Photodynamic properties and photoantimicrobial action of electrochemically generated porphyrin polymeric films

Light-activated antimicrobial coatings: the great potential of organic photosensitizers

Contamination of inanimate surfaces with microorganisms is considered one of the routes for transmission of pathogens, which is a matter of concern not only in healthcare-related facilities, but also in public areas. Durable antimicrobial coatings have emerged as the one of most promising strategies for reducing the accumulation of microorganisms on high-touch surfaces. Light-activated antimicrobial layers are of particular interest for such a purpose, as they generate singlet oxygen and other reactive oxygen species that are effective against a broad spectrum of bacteria, viruses, and fungi. In this review, the antimicrobial coatings containing organic photosensitizers are discussed, focusing on the recent advances in the strategies for PSs' immobilization on solid surfaces. The review attempts to assess the advantages and limitations of those systems, and the challenges that still need to be overcome.

Synthesis, Optical Properties, and Electrochemical Behavior of 5,10,15,20-Tetraaryl-5,15-diazaporphyrin-Amine Hybrids

This work reports a series of covalently linked hybrids comprising 5,10,15,20-tetraaryl-5,15-diazaporphyrinoids (M-TADAP; M = Ni, Zn, Cu) and amines. M-TADAP-amine hybrids were prepared via the metal-templated cyclization of the corresponding metal(II)-dipyrrin complexes and redox reactions on the DAP unit. In the UV/vis/near-IR absorption spectra of the hybrids containing an 18π-electron DAP ring, broad charge-transfer bands were observed, reflecting the electron-donating property of the para-aminophenyl groups and the electron-accepting property of the 18π TADAP dication. The electrochemical behavior of the M-TADAP-amine hybrids was strongly dependent on the structure of the peripheral amine units. Further electrochemical oxidation of the hybrids bearing N-Ph groups conceivably generated amine-centered radicals, which sequentially underwent irreversible coupling to form benzidine-linked M-TADAP polymer films. The Ni-TADAP-benzidine polymer exhibited the electric conductivity of 1×10^-3  S m^-1 .

Photoactive antimicrobial coating based on a PEDOT-fullerene C60 polymeric dyad

A photostable and photodynamic antimicrobial surface was successfully obtained and applied to photoinactivate microorganisms. This approach was based on the synthesis of a fullerene C60 derivative (EDOT-C60) where fullerene C60 is covalently linked to 3,4-ethylenedioxythiophene (EDOT) through a 1,3-dipolar cycloaddition reaction. This dual-functional monomer bears an EDOT center connected via an alkyl chain to a fullerene C60 moiety. In this structure, EDOT acts as an electropolymerizable unit that allows the film formation over conducting substrates, while fullerene C60 performs the photodynamic antimicrobial activity. Electrochemical polymerization of EDOT was used to obtain stable and photodynamic polymeric films (PEDOT-C60) in a controllable procedure. Cyclic voltammetry and UV-visible spectroscopy studies showed that the fullerene C60 units were not altered during the electropolymerization process, obtaining surfaces with high fullerene content. Photobleaching measurements demonstrated that the electropolymerized films were highly photostable. Moreover, photodynamic properties of PEDOT-C60 were compared with fullerene C60 and showed that electrodeposited films were able to generate reactive oxygen species (ROS) through the two photomechanisms, producing singlet molecular oxygen (type II) and superoxide radical anion (type I). All studies demonstrated that fullerene C60 moieties covalently attached to the polymeric matrix mainly conserve the photodynamic characteristics. Hence, photodynamic action sensitized by PEDOT-C60 was assessed in vitro against Staphylococcus aureus. The photosensitized inactivation by the electropolymerized films on bacteria suspensions produced >99.9% reduction in S. aureus survival. Fluorescence microscopy experiments with S. aureus adhered to the PEDOT-C60 surface showed a complete microbe annihilation. Also, the eradication of biofilms formed on PEDOT-C60 surfaces resulted in a photokilling >99.9% after visible light irradiation. Our results demonstrated that these antimicrobial photodynamic polymeric films are a promising and versatile platform to photoinactivate microorganisms and to obtain photostable self-sterilizing surfaces.

An insight into curcumin-based photosensitization as a promising and green food preservation technology

Consumer awareness on the side effects of chemical preservatives has increased the demand for natural preservation technologies. An efficient and sustainable alternative to current conventional preservation techniques should guarantee food safety and retain its quality with minimal side effects. Photosensitization, utilizing light and a natural photosensitizer, has been postulated as a viable and green alternative to the current conventional preservation techniques. The potential of curcumin as a natural photosensitizer is reviewed in this paper as a practical guide to develop a safe and effective decontamination tool for industrial use. The fundamentals of the photosensitization mechanism are discussed, with the main emphasis on the natural photosensitizer, curcumin, and its application to inactivate microorganisms as well as to enhance the shelf life of foods. Photosensitization has shown promising results in inactivating a wide spectrum of microorganisms with no reported microbial resistance due to its particular lethal mode of targeting nucleic acids. Curcumin as a natural photosensitizer has recently been investigated and demonstrated efficacy in decontamination and delaying spoilage. Moreover, studies have shown the beneficial impact of an appropriate encapsulation technique to enhance the cellular uptake of photosensitizers, and therefore, the phototoxicity. Further studies relating to improved delivery of natural photosensitizers with inherent poor solubility should be conducted. Also, detailed studies on various food products are warranted to better understand the impact of encapsulation on curcumin photophysical properties, photo-driven release mechanism, and nutritional and organoleptic properties of treated foods.

Imprinting Pentaphyrin on Conductive Electropolymerized Dipyrromethane Films: A New Strategy towards the Synthesis of Photokilling Materials

We report herein the synthesis and photoinduced bactericidal activity of two new polymeric materials, obtained by imprinting the photosensitizer 20-(4-carboxyphenyl)-2,13-dimethyl-3,12-diethyl-[22]pentaphyrin (PCox, 1) into suitable electropolymerized dipyrromethane films. 5-Phenyl-dipyrromethane (5-ph-DP) and 5-(4-pyridyl)dipyrromethane (5-py-DP) have been selected as the monomers for the synthesis of the materials in order to assess the correlation between the substituent in C5 and the capability in Pcox uptake. Both films have been tested in their photokilling ability toward Staphylococcus aureus by using a multi-LED blue lamp at a fluence rate of 40 W/m² . Poly-5-py-DP/PCox, with a PCox load of 10^-8  mol/cm² , achieved a 4-log reduction in microbial viability after 60 min of irradiation. The polymeric films proved to be stable over time and under oxidation conditions; in addition, no loss of photosensitizer was observed during the experiments, thus demonstrating that the bactericidal action was effectively brought by the ROS generated by PCox immobilized in the material. After use, the films were recharged with PCox, with almost complete recovery of their photodynamic efficiency.

Recent advances in metalloporphyrins for environmental and energy applications

Porphyrin-based chemistry has reached an unprecedented period of rapid development after decades of study. Due to attractive multifunctional properties, porphyrins and their analogues have emerged as multifunctional organometals for environmental and energy purposes. In particular, pioneer works have been conducted to explore their application in pollution abatement, energy conversion and storage and molecule recognition. This review summarizes recent advances of porphyrins chemistry, focusing on elucidating the nature of catalytic process. The Fenton-like redox chemistry and photo-excitability of porphyrins and their analogues are discussed, highlighting the generation of high-valent iron oxo porphyrin species. Finally, challenges in current research are identified and perspectives for future development in this area are presented.

Size and Substitution Effect on Antimicrobial Activity of Polythiophene Polyelectrolyte Derivatives Under Photolysis and Dark Conditions

Cationic polythiophenes have been shown to be potent antimicrobial compounds due to their ability to absorb visible light and sensitize the production of reactive oxygen species (ROS) as well as their ability to selectively associate with and damage negatively charged cell envelopes. This study demonstrates the ability of differentially sized imidazolium- and tertiary amine-functionalized poly(3-hexylthiophene) (P3HT) to inactivate Gram-negative Escherichia coli and Gram-positive Bacillus atrophaeus under photolysis and dark conditions. Flow cytometry viability assays are used to quantify cell death. Each compound shows high levels of killing at both 1 and 10 μg mL^-1 polymer concentrations for each microbial species after photoactivation as well as high levels of dark inactivation in many cases. Tertiary amine-functionalized P3HT is shown to have different killing patterns, shown by transmission electron microscopy, compared to the imidazolium-functionalized derivatives.

Responses of an adventitious fast-growing plant to photodynamic stress: comparative study of anionic and cationic porphyrin effect on Arabidopsis thaliana

Antimicrobial photodynamic treatment (APDT) based on the use of a photosensitizer to produce reactive oxygen species (ROS) that induce cell death could be envisaged to fight against plant pathogens. For setting this strategy, we want to study how plants themselves respond to photodynamic treatment. In previous work we showed that tomato plantlets were able to resist photoactivated tetra (N-methylpyridyl) porphyrin (CP) or the zinc metalated form (CP-Zn). To enlarge our plant expertise related to exogenous porphyrins treatment and to further defend this approach, we studied how a weed like Arabidopsis thaliana responded to exogenous supply of anionic and cationic porphyrins. Both types of photosensitizers had no negative effect on seed germination and did not hamper the development etiolated Arabidopsis plantlet under dark conditions. Thus, post-emergence effects of porphyrin photoactivation on the development of 14 day-old in vitro Arabidopsis plantlet under light were observed. CP-Zn was the most efficient photosensitizer to kill Arabidopsis plantlets while anionic tetra (4-sulfonatophenyl) porphyrin only delayed their growth and development. Indeed only 7% of plantlets could be rescued after CP-Zn treatment. Furthermore, non-enzymatic and enzymatic defense components involved in detoxification of ROS generated by CP-Zn under illumination were downregulated or stable with the exception of sevenfold increase in proline content. As previously demonstrated in the literature for microbial agents and in the present work for Arabidopsis, CP-Zn was efficient enough to eradicate unwanted vegetation and plant pathogens without at the same time killing plants of agronomic interest such as tomato plantlets.

Biological evaluation of a Porphyrin-SPION nanoconjugate as an antimicrobial magnetic photosensitizer

The present work describes the use of a magnetic porphyin (5-(4-carboxy-phenyl)-10,15,20-triphenyl-21H, 23H-porphyrin TPP) nanoconjugate (SPION-TPP) for destroying pathogenic bacteria followed by the recovery of the magnetic photosensitizer. SPION-TPP was tested for its activity against two different gram-positive bacterial strains (Staphylococcus aureus and Steptoccoccus mutans). It is observed that SPION-TPP at a very low concentration of 0.5 [Formula: see text]M is effective in destroying gram-positive bacteria (10[Formula: see text]–10[Formula: see text] CFU ml[Formula: see text] S. aureus with several orders reduction and few orders in S. mutans. The aim of this work is to combine photoactivity against microorganisms imparted by the photosensitizer with the possibility of recovering the nanoconstruct with magnets for disposal/reuse.

Synergistic enhancement of tolerance mechanisms in response to photoactivation of cationic tetra (N-methylpyridyl) porphyrins in tomato plantlets

Antimicrobial photodynamic treatment (APDT) is largely used in medical domain and could be envisaged as a farming practice against crop pathogens such as bacteria and fungi that generate drops in agricultural yields. Thus, as a prerequisite for this potential application, we studied the effect of water-soluble anionic (TPPS and Zn-TPPS) and cationic (TMPyP and Zn-TMPyP) porphyrins tested on tomato (Solanum lycopersicum) plantlets grown in vitro under a 16 h photoperiod. First of all, under dark conditions, none of the four porphyrins inhibited germination and induced cytotoxic effects on tomato plantlets as etiolated development was not altered. The consequences of porphyrin long-term photoactivation (14 days) were thus studied on in vitro-grown tomato plantlets at phenotypic and molecular levels. Cationic porphyrins especially Zn-TMPyP were the most efficient photosensitizers and dramatically altered growth without killing plantlets. Indeed, tomato plantlets were rescued after cationic porphyrins treatment. To gain insight, the different molecular ways implied in the plantlet tolerance to photoactivated Zn-TMPyP, lipid peroxidation, antioxidative molecules (total thiols, proline, ascorbate), and ROS detoxification enzymes were evaluated. In parallel to an increase in lipid peroxidation and hydrogen peroxide production, antioxidative molecules and enzymes (guaiacol peroxidase, catalase, and superoxide dismutase) were up-regulated in root apparatus in response to photoactivated Zn-TMPyP. This study showed that tomato plantlets could overcome the pressure triggered by photoactivated cationic porphyrin by activating antioxidative molecule and enzyme arsenal and confining Zn-TMPyP into cell wall and/or apoplasm, suggesting that APDT directed against tomato pathogens could be envisaged in the future.

Photodynamic inactivation of bacteria using novel electrogenerated porphyrin-fullerene C60 polymeric films

A porphyrin-fullerene C60 dyad (TCP-C60) substituted by carbazoyl groups was used to obtain electrogenerated polymeric films on optically transparent indium tin oxide (ITO) electrodes. This approach produced stable and reproducible polymers, holding fullerene units. The properties of this film were compared with those formed by layers of TCP/TCP-C60 and TCP/ZnTCP. Absorption spectra of the films presented the Soret and Q bands of the corresponding porphyrins. The TCP-C60 film produced a high photodecomposition of 2,2-(anthracene-9,10-diyl)bis(methylmalonate), which was used to detect singlet molecular oxygen O2((1)Δg) production in water. In addition, the TCP-C60 film induced the reduction of nitro blue tetrazolium to diformazan in the presence of NADH, indicating the formation of superoxide anion radical. Moreover, photooxidation of L-tryptophan mediated by TCP-C60 films was found in water. In biological media, photoinactivation of Staphylococcus aureus was evaluated depositing a drop with 2.5 × 10(3) cells on the films. After 30 min irradiation, no colony formation was detected using TCP-C60 or TCP/TCP-C60 films. Furthermore, photocytotoxic activity was observed in cell suspensions of S. aureus and Escherichia coli. The irradiated TCP-C60 film produced a 4 log decrease of S. aureus survival after 30 min. Also, a 4 log reduction of E. coli viability was obtained using the TCP-C60 film after 60 min irradiation. Therefore, the TCP-C60 film is an interesting and versatile photodynamic active surface to eradicate bacteria.

Photosensitisers - the progression from photodynamic therapy to anti-infective surfaces

INTRODUCTION

The application of light as a stimulus in pharmaceutical systems and the associated ability to provide precise spatiotemporal control over location, wavelength and intensity, allowing ease of external control independent of environmental conditionals, has led to its increased use. Of particular note is the use of light with photosensitisers.

AREAS COVERED

Photosensitisers are widely used in photodynamic therapy to cause a cidal effect towards cells on irradiation due to the generation of reactive oxygen species. These cidal effects have also been used to treat infectious diseases. The effects and benefits of photosensitisers in the treatment of such conditions are still being developed and further realised, with the design of novel delivery strategies. This review provides an overview of the realisation of the pharmaceutically relevant uses of photosensitisers, both in the context of current research and in terms of current clinical application, and looks to the future direction of research.

EXPERT OPINION

Substantial advances have been and are being made in the use of photosensitisers. Of particular note are their antimicrobial applications, due to absence of resistance that is so frequently associated with conventional treatments. Their potency of action and the ability to immobilise to polymeric supports is opening a wide range of possibilities with great potential for use in healthcare infection prevention strategies.

Porphyrin-based honeycomb films and their antibacterial activity

Micrometer-sized porous honeycomb-patterned thin films based on hybrid complexes formed via electrostatic interaction between Mn(III) meso-tetra(4-sulfonatophenyl) porphine chloride (an acid form, {MnTPPS}) and dimethyldioctadecylammonium bromide (DODMABr). The morphology of the microporous thin films can be well regulated by controlling the concentration of MnTPPS-DODMA complexes, DODMABr, and polystyrene (PS), respectively. The formation of the microporous thin films was largely influenced by different solvents. The well-ordered microporous films of MnTPPS-DODMA complexes exhibit a more efficient antibacterial activity under visible light than those of hybrid complexes of nanoparticles modified with DODMABr, implying that well-ordered microporous films containing porphyrin composition can improve photochemical activity and more dominance in applications in biological medicine fields.

Singlet oxygen generation in porphyrin-doped polymeric surface coating enables antimicrobial effects onStaphylococcus aureus

We propose an infection-preventive functional material exhibiting a continuous antimicrobial effect upon light irradiation, based on singlet oxygen generation.

Bacterial inactivation by a singlet oxygen bubbler: identifying factors controlling the toxicity of (1)O2 bubbles

A microphotoreactor device was developed to generate bubbles (1.4 mm diameter, 90 μL) containing singlet oxygen at levels toxic to bacteria and fungus. As singlet oxygen decays rapidly to triplet oxygen, the bubbles leave behind no waste or byproducts other than O(2). From a comparative study in deaerated, air saturated, and oxygenated solutions, it was reasoned that the singlet oxygen bubbles inactivate Escherichia coli and Aspergillus fumigatus, mainly by an oxygen gradient inside and outside of the bubble such that singlet oxygen is solvated and diffuses through the aqueous solution until it reacts with the target organism. Thus, singlet oxygen bubble toxicity was inversely proportional to the amount of dissolved oxygen in solution. In a second mechanism, singlet oxygen interacts directly with E. coli that accumulate at the gas-liquid interface although this mechanism operates at a rate approximately 10 times slower. Due to encapsulation in the gaseous core of the bubble and a 0.98 ms lifetime, the bubbles can traverse relatively long 0.39 mm distances carrying (1)O(2) far into the solution; by comparison the diffusion distance of (1)O(2) fully solvated in H(2)O is much shorter (~150 nm). Bubbles that reached the outer air-water interface contained no (1)O(2). The mechanism by which (1)O(2) deactivated organisms was explored through the addition of detergent molecules and Ca(2+) ions. Results indicate that the preferential accumulation of E. coli at the air-water interface of the bubble leads to enhanced toxicity of bubbles containing (1)O(2). The singlet oxygen device offers intriguing possibilities for creating new types of disinfection strategies based on photodynamic ((1)O(2)) bubble carriers.

Vilsmeier-Haack formylation of Cu(II) and Ni(II) porphyrin complexes under microwaves irradiation

Microwave irradiation is a powerful tool in organic synthesis allowing for instance, to reduce reaction times and to obtain the desired products in better yields. Contrary to what is reported in literature, the first Vilsmeier-Haack formylation of Ni(II) and Cu(II) complexes of meso-tetraarylporphyrins by using microwave irradiation is described here. Different solvents, irradiation powers and reaction times were studied using the Ni(II) and Cu(II) complexes of 5,10,15,20-tetraphenylporphyrin and the best found conditions were extended to a series of other meso-substituted tetraarylporphyrins. The products, namely the new ones were isolated in good to excellent yields and with a significant reduction on the reaction times. Scaled-up studies have shown that the efficiency of the process is not affected by increasing the amount of porphyrin.

Photodynamic therapy based on 5-aminolevulinic acid and its use as an antimicrobial agent

Exogenous 5-aminolevulinic acid (ALA) is taken up directly by bacteria, yeasts, fungi, and some parasites, which then induces the accumulation of protoporphyrin IX (PPIX). Subsequent light irradiation of PPIX leads to the inactivation of these organisms via photodamage to their cellular structures. ALA uptake and light irradiation of PPIX produced by host cells leads to the inactivation of other parasites, along with some viruses, via the induction of an immune response. ALA-mediated PPIX production by host cells and light irradiation result in the inactivation of other viruses via either the induction of a host cell response or direct photodynamic attack on viral particles. This ALA-mediated production of light-activated PPIX has been extensively used as a form of photodynamic therapy (PDT) and has shown varying levels of efficacy in treating conditions that are associated with microbial infection, ranging from acne and verrucae to leishmaniasis and onychomycosis. However, for the treatment of some of these conditions by ALA-based PDT, the role of an antimicrobial effect has been disputed and in general, the mechanisms by which the technique inactivates microbes are not well understood. In this study, we review current understanding of the antimicrobial mechanisms used by ALA-based PDT and its role in the treatment of microbial infections along with its potential medical and nonmedical applications.

Fluorescent polyurethane nanofabrics: a source of singlet oxygen and oxygen sensing

Polyurethane (PUR) nanofabrics based on nanofibers of average diameters in the range of 250-110 nm with different meso-tetraphenylporphyrin (TPP) loading (0.01-5 wt %) were prepared by an electrospinning process. The oxygen quenching of excited states and singlet oxygen-sensitized delayed fluorescence (SODF) of TPP were studied at different oxygen pressures. We found that TPP in PUR matrix is present in monomeric state, and it is easily accessed by oxygen. Analysis of the kinetics of the TPP triplet, singlet oxygen, and SODF indicates that repopulation of TPP fluorescent state includes reaction of singlet oxygen with TPP triplets. The integrated SODF achieved more than 20% of the prompt fluorescence for nanofabric loaded with 5 wt % TPP. The dependence of SODF intensity on the TPP concentration in nanofibers is nearly quadratic.

Photodynamic treatment: a new efficient alternative for surface sanitation

A novel and promising technology-photodynamic treatment (PDT), aimed for surface cleaning and sanitation in food industry-is presented. It is based on the treatment of surfaces with nontoxic dyes (photosensitizers), followed by illumination of the surface with regular white light. The method is currently used in the medical field and was proved to have wide specificity against a variety of bacterial and viral pathogens as well as against yeasts and protozoa. An additional advantage of this approach is that development of resistance of microorganisms to PDT was shown to be unlikely. The theoretical basis of light-induced antimicrobial treatment is described, followed by examples of its application for the cleaning and disinfection of surfaces. All available information supports the idea that PDT could offer a very efficient and cost-effective way to combat microbial contamination of foods. The advantages and pitfalls of the technique are discussed. Directions of future research needed for bringing the technology to commercial reality are identified.