Modification of ozone deposition and I2 emissions at the air-aqueous interface by dissolved organic carbon of marine origin

Iodine emission from the reactive uptake of ozone to simulated seawater

The heterogeneous reaction of ozone and iodide is both an important source of atmospheric iodine and dry deposition pathway of ozone in marine environments. While the iodine generated from this reaction is primarily in the form of HOI and I2, there is also evidence of volatile organoiodide compound emissions in the presence of organics without biological activity occuring [M. Martino, G. P. Mills, J. Woeltjen and P. S. Liss, A new source of volatile organoiodine compounds in surface seawater, Geophys. Res. Lett., 2009, 36, L01609, L. Tinel, T. J. Adams, L. D. J. Hollis, A. J. M. Bridger, R. J. Chance, M. W. Ward, S. M. Ball and L. J. Carpenter, Influence of the Sea Surface Microlayer on Oceanic Iodine Emissions, Environ. Sci. Technol., 2020, 54, 13228-13237]. In this study, we evaluate our fundamental understanding of the ozonolysis of iodide which leads to gas-phase iodine emissions. To do this, we compare experimental measurements of ozone-driven gas-phase I2 formation in a flow tube to predictions made with the kinetic multilayer model for surface and bulk chemistry (KM-SUB). The KM-SUB model uses literature rate coefficients used in current atmospheric chemistry models to predict I2(g) formation in pH-buffered solutions of marine composition containing chloride, bromide, and iodide compared to solutions containing only iodide. Experimentally, I2(g) formation was found to be suppressed in solutions containing seawater levels of chloride compared to solutions containing only iodide, but the model does not predict this effect using literature rate constants. However, the model is able to predict this trend upon adjustment of two specific reaction rate constants. To more closely represent true oceanic conditions, we add an organic component to the proxy seawater solutions using material generated from Thalassiosira pseudonana phytoplankton cultures. Whereas the rate of ozone deposition is unaffected, the formation rate of I2(g) is strongly suppressed in the presence of biological organic material, indicative of a sink or reduction of reactive iodine formed during the oxidation process.

Marine iodine emissions in a changing world

Iodine is a critical trace element involved in many diverse and important processes in the Earth system. The importance of iodine for human health has been known for over a century, with low iodine in the diet being linked to goitre, cretinism and neonatal death. Research over the last few decades has shown that iodine has significant impacts on tropospheric photochemistry, ultimately impacting climate by reducing the radiative forcing of ozone (O₃) and air quality by reducing extreme O₃ concentrations in polluted regions. Iodine is naturally present in the ocean, predominantly as aqueous iodide and iodate. The rapid reaction of sea-surface iodide with O₃ is believed to be the largest single source of gaseous iodine to the atmosphere. Due to increased anthropogenic O₃, this release of iodine is believed to have increased dramatically over the twentieth century, by as much as a factor of 3. Uncertainties in the marine iodine distribution and global cycle are, however, major constraints in the effective prediction of how the emissions of iodine and its biogeochemical cycle may change in the future or have changed in the past. Here, we present a synthesis of recent results by our team and others which bring a fresh perspective to understanding the global iodine biogeochemical cycle. In particular, we suggest that future climate-induced oceanographic changes could result in a significant change in aqueous iodide concentrations in the surface ocean, with implications for atmospheric air quality and climate.

Reactive Uptake of Ozone to Simulated Seawater: Evidence for Iodide Depletion

The reaction of ozone with iodide in the ocean is a major ozone dry deposition pathway, as well as an important source of reactive iodine to the marine troposphere. Few prior laboratory experiments have been conducted with environmentally relevant ozone mixing ratios and iodide concentrations, leading to uncertainties in the rate of the reaction under marine boundary layer conditions. As well, there remains disagreement in the literature assessment of the relative contributions of an interfacial reaction via ozone adsorbed to the ocean surface versus a bulk reaction with dissolved ozone. In this study, we measure the uptake coefficient of ozone over a buffered, pH 8 salt solution replicating the concentrations of iodide, bromide, and chloride in the ocean over an ozone mixing ratio of 60-500 ppb. Due to iodide depletion in the solution, the measured ozone uptake coefficient is dependent on the exposure time of the solution to ozone and its mixing ratio. A kinetic multilayer model confirms that iodide depletion is occurring not only within ozone's reactodiffusive depth, which is on the order of microns for environmental conditions, but also deeper into the solution as well. Best model-measurement agreement arises when some degree of nondiffusive mixing is occurring in the solution, transporting iodide from deeper in the solution to a thin, diffusively mixed upper layer. If such mixing occurs rapidly in the environment, iodide depletion is unlikely to reduce ozone dry deposition rates. Unrealistically high bulk-to-interface partitioning of iodide is required for the model to predict a substantial interfacial component to the reaction, indicating that the Langmuir-Hinshelwood mechanism is not dominant under environmental conditions.

Influence of the Sea Surface Microlayer on Oceanic Iodine Emissions

The influence of organic compounds on iodine (I₂) emissions from the O₃ + I^- reaction at the sea surface was investigated in laboratory and modeling studies using artificial solutions, natural subsurface seawater (SSW), and, for the first time, samples of the surface microlayer (SML). Gas-phase I₂ was measured directly above the surface of liquid samples using broadband cavity enhanced absorption spectroscopy. I₂ emissions were consistently lower for artificial seawater (AS) than buffered potassium iodide (KI) solutions. Natural seawater samples showed the strongest reduction of I₂ emissions compared to artificial solutions with equivalent [I^-], and the reduction was more pronounced over SML than SSW. Emissions of volatile organic iodine (VOI) were highest from SML samples but remained a negligible fraction (<1%) of the total iodine flux. Therefore, reduced iodine emissions from natural seawater cannot be explained by chemical losses of I₂ or hypoiodous acid (HOI), leading to VOI. An interfacial model explains this reduction by increased solubility of the I₂ product in the organic-rich interfacial layer of seawater. Our results highlight the importance of using environmentally representative concentrations in studies of the O₃ + I^- reaction and demonstrate the influence the SML exerts on emissions of iodine and potentially other volatile species.

A kinetic model for ozone uptake by solutions and aqueous particles containing I- and Br-, including seawater and sea-salt aerosol

The heterogeneous interactions of gaseous ozone (O3) with seawater and with sea-salt aerosols are known to generate volatile halogen species, which, in turn, lead to further destruction of O3. Here, a kinetic model for the interaction of ozone (O3) with Br- and I- solutions and aqueous particles has been proposed that satisfactorily explains previous literature studies about this process. Apart from the aqueous-phase reactions X- + O3 (X = I, Br), the interaction also involves the surface reactions X- + O3 that occur via O3 adsorption on the aqueous surface. In single salt solutions and aerosols, the partial order in ozone and the total order of the surface reactions are one, but the apparent total order is second order because the number of ozone sites where reaction can occur is equal to the surficial concentration of X- ([X-]surf). In the presence of Cl-, the surface reactions are enhanced by a factor equal to , where and . Therefore, we have inferred that Cl- acts as a catalyst in the surface reactions X- + O3. The model has been applied to estimate ozone uptake by the reaction with these halides in/on seawater and in/on sea-salt aerosol, where it has been concluded that the Cl--catalyzed surface reaction is important relative to total ozone uptake and should therefore be considered to model Y/YO (Y = I, Br, Cl) levels in the troposphere.

A revisit of the interaction of gaseous ozone with aqueous iodide. Estimating the contributions of the surface and bulk reactions

The main source of atmospheric iodine is the heterogeneous reaction of aqueous iodide (I-) with ozone (O3), which takes place in surface seawater and probably in sea-salt aerosols. However, there are seemingly contradictory conclusions about whether this heterogeneous reaction occurs in the bulk of the aqueous phase, via O3 dissolution, or at the aqueous surface, via O3 adsorption. In this work, the ozone uptake coefficient has been calculated as a function of the concentration of aqueous iodide ([I-]aq) and gaseous ozone near the aqueous surface ([O3]gs) by estimating parameters of the resistor model using results of previous studies. The calculated uptake coefficients suggest that the aqueous-phase reaction dominates at low I- concentrations (about <10-4 mol L-1), regardless of [O3]gs, and also at sufficiently high [O3]gs (about >80 ppm), regardless of [I-]aq. In contrast, the surface reaction dominates at high [I-]aq (about >10-4 mol L-1) as long as [O3]gs is low enough (about <80 ppm). This trend is able to reconcile previous studies of this reaction, and is a consequence of several factors, including the high surface excess of both reactants ozone and iodide. Given the typical O3 concentrations in the troposphere and the possible I- concentrations and O3 solubilities in sea-salt aerosols, the surface reaction may compete with the aqueous-phase reaction in accumulation-mode aerosols, unlike in surface seawater, where the aqueous-phase reaction probably prevails. The rate constant of the surface reaction has been estimated as (3-40) × 10-13 cm2 molecule-1 s-1.

Water-Soluble Organic Composition of the Arctic Sea Surface Microlayer and Association with Ice Nucleation Ability

Organic matter in the sea surface microlayer (SML) may be transferred to the atmosphere as sea spray and hence influence the composition and properties of marine aerosol. Recent work has demonstrated that the SML contains material capable of heterogeneously nucleating ice, but the nature of this material remains largely unknown. Water-soluble organic matter was extracted from SML and underlying seawater from the Arctic and analyzed using a combination of mass spectrometric approaches. High performance liquid chromatography-ion trap mass spectrometry (LC-IT-MS), and Fourier transform ion cyclotron resonance MS (FT-ICR-MS), showed seawater extracts to be compositionally similar across all stations, whereas microlayer extracts had a different and more variable composition. LC-IT-MS demonstrated the enrichment of particular ions in the microlayer. Ice nucleation ability (defined as the median droplet freezing temperature) appeared to be related to the relative abundances of some ions, although the extracts themselves did not retain this property. Molecular formulas were assigned using LC-quadrupole time-of-flight MS (LC-TOF-MS²) and FT-ICR-MS. The ice nucleation tracer ions were associated with elevated biogenic trace gases, and were also observed in atmospheric aerosol collected during the summer, but not early spring suggesting a biogenic source of ice nuclei in the Arctic microlayer.

Photosensitized reactions initiated by 6-carboxypterin: singlet and triplet reactivity

The photophysical and photochemical properties of 6-carboxypterin, a model compound for the pterin derivatives present at the sea surface microlayer, were studied and its singlet and triplet reactivity toward halides and selected organics demonstrated.

Impact of Enhanced Ozone Deposition and Halogen Chemistry on Tropospheric Ozone over the Northern Hemisphere

Fate of ozone in marine environments has been receiving increased attention due to the tightening of ambient air quality standards. The role of deposition and halogen chemistry is examined through incorporation of an enhanced ozone deposition algorithm and inclusion of halogen chemistry in a comprehensive atmospheric modeling system. The enhanced ozone deposition treatment accounts for the interaction of iodide in seawater with ozone and increases deposition velocities by 1 order of magnitude. Halogen chemistry includes detailed chemical reactions of organic and inorganic bromine and iodine species. Two different simulations are completed with the halogen chemistry: without and with photochemical reactions of higher iodine oxides. Enhanced deposition reduces mean summer-time surface ozone by ∼3% over marine regions in the Northern Hemisphere. Halogen chemistry without the photochemical reactions of higher iodine oxides reduces surface ozone by ∼15% whereas simulations with the photochemical reactions of higher iodine oxides indicate ozone reductions of ∼48%. The model without these processes overpredicts ozone compared to observations whereas the inclusion of these processes improves predictions. The inclusion of photochemical reactions for higher iodine oxides leads to ozone predictions that are lower than observations, underscoring the need for further refinement of the halogen emissions and chemistry scheme in the model.