from CS). Specifically, the mechanical strength of the composites increased with CEL loading; e.g., up to 5× increase in tensile strength was achieved by adding 80% of CEL into CS. Kinetic results of adsorption confirm that unique properties of CS remain intact in the composite, i.e., it is not only a very good adsorbent for microcystin but also is better than all other available adsorbents. For example, it can adsorb 4× times more microcystin than the best reported adsorbent. Importantly, the microcystin adsorbed can be quantitatively desorbed to enable the composite to be reused with similar adsorption efficiency.

Degradation of microcystin-LR in water by glow discharge plasma oxidation at the gas-solution interface and its safety evaluation

Microcystin-LR (MC-LR) is one of the most commonly found microcystins (MCs) in fresh water and it poses danger to human health due to its potential hepatotoxicity. In the present study, we employed a novel method by using discharge plasma taking place at the gas-solution interface in gas atmosphere to degrade MC-LR in aqueous solution. The initial degradation rate of MC-LR was fastest under acidic conditions (5.41 ± 0.17 × 10(-3) mM min(-1) at pH 3.04) and decreased to 2.22 ± 0.11 × 10(-3) mM min(-1) and 0.912 ± 0.02 × 10(-3) mM min(-1) at pH 4.99 and 7.02, respectively. The effects of total soluble nitrogen (TN), total soluble phosphorus (TP) and natural organic matter (NOM) on the degradation efficiency were studied. The degradation rate was remarkably affected by TP and TN. Mass spectrometry was applied to identify the products of the reactions. Major degradation pathways are proposed according to the results of liquid chromatography/mass spectrometry (LC/MS) results. It suggests that the degradation of MC-LR is initiated via the attack of hydroxyl radicals on the conjugated carbon double bonds of Adda and on the benzene ring of Adda. Finally, the toxicity of intermediates or end-products from MC-LR degraded by this method was assessed using Caenorhabditis elegans. Our findings demonstrates that discharge plasma oxidation is a promising technology for degradation and removal of MC-LR and it may lead us to a new route to efficient treatment of other cyanotoxins from aqueous solutions.