Hydroxo-bridged Cubane-type tetrairon(II) clusters supported by sterically-hindered carboxylate ligands

A tetra Co(II/III) complex with an open cubane Co4O4 core and square-pyramidal Co(II) and octahedral Co(III) centres: bifunctional electrocatalytic activity towards water splitting at neutral pH

The reaction of 2,6-diformyl-4-methylphenol, 4-methoxybenzoylhydrazine and Co(OAc)₂·4H₂O in 1 : 2 : 2 mole ratio in methanol under aerobic conditions produced in 61% yield a tetranuclear complex having the molecular formula [Co^IICo^III(μ-OAc)(μ₃-OH)(μ-L)]₂ where OAc^- and L^3- represent acetate and N',N''-(5-methyl-2-oxido-1,3-phenylene)bis(methan-1-yl-1-ylidene)bis(4-methoxybenzoylhydrazonate), respectively. The elemental analysis and the mass spectrometric data confirmed the molecular formula of the complex. It is electrically non-conducting and paramagnetic. The complex crystallized as acetonitrile solvate. The X-ray structure shows that each Co(II) centre has a distorted square-pyramidal NO₄ coordination sphere, while each Co(III) centre is in a distorted octahedral NO₅ environment. The four metal atoms and the four bridging O-atoms form an open cubane type Co₄O₄ motif. In the crystal lattice, self-assembly of the solvated complex via intermolecular O-H⋯O interaction leads to a two-dimensional network structure. The infrared and electronic spectroscopic features of the complex are consistent with its molecular structure. Cryomagnetic measurements together with theoretical calculations suggest the presence of easy-axis anisotropy for the square-pyramidal Co(II) centres. The complex is redox-active and displays metal centred oxidation and reduction responses on the anodic and cathodic sides, respectively, of the Ag/AgCl electrode. Bifunctional heterogeneous electrocatalytic activity of the complex towards O₂ and H₂ evolution reactions (OER and HER) in neutral aqueous medium has been explored in detail.

A discrete {Co4(μ3-OH)4}(4+) cluster with an oxygen-rich coordination environment as a catalyst for the epoxidation of various olefins

Using the sterically hindered terphenyl-based carboxylate, the tetrameric Co(ii) complex [Co4(μ3-OH)4(μ-O2CAr(4F-Ph))2(μ-OTf)2(Py)4] () with an asymmetric cubane-type core has been synthesized and fully characterized by X-ray diffraction, UV-vis spectroscopy, and electron paramagnetic resonance spectroscopy. Interestingly, the cubane-type cobalt cluster with 3-chloroperoxybenzoic acid as the oxidant was found to be very effective in the epoxidation of a variety of olefins, including terminal olefins which are more challenging targeting substrates. Moreover, this catalytic system showed a fast reaction rate and high epoxide yields under mild conditions. Based on product analysis and Hammett studies, the use of peroxyphenylacetic acid as a mechanistic probe, H2(18)O-exchange experiments, and EPR studies, it has been proposed that multiple reactive cobalt-oxo species Co(V)[double bond, length as m-dash]O and Co(IV)[double bond, length as m-dash]O were involved in the olefin epoxidation.

Solutions of complex copper salts in low-transition-temperature mixture (LTTM)

The structure and properties of diethanolamine complexes of copper(ii) triflates dissolved in an excess of diethanolamine (DH2) were studied. The copper containing substance was found to be a solution of copper(ii) complex salt [Cu(2+)DH2(DH(-))]OTf(-) in LTTM composition [(DH2)4H(+)](OTf(-)), where LTTM = low-transition-temperature mixture, OTf(-) = triflate anion. According to the EXAFS data, the coordination number of copper(ii) atoms in solution does not exceed four. Addition of even negligible amounts of acid significantly changes DH2 volatility and decomposition conditions.

Evolution of strategies to prepare synthetic mimics of carboxylate-bridged diiron protein active sites

We present a comprehensive review of research conducted in our laboratory in pursuit of the long-term goal of reproducing the structures and reactivity of carboxylate-bridged diiron centers used in biology to activate dioxygen for the conversion of hydrocarbons to alcohols and related products. This article describes the evolution of strategies devised to achieve these goals and illustrates the challenges in getting there. Particular emphasis is placed on controlling the geometry and coordination environment of the diiron core, preventing formation of polynuclear iron clusters, maintaining the structural integrity of model complexes during reactions with dioxygen, and tuning the ligand framework to stabilize desired oxygenated diiron species. Studies of the various model systems have improved our understanding of the electronic and physical characteristics of carboxylate-bridged diiron units and their reactivity toward molecular oxygen and organic moieties. The principles and lessons that have emerged from these investigations will guide future efforts to develop more sophisticated diiron protein model complexes.

A mixed-valence octanuclear iron-oxo pyrazolate: assessment of electronic delocalization by structural and spectroscopic analysis

A formally Fe(III)(7)Fe(II) complex, containing an inner Fe(4)O(4)-cubane and four peripheral Fe centers, is derived from the one-electron reduction of its Fe(III)(8) precursor. Spectroscopic analysis of the former reveals that the redox activity of this Fe(8) system is confined within its cubane core. The resulting (Fe(4)O(4))(3+)-cubane, which is valence-delocalized in the NMR, Mössbauer, and IR spectroscopy time scales but valence-trapped in the X-ray photoelectron spectroscopy (XPS) time scale, is better described as a Robin-Day class-II system by the analysis of its near-infrared (NIR) intervalence charge transfer (IVCT) band profile.

Synthesis, characterization, and study of octanuclear iron-oxo clusters containing a redox-active Fe4O4-cubane core

A one-pot synthetic procedure yields the octanuclear Fe(III) complexes Fe(8)(micro(4-)O)(4)(micro-pz(*))(12)X(40, where X = Cl and pz(*) = pyrazolate anion (pz = C(3)H(3)N(2)-) (1), 4-Cl-pz (2), and 4-Me-pz (3) or X = Br and pz(*) = pz (4). The crystal structures of complexes 1-4, determined by X-ray diffraction, show an Fe(4)O(4)-cubane core encapsulated in a shell composed of four interwoven Fe(micro-pz(*))(3)X units. Complexes 1-4 have been characterized by 1H NMR, infrared, and Raman spectroscopies. Mössbauer spectroscopic analysis distinguishes the cubane and outer Fe(III) centers by their different isomer shift and quadrupole splitting values. Electrochemical analyses by cyclic voltammetry show four consecutive, closely spaced, reversible reduction processes for each of the four complexes. Magnetic susceptibility studies, corroborated by density functional theory calculations, reveal weak antiferromagnetic coupling among the four cubane Fe centers and strong antiferromagnetic coupling between cubane and outer Fe atoms of 1. The structural similarity between the antiferromagnetic Fe(8)(micro(4-)O)(4) core of 1-4 and the antiferromagnetic units contained in the minerals ferrihydrite and maghemite is demonstrated by X-ray and Mössbauer data.

Synthesis, characterization, and preliminary oxygenation studies of benzyl- and ethyl-substituted pyridine ligands of carboxylate-rich diiron(II) complexes

In this study benzyl and ethyl groups were appended to pyridine and aniline ancillary ligands in diiron(II) complexes of the type [Fe(2)(mu-O(2)CAr(R))(2)(O(2)CAr(R))(2)(L)(2)], where (-)O(2)CAr(R) is a sterically hindered terphenyl carboxylate, 2,6-di(p-tolyl)- or 2,6-di(p-fluorophenyl)benzoate (R = Tol or 4-FPh, respectively). These crystallographically characterized compounds were prepared as analogues of the diiron(II) center in the hydroxylase component of soluble methane monooxygenase (MMOH). The use of 2-benzylpyridine (2-Bnpy) yielded doubly bridged [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(2-Bnpy)(2)] (1) and [Fe(2)(mu-O(2)CAr(4)(-)(FPh))(2)(O(2)CAr(4)(-)(FPh))(2)(2-Bnpy)(2)] (4), whereas tetra-bridged [Fe(2)(mu-O(2)CAr(Tol))(4)(4-Bnpy)(2)] (3) resulted when 4-benzylpyridine (4-Bnpy) was employed. Similarly, 2-(4-chlorobenzyl)pyridine (2-(4-ClBn)py) and 2-benzylaniline (2-Bnan) were employed as N-donor ligands to prepare [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(2-(4-ClBn)py)(2)] (2) and [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(2-Bnan)(2)] (5). The placement of the substituent on the pyridine ring had no effect on the geometry of the diiron(II) compounds isolated when 2-, 3-, or 4-ethylpyridine (2-, 3-, or 4-Etpy) was introduced as the ancillary nitrogen ligand. The isolated [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(2-Etpy)] (6), [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(3-Etpy)] (7), [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(4-Etpy)] (8), and [Fe(2)(mu-O(2)CAr(4)(-FPh))(2)(O(2)CAr(4)(-)(FPh))(2)(2-Etpy)(2)] (9) complexes all contain doubly bridged metal centers. The oxygenation of compounds 1-9 was studied by GC-MS and NMR analysis of the organic fragments following decomposition of the product complexes. Hydrocarbon fragment oxidation occurred for compounds in which the substrate moiety was in close proximity to the diiron center. The extent of oxidation depended upon the exact makeup of the ligand set.

Dioxygen-initiated oxidation of heteroatomic substrates incorporated into ancillary pyridine ligands of carboxylate-rich diiron(II) complexes

Progress toward the development of functional models of the carboxylate-bridged diiron active site in soluble methane monooxygenase is described in which potential substrates are introduced as substituents on bound pyridine ligands. Pyridine ligands incorporating a thiol, sulfide, sulfoxide, or phosphine moiety were allowed to react with the preassembled diiron(II) complex [Fe(2)(mu-O(2)CAr(R))(2)(O(2)CAr(R))(2)(THF)(2)], where (-)O(2)CAr(R) is a sterically hindered 2,6-di(p-tolyl)- or 2,6-di(p-fluorophenyl)benzoate (R = Tol or 4-FPh). The resulting diiron(II) complexes were characterized crystallographically. Triply and doubly bridged compounds [Fe(2)(mu-O(2)CAr(Tol))(3)(O(2)CAr(Tol))(2-MeSpy)] (4) and [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(2-MeS(O)py)(2)] (5) resulted when 2-methylthiopyridine (2-MeSpy) and 2-pyridylmethylsulfoxide (2-MeS(O)py), respectively, were employed. Another triply bridged diiron(II) complex, [Fe(2)(mu-O(2)CAr(4)(-)(FPh))(3)-(O(2)CAr(4)(-)(FPh))(2-Ph(2)Ppy)] (3), was obtained containing 2-diphenylphosphinopyridine (2-Ph(2)Ppy). The use of 2-mercaptopyridine (2-HSpy) produced the mononuclear complex [Fe(O(2)CAr(Tol))(2)(2-HSpy)(2)] (6a). Together with that of previously reported [Fe(2)(mu-O(2)CAr(Tol))(3)(O(2)CAr(Tol))(2-PhSpy)] (2) and [Fe(2)(mu-O(2)CAr(Tol))(3)(O(2)CAr(Tol))(2-Ph(2)Ppy)] (1), the dioxygen reactivity of these iron(II) complexes was investigated. A dioxygen-dependent intermediate (6b) formed upon exposure of 6a to O(2), the electronic structure of which was probed by various spectroscopic methods. Exposure of 4 and 5 to dioxygen revealed both sulfide and sulfoxide oxidation. Oxidation of 3 in CH(2)Cl(2) yields [Fe(2)(mu-OH)(2)(mu-O(2)CAr(4)(-)(FPh))(O(2)CAr(4)(-FPh))(3)(OH(2))(2-Ph(2)P(O)py)] (8), which contains the biologically relevant {Fe(2)(mu-OH)(2)(mu-O(2)CR)}(3+) core. This reaction is sensitive to the choice of carboxylate ligands, however, since the p-tolyl analogue 1 yielded a hexanuclear species, 7, upon oxidation.

Crystal structure and magnetic properties of a pseudo-cubic close-packed array of oxalate linked {FeII6(μ3-OH)6}6+clusters

The ionic hexanuclear cluster aggregate [FeII6(mu3-OH)6]6+ has been synthesised using hydrothermal conditions starting from ferrous oxalate in the presence of barium and bromide or iodide ions. A single crystal X-ray structure on the compound Ba4[FeII6(mu3-OH)6(C2O4)6]Br2.6H2O shows that the [FeII6(mu3-OH)6]6+ units are held together by bridging oxalates in a pseudo-cubic close-packed array. The barium ions in conjunction with oxalate groups provide a barrel-shaped cage between the FeII6 aggregates containing the bromide counterions and lattice waters and corresponding to an 'octahedral hole' in the pseudo-cubic close-packed structure. A magnetic susceptibility study shows that the FeII centres are antiferromagnetically coupled. Below 10 K the system displays a long range antiferromagnetic ordering mediated by the oxalate bridges and a molecular-based description of the magnetism is no longer valid.

Synthetic analogue of the [Fe(2)(mu-OH)(2)(mu-O(2)CR)](3+) core of soluble methane monooxygenase hydroxylase via synthesis and dioxygen reactivity of carboxylate-bridged diiron(II) complexes

We describe the synthesis and dioxygen reactivity of diiron(II) tetracarboxylate complexes [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(N,N-Me(2)en)(2)] (2) and [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(N,N-Bn(2)en)(2)] (6), where Ar(Tol)CO(2)(-) = 2,6-di(p-tolyl)benzoate. These complexes were prepared as models for the diiron(II) center in the hydroxylase component of soluble methane monooxygenase (MMOH). Compound 6 reacts with dioxygen to afford PhCHO in approximately 60(5)% yield, following oxidative N-dealkylation of the pendant benzyl group on the diamine ligand. The diiron(III) complex [Fe(2)(mu-OH)(2)(mu-O(2)CAr(Tol))(O(2)CAr(Tol))(3)(N-Bnen)(N,N-Bn(2)en)] (8) was isolated from the reaction mixture. The 4.2 K Mössbauer spectrum of 8 displays a single quadrupole doublet with parameters delta = 0.48(2) mm s(-1) and Delta E(Q) = 0.61(2) mm s(-1). The [Fe(2)(mu-OH)(2)(mu-O(2)CR)](3+) core structure in 8 matches that of the fully oxidized form of MMOH. The conversion of 6 to 8 closely parallels the chemistry of MMOH in which an O(2)-derived oxygen atom is inserted into the C-H bond of methane. Several reaction pathways are considered to account for this novel chemical transformation, and these are compared with mechanistic frameworks previously developed for related cytochrome P450 and copper(I) dioxygen chemistry.