Water plasmas for the revalorisation of heavy oils and cokes from petroleum refining

Applications of Plasma-Liquid Systems: A Review

Plasma-liquid systems have attracted increasing attention in recent years, owing to their high potential in material processing and nanoscience, environmental remediation, sterilization, biomedicine, and food applications. Due to the multidisciplinary character of this scientific field and due to its broad range of established and promising applications, an updated overview is required, addressing the various applications of plasma-liquid systems till now. In the present review, after a brief historical introduction on this important research field, the authors aimed to bring together a wide range of applications of plasma-liquid systems, including nanomaterial processing, water analytical chemistry, water purification, plasma sterilization, plasma medicine, food preservation and agricultural processing, power transformers for high voltage switching, and polymer solution treatment. Although the general understanding of plasma-liquid interactions and their applications has grown significantly in recent decades, it is aimed here to give an updated overview on the possible applications of plasma-liquid systems. This review can be used as a guide for researchers from different fields to gain insight in the history and state-of-the-art of plasma-liquid interactions and to obtain an overview on the acquired knowledge in this field up to now.

High-efficiency removal of NOx using a combined adsorption-discharge plasma catalytic process

A combined adsorption-discharge plasma catalytic process was used for the removal of NO(x) using zeolites as catalysts without external heating. It was found that the types of plasma carrier gases exert great effect on the conversion of adsorbed NO(x). The conversion of adsorbed NO(x) is much lower in N(2) plasma than in Ar plasma, which is attributed to the reverse reaction, NO(x) formation reaction. The momentary increase of oxygen species derived from the decomposition of adsorbed NO(x) is considered to be the main cause as their collisions with nitrogen species can generate NO(x) again. Thus, solid carbon was added to the catalyst to act as a scavenger for active oxygen species to improve the conversion of adsorbed NO(x) in N(2) plasma. A NO(x) removal rate of 97.8% was obtained on 8.5wt.% carbon mixed H-ZSM-5 at an energy efficiency of 0.758 mmol NO(x)/W·h.

Evaluation of different dielectric barrier discharge plasma configurations as an alternative technology for green C1 chemistry in the carbon dioxide reforming of methane and the direct decomposition of methanol

Carbon dioxide reforming of methane and direct decomposition of methanol have been investigated using dielectric barrier discharges (DBD) at atmospheric pressure and reduced working temperatures. Two different plasma reactor configurations are compared and special attention is paid to the influence of the surface roughness of the electrodes on the conversion yields in the first plasma device. The influence of different filling gap dielectric materials (i.e., Al(2)O(3) or BaTiO(3)) in the second packed configuration has been also evaluated. Depending on the experimental conditions of applied voltage, residence time of reactants, feed ratios, or reactor configuration, different conversion yields are achieved ranging from 20 to 80% in the case of methane and 7-45% for the carbon dioxide. The direct decomposition of methanol reaches 60-100% under similar experimental conditions. Interestingly, the selectivity toward the production of hydrogen and carbon monoxide is kept almost constant under all the experimental conditions, and the formation of longer hydrocarbon chains or coke as a byproduct is not detected. The maximum efficiency yields are observed for the packed-bed reactor configuration containing alumina for both reaction processes (approximately 1 mol H(2) per kilowatt hour for dry reforming of methane and approximately 4.5 mol H(2) per kilowatt hour for direct decomposition of methanol).