Diurnal cycles of acrolein and other small aldehydes in regions impacted by vehicle emissions

Assessing the role of mineral particles in the atmospheric photooxidation of typical carbonyl compound

Mineral particles are ubiquitous in the atmosphere and exhibit an important effect on the photooxidation of volatile organic compounds (VOCs). However, the role of mineral particles in the photochemical oxidation mechanism of VOCs remains unclear. Hence, the photooxidation reactions of acrolein (ARL) with OH radical (OH) in the presence and absence of SiO₂ were investigated by theoretical approach. The gas-phase reaction without SiO₂ has two distinct pathways (H-abstraction and OH-addition pathways), and carbonyl-H-abstraction is the dominant pathway. In the presence of SiO₂, the reaction mechanism is changed, i.e., the dominant pathway from carbonyl-H-abstraction to OH-addition to carbonyl C-atom. The energy barrier of OH-addition to carbonyl C-atom deceases 21.33 kcal/mol when SiO₂ is added. Carbonyl H-atom of ARL is occupied by SiO₂ via hydrogen bond, and carbonyl C-atom is activated by SiO₂. Hence, the main product changes from H-abstraction product to OH-adduct in the presence of SiO₂. The OH-adduct exhibits a thermodynamic feasibility to yield HO₂ radical and carboxylic acid via the subsequent reactions with O₂, with implications for O₃ formation and surface acidity of mineral particles.

Analysis of Carbonyl Compounds in Ambient Air by a Microreactor Approach

Aldehydes including formaldehyde, acetaldehyde, and acrolein are toxic organic components of air pollution that cause lung cancer and cardiovascular disease with chronic exposure. The commonly used method for determining the levels of carbonyl compounds based on the derivatizing agent 2,4-dinitrophenylhydrazine is of limited use for ketones and unsaturated aldehydes because of issues such as low capture efficiencies, unstable derivatives, and long sample collection times. This work details the analysis of carbonyls in ambient air by a microreactor approach. The microreactor is fabricated on a silicon wafer and has thousands of micropillars in a microfluidic channel for uniformly distributing the air flow through the channel. The surfaces of the micropillars are coated with a quaternary ammonium aminooxy reagent, 2-(aminooxy)ethyl-N,N,N-trimethylammonium iodide (ATM), for chemoselective capture of carbonyl compounds by means of oximation reactions. ATM-carbonyl adducts are eluted from the microreactor and directly analyzed by Fourier transform ion cyclotron resonance mass spectrometry and ultrahigh-performance liquid chromatography-mass spectrometry. More than 20 carbonyls were detected in ambient air samples. Acetone, 2-butanone, acetaldehyde, and formaldehyde were the most abundant carbonyls in ambient air of the studied urban areas.

Analysis of Carbonyl Compounds in Ambient Air by a Microreactor Approach

Aldehydes including formaldehyde, acetaldehyde, and acrolein are toxic organic components of air pollution that cause lung cancer and cardiovascular disease with chronic exposure. The commonly used method for determining the levels of carbonyl compounds based on the derivatizing agent 2,4-dinitrophenylhydrazine is of limited use for ketones and unsaturated aldehydes because of issues such as low capture efficiencies, unstable derivatives, and long sample collection times. This work details the analysis of carbonyls in ambient air by a microreactor approach. The microreactor is fabricated on a silicon wafer and has thousands of micropillars in a microfluidic channel for uniformly distributing the air flow through the channel. The surfaces of the micropillars are coated with a quaternary ammonium aminooxy reagent, 2-(aminooxy)ethyl-N,N,N-trimethylammonium iodide (ATM), for chemoselective capture of carbonyl compounds by means of oximation reactions. ATM-carbonyl adducts are eluted from the microreactor and directly analyzed by Fourier transform ion cyclotron resonance mass spectrometry and ultrahigh-performance liquid chromatography-mass spectrometry. More than 20 carbonyls were detected in ambient air samples. Acetone, 2-butanone, acetaldehyde, and formaldehyde were the most abundant carbonyls in ambient air of the studied urban areas.

Proteomic identification of moesin upon exposure to acrolein

Background

Acrolein (allyl Aldehyde) as one of smoke irritant exacerbates chronic airway diseases and increased in sputum of patients with asthma and chronic obstructive lung disease. But underlying mechanism remains unresolved. The aim of study was to identify protein expression in human lung microvascular endothelial cells (HMVEC-L) exposed to acrolein.

Methods

A proteomic approach was used to determine the different expression of proteins at 8 h and 24 h after treatment of acrolein 30 nM and 300 nM to HMVEC-L. Treatment of HMVEC-L with acrolein 30 nM and 300 nM altered 21 protein spots on the two-dimensional gel, and these were then analyzed by MALDI-TOF MS.

Results

These proteins included antioxidant, signal transduction, cytoskeleton, protein transduction, catalytic reduction. The proteins were classified into four groups according to the time course of their expression patterns such as continually increasing, transient increasing, transient decreasing, and continually decreasing. For validation immunohistochemical staining and Western blotting was performed on lung tissues from acrolein exposed mice. Moesin was expressed in endothelium, epithelium, and inflammatory cells and increased in lung tissues of acrolein exposed mice compared with sham treated mice.

Conclusions

These results indicate that some of proteins may be an important role for airway disease exacerbation caused by acrolein exposure.

Electronic supplementary material

The online version of this article (10.1186/s12953-017-0130-4) contains supplementary material, which is available to authorized users.

Aldehydes in Relation to Air Pollution Sources: A Case Study around the Beijing Olympics

This study was carried out to characterize three aldehydes of health concern (formaldehyde, acetaldehyde, and acrolein) at a central Beijing site in the summer and early fall of 2008 (from June to October). Aldehydes in polluted atmospheres come from both primary and secondary sources, which limits the control strategies for these reactive compounds. Measurements were made before, during, and after the Beijing Olympics to examine whether the dramatic air pollution control measures implemented during the Olympics had an impact on concentrations of the three aldehydes and their underlying primary and secondary sources. Average concentrations of formaldehyde, acetaldehyde and acrolein were 29.3±15.1 μg/m3, 27.1±15.7 μg/m3 and 2.3±1.0 μg/m3, respectively, for the entire period of measurements, all being at the high end of concentration ranges measured in cities around the world in photochemical smog seasons. Formaldehyde and acrolein increased during the pollution control period compared to the pre-Olympic Games, followed the changing pattern of temperature, and were significantly correlated with ozone and with a secondary formation factor identified by principal component analysis (PCA). In contrast, acetaldehyde had a reduction in mean concentration during the Olympic air pollution control period compared to the pre-Olympic period and was significantly correlated with several pollutants emitted from local emission sources (e.g., NO2, CO, and PM2.5). Acetaldehyde was also more strongly associated with primary emission sources including vegetative burning and oil combustion factors identified through the PCA. All three aldehydes were lower during the post-Olympic sampling period compared to the before and during Olympic periods, likely due to seasonal and regional effects. Our findings point to the complexity of source control strategies for secondary pollutants.

A quantum Monte Carlo study of the reactions of CH with acrolein

To assist understanding of combustion processes, we have investigated reactions of methylidyne (CH) with acrolein (CH2CHCHO) using the quantum Monte Carlo (QMC) and other computational methods. We present a theoretical study of the major reactions reported in a recent experiment on the subject system. Both DFT and MP2 computations are carried out, and the former approach is used to form the independent-particle part of the QMC trial wave function used in the diffusion Monte Carlo (DMC) variant of the QMC method. In agreement with experiment, we find that the dominant product channel leads to formation of C4H4O systems + H with leading products of furan + H and 1,3-butadienal + H. Equilibrium geometries, atomization energies, reaction barriers, transition states, and heats of reaction are computed using the DFT, MP2, and DMC approaches and compared to experiment. We find that DMC results are in close agreement with experiment. The kinetics of the subject reactions are determined by solving master equations with the MultiWell software suite.

Ambient acrolein concentrations in coastal, remote, and urban regions in California

Acrolein (2-propenal) is a reactive chemical that is very toxic and has many sources. Acrolein is commonly detected in the atmosphere, but understanding the ambient concentrations of this compound has been hampered by analytical difficulties. The objective of this research was to utilize an analytical method specifically designed for acrolein to determine acrolein concentrations in remote regions. The purpose was to determine the natural background concentrations of acrolein which were simply lacking in the literature. In addition, rural and urban areas were sampled to determine the degree of anthropogenic enrichment in polluted environments. The results from the coastal and remote inland areas suggest that the median natural summertime background of acrolein was near 40 ng/m(3), which was higher than the Environmental Protection Agency's Reference Concentration (RfC) of 20 ng/m(3). Acrolein concentrations in urban areas were approximately 3- to 8-fold higher than background concentrations, which was a lower degree of urban enrichment than expected. The results suggest that additional research is needed to understand the natural background concentrations of acrolein.

Emissions of acrolein and other aldehydes from biodiesel-fueled heavy-duty vehicles

Aldehyde emissions were measured from two heavy-duty trucks, namely 2000 and 2008 model year vehicles meeting different EPA emission standards. The tests were conducted on a chassis dynamometer and emissions were collected from a constant volume dilution tunnel. For the 2000 model year vehicle, four different fuels were tested, namely California ultralow sulfur diesel (CARB ULSD), soy biodiesel, animal biodiesel, and renewable diesel. All of the fuels were tested with simulated city and high speed cruise drive cycles. For the 2008 vehicle, only soy biodiesel and CARB ULSD fuels were tested. The research objective was to compare aldehyde emission rates between (1) the test fuels, (2) the drive cycles, and (3) the engine technologies. The results showed that soy biodiesel had the highest acrolein emission rates while the renewable diesel showed the lowest. The drive cycle also affected emission rates with the cruise drive cycle having lower emissions than the urban drive cycle. Lastly, the newer vehicle with the diesel particulate filter had greatly reduced carbonyl emissions compared to the other vehicles, thus demonstrating that the engine technology had a greater influence on emission rates than the fuels.

Acrolein - a pulmonary hazard

Acrolein is a respiratory irritant that can be generated during cooking and is in environmental tobacco smoke. More plentiful in cigarette smoke than polycyclic aromatic hydrocarbons (PAH), acrolein can adduct tumor suppressor p53 (TP53) DNA and may contribute to TP53-mutations in lung cancer. Acrolein is also generated endogenously at sites of injury, and excessive breath levels (sufficient to activate metalloproteinases and increase mucin transcripts) have been detected in asthma and chronic obstructive pulmonary disease (COPD). Because of its reactivity with respiratory-lining fluid or cellular macromolecules, acrolein alters gene regulation, inflammation, mucociliary transport, and alveolar-capillary barrier integrity. In laboratory animals, acute exposures have lead to acute lung injury and pulmonary edema similar to that produced by smoke inhalation whereas lower concentrations have produced bronchial hyperreactivity, excessive mucus production, and alveolar enlargement. Susceptibility to acrolein exposure is associated with differential regulation of cell surface receptor, transcription factor, and ubiquitin-proteasome genes. Consequent to its pathophysiological impact, acrolein contributes to the morbidly and mortality associated with acute lung injury and COPD, and possibly asthma and lung cancer.