A two-stage microbial fuel cell and anaerobic fluidized bed membrane bioreactor (MFC-AFMBR) system for effective domestic wastewater treatment

Fate and mitigation of antibiotics and antibiotic resistance genes in microbial fuel cell and coupled systems

Microbial fuel cells (MFCs), known for their low energy consumption, high efficiency, and environmental friendliness, have been widely utilized for removing antibiotics from wastewater. Compared to conventional wastewater treatment methods, MFCs produce less sludge while exhibiting superior antibiotic removal capacity, effectively reducing the spread of antibiotic resistance genes (ARGs). This study investigates 1) the mechanisms of ARGs generation and proliferation in MFCs; 2) the influencing factors on the fate and removal of antibiotics and ARGs; and 3) the fate and mitigation of ARGs in MFC and MFC-coupled systems. It is indicated that high removal efficiency of antibiotics and minimal amount of sludge production contribute the mitigation of ARGs in MFCs. Influencing factors, such as cathode potential, electrode materials, salinity, initial antibiotic concentration, and additional additives, can lead to the selection of tolerant microbial communities, thereby affecting the abundance of ARGs carried by various microbial hosts. Integrating MFCs with other wastewater treatment systems can synergistically enhance their performance, thereby improving the overall removal efficiency of ARGs. Moreover, challenges and future directions for mitigating the spread of ARGs using MFCs are suggested.

Microalgae-bacteria nexus for environmental remediation and renewable energy resources: Advances, mechanisms and biotechnological applications

Microalgae and bacteria, known for their resilience, rapid growth, and proximate ecological partnerships, play fundamental roles in environmental and biotechnological advancements. This comprehensive review explores the synergistic interactions between microalgae and bacteria as an innovative approach to address some of the most pressing environmental issues and the demands of clean and renewable freshwater and energy sources. Studies indicated that microalgae-bacteria consortia can considerably enhance the output of biotechnological applications; for instance, various reports showed during wastewater treatment the COD removal efficiency increased by 40%-90.5 % due to microalgae-bacteria consortia, suggesting its great potential amenability in biotechnology. This review critically synthesizes research works on the microalgae and bacteria nexus applied in the advancements of renewable energy generation, with a special focus on biohydrogen, reclamation of wastewater and desalination processes. The mechanisms of underlying interactions, the environmental factors influencing consortia performance, and the challenges and benefits of employing these bio-complexes over traditional methods are also discussed in detail. This paper also evaluates the biotechnological applications of these microorganism consortia for the augmentation of biomass production and the synthesis of valuable biochemicals. Furthermore, the review sheds light on the integration of microalgae-bacteria systems in microbial fuel cells for concurrent energy production, waste treatment, and resource recovery. This review postulates microalgae-bacteria consortia as a sustainable and efficient solution for clean water and energy, providing insights into future research directions and the potential for industrial-scale applications.

A Review of Current Achievements and Recent Challenges in Bacterial Medium-Chain-Length Polyhydroxyalkanoates: Production and Potential Applications

Using petroleum-derived plastics has contributed significantly to environmental issues, such as greenhouse gas emissions and the accumulation of plastic waste in ecosystems. Researchers have focused on developing ecofriendly polymers as alternatives to traditional plastics to address these concerns. This review provides a comprehensive overview of medium-chain-length polyhydroxyalkanoates (mcl-PHAs), biodegradable biopolymers produced by microorganisms that show promise in replacing conventional plastics. The review discusses the classification, properties, and potential substrates of less studied mcl-PHAs, highlighting their greater ductility and flexibility compared to poly(3-hydroxybutyrate), a well-known but brittle PHA. The authors summarize existing research to emphasize the potential applications of mcl-PHAs in biomedicine, packaging, biocomposites, water treatment, and energy. Future research should focus on improving production techniques, ensuring economic viability, and addressing challenges associated with industrial implementation. Investigating the biodegradability, stability, mechanical properties, durability, and cost-effectiveness of mcl-PHA-based products compared to petroleum-based counterparts is crucial. The future of mcl-PHAs looks promising, with continued research expected to optimize production techniques, enhance material properties, and expand applications. Interdisciplinary collaborations among microbiologists, engineers, chemists, and materials scientists will drive progress in this field. In conclusion, this review serves as a valuable resource to understand mcl-PHAs as sustainable alternatives to conventional plastics. However, further research is needed to optimize production methods, evaluate long-term ecological impacts, and assess the feasibility and viability in various industries.

Biotechnology to reduce logistics burden and promote environmental stewardship for Air Force civil engineering requirements

This review provides discussion of advances in biotechnology with specific application to civil engineering requirements for airfield and airbase operations. The broad objectives are soil stabilization, waste management, and environmental protection. The biotechnology focal areas address (1) treatment of soil and sand by biomineralization and biopolymer addition, (2) reduction of solid organic waste by anaerobic digestion, (3) application of microbes and higher plants for biological processing of contaminated wastewater, and (4) use of indigenous materials for airbase construction and repair. The consideration of these methods in military operating scenarios, including austere environments, involves comparison with conventional techniques. All four focal areas potentially reduce logistics burden, increase environmental sustainability, and may provide energy source, or energy-neutral practices that benefit military operations.

Energy generation from bioelectrochemical techniques: Concepts, reactor configurations and modeling approaches

The process industries play a significant role in boosting the economy of any nation. However, poor management in several industries has been posing worrisome threats to an environment that was previously immaculate. As a result, the untreated waste and wastewater discarded by many industries contain abundant organic matter and other toxic chemicals. It is more likely that they disrupt the proper functioning of the water bodies by perturbing the sustenance of many species of flora and fauna occupying the different trophic levels. The simultaneous threats to human health and the environment, as well as the global energy problem, have encouraged a number of nations to work on the development of renewable energy sources. Hence, bioelectrochemical systems (BESs) have attracted the attention of several stakeholders throughout the world on many counts. The bioelectricity generated from BESs has been recognized as a clean fuel. Besides, this technology has advantages such as the direct conversion of substrate to electricity, and efficient operation at ambient and even low temperatures. An overview of the BESs, its important operating parameters, bioremediation of industrial waste and wastewaters, biodegradation kinetics, and artificial neural network (ANN) modeling to describe substrate removal/elimination and energy production of the BESs are discussed. When considering the potential for use in the industrial sector, certain technical issues of BES design and the principal microorganisms/biocatalysts involved in the degradation of waste are also highlighted in this review.

Simultaneous removal of sulfide and bicarbonate from synthetic wastewater using an algae-assisted microbial fuel cell

The anaerobic digestion (AD) process is one of the most practiced technologies for the remediation of organic waste and maximization of energy recovery in terms of biogas or biomethane. The presence of other gaseous components in biogas, e.g. CO2 and H2S, often makes its direct application in engines and electricity production unsuitable. This work aimed to develop and utilize an algae-assisted microbial fuel cell (AMFC) for the purification of biogas by removing both CO2 and H2S and simultaneous bioelectricity generation. In addition to biogas clean-up, elemental sulfur recovery and CO2 utilization for algae cultivation add value to the proposed AMFC process. Experiments were performed with both sulfide and bicarbonate in their dissolved form, in the respective anodic and cathodic chambers of the AMFC. The sulfide concentration was varied from 100 to 800 mg/l and the AMFC exhibited a sulfide removal efficiency exceeding 97% at all concentrations tested. The process efficiency dropped, however, at sulfide concentrations above 300 mg/l in terms of both sulfide removal and power output. The AMFC performed best at 400 mg/l sulfide by exhibiting a power density of 24.99 mW/m3 and sulfide removal efficiency of 98.87%. The system exhibited columbic efficiency (CE %) in the range of 7.85-80%. The total alkalinity representing CO2, carbonate and bicarbonate levels in the algae-based system was reduced by 49.54%. The electrical energy recovered from the AMFC was 0.1 kWh/m3 and the total energy recovery, which is the sum of the electrical and algal lipid energy, amounted to 7.25 kWh/m3.

Microbial fuel cell: Interplay of energy production, wastewater treatment, toxicity assessment with hydraulic retention time

Microbial fuel cell (MFC) operation under similar conditions to conventional methods will support the use of this technology in large-scale wastewater treatment. The operation of scaled-up air-cathode MFC (2 L) fed with synthetic wastewater (similar to domestic) in a continuous flow was evaluated using three different hydraulic retention times (HRT), 12, 8, and 4 h. We found that electricity generation and wastewater treatment could be enhanced under an HRT of 12 h. Additionally, the longer HRT led to greater coulombic efficiency (5.44%) than MFC operating under 8 h and 4 h, 2.23 and 1.12%, respectively. However, due to the anaerobic condition, the MFC was unable to remove nutrients. Furthermore, an acute toxicity test with Lactuca sativa revealed that MFC could reduce wastewater toxicity. These outcomes demonstrated that scaled-up MFC could be operated as a primary effluent treatment and transform a wastewater treatment plant (WWTP) into a renewable energy producer.

Comparative analysis of membrane fouling mechanisms induced by operation modes of membrane bioreactors with aerobic granular sludge

This experimental work investigated fouling characteristics induced by two different configurations of membrane bioreactor (MBR), which are submerged MBR and sidestream MBR with aerobic granular sludge. Submerged membrane bioreactor with granular sludge (Sub-MGSBR) ran the longest operation time 61 days with a steady overall TMP increase rate; Sidestream membrane bioreactor with granular sludge (SS-MGSBR) performed only 39 days, which exhibited Sub-MGSBR had more efficiently retarding membrane fouling. In both membrane bioreactors with flocculent sludge (MFSBRs) as a control, membrane foulants were compact, and cake resistance was the dominant fouling factor. In MGSBRs, however, pore blocking resistance turned out the key fouling factor. Especially in Sub-MGSBR, it went beyond 75%, and there was the most conglomeration of microorganisms of foulants with the highest porosity. Extracellular polymeric substances (EPS) content of foulants proved membrane fouling was hardly just for granules accumulation into cake but microorganisms' growth in MGSBRs.

Scale-up and techno-economic analysis of microbial electrolysis cells for hydrogen production from wastewater

Microbial electrolysis cells (MECs) have demonstrated high-rate H₂ production while concurrently treating wastewater, but the transition in scale from laboratory research to systems that can be practically applied has encountered challenges. It has been more than a decade since the first pilot-scale MEC was reported, and in recent years, many attempts have been made to overcome the barriers and move the technology to the market. This study provided a detailed analysis of MEC scale-up efforts and summarized the key factors that should be considered to further develop the technology. We compared the major scale-up configurations and systematically evaluated their performance from both technical and economic perspectives. We characterized how system scale-up impacts the key performance metrics such as volumetric current density and H₂ production rate, and we proposed methods to evaluate and optimize system design and fabrication. In addition, preliminary techno-economic analysis indicates that MECs can be profitable in many different market scenarios with or without subsidies. We also provide perspectives on future development needed to transition MEC technology to the marketplace.

Bioelectrochemical systems (BESs) for agro-food waste and wastewater treatment, and sustainable bioenergy-A review

Producing food by farming and subsequent food manufacturing are central to the world's food supply, accounting for more than half of all production. Production is, however, closely related to the creation of large amounts of organic wastes or byproducts (agro-food waste or wastewater) that negatively impact the environment and the climate. Global climate change mitigation is an urgent need that necessitates sustainable development. For that purpose, proper agro-food waste and wastewater management are essential, not only for waste reduction but also for resource optimization. To achieve sustainability in food production, biotechnology is considered as key factor since its continuous development and broad implementation will potentially benefit ecosystems by turning polluting waste into biodegradable materials; this will become more feasible and common as environmentally friendly industrial processes improve. Bioelectrochemical systems are a revitalized, promising biotechnology integrating microorganisms (or enzymes) with multifaceted applications. The technology can efficiently reduce waste and wastewater while recovering energy and chemicals, taking advantage of their biological elements' specific redox processes. In this review, a consolidated description of agro-food waste and wastewater and its remediation possibilities, using different bioelectrochemical-based systems is presented and discussed together with a critical view of the current and future potential applications.

Recent progress in microbial fuel cells using substrates from diverse sources

Increasing untreated environmental outputs from industry and the rising human population have increased the burden of wastewater and other waste streams on the environment. The most prevalent wastewater treatment methods include the activated sludge process, which requires aeration and is, therefore, energy and cost-intensive. The current trend towards a circular economy facilitates the recovery of waste materials as a resource. Along with the amount, the complexity of wastewater is increasing day by day. Therefore, wastewater treatment processes must be transformed into cost-effective and sustainable methods. Microbial fuel cells (MFCs) use electroactive microbes to extract chemical energy from waste organic molecules to generate electricity via waste treatment. This review focuses use of MFCs as an energy converter using wastewater from various sources. The different substrate sources that are evaluated include industrial, agricultural, domestic, and pharmaceutical types. The article also highlights the effect of operational parameters such as organic load, pH, current, and concentration on the MFC output. The article also covers MFC functioning with respect to the substrate, and the associated performance parameters, such as power generation and wastewater treatment matrices, are given. The review also illustrates the success stories of various MFC configurations. We emphasize the significant measures required to fill in the gaps related to the effect of substrate type on different MFC configurations, identification of microbes for use as biocatalysts, and development of biocathodes for the further improvement of the system. Finally, we shortlisted the best performing substrates based on the maximum current and power, Coulombic efficiency, and chemical oxygen demand removal upon the treatment of substrates in MFCs. This information will guide industries that wish to use MFC technology to treat generated effluent from various processes.

Effects of carbon source on electricity generation and PAH removal in aquaculture sediment microbial fuel cells

Sediment microbial fuel cells (SMFCs) have been used for treating pollutants in sediment or overlying water. This study investigated the feasibility of constructing SMFCs under aquaculture conditions by employing indigenous carbohydrates as substrates to enhance the removal efficiency of polycyclic aromatic hydrocarbons (PAHs) in sediment, as well as the correlation between PAHs removal and electricity generation in SMFCs. The results showed that adding glucose could allow SMFCs to generate more electrical power and increase the removal efficiency of PAHs (by 57.2% for naphthalene, 41.3% for acenaphthene, and 36.5% for pyrene). In addition, starch enhanced PAHs removal by 49.9%, 35.8%, and 31.2%, respectively, whereas cellulose enhanced removal by 44.3%, 29.3%, and 26.9%, respectively. Pearson correlation coefficients between the level of electrical power generated and the removal masses of the three PAHs were 0.485, 0.830**, and 0.851**. Thus, the use of SMFCs could be an effective approach for PAH treatment in aquaculture, and the electrical power generated could be used as an in-situ indicator for the biodegradation rate of SMFCs.

Impact of reactor configuration on pilot-scale microbial fuel cell performance

Different microbial fuel cell (MFC) configurations have been successfully operated at pilot-scale levels (>100 L) to demonstrate electricity generation while accomplishing domestic or industrial wastewater treatment. Two cathode configurations have been primarily used based on either oxygen transfer by aeration of a liquid catholyte or direct oxygen transfer using air-cathodes. Analysis of several pilot-scale MFCs showed that air-cathode MFCs outperformed liquid catholyte reactors based on power density, producing 233% larger area-normalized power densities and 181% higher volumetric power densities. Reactors with higher electrode packing densities improved performance by enabling larger power production while minimizing the reactor footprint. Despite producing more power than the liquid catholyte MFCs, and reducing energy consumption for catholyte aeration, pilot MFCs based on air-cathode configuration failed to produce effluents with chemical oxygen demand (COD) levels low enough to meet typical threshold for discharge. Therefore, additional treatment would be required to further reduce the organic matter in the effluent to levels suitable for discharge. Scaling up MFCs must incorporate designs that can minimize electrode and solution resistances to maximize power and enable efficient wastewater treatment.

A techno-economic approach for eliminating dye pollutants from industrial effluent employing microalgae through microbial fuel cells: Barriers and perspectives

Microbial fuel cells are biochemical factories which besides recycling wastewater are electricity generators, if their low power density can be scaled up. This also adds up to work on many factors responsible to increase the cost of running a microbial fuel cell. As a result, the first step is to use environment friendly dead organic algae biomass or even living algae cells in a microbial fuel cell, also referred to as microalgal microbial fuel cells. This can be a techno-economic aspect not only for treating textile wastewater but also an economical way of obtaining value added products and bioelectricity from microalgae. Besides treating wastewater, microalgae in its either form plays an essential role in treating dyes present in wastewater which essentially include azo dyes rich in synthetic ions and heavy metals. Microalgae require these metals as part of their metabolism and hence consume them throughout the integration process in a microbial fuel cell. In this review a detail plan is laid to discuss the treatment of industrial effluents (rich in toxic dyes) employing microbial fuel cells. Efforts have been made by researchers to treat dyes using microbial fuel cell alone or in combination with catalysts, nanomaterials and microalgae have also been included. This review therefore discusses impact of microbial fuel cells in treating wastewater rich in textile dyes its limitations and future aspects.

High electrical energy harvesting performance of an integrated microbial fuel cell and low voltage booster-rectifier system treating domestic wastewater

To harvest directly usable electrical energy from real domestic wastewater, a new power management system (PMS), transistor-based low voltage boosters followed by a voltage rectifier (LVBR), was developed and tested for its energy harvesting performance. Three air-cathode MFCs were individually linked with LVBs, which were electrically stacked in parallel and then connected with a single voltage rectifier (MFC-LVBR). The MFC-LVBR system could increase V_MFCto 11.9 ± 0.6 V without voltage reversal, which was capable of charging a lithium-ion batteryand supercapacitor-based power banks. When the integrated MFC-LVBR system was linked with a lithium-ion battery, the highest normalized energy recovery (NER_COD) of 0.76 kWh/kg-COD (NER_volumeof 0.22 kWh/m³) was achieved with a minimal energy loss of 14.4%, whichwas much higher than those previously reported values.Furthermore, the electrical energy charged in the lithium-ion battery successfully powered a DC peristaltic pump requiring a minimum operating power of 0.46 W.

Contribution of configurations, electrode and membrane materials, electron transfer mechanisms, and cost of components on the current and future development of microbial fuel cells

Microbial fuel cells (MFCs) are a technology that can be applied to both the wastewater treatment and bioenergy generation. This work discusses the contribution of improvements regarding the configurations, electrode materials, membrane materials, electron transfer mechanisms, and materials cost on the current and future development of MFCs. Analysis of the most recent scientific publications on the field denotes that dual-chamber MFCs configuration offers the greatest potential due to the excellent ability to be adapted to different operating environments. Carbon-based materials show the best performance, biocompatibility of carbon-brush anode favors the formation of the biofilm in a mixed consortium and in wastewater as a substrate resembles the conditions of real scenarios. Carbon-cloth cathode modified with nanotechnology favors the conductive properties of the electrode. Ceramic clay membranes emerge as an interesting low-cost membrane with a proton conductivity of 0.0817 S cm^-1, close to that obtained with the Nafion membrane. The use of nanotechnology in the electrodes also enhances electron transfer in MFCs. It increases the active sites at the anode and improves the interface with microorganisms. At the cathode, it favors its catalytic properties and the oxygen reduction reaction. These features together favor MFCs performance through energy production and substrate degradation with values above 2.0 W m^-2 and 90% respectively. All the recent advances in MFCs are gradually contributing to enable technological alternatives that, in addition to wastewater treatment, generate energy in a sustainable manner. It is important to continue the research efforts worldwide to make MFCs an available and affordable technology for industry and society.

Simultaneous removal of organic matter and nitrogen compounds by partitioned aeration in a 226 L-scale microbial fuel cell

Although microbial fuel cells (MFCs) have been widely studied as wastewater treatment technologies that convert organic matter to electricity, there are few reports of large-scale MFCs that treat both organic matter and nitrogen compounds. In this study, a 226 L reactor equipped with 27 MFC units was partially aerated at 10% of its total volume. The MFC unit consists of a cylindrical air core covered with a carbon-based air cathode, an anion exchange membrane, and a graphite non-woven fabric anode. The air-cathode MFC with 13 L min^-1 aeration rate produced a current density of 0.0012-0.15 A m^-2 with 40 to >93% biological oxygen demand (BOD) removal to have an effluent BOD of <5-36 mg L^-1 at a hydraulic retention time (HRT) of 12-47 h. Meanwhile, 55 ± 17% of the total nitrogen (TN) was removed, resulting in 9.7 ± 3.8 mg L^-1 TN in the effluent, although the TN removal was limited at ≥20 °C. The mono-exponential regression for BOD and TN (≥20 °C) estimated that an HRT of 21 h could meet the Japanese effluent quality standards of BOD and TN. Calculation of the total energy recovered via current generation and energy consumed by aeration suggested an energy consumption of 0.22 kW h m^-3. Decreasing the aeration rate and HRT in the reactor would further reduce energy consumption and increase energy production.

Long-term evaluation of an air-cathode microbial fuel cell with an anion exchange membrane in a 226L wastewater treatment reactor

Although the treatment of municipal wastewater using microbial fuel cells (MFCs) has been extensively studied, scaling the systems up for practical use remains challenging. In this study, a 226 L sewage treatment reactor was equipped with 27 MFC units, and its chemical oxygen demand (COD) removal and electricity production were evaluated. The MFC units were tubular air cores with a diameter of 5 cm and length of 100 cm, which were wrapped with a carbon-based cathode, anion exchange membrane (AEM), and nonwoven graphite fabric. The air-cathode-AEM MFC generated 0.12-0.30 A/m², 0.072-0.51 W/m³, and 1.7-4.6 Wh/m³ in a chemostat reactor with a COD of 140-36 mg/L and hydraulic retention time (HRT) of 9-42 h throughout a year. The decrease in the COD was represented as the first-order rate constant of 0.038. The rate constant was comparable to that of other air-cathode MFCs with cation exchange membranes, indicating the necessity of a posttreatment to meet the discharge standard. It has been estimated that the MFC operation for 24 h before post-aeration can reduce the energy required to meet the discharge standard by 70%, suggesting the potential applicability of MFC in long HRT-treatments such as oxidation ditch. The resistances of the anode, cathode, and AEM were 15, 7.0, and 0.51 mΩ m², respectively, and surface dirt rather than deterioration primarily increased the AEM resistance. A current exceeding 0.2 A/m² significantly increases the anode potential, indicating that the current was limited by low COD. Increasing the anode-specific surface area can improve air-AEM MFCs used for practical applications.

Effect of starch-derived organic acids on the removal of polycyclic aromatic hydrocarbons in an aquaculture-sediment microbial fuel cell

This study constructed sediment microbial fuel cells (SMFCs) for polycyclic aromatic hydrocarbons (PAHs) removal in contaminated aquaculture sediment. Starch, a waste deposited in aquaculture sediment, was employed as the co-substrate for electricity generation and PAHs removal, and the effect of starch-derived organic acids on SMFC performance was assessed. The results indicated that sufficient starch promoted PAHs removal (69.9% for naphthalene, 55.6% for acenaphthene, and 46.8% for pyrene) in dual-chamber SMFC, whereas excessive starch attenuated SMFC performance because the organic acids accumulation reduced anode pH, decreased species diversity, and changed the microbial communities. The electricity generation and PAHs removal were positively correlated (R > 0.96), and both of them were related to Macellibacteroides belonging to Bacteroidetes. However, a larger single-chamber SMFC device did not obtain enhanced PAHs removal owing to the restricted "effective range" of the anode. Hence, more challenges need to be addressed to realize the practical application of SMFC.

Sustainable strategy on microbial fuel cell to treat the wastewater for the production of green energy

Microbial fuel cell (MFC) is one of the promising alternative energy systems where the catalytic conversion of chemical energy into electrical energy takes places with the help of microorganisms. The basic configuration of MFC consists of three major components such as electrodes (anode and cathode), catalyst (microorganism) and proton transport/exchange membrane (PEM). MFC classified into four types based on the substrate utilized for the catalytic energy conversion process such as Liquid-phase MFC, Solid-phase MFC, Plant-MFC and Algae-MFC. The core performance of MFC is organic substrate oxidation and electron transfer. Microorganisms and electrodes are the key factors that decide the efficiency of MFC system for electricity generation. Microorganism catalysis degradation of organic matters and assist the electron transfer to anode surface, the conductivity of anode material decides the rate of electron transport to cathode through external circuit where electrons are reduced with hydrogen and form water with oxygen. Not limited to electricity generation, MFC also has diverse applications in different sectors including wastewater treatment, biofuel (biohydrogen) production and used as biosensor for detection of biological oxygen demand (BOD) of wastewater and different contaminants concentration in water. This review explains different types of MFC systems and their core performance towards energy conversion and waste management. Also provides an insight on different factors that significantly affect the MFC performance and different aspects of application of MFC systems in various sectors. The challenges of MFC system design, operations and implementation in pilot scale level and the direction for future research are also described in the present review.

Two-stage microbial fuel cell (MFC) and membrane bioreactor (MBR) system for enhancing wastewater treatment and resource recovery based on MFC as a biosensor

Lack of process control between the two stages of a combined microbial fuel cell-membrane bioreactor (MFC-MBR) system limits its application in wastewater treatment due to membrane fouling and high energy consumption. In this study, a two-stage MFC-MBR integrated system was established to investigate the impact of incorporating process control on petroleum refinery wastewater treatment. The results showed that chemical oxygen demand (COD) removal exhibits a linear relationship with the MFC voltage output (R² = 0.9821); therefore, the MFC was used as a biosensor to control the combined system. The removal efficiencies of COD, ammonium nitrogen (NH₄⁺-N), and total nitrogen (TN) were 96.3%, 92.4%, and 86.6%, respectively, in the MFC-MBR biosensor, whereas those in the control system were 74.7%, 71.2%, and 64.7% respectively. Furthermore，using the biosensor control system yielded a 50% reduction in the transmembrane pressure (1.01 kPa day^-1) and decreased membrane fouling in wastewater treatment. The maximum energy recovery of the biosensor system (0.00258 kWh m^-3) was five times higher than that of the control system, as determined by calculating the mass balance of the system. Thus, this study indicates that using the MFC as a biosensor for process control in an MFC-MBR system can improve overall system performance.

Microbial Fuel Cell United with Other Existing Technologies for Enhanced Power Generation and Efficient Wastewater Treatment

Nowadays, the world is experiencing an energy crisis due to extensive globalization and industrialization. Most of the sources of renewable energy are getting depleted, and thus, there is an urge to locate alternative routes to produce energy efficiently. Microbial fuel cell (MFC) is a favorable technology that utilizes electroactive microorganisms acting as a biocatalyst at the anode compartment converting organic matter present in sewage water for bioelectricity production and simultaneously treating wastewater. However, there are certain limitations with a typical stand-alone MFC for efficient energy recovery and its practical implementation, including low power output and high cost associated with treatment. There are various modifications carried out on MFC for eliminating the limitations of a stand-alone MFC. Examples of such modification include integration of microbial fuel cell with capacitive deionization technology, forward osmosis technology, anaerobic digester, and constructed wetland technology. This review describes various integrated MFC systems along with their potential application on an industrial scale for wastewater treatment, biofuel generation, and energy production. As a result, such integration of MFCs with existing systems is urgently needed to address the cost, fouling, durability, and sustainability-related issues of MFCs while also improving the grade of treatment received by effluent.

A novel fragmented anode biofilm microbial fuel cell (FAB-MFC) integrated system for domestic wastewater treatment and bioelectricity generation

BACKGROUND

The critical MFC design challenge is to increase anode surface area. A novel FAB-MFC integrated system was developed and evaluated for domestic wastewater treatment. It was operated in fed-batch flow mode at 1-3 days of HRT with 755 mg/L CODIN and 0.76 kg-COD/m3/day. The study includes anaerobic-MFC and aerobic-MFC integrated systems. Microbial electrode jacket dish (MEJ-dish) with hybrid dimension (HD) was invented, first time to authors' knowledge, to boost anode biofilm growth. The treatment system with MEJ+ (FAB) and MEJ- (MFC) anode are called FAB-MFC and MFC, respectively.

RESULTS

Fragmented variable anode biofilm thickness was observed in FAB than MFC. The FAB-MFC (FAB+) simple technique increases the anode biofilm thickness by ~ 5 times MFC. Due to HD the anode biofilm was fragmented in FAB+ system than MFC. At the end of each treatment cycle, voltage drops. All FAB+ integrated systems reduced voltage drop relative to MFC. FAB reduces voltage drops better than MFC in anaerobic-MFC from 6 to 20 mV and aerobic-MFC from 35-47 mV at 1 kΩ external load. The highest power density was achieved by FAB in anaerobic-MFC (FAB = 104 mW/m2, MFC = 98 mW/m2) and aerobic-MFC integrated system (FAB = 59 mW/m2, MFC = 42 mW/m2).

CONCLUSIONS

The ∆COD and CE between FAB and MFC could not be concluded because both setups were inserted in the same reactor. The integrated system COD removal (78-97%) was higher than the solitary MFC treatment (68-78%). This study findings support the FAB+ integrated system could be applied for real applications and improve performance. However, it might depend on influent COD, the microbial nature, and ∆COD in FAB+ and MFC, which requires further study.

Estimation of total energy requirement for sewage treatment by a microbial fuel cell with a one-meter air-cathode assuming Michaelis–Menten COD degradation

Calculations of chemical oxygen demand (COD) degradation in sewage by a microbial fuel cell (MFC) were used to estimate the total energy required for treatment of the sewage. Mono-exponential regression (MER) and the Michaelis–Menten equation (MME) were used to describe the MFC's COD removal rate (CRR). The tubular MFC used in this study (ϕ 5.0 × 100 cm) consisted of an air core surrounding a carbon-based cathode, an anion exchange membrane, and graphite non-woven fabric immersed in sewage. The MFC generated 0.26 A m⁻² of the electrode area and 0.32 W m⁻³ of the sewage water, and 3.9 W h m⁻³ in a chemostat reactor supplemented continuously with sewage containing 180 mg L⁻¹ of COD with a hydraulic retention time (HRT) of 12 h. The COD removal and coulombic efficiency (CE) were 46% and 19%, respectively, and the energy generation efficiency (EGE) was 0.054 kW h kg⁻¹-COD. The CRR and current in the MFC were strongly dependent on the COD, which could be controlled by varying the HRT. The MER model predicted first-order rate constants of 0.054 and 0.034 for reactors with and without MFC, respectively. The difference in these values indicated that using MFC significantly increased the COD removal. The results of fitting the experimental data to the MME suggested that the total COD can be separated into nondegradable CODs (C_n) and degradable CODs (C_d) via MFC. The values of CRR for C_d and CE suggest that MFC pretreatment for 12 hours prior to aeration results in a 75% decrease in net energy consumption while reducing sewage COD from 180 to 20 mg L⁻¹.

Calculations of chemical oxygen demand (COD) degradation in sewage by a microbial fuel cell (MFC) were used to estimate the total energy required for treatment of the sewage.

Novel trickling microbial fuel cells for electricity generation from wastewater

There are two main challenges associated with the scale-up of air-cathode microbial fuel cells (MFCs): performance reduction and cathode leakage/flooding. In this study, a novel 13.4 L reactor that contains 4 tubular MFCs was designed and operated in a trickling mode for 65 days under different conditions. The trickling water flow through the horizontally aligned MFCs alleviated the hydraulic pressure applied to the air-cathodes. With a total cathode working area of over 1700 cm², this reactor generated power densities up to 1 W/m² with coulombic efficiencies over 50% using acetate. Using a brewery waste stream as carbon source, an average power density of 0.27 W/m² was generated with ∼60% COD removal at hydraulic retention time of 1.6 h. The decent performance of this reactor compared with other air-cathode MFCs at the similar scale and the alleviated hydraulic pressure on air-cathodes demonstrate the great potential of this design and operation for future MFC optimization and scaling up.

Microbial electrochemistry for bioremediation

Lack of suitable electron donors or acceptors is in many cases the key reason for pollutants to persist in the environment. Externally supplementation of electron donors or acceptors is often difficult to control and/or involves chemical additions with limited lifespan, residue formation or other adverse side effects. Microbial electrochemistry has evolved very fast in the past years - this field relates to the study of electrochemical interactions between microorganisms and solid-state electron donors or acceptors. Current can be supplied in such so-called bioelectrochemical systems (BESs) at low voltage to provide or extract electrons in a very precise manner. A plethora of metabolisms can be linked to electrical current now, from metals reductions to denitrification and dechlorination. In this perspective, we provide an overview of the emerging applications of BES and derived technologies towards the bioremediation field and outline how this approach can be game changing.

Exoelectrogenic Anaerobic Granular Sludge for Simultaneous Electricity Generation and Wastewater Treatment

A thick and electroactive biofilm is the key to the successful development of microbial electrochemical systems and technologies (METs). In this study, intact anaerobic granular sludge (AGS), which is a spherical and dense microbial association, was successfully demonstrated as a novel and efficient biocatalyst in METs such as microbial fuel cells. Three different strategies were explored to shift the microbial composition of AGS from methanogenic to exoelectrogenic microbes, including varying the external resistance and organic loading and manipulating the anode potential. Among all the strategies, only with positive anode potential, AGS was successfully shifted from methanogenic to exoelectrogenic conditions, as indicated by the significantly high current response (10.32 A/m²) and 100% removal of organic carbon from wastewater. Moreover, the AGS bioanode showed no significant decrease in current generation and organic removal at pH 5, indicating good tolerance of AGS to acidic conditions. Finally, 16S rRNA sequencing revealed the enrichment of exoelectrogens and inhibition of methanogens in the microbial community of AGS after anode potential control. This study provides a proof of concept for extracting electrical energy from organic wastes by exoelectrogenic AGS along with simultaneous wastewater treatment and meanwhile opens up a new paradigm to create an efficient and cost-effective exoelectrogenic biocatalyst for boosting the industrial application of METs.

Effect of pore size on the current produced by 3-dimensional porous microbial anodes: A critical review

Microbial anodes are the cornerstone of most electro-microbial processes. Designing 3-dimensional porous electrodes to increase the surface area of the electroactive biofilm they support is a key challenge in order to boost their performance. In this context, the critical review presented here aims to assess whether an optimal range of pore size may exist for the design of microbial anodes. Pore sizes of a few micrometres can enable microbial cells to penetrate but in conditions that do not favour efficient development of electroactive biofilms. Pores of a few tens of micrometres are subject to clogging. Sizes of a few hundreds of micrometres allow penetration of the biofilm inside the structure, but its development is limited by internal acidification. Consequently, pore sizes of a millimetre or so appear to be the most suitable. In addition, a simple theoretical approach is described to establish basis for porous microbial anode design.

Community Structure Analyses of Anodic Biofilms in a Bioelectrochemical System Combined with an Aerobic Reactor

Bioelectrochemical system (BES)-based reactors have a limited range of use, especially in aerobic conditions, because these systems usually produce current from exoelectrogenic bacteria that are strictly anaerobic. However, some mixed cultures of bacteria in aerobic reactors can form surface biofilms that may produce anaerobic conditions suitable for exoelectrogenic bacteria to thrive. In this study, we combined a BES with an aerobic trickling filter (TF) reactor for wastewater treatment and found that the BES-TF setup could produce electricity with a coulombic efficiency of up to 15% from artificial wastewater, even under aerobic conditions. The microbial communities within biofilms formed at the anodes of BES-TF reactors were investigated using high throughput 16S rRNA gene sequencing. Efficiency of reduction in chemical oxygen demand and total nitrogen content of wastewater using this system was >97%. Bacterial community analysis showed that exoelectrogenic bacteria belonging to the genera Geobacter and Desulfuromonas were dominant within the biofilm coating the anode, whereas aerobic bacteria from the family Rhodocyclaceae were abundant on the surface of the biofilm. Based on our observations, we suggest that BES-TF reactors with biofilms containing aerobic bacteria and anaerobic exoelectrogenic bacteria on the anodes can function in aerobic environments.

A Review on Microbial Electrocatalysis Systems Coupled with Membrane Bioreactor to Improve Wastewater Treatment

Microbial electrocatalysis is an electro reaction that uses microorganisms as a biocatalyst, mainly including microbial electrolytic cells (MEC) and microbial fuel cells (MFC), which has been used for wastewater treatment. However, the low processing efficiency is the main drawback for its practical application and the additional energy input of MEC system results in high costs. Recently, MFC/MEC coupled with other treatment processes, especially membrane bioreactors (MBR), has been used for high efficiency and low-cost wastewater treatment. In these systems, the wastewater treatment efficiency can be improved after two units are operated and the membrane fouling of MBR can also be alleviated by the electric energy that was generated in the MFC. In addition, the power output of MFC can also reduce the energy consumption of microbial electrocatalysis systems. This review summarizes the recent studies about microbial electrocatalysis systems coupled with MBR, describing the combination types and microorganism distribution, the advantages and limitations of the systems, and also addresses several suggestions for the future development and practical applications.

A spontaneous electric field membrane bioreactor with the innovative Cu-nanowires conductive microfiltration membrane for membrane fouling mitigation and pollutant removal

In this study, a spontaneous electric field membrane bioreactor (SEF-MBR), equipped with the innovative Cu-nanowires conductive microfiltration membrane, was developed to achieve membrane fouling mitigation and high-quality effluent. The membrane fouling was significantly mitigated due to the presence of spontaneous electric field that the intensity of the spontaneous electric field in the established SEF-MBR was up to 0.073 V/cm. After over 2-month operation, the membrane flux of SEF-MBR was 2.1 times that of the control reactor. The thickness of fouling layer on the Cu-nanowires conductive membrane surface was about 80 μm, which was far thinner than that on the surface of commercial polyvinylidene fluoride (PVDF) membrane. Meanwhile, it was featured with the lower microbe density and extracellular polymeric substance (EPS) content. The effluent quality of SEF-MBR met the first-class discharge standards, and the removal rates were 94.5% for chemical oxygen demand (COD), 99.8% for NH 4 + - N , 78.5% for total nitrogen (TN), and 86.6% for total phosphorus (TP). The established system with the innovative Cu-nanowires conductive membrane showed a promising prospect for using the spontaneous electric field to mitigate membrane fouling and achieve high-quality effluent without extra power consumption. PRACTITIONER POINTS: The innovative Cu-NWs conductive microfiltration membrane was prepared. The spontaneous electric field in the novel SEF-MBR mitigated membrane fouling. The fouling layer of the novel SEF-MBR was thinner with lower microbe and EPS content. The effluent quality of the novel SEF-MBR met the first-class discharge standard.

Biofouling effects on the performance of microbial fuel cells and recent advances in biotechnological and chemical strategies for mitigation

The occurrence of biofouling in MFC can cause severe problems such as hindering proton transfer and increasing the ohmic and charge transfer resistance of cathodes, which results in a rapid decline in performance of MFC. This is one of the main reasons why scaling-up of MFCs has not yet been successfully accomplished. The present review article is a wide-ranging attempt to provide insights to the biofouling mechanisms on surfaces of MFC, mainly on proton exchange membranes and cathodes, and their effects on performance of MFC based on theoretical and practical evidence. Various biofouling mitigation techniques for membranes are discussed, including preparation of antifouling composite membranes, modification of the physical and chemical properties of existing membranes, and coating with antifouling agents. For cathodes of MFC, use of Ag nanoparticles, Ag-based composite nanoparticles, and antifouling chemicals is outlined in considerable detail. Finally, prospective techniques for mitigation of biofouling are discussed, which have not been given much previous attention in the field of MFC research. This article will help to enhance understanding of the severity of biofouling issues in MFCs and provides up-to-date solutions. It will be beneficial for scientific communities for further strengthening MFC research and will also help in progressing this cutting-edge technology to scale-up, using the most efficient methods as described here.

Anaerobic membrane bioreactors for wastewater treatment: Novel configurations, fouling control and energy considerations

Water shortage, public health and environmental protection are key motives to treat wastewater. The widespread adoption of wastewater as a resource depends upon development of an energy-efficient technology. Anaerobic membrane bioreactor (AnMBR) technology has gained increasing popularity due to their ability to offset the disadvantages of conventional treatment technologies. However there are several hurdles, yet to climb over, for wider spread and scale-up of the technology. This paper reviews fundamental aspects of anaerobic digestion of wastewater, and identifies the challenges and opportunities to the further development of AnMBRs. Membrane fouling and its implications are discussed, and strategies to control membrane fouling are proposed. Novel AnMBR configurations are discussed as an integrated approach to overcome technology limitations. Energy demand and recovery in AnMBRs is analyzed. Finally key issues that require urgent attention to facilitate global penetration of AnMBR technology are highlighted.

Induction of cathodic voltage reversal and hydrogen peroxide synthesis in a serially stacked microbial fuel cell

We developed an innovative strategy to address the inhibition of anode-respiring bacteria due to voltage reversal in serially stacked microbial fuel cells by inducing cathodic voltage reversal and H₂O₂ production. When platinum-coated carbon (Pt/C) cathodes were employed (stacked MFC_Pt/C) and the MFC was operated with acetate medium, the last unit (MFC 4) caused a voltage reversal of -0.8 V with a substantial anode overpotential of 1.22 V. After replacing the Pt/C cathode with a Pt-free carbon gas diffusion electrode in MFC 4, an electrode overpotential, approximately 0.5 V, was shifted from the anode to the cathode, inducing cathodic voltage reversal. Under cathodic voltage reversal, MFC 4 generated H₂O₂ at a production rate of 117 mg H₂O₂/m²-h. Hence, under cathodic voltage reversal induced by Pt-free cathodes, due to less anode polarization, the anode-respiring activity can largely be sustained in a stacked MFC that treats organic wastewater consistently and the quality of treated wastewater may be improved with energy-efficient and on-site generated H₂O₂.

A proof of concept study for wastewater reuse using bioelectrochemical processes combined with complementary post-treatment technologies

This article describes a proof-of-concept study designed for the reuse of wastewater using microbial electrochemical cells (MECs) combined with complementary post-treatment technologies. This study mainly focused on how the integrated approach works effectively for wastewater reuse. In this study, microalgae and ultraviolet C (UVC) light were used for advanced wastewater treatment to achieve site-specific treatment goals such as agricultural reuse and aquifer recharge. The bio-electrosynthesis of H₂O₂ in MECs was carried out based on a novel concept to integrate with UVC, especially for roust removal of trace organic compounds (TOrCs) resistant to biodegradation, and the algal treatment was configured for nutrient removal from MEC effluent. UVC irradiation has also proven to be an effective disinfectant for bacteria, protozoa, and viruses in water. The average energy consumption rate for MECs fed acetate-based synthetic wastewater was 0.28±0.01 kWh per kg of H₂O₂, which was significantly more efficient than are conventional electrochemical processes. MECs achieved 89±2% removal of carbonaceous organic matter (measured as chemical oxygen demand) in the wastewater (anolyte) and concurrent production of H₂O₂ up to 222±11 mg L^-1 in the tapwater (catholyte). The nutrients (N and P) remaining after MECs were successfully removed by subsequent phycoremediation with microalgae when aerated (5% CO₂, v/v) in the light. This complied with discharge permits that limit N to 20 mg L^-1 and P to 0.5 mg L^-1 in the effluent. H₂O₂ produced on site was used to mediate photolytic oxidation with UVC light for degradation of recalcitrant TOrCs in the algal-treated wastewater. Carbamazepine was used as a model compound and was almost completely removed with an added 10 mg L^-1 of H₂O₂ at a UVC dose of 1000 mJ cm^-2. These results should not be generalized, but critically discussed, because of the limitations of using synthetic wastewater.

Field tests of cubic-meter scale microbial electrochemical system in a municipal wastewater treatment plant

A pilot microbial electrochemical system (MES) system with a total volume of 1.5 m³ was developed and operated outdoor in a municipal wastewater treatment plant (WWTP). Microbial separator based on the dynamic biofilm on low-cost porous matrix was applied to replace ion exchange membranes (IEMs), while the separate plug-in module architecture allowed the totally 336 pairs of MES units and 14 separator modules to be integrated into one wastewater tank. The separator layer equally divided the wastewater tank into 7 cathodic and 8 anodic compartments. Fed with primary sedimentation tank effluent of WWTP, the pilot MES achieved stable removal efficiency for chemical oxygen demand (91 ± 3%), total nitrogen (64 ± 2%) and ammonium nitrogen (91 ± 3%), which were complied with the first grade A standard of pollutants for municipal wastewater treatment plant (DSPMWTP) in China. The stable power output of pilot MES was 406 ± 30 mW m^-3 based on effective liquid volume, or energy conversion performance of 2.03 × 10^-3 kWh m^-3 (one cubic meter of influent wastewater). The pilot MES achieved much lower effluent COD of 25 ± 7 mg L^-1 with HRT of 5 h, while that of activated sludge process in WWTP was 43 ± 6 mg L^-1 under HRT of 12 h. Even though the aeration of biocathode demanded a net electricity consumption of 3.44 × 10^-3 kWh m^-3, the low operation energy requirement for pilot MES was only 12% of that in a typical activated sludge process (0.3 kWh m^-3). By avoiding the utilization of IEMs and redundant structural materials, the pilot MES achieved a low system cost of $1702.1 (or $1135 m^-3) as well and promoted the further real-world application of MES.

Membrane Fouling Potentials of an Exoelectrogenic Fouling-Causing Bacterium Cultured With Different External Electron Acceptors

Integrated microbial fuel cell (MFC) and membrane bioreactor (MBR) systems are a promising cost-effective and energy-saving technology for wastewater treatment. Membrane fouling is still an important issue of such integrated systems in which aeration (oxygen) is replaced with anode electrodes (anodic respiration). Here, we investigated the effect of culture conditions on the membrane fouling potential of fouling-causing bacteria (FCB). In the present study, Klebsiella quasipneumoniae strain S05, which is an exoelectrogenic FCB isolated from a MBR treating municipal wastewater, was cultured with different external electron acceptors (oxygen, nitrate, and solid-state anode electrode). As results, the fouling potential of S05 was lowest when cultured with anode electrode and highest without any external electron acceptor (p < 0.05, respectively). The composition of soluble microbial products (SMP) and extracellular polymeric substances (EPS) was also dependent on the type of electron acceptor. Protein and biopolymer contents in SMP were highly correlated with the fouling potential (R² = 0.73 and 0.81, respectively). Both the fouling potential and yield of protein and biopolymer production were significantly mitigated by supplying electron acceptors sufficiently regardless of its types. Taken together, the aeration of MBR could be replaced with solid-state anode electrodes without enhancement of membrane fouling, and the anode electrodes must be placed sufficiently to prevent the dead spaces in the integrated reactor.

Anaerobic membrane bioreactors for antibiotic wastewater treatment: Performance and membrane fouling issues

Antibiotic wastewater has become a major concern due to the toxicity and recalcitrance of antibiotics. Anaerobic membrane bioreactors (AnMBRs) are considered alternative technology for treating antibiotic wastewater because of their advantages over the conventional anaerobic processes and aerobic MBRs. However, membrane fouling remains the most challenging issue in the AnMBRs' operation and this limits their application. This review critically discusses: (i) antibiotics removal and antibiotic resistance genes (ARGs) in different types of AnMBRs and the impact of antibiotics on membrane fouling and (ii) the integrated AnMBRs systems for fouling control and removal of antibiotics. The presence of antibiotics in AnMBRs could aggravate membrane fouling by influencing fouling-related factors (i.e., sludge particle size, extracellular polymeric substances (EPS), soluble microbial products (SMP), and fouling-related microbial communities). Conclusively, integrated AnMBR systems can be a practical technology for antibiotic wastewater treatment.