Highly selective and stable carbon dioxide uptake in polyindole-derived microporous carbon materials

Advances of carbon-based materials for activating peracetic acid in advanced oxidation processes: A review

In recent years, the peracetic acid (PAA)-based advanced oxidation process (AOPs) has garnered significant attention in the field of water treatment due to rapid response time and environmentally-friendliness. The activation of PAA systems by diverse carbon-based materials plays a crucial role in addressing emerging environmental contaminants, including various types, structures, and modified forms of carbon materials. However, the structural characteristics and structure-activity relationship of carbon-based materials in the activation of PAA are intricate, while the degradation pathways and dominant active species exhibit diversity. Therefore, it is imperative to elucidate the developmental process of the carbon-based materials/PAA system through resource integration and logical categorization, thereby indicating potential avenues for future research. The present paper comprehensively reviews the structural characteristics and action mechanism of carbon-based materials in PAA system, while also analyzing the development, properties, and activation mechanism of heteroatom-doped carbon-based materials in this system. In conclusion, this study has effectively organized the resources pertaining to prominent research direction of comprehensive remediation of environmental water pollution, thereby elucidating the underlying logic and thought process. Consequently, it establishes robust theoretical foundation for future investigations and applications involving carbon-based materials/PAA system.

Experimental and modelling studies of carbon dioxide capture onto pristine, nitrogen-doped, and activated ordered mesoporous carbons

The search for suitable materials for carbon dioxide capture and storage has attracted the attention of the scientific community in view of the increased global CO₂ levels and its after-effects. Among the different materials under research, porous carbons and their doped analogues are extensively debated for their ability to store carbon dioxide at high pressures. The present paper examined high-pressure carbon dioxide storage studies of 1-D hexagonal and 3-D cubic ordered mesoporous pristine and N-doped carbons prepared using the nano-casting method. Excess carbon dioxide sorption isotherms were obtained using the volumetric technique and were fitted using the Toth model. Various parameters that influence CO₂ storage on metal-free ordered mesoporous carbons, such as the effect of pore size, pore dimension, pyrolysis temperature, the impact of nitrogen substitution, and the effect of ammonia activation are discussed. It was observed that the carbon dioxide storage capacity has an inverse relation to the total nitrogen doped, the amount of pyridinic nitrogen functionality, and the pyrolysis temperature, whereas the pore size seems to have a linear relationship. On the other hand, the presence of oxygen has a positive effect on the sorption capacity. Among the prepared ordered mesoporous carbons, the ammonia-treated one has shown the highest adsorption capacity of 37.8 mmol g^-1 at 34 bar and 0 °C.

Molecular Sieving of Propylene from Propane in Metal-Organic Framework-Derived Ultramicroporous Carbon Adsorbents

The development of adsorption-based separation processes alternative to the energy-intensive cryogenic distillation for a mixture of propylene and propane remains essential but challenging in gas industries. Molecular sieving separation of C₃H₆/C₃H₈ on stable carbon adsorbents appeals to be promising, while it is quite challenging to realize due to the random distributions and arrangements of the internal pores in common carbons. Herein, a series of polysaccharide-based CD-MOF-derived ultramicroporous carbon adsorbents with their pore size tuned at a subangstrom level were prepared. Molecular sieving separation of C₃H₆/C₃H₈ was realized on the optimal C-CDMOF-2-700 owing to the delicate structure with an appropriate pore size (5.0 Å). Besides, C-CDMOF-2-700 exhibited a high C₃H₆ uptake of 1.97 mmol g^-1 under ambient conditions. An ultrahigh uptake ratio of C₃H₆/C₃H₈ at 1.0 kPa (403) was also achieved, outperforming all reported adsorbents. Kinetic adsorption tests and breakthrough experiments further demonstrate this well-designed carbon adsorbent to be promising in industrial C₃H₆/C₃H₈ separation.

Nitrogen-Doped Porous Carbon Materials Derived from Graphene Oxide/Melamine Resin Composites for CO2 Adsorption

CO₂ adsorption in porous carbon materials has attracted great interests for alleviating emission of post-combustion CO₂. In this work, a novel nitrogen-doped porous carbon material was fabricated by carbonizing the precursor of melamine-resorcinol-formaldehyde resin/graphene oxide (MR/GO) composites with KOH as the activation agent. Detailed characterization results revealed that the fabricated MR(0.25)/GO-500 porous carbon (0.25 represented the amount of GO added in wt.% and 500 denoted activation temperature in °C) had well-defined pore size distribution, high specific surface area (1264 m²·g⁻¹) and high nitrogen content (6.92 wt.%), which was mainly composed of the pyridinic-N and pyrrolic-N species. Batch adsorption experiments demonstrated that the fabricated MR(0.25)/GO-500 porous carbon delivered excellent CO₂ adsorption ability of 5.21 mmol·g⁻¹ at 298.15 K and 500 kPa, and such porous carbon also exhibited fast adsorption kinetics, high selectivity of CO₂/N₂ and good recyclability. With the inherent microstructure features of high surface area and abundant N adsorption sites species, the MR/GO-derived porous carbon materials offer a potentially promising adsorbent for practical CO₂ capture.

Porous, flexible, and core-shell structured carbon nanofibers hybridized by tin oxide nanoparticles for efficient carbon dioxide capture

HYPOTHESIS

Carbon based nanofibrous materials are considered to be promising sorbents for the CO₂ capture and storage. However, the precise control of porous structure with flexibility still remains a challenging task. In this research, we report a simple strategy to develop tin oxide (SnO₂) embedded, flexible and highly porous core-shell structured carbon nanofibers (CNFs) derived from polyacrylonitrile (PAN)/polyvinylidene fluoride (PVDF) core-shell nanofibers.

EXPERIMENT

PAN/PVDF core-shell solutions were electrospun using co-axial electrospinning process. The as spun PAN core, and PVDF shell, with an appropriate amount of SnO₂, fibers were stabilized followed by carbonization to develop SnO₂ embedded highly porous and flexible core-shell structured CNFs.

FINDINGS

The optimized CNFs membrane shows a prominent CO₂ capture capacity of 2.6 mmol g^-1 at room temperature, excellent CO₂ selectivity than N₂, and a remarkable cyclic stability. After 20 adsorption-desorption cycles, the CO₂ capture capacity retains >95% of the preliminary value showing the long-term stability and practical worth of the final product. The loading of SnO₂ nanoparticles in the carbon matrix not only enhanced the thermal stability of the precursor nanofibers, their surface characteristics, and porous structure to capture CO₂ molecules, but also improves the flexibility of the CNFs by serving as a plasticizer for single-fiber-crack connection. Meaningfully, the flexible SnO₂ embedded core-shell CNFs with excellent structural stability can prevail the limitations of annihilation and collapse of structures for conventional adsorbents, which makes them strongly useful and applicable. This research introduces a new route to produce highly porous and flexible materials as solid adsorbents for CO₂ capture.

Enhancement of CO2 capture and separation of CO2/N2 using post-synthetic modified MIL-100(Fe)

The CO₂ adsorption capacity of diethylenetriamine (DETA) incorporated MIL-100(Fe) was increased by the chemical interaction between amine and CO₂.

Preparation of high-yield N-doped biochar from nitrogen-containing phosphate and its effective adsorption for toluene

Novel biochar was prepared from plant-based biomass by the addition of nitrogen-containing phosphates (NCPs), including ammonia phosphate (AP), ammonia polyphosphate (APP) and urea phosphate (UP). The results demonstrated that with the addition of NCPs, the yield of biochar could be significantly increased from about 30% to up to about 60%. The pore structure of the biochar was significantly improved, and the AP-prepared biochar obtained a higher S_BET and V_tot of 798 m² g⁻¹ and 0.464 cm³ g⁻¹, respectively. Moreover, the surface chemistry of the NCP-prepared biochar was affected, and N heteroatoms could be successfully doped on the surface of biochar, up to 4.16%. Furthermore, through TG-FTIR and XPS analysis, some possible interactions between plant-based biomass and NCPs during the pyrolysis process were proposed to explore the mechanisms of the preparation process, including the P route and N route, in which the H₃PO₄ and NH₃ gradually generated during the heating process played the dominant roles for the high yield N-doped biochar. All the NCP-prepared biochar presented good toluene adsorption capacities from 175.9 to 496.2 mg g⁻¹, which were significantly higher than that of blank char (6.5 mg g⁻¹).

Novel biochar was prepared from plant-based biomass by the addition of nitrogen-containing phosphates (NCPs), including ammonia phosphate (AP), ammonia polyphosphate (APP) and urea phosphate (UP).

Imine-Linked Polymer Based Nitrogen-Doped Porous Activated Carbon for Efficient and Selective CO2 Capture

The preparation of nitrogen-doped activated carbon (NACs) has received significant attention because of their applications in CO2 capture and sequestration (CCS) owing to abundant nitrogen atoms on their surface and controllable pore structures by carefully controlled carbonization. We report high-surface-area porous N-doped activated carbons (NAC) by using soft-template-assisted self-assembly followed by thermal decomposition and KOH activation. The activation process was carried out under different temperature conditions (600-800 °C) using polyimine as precursor. The NAC-800 was found to have a high specific surface area (1900 m2 g-1), a desirable micropore size below 1 nm and, more importantly, a large micropore volume (0.98 cm3 g-1). NAC-800 also exhibits a significant capacity of CO2 capture i.e., over 6. 25 and 4.87 mmol g-1 at 273 K and 298 K respectively at 1.13 bar, which is one of among the highest values reported for porous carbons so far. Moreover, NAC also shows an excellent separation selectivity for CO2 over N2.

Facile Carbonization of Microporous Organic Polymers into Hierarchically Porous Carbons Targeted for Effective CO2 Uptake at Low Pressures

The advent of microporous organic polymers (MOPs) has delivered great potential in gas storage and separation (CCS). However, the presence of only micropores in these polymers often imposes diffusion limitations, which has resulted in the low utilization of MOPs in CCS. Herein, facile chemical activation of the single microporous organic polymers (MOPs) resulted in a series of hierarchically porous carbons with hierarchically meso-microporous structures and high CO2 uptake capacities at low pressures. The MOPs precursors (termed as MOP-7-10) with a simple narrow micropore structure obtained in this work possess moderate apparent BET surface areas ranging from 479 to 819 m(2) g(-1). By comparing different activating agents for the carbonization of these MOPs matrials, we found the optimized carbon matrials MOPs-C activated by KOH show unique hierarchically porous structures with a significant expansion of dominant pore size from micropores to mesopores, whereas their microporosity is also significantly improved, which was evidenced by a significant increase in the micropore volume (from 0.27 to 0.68 cm(3) g(-1)). This maybe related to the collapse and the structural rearrangement of the polymer farmeworks resulted from the activation of the activating agent KOH at high temperature. The as-made hierarchically porous carbons MOPs-C show an obvious increase in the BET surface area (from 819 to 1824 m(2) g(-1)). And the unique hierarchically porous structures of MOPs-C significantly contributed to the enhancement of the CO2 capture capacities, which are up to 214 mg g(-1) (at 273 K and 1 bar) and 52 mg g(-1) (at 273 K and 0.15 bar), superior to those of the most known MOPs and porous carbons. The high physicochemical stabilities and appropriate isosteric adsorption heats as well as high CO2/N2 ideal selectivities endow these hierarchically porous carbon materials great potential in gas sorption and separation.

Covalent Triazine-Based Frameworks with Ultramicropores and High Nitrogen Contents for Highly Selective CO2 Capture

Porous organic frameworks (POFs) are a class of porous materials composed of organic precursors linked by covalent bonds. The objective of this work is to develop POFs with both ultramicropores and high nitrogen contents for CO2 capture. Specifically, two covalent triazine-based frameworks (CTFs) with ultramicropores (pores of width <7 Å) based on short (fumaronitrile, FUM) and wide monomers (1,4-dicyanonaphthalene, DCN) were synthesized. The obtained CTF-FUM and CTF-DCN possess excellent chemical and thermal stability with ultramicropores of 5.2 and 5.4 Å, respectively. In addition, they exhibit excellent ability to selectively capture CO2 due to ultramicroporous nature. Especially, CTF-FUM-350 has the highest nitrogen content (27.64%) and thus the highest CO2 adsorption capacity (57.2 cc/g at 298 K) and selectivities for CO2 over N2 and CH4 (102.4 and 20.5 at 298 K, respectively) among all CTF-FUM and CTF-DCN. More impressively, as far as we know, the CO2/CH4 selectivity is larger than that of all reported CTFs and ranks in top 10 among all reported POFs. Dynamic breakthrough curves indicate that both CTFs could indeed separate gas mixtures of CO2/N2 and CO2/CH4 completely.

Furfuralcohol Co-Polymerized Urea Formaldehyde Resin-derived N-Doped Microporous Carbon for CO2 Capture

Carbon-based adsorbent is considered to be one of the most promising adsorbents for CO2 capture form flue gases. In this study, a series of N-doped microporous carbon materials were synthesized from low cost and widely available urea formaldehyde resin co-polymerized with furfuralcohol. These N-doped microporous carbons showed tunable surface area in the range of 416-2273 m(2) g(-1) with narrow pore size distribution within less than 1 nm and a high density of the basic N functional groups (2.93-13.92 %). Compared with the carbon obtained from urea resin, the addition of furfuralcohol apparently changed the surface chemical composition and pore size distribution, especially ultramicropores as can be deduced from the X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR), and pore size distribution measurements and led to remarkable improvement on CO2 adsorption capacity. At 1 atm, N-doped carbons activated at 600 °C with KOH/UFFC weight ratio of 2 (UFFA-2-600) showed the highest CO2 uptake of 3.76 and 1.57 mmol g(-1) at 25 and 75 °C, respectively.

Highly selective CO2 adsorption performance of carbazole based microporous polymers

Non-coplanar shaped carbazole based monomers were used to synthesize microporous polycarbazole materials utilizing an inexpensive FeCl₃ catalyzed reaction.

Molecular template-directed synthesis of microporous polymer networks for highly selective CO2 capture

Porous polymer networks have great potential in various applications including carbon capture. However, complex monomers and/or expensive catalysts are commonly used for their synthesis, which makes the process complicated, costly, and hard to scale up. Herein, we develop a molecular template strategy to fabricate new porous polymer networks by a simple nucleophilic substitution reaction of two low-cost monomers (i.e., chloromethylbenzene and ethylene diamine). The polymerization reactions can take place under mild conditions in the absence of any catalysts. The resultant materials are interconnected with secondary amines and show well-defined micropores due to the structure-directing role of solvent molecules. These properties make our materials highly efficient for selective CO2 capture, and unusually high CO2/N2 and CO2/CH4 selectivities are obtained. Furthermore, the adsorbents can be completely regenerated under mild conditions. Our materials may provide promising candidates for selective capture of CO2 from mixtures such as flue gas and natural gas.

In situ polymerization deposition of porous conducting polymer on reduced graphene oxide for gas sensor

Porous conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) nanocomposite prepared on reduced graphene oxide (RGO) film was used as efficient chemiresistor sensor platform for NO2 detection. The comparable electrical performance between RGO and porous PEDOT nanostructure, the large surface area and opening porous structure of this RGO/porous PEDOT nanocomposite resulted in excellent synergistic effect. The gas sensing performance revealed that, in contrast to bare RGO, the RGO/porous PEDOT exhibited the enhanced sensitivity (2 orders of magnitude) as well as response and recovery performance. As a result of the highly uniform distribution of PEDOT porous network and excellent synergetic effect between RGO and porous PEDOT, this nanocomposite based sensor exhibited higher selectivity to NO2 in contrast to other oxidant analyte gases, e.g., HCl, H2S and SO2.

Highly stable CO2/N2 and CO2/CH4 selectivity in hyper-cross-linked heterocyclic porous polymers

The largest obstacles for landfill/flue gas separation using microporous materials are small adsorption values and low selectivity ratios. This study demonstrates that these adsorption and selectivity challenges can be overcome by utilizing a series of hyper-cross-linked heterocyclic polymer networks. These microporous organic polymers (MOPs) were synthesized in a single step by inexpensive Friedel-Crafts-catalyzed reactions using dimethoxymethane as an external linker. The amorphous networks show moderate Brunauer-Emmett-Teller surface areas up to 1022 m(2) g(-1), a narrow pore size distribution in the range from 6 to 8 Å, and high physicochemical stability. Owing to the presence of the heteroatomic pore surfaces in the networks, they exhibit maximum storage capacities for CO2 of 11.4 wt % at 273 K and 1 atm. Additionally, remarkable selectivity ratios for CO2 adsorption over N2 (100) and CH4 (15) at 273 K were obtained. More importantly, as compared with any other porous materials, much higher selectivity for CO2/N2 (80) and CO2/CH4 (15) was observed at 298 K, showing that these selectivity ratios remain high at elevated temperature. The very high CO2/N2 selectivity values are ascribed to the binding affinity of abundantly available electron-rich basic heteroatoms, high CO2 isoteric heats of adsorption (49-38 kJ mol(-1)), and the predominantly microporous nature of the MOPs. Binding energies calculated using the high level of ab initio theory showed that the selectivity is indeed attributed to the heteroatom-CO2 interactions. By employing an easy and economical synthesis procedure these MOPs with high thermochemical stability are believed to be a promising candidate for selective CO2 capture.

Poly(vinylidene chloride)-based carbon with ultrahigh microporosity and outstanding performance for CH4 and H2 storage and CO2 capture

Poly(vinylidene chloride)-based carbon (PC) with ultrahigh microporisity was prepared by simple carbonization and KOH activation, exhibiting great potential to be superior CO2, CH4, and H2 adsorbent at high pressures. The CO2 uptake for pristine PC is highly up to 3.97 mmol/g at 25 °C and 1 bar while the activated PC exhibits a slightly lower uptake at 1 bar. However, the activated PC has an outstanding CO2 uptake of up to 18.27 mmol/g at 25 °C and 20 bar. Gas uptakes at high pressures are proportional to the surface areas of carbons. The CH4 uptake for the activated PC is up to 10.25 mmol/g (16.4 wt % or 147 v/v) at 25 °C and 20 bar which is in a top-ranked uptake for large surface area carbons. Furthermore, H2 uptake on the activated PC reaches 4.85 wt % at -196 °C and 20 bar. Significantly, an exceptionally large H2 storage capacity of up to 2.43 wt % at 1 bar was obtained, which is among the largest value reported to date for any porous adsorbents, to the best of our knowledge. The ease of preparation and large capture capacities endow this kind of carbon attractive as promising adsorbent for CH4, H2, and CO2 storage.