Roles of Li+ and Zr4+ cations in the catalytic performances of Co(1-x)M(x)Cr(2)O(4) (M = Li, Zr; x = 0-0.2) for methane combustion

Creating Atomically Iridium-Doped PdOx Nanoparticles for Efficient and Durable Methane Abatement

The urgent environmental concern of methane abatement, attributed to its high global warming potential, necessitates the development of methane oxidation catalysts (MOC) with enhanced low-temperature activity and durability. Herein, an iridium-doped PdOx nanoparticle supported on silicalite-1 zeolite (PdIr/S-1) catalyst was synthesized and applied for methane catalytic combustion. Comprehensive characterizations confirmed the atomically dispersed nature of iridium on the surface of PdOx nanoparticles, creating an Ir4f-O-Pdcus microstructure. The atomically doped Ir transferred more electrons to adjacent oxygen atoms, modifying the electronic structure of PdOx and thus enhancing the redox ability of the PdIr/S-1 catalysts. This electronic modulation facilitated methane adsorption on the Pd site of Ir4f-O-Pdcus, reducing the energy barrier for C-H bond cleavage and thereby increasing the reaction rate for methane oxidation. Consequently, the optimized PdIr0.1/S-1 showed outstanding low-temperature activity for methane combustion (T50 = 276 °C) after aging and maintained long-term stability over 100 h under simulated exhaust conditions. Remarkably, the novel PdIr0.1/S-1 catalyst demonstrated significantly enhanced activity even after undergoing harsh hydrothermal aging at 750 °C for 16 h, significantly outperforming the conventional Pd/Al2O3 catalyst. This work provides valuable insights for designing efficient and durable MOC catalysts, addressing the critical issue of methane abatement.

Unlocking High-Efficiency Methane Oxidation with Bimetallic Pd-Ce Catalysts under Zeolite Confinement

Catalytic complete oxidation is an efficient approach to reducing methane emissions, a significant contributor to global warming. This approach requires active catalysts that are highly resistant to sintering and water vapor. In this work, we demonstrate that Pd nanoparticles confined within silicalite-1 zeolites (Pd@S-1), fabricated using a facile in situ encapsulation strategy, are highly active and stable in catalyzing methane oxidation and are superior to those supported on the S-1 surface due to a confinement effect. The activity of the confined Pd catalysts was further improved by co-confining a suitable amount of Ce within the S-1 zeolite (PdCe_0.4@S-1), which is attributed to confinement-reinforced Pd-Ce interactions that promote the formation of oxygen vacancies and highly reactive oxygen species. Furthermore, the introduction of Ce improves the hydrophobicity of the S-1 zeolite and, by forming Pd-Ce mixed oxides, inhibits the transformation of the active PdO phase to inactive Pd(OH)₂ species. Overall, the bimetallic PdCe_0.4@S-1 catalyst delivers exceptional outstanding activity and durability in complete methane oxidation, even in the presence of water vapor. This study may provide new prospects for the rational design of high-performance and durable Pd catalysts for complete methane oxidation.

Boosting Toluene Combustion by Engineering Co-O Strength in Cobalt Oxide Catalysts

Exploring active and low-cost transition metal oxides (TMOs) based catalysts for volatile organic compounds (VOCs) abatement is vital for air pollution control technologies. Since 18 oxygen atoms are required for the complete mineralization of a toluene molecule, the participation of a large amount of active oxygen is a key requirement for the catalytic oxidation of toluene. Here, toluene degradation was improved by weakening the Co-O bond strength on the surface of cobalt oxide, so as to increase the amount of active oxygen species, while maintaining the high stability of the catalyst for toluene combustion. The bond strength of Co-O and the amount of surface active O₂ was regulated by tuning the pyrolysis temperature. The catalyst's redox ability and surface oxygen species activity are improved due to the weakening of the Co-O bond strength. It has been demonstrated that active oxygen plays a crucial role in boosting toluene combustion by engineering Co-O strength in cobalt oxide catalysts. This work provides a new understanding of the exploration and development of high-performance TMO catalysts for VOCs abatement.

Understanding the co-effects of manganese and cobalt on the enhanced SCR performance for MnxCo1−xCr2O4 spinel-type catalysts

A novel ternary Mn_0.1Co_0.9Cr₂O₄ catalyst was identified from a range of chromium-based spinel-type oxides for the SCR of NOx in coking flue gas. The SCR reaction mainly occurs between the adsorbed NH₃ and the adsorbed nitrates, following the Langmuir–Hinshelwood mechanism.

Rod-Like Nanoporous CeO2 Modified by PdO Nanoparticles for CO Oxidation and Methane Combustion with High Catalytic Activity and Water Resistance

A PdO/CeO2 composite with a rod-like nanoporous skeletal structure was prepared by combining the dealloying of Al-Ce-Pd alloy ribbons with calcination. For CO oxidation and CH4 combustion, the nanoporous PdO/CeO2 composite exhibits excellent catalytic activity, and the complete reaction temperatures of CO and CH4 are 80 °C and 380 °C, respectively. In addition, the composite possesses excellent cycle stability, CO2 toxicity, and water resistance, and the catalytic activity hardly decreases after 100 h of long-term stability testing in the presence of water vapour (2 × 105 ppm). The results of a series of characterizations indicate that the enhanced catalytic activity can be attributed to the good dispersion of the PdO nanoparticles, large specific surface area, strong redox capacity, interaction between PdO and CeO2, and more surface active oxygen on PdO. The results of the characterization and experiments also indicate that the PdO nanoparticles, prepared by combining dealloying and calcination, have a stronger catalytic activity than do Pd nanoparticles. Finally, a simple model is used to summarize the catalytic mechanism of the PdO/CeO2 composite. It is hoped that this work will provide insights into the development of high-activity catalysts.

Annealing Strategies for the Improvement of Low-Temperature NH3-Selective Catalytic Reduction Activity of CrMnO x Catalysts

Annealing strategies for the citrate complexation-combustion method have been explored as a simple approach for improving the catalytic activity of mixed Cr-Mn oxides for the NH3-selective catalytic reduction of NO x . Materials prepared at 300 and 400 °C possess largely amorphous structures, consistent with highly dispersed Cr/Mn components. Annealing at 300 °C for 10 h facilitates the formation of catalysts possessing the largest surface area, reducibility, acidity, and activity window (92-239 °C), while areal activity is measured at 3.8 nmol s-1 m-2 and is comparable to values obtained for materials prepared at 400 °C. Conversely, shorter annealing times of 1 and 5 h at 300 °C produce materials that transform NO x about 2-3 times faster at equivalent surface area. Characterization demonstrates that simple annealing strategies have significant impact on the physiochemical and textural properties of these materials. Moreover, reducibility, Oα species, and acidity were correlated against areal activity, but only the latter exhibited a near-linear correlation, indicating its dominance in controlling surface reaction rates.

Effect of Small Molecular Organic Acids on the Structure and Catalytic Performance of Sol–Gel Prepared Cobalt Cerium Oxides towards Toluene Combustion

Cobalt cerium oxide catalysts with small molecular organic acids (SOAs) as chelating agents were prepared via the sol–gel method and investigated for the complete oxidation of toluene. Four kinds of natural SOAs, i.e. malic acid (MA), citric acid (CA), glycolic acid (GA), and tartaric acid (TA), were selected. The effect of organic acids on the composition, structure, morphology and catalytic performance of metal oxides is discussed in details. The cobalt cerium oxides catalysts were characterized by various techniques, including TG–DSC, XRD, SEM–EDS, N2–adsorption and desorption, XPS, and H2–TPR analyses. The results show that the nature of organic acids influenced the hydrolysis, condensation and calcination processes, as well as strongly affected the textural and physicochemical properties of the metal oxides synthesized. The best catalytic activity was obtained with the CoCe–MA catalyst, and the toluene conversion reached 90% at 242 °C. This outstanding catalytic activity could be related to its textural, redox properties and unique surface compositions and oxidation states. In addition, the CoCe–MA catalyst also showed excellent stability in long–time activity test.

Investigation of synergistic effects and high performance of La-Co composite oxides for toluene catalytic oxidation at low temperature

Cobalt oxides have been considered as a kind of highly efficient catalyst for the oxidation of volatile organic compounds (VOCs). In this work, lanthanum-cobalt composite oxides were prepared by using the co-precipitation method, and toluene was used as the model compound. Diversified techniques including XRD, SEM, Raman spectra, XPS, H₂-TPR, and N₂ adsorption-desorption were applied to investigate the physicochemical properties of as-prepared materials. The composite catalysts showed different morphology including larger specific surface area and higher pore volume which would accelerate the adsorption of toluene and improve the amount of active sites on surface. Moreover, the addition of lanthanum could enhance the low-temperature reducibility, and it could be also beneficial to expose more Co³⁺ and adsorbed oxygen species on the surface of catalysts which could accelerate the oxidation of toluene and lower onset oxidation temperature. 0.05La-Co (with a molar ratio of lanthanum against cobalt is 0.05) showed the best catalytic performance. The complete conversion of toluene was achieved at 225 °C under the condition of toluene concentration = 1000 ppm and SV = 20,000 ml·g^-1·h^-1. Stability test over 0.05La-Co was conducted at 225 °C and it could maintain the 100% conversion of toluene for 720 min, indicating the excellent stability of as-prepared catalysts. Undoubtedly, lanthanum-cobalt composite oxide is a kind of promising material for the catalytic oxidation of VOCs.

Enhanced Visible-Light-Driven Photocatalytic Bacterial Inactivation by Ultrathin Carbon-Coated Magnetic Cobalt Ferrite Nanoparticles

Ultrathin hydrothermal carbonation carbon (HTCC)-coated cobalt ferrite (CoFe₂O₄) composites with HTCC coating thicknesses between 0.62 and 4.38 nm were fabricated as novel, efficient, and magnetically recyclable photocatalysts via a facile, green approach. The CoFe₂O₄/HTCC composites showed high magnetization and low coercivity, which favored magnetic separation for reuse. The results show that the close coating of HTCC on CoFe₂O₄ nanoparticles enhanced electron transfer and charge separation, leading to a significant improvement in photocatalytic efficiency. The composites exhibited superior photocatalytic inactivation toward Escherichia coli K-12 under visible-light irradiation, with the complete inactivation of 7 log₁₀ cfu·mL^-1 of bacterial cells within 60 min. The destruction of bacterial cell membranes was monitored by field-effect scanning electron microscopy analysis and fluorescence microscopic images. The bacterial inactivation mechanism was investigated in a scavenger study, and ^•O₂, H₂O₂, and h⁺ were identified as the major reactive species for bacterial inactivation. Multiple cycle runs revealed that these composites had excellent stability and reusability. In addition, the composites showed good photocatalytic bacterial inactivation performance in authentic water matrices such as surface water samples and secondarily treated sewage effluents. The results of this work indicate that CoFe₂O₄/HTCC composites have great potential in large-scale photocatalytic disinfection operations.

Efficient Removal of Methane over Cobalt-Monoxide-Doped AuPd Nanocatalysts

To overcome deactivation of Pd-based catalysts at high temperatures, we herein design a novel pathway by introducing a certain amount of CoO to the supported Au-Pd alloy nanoparticles (NPs) to generate high-performance Au-Pd-xCoO/three-dimensionally ordered macroporous (3DOM) Co₃O₄ (x is the Co/Pd molar ratio) catalysts. The doping of CoO induced the formation of PdO-CoO active sites, which was beneficial for the improvement in adsorption and activation of CH₄ and catalytic performance. The Au-Pd-0.40CoO/3DOM Co₃O₄ sample performed the best (T_90% = 341 °C at a space velocity of 20 000 mL g^-1 h^-1). Deactivation of the 3DOM Co₃O₄-supported Au-Pd, Pd-CoO, and Au-Pd-xCoO nanocatalysts resulting from water vapor addition was due to the formation and accumulation of hydroxyl on the catalyst surface, whereas deactivation of the Pd-CoO/3DOM Co₃O₄ catalyst at high temperatures (680-800 °C) might be due to decomposition of the PdO_y active phase into aggregated Pd⁰ NPs. The Au-Pd-xCoO/3DOM Co₃O₄ nanocatalysts exhibited better thermal stability and water tolerance ability compared to the 3DOM Co₃O₄-supported Au-Pd and Pd-CoO nanocatalysts. We believe that the supported Au-Pd-xCoO nanomaterials are promising catalysts in practical applications for organic combustion.

Porous Zr(x)Si(1-x)O₂ shell/void/TiO₂ core particles with enhancing transfer for cleaning water

In order to immobilize TiO2 and prevent TiO2 nanoparticles from damaging polymeric supporters, the porous Zr(x)Si(1-x)O2 shell/void/TiO2 core particles (Zr-SVTs) were fabricated by the synergistic effect between nonionic surfactant P123 ((EO)20(PO)70(EO)20) and oleic acid (CH3(CH2)7CH=CH(CH2)7COOH) and cohydrolysis between TEOS and ZrOCl2·8H2O. Zr-SVTs were characterized by FT-IR, SEM, TEM, EDX and BET. The results show Zr-SVTs exhibit well-developed spherical shape with channels (approximately 5.5 nm in diameter) in porous Zr(x)Si(1-x)O2 shells. Moreover, the preparation conditions of Zr-SVTs were studied and confirmed, and the photocatalytic activity of Zr-SVTs was studied by photodegrading methyl orange in aqueous solution and oil in sewage containing oil. Alternatively, the photocatalytic activity of Zr-SVTs presents better result compared with SiO2 shell/void/TiO2 core (SVT) without doping Zr into the SiO2 shell, which further demonstrates that the Zr(x)Si(1-x)O2 shell could promote the mass transfer inside channels of Zr-SVTs. It suggests that Zr-SVTs with higher photocatalytic activity are desirable for application in water cleaning.

Three dimensionally ordered macroporous Pd-LaMnO3 self-regeneration catalysts for methane combustion

Three-dimensionally ordered macroporous (3DOM) Pd-LaMnO3 self-regeneration catalysts were successfully prepared. After reduction treatment at 500 °C, the catalyst exhibited the best catalytic activity for methane combustion. The excellent catalytic performance was attributed to the ordered porous structure, the large surface area, and the strong interaction between segregated Pd and the LaMnO3 substrate.

The abatement of major pollutants in air and water by environmental catalysis

This review reports the research progress in the abatement of major pollutants in air and water by environmental catalysis. For air pollution control, the selective catalytic reduction of NO x (SCR) by ammonia and hydrocarbons on metal oxide and zeolite catalysts are reviewed and discussed, as is the removal of Hg from flue gas by catalysis. The oxidation of Volatile organic compounds (VOCs) by photo- and thermal-catalysis for indoor air quality improvement is reviewed. For wastewater treatment, the catalytic elimination of inorganic and organic pollutants in wastewater is presented. In addition, the mechanism for the procedure of abatement of air and water pollutants by catalysis is discussed in this review. Finally, a research orientation on environment catalysis for the treatment of air pollutants and wastewater is proposed.