Thermochemistry of Lewis Adducts of BH3 and Nucleophilic Substitution of Triethylamine on NH3BH3 in Tetrahydrofuran

A Theoretical Perspective on the Photochemistry of Boron-Nitrogen Lewis Adducts

Boron-Nitrogen (B-N) Lewis adducts form a versatile family of compounds with numerous applications in functional molecules. Despite the growing interest in this family of compounds for optoelectronic applications, little is currently known about their photophysics and photochemistry. Even the electronic absorption spectrum of ammonia borane, the textbook example of a B-N Lewis adduct, is unavailable. Given the versatility of the light-induced processes exhibited by these molecules, we propose in this work a detailed theoretical study of the photochemistry and photophysics of simple B-N Lewis adducts. We used advanced techniques in computational photochemistry to identify and characterize the possible photochemical pathways followed by ammonia borane and extended this knowledge to the substituted B-N Lewis adducts pyridine-borane and pyridine-boric acid. The photochemistry observed for this series of molecules allows us to extract qualitative rules to rationalize the light-induced behavior of more complex B-N-containing molecules.

Dehydropolymerization of Amine-Boranes using Bis(imino)pyridine Rhodium Pre-Catalysis: σ-Amine-Borane Complexes, Nanoparticles, and Low Residual-Metal BN-Polymers that can be Chemically Repurposed

The sigma amine-borane complexes [Rh(L1)(η2 :η2 -H3 B⋅NRH2 )][OTf] (L1=2,6-bis-[1-(2,6-diisopropylphenylimino)ethyl]pyridine, R=Me, Et, n Pr) are described, alongside [Rh(L1)(NMeH2 )][OTf]. Using R=Me as a pre-catalyst (1 mol %) the dehydropolymerization of H3 B ⋅ NMeH2 gives [H2 BNMeH]n selectively. Added NMeH2 , or the direct use of [Rh(L1)(NMeH2 )][OTf], is required for initiation of catalysis, which is suggested to operate through the formation of a neutral hydride complex, Rh(L1)H. The formation of small (1-5 nm) nanoparticles is observed at the end of catalysis, but studies are ambiguous as to whether the catalysis is solely nanoparticle promoted or if there is a molecular homogeneous component. [Rh(L1)(NMeH2 )][OTf] is shown to operate at 0.025 mol % loadings on a 2 g scale of H3 B ⋅ NMeH2 to give polyaminoborane [H2 BNMeH]n [Mn =30,900 g/mol, Ð=1.8] that can be purified to a low residual [Rh] (6 μg/g). Addition of Na[N(SiMe3 )2 ] to [H2 BNMeH]n results in selective depolymerization to form the eee-isomer of N,N,N-trimethylcyclotriborazane [H2 BNMeH]3 : the chemical repurposing of a main-group polymer.

Ir-Catalyzed B(3)-Amination of o-Carboranes with Amines via Acceptorless Dehydrogenative BH/NH Cross-Coupling

An efficient and convenient strategy for Ir-catalyzed selective B(3)-amination of o-carboranes with amines via acceptorless BH/NH dehydrocoupling was developed, affording a series of B(3)-aminated-o-carboranes in moderate to high isolated yields with H2 gas as a sole by-product. Such an oxidant-free system endues the protocol sustainability, atom-economy and environmental friendliness. A reaction mechanism via an Ir(I)-Ir(III)-Ir(I) catalytic cycle involving oxidative addition, dehydrogenation and reductive elimination was proposed.

Dehydropolymerization of H3B·NMeH2 Mediated by Cationic Iridium(III) Precatalysts Bearing κ3-iPr-PNRP Pincer Ligands (R = H, Me): An Unexpected Inner-Sphere Mechanism

The dehydropolymerization of H₃B·NMeH₂ to form N-methylpolyaminoborane using neutral and cationic catalysts based on the {Ir(ⁱPr-PN^HP)} fragment [ⁱPr-PN^HP = κ³-(CH₂CH₂PⁱPr₂)₂NH] is reported. Neutral Ir(ⁱPr-PN^HP)H₃ or Ir(ⁱPr-PN^HP)H₂Cl precatalysts show no, or poor and unselective, activity respectively at 298 K in 1,2-F₂C₆H₄ solution. In contrast, addition of [NMeH₃][BAr^F₄] (Ar^F = 3,5-(CF₃)₂C₆H₃) to Ir(ⁱPr-PN^HP)H₃ immediately starts catalysis, suggesting that a cationic catalytic manifold operates. Consistent with this, independently synthesized cationic precatalysts are active (tested between 0.5 and 2.0 mol % loading) producing poly(N-methylaminoborane) with M_n ∼ 40,000 g/mol, Đ ∼1.5, i.e., dihydrogen/dihydride, [Ir(ⁱPr-PN^HP)(H)₂(H₂)][BAr^F₄]; σ-amine-borane [Ir(ⁱPr-PN^HP)(H)₂(H₃B·NMe₃)][BAr^F₄]; and [Ir(ⁱPr-PN^HP)(H)₂(NMeH₂)][BAr^F₄]. Density functional theory (DFT) calculations probe hydride exchange processes in two of these complexes and also show that the barrier to amine-borane dehydrogenation is lower (22.5 kcal/mol) for the cationic system compared with the neutral system (24.3 kcal/mol). The calculations show that the dehydrogenation proceeds via an inner-sphere process without metal–ligand cooperativity, and this is supported experimentally by N–Me substituted [Ir(ⁱPr-PN^MeP)(H)₂(H₃B·NMe₃)][BAr^F₄] being an active catalyst. Key to the lower barrier calculated for the cationic system is the outer-sphere coordination of an additional H₃B·NMeH₂ with the N–H group of the ligand. Experimentally, kinetic studies indicate a complex reaction manifold that shows pronounced deceleratory temporal profiles. As supported by speciation and DFT studies, a key observation is that deprotonation of [Ir(ⁱPr-N^HP)(H)₂(H₂)][BAr^F₄], formed upon amine-borane dehydrogenation, by the slow in situ formation of NMeH₂ (via B–N bond cleavage), results in the formation of essentially inactive Ir(ⁱPr-PN^HP)H₃, with a coproduct of [NMeH₃]⁺/[H₂B(NMeH₂)₂]⁺. While reprotonation of Ir(ⁱPr-PN^HP)H₃ results in a return to the cationic cycle, it is proposed, supported by doping experiments, that reprotonation is attenuated by entrainment of the [NMeH₃]⁺/[H₂B(NMeH₂)₂]⁺/catalyst in insoluble polyaminoborane. The role of [NMeH₃]⁺/[H₂B(NMeH₂)]⁺ as chain control agents is also noted.

Dual Reactivity of a Geometrically Constrained Phosphenium Cation

A geometrically constrained phosphenium cation in bis(pyrrolyl)pyridine based NNN pincer type ligand (1⁺) was synthesized, isolated and its preliminary reactivity was studied with small molecules. 1⁺ reacts with MeOH and Et₂NH, activating the O−H and N−H bonds via a P‐center/ligand assisted path. The reaction of 1⁺ with one equiv. of H₃NBH₃ leads to its dehydrogenation producing 5. Interestingly, reaction of 1⁺ with an excess H₃NBH₃ leads to phosphinidene (P^I) species coordinating to two BH₃ molecules (6). In contrast, [1⁺][OTf] reacts with Et₃SiH by hydride abstraction yielding 1‐H and Et₃SiOTf, while [1⁺][B(C₆F₅)₄] reacts with Et₃SiH via an oxidative addition type reaction of Si−H bond to P‐center, affording a new P^V compound (8). However, 8 is not stable over time and degrades to a complex mixture of compounds in matter of minutes. Despite this, the ability of [1⁺][B(C₆F₅)₄] to activate Si−H bond could still be tested in catalytic hydrosilylation of benzaldehyde, where 1⁺ closely mimics transition metal behaviour.

Theoretical insights on boron reducing agent for the reduction of carbonyl compounds

In this perspective, we present computational progress in the reduction of carbonyl compounds using boron reducing agents, such as L·BH₃, HBcat, HBpin, and 9-BBN. For the catalytic reduction reactions, establishing a catalytic mechanism will provide an important theoretical basis for the improvement of a more efficient combination of reducing agents and catalysts. Current computational studies reveal that the mechanisms of reactions are different due to the various combinations of electrophilic boron reducing agents and catalysts (transition-metal catalyst, main group metal catalysts, and metal-free frustrated Lewis pair). We discuss the role of boron reducing agents on the efficiency of reactions and believe that possible Lewis acid-base interaction between B^δ+, M^δ+ and O^δ-, H^δ- existing in boron reducing agent, unsaturated substances, and catalyst should be considered fully. A tentative outlook on future opportunities of this research field is proposed.

Ammonia-borane as a Catalyst for the Direct Amidation of Carboxylic Acids

Ammonia-borane serves as an efficient substoichiometric (10%) precatalyst for the direct amidation of both aromatic and aliphatic carboxylic acids. In situ generation of amine-boranes precedes the amidation and, unlike the amidation with stoichiometric amine-boranes, this process is facile with 1 equiv of the acid. This methodology has high functional group tolerance and chromatography-free purification but is not amenable for esterification. The latter feature has been exploited to prepare hydroxyl- and thiol-containing amides.

Reactivity and mechanisms of hydridic hydrogen of B–H in ammonia borane towards acetic acids: the ammonia B-monoacyloxy boranes

B-monoacyloxy boranes are first obtained by moderate reactions of ammonia borane with acetic acids.

Influence of Multisite Metal-Ligand Cooperativity on the Redox Activity of Noninnocent N2S2 Ligands

Metal-ligand cooperativity (MLC) relies on chemically reactive ligands to assist metals with small-molecule binding and activation, and it has facilitated unprecedented examples of catalysis with metal complexes. Despite growing interest in combining ligand-centered chemical and redox reactions for chemical transformations, there are few studies demonstrating how chemically engaging redox active ligands in MLC affects their electrochemical properties when bound to metals. Here we report stepwise changes in the redox activity of model Ru complexes as zero, one, and two BH₃ molecules undergo MLC binding with a triaryl noninnocent N₂S₂ ligand derived from o-phenylenediamine (L1). A similar series of Ru complexes with a diaryl N₂S₂ ligand with ethylene substituted in place of phenylene (L2) is also described to evaluate the influence of the o-phenylenediamine subunit on redox activity and MLC. Cyclic voltammetry (CV) studies and density functional theory (DFT) calculations show that MLC attenuates ligand-centered redox activity in both series of complexes, but electron transfer is still achieved when only one of the two redox-active sites on the ligands is chemically engaged. The results demonstrate how incorporating more than one multifunctional reactive site could be an effective strategy for maintaining redox noninnocence in ligands that are also chemically reactive and competent for MLC.

Boron-Nitrogen Double Tweezers Comprising Arylboronic Esters and Diamines: Self-Assembly in Solution and Adaptability as Hosts for Aromatic Guests in the Solid State

The thermodynamic stability of 1 : 1 and 2 : 1 boron-nitrogen (B←N) adducts formed between aromatic boronic esters with mono- and diamines was studied in solution by NMR and UV-vis spectroscopy with association energies (ΔG°) ranging from -11 to -28 kJ mol^-1 . The effect of different substituents in the boronic ester, the nature of the diamine linker, and the effect of the solvent was explored. Stable 2 : 1 B←N adducts with diamines such as 1,3-diaminopropane were produced in solutions of hydrogen-bonding acceptor solvents (acetonitrile and ethyl acetate), which can be isolated in the solid state as crystalline solvates, whereas the use of noncoordinating solvents such as 1,2-dichloroethane afforded mainly 1 : 1 B←N adducts. In suitable combinations, aromatic bis-pyridyl diamines produced stable 2 : 1 B←N adducts that were isolated either as solvent-free solids, solvates, or cocrystals. In these crystalline forms, double-tweezer hosts were observed with an exceptional syn/anti conformational guest-adaptability driven by simultaneous donor-acceptor and C-H⋅⋅⋅π interactions in the tweezer cavities, resembling preorganized covalent tweezer hosts. Interestingly, cocrystals with electron-rich guests such as tetrathiafulvalene and pyrene showed non-centrosymmetric crystal lattices with infinite π-stacked donor-acceptor columns.

Synthesis, structural properties and reactivity of ruthenocene-based pincer Pd(ii) tetrahydroborate

Non-covalent interactions determine the structure, crystal packing and reactivity of isolated ruthenocene-based pincer Pd(ii) complexes. Bifurcate dihydrogen-bonded complexes are active intermediates of tetrahydroborate alcoholysis.

Crystal Structure of Burgess Inner Salts and their Hydrolyzed Ammonium Sulfaminates

The solid-state structures of the Burgess reagent, and its analogous ethyl ester reveal structures indicative of triethylamine solvated sulfonyl imides rather than the more commonly depicted triethylammonium sulfonyl amidate. The existence of a reversibly formed hydrate of Burgess reagent is not supported by present studies, but rather a hydrosylate that does not revert to the Burgess reagent with gentle warming under vacuum was isolated and characterised. Structures of the hydrosylates from both the methyl- and ethyl-amidate esters were determined from X-ray crystallographic analysis and are reported. The crystal structures of the Burgess inner salts exhibit geometries at the sulfur atoms that are intermediate between a planar O2S=NCO2R unit and tetrahedral 4-coordinate sulfur centres that would be expected from a strong single (dative) bond between the triethylamine nitrogen and sulfur. The hydrolysed ammonium sulfaminates are water soluble intermolecular salts composed of triethylammonium ions, Et3NH+, and N-(alkoxycarbonyl)sulfaminate, O(−)SO2NHCO2R {R=CH3 or C2H5}.

Dihydrogen bond intermediated alcoholysis of dimethylamine-borane in nonaqueous media

Dimethylamine-borane (DMAB) acid/base properties, its dihydrogen-bonded (DHB) complexes and proton transfer reaction in nonaqueous media were investigated both experimentally (IR, UV/vis, NMR, and X-ray) and theoretically (DFT, NBO, QTAIM, and NCI). The effects of DMAB concentration, solvents polarity and temperature on the degree of DMAB self-association are shown and the enthalpy of association is determined experimentally for the first time (-ΔH°assoc = 1.5-2.3 kcal/mol). The first case of "improper" (blue-shifting) NH···F hydrogen bonds was observed in fluorobenzene and perfluorobenzene solutions. It was shown that hydrogen-bonded complexes are the intermediates of proton transfer from alcohols and phenols to DMAB. The reaction mechanism was examined computationally taking into account the coordinating properties of the reaction media. The values of the rate constants of proton transfer from HFIP to DMAB in acetone were determined experimentally [(7.9 ± 0.1) × 10(-4) to (1.6 ± 0.1) × 10(-3) mol(-1)·s(-1)] at 270-310 K. Computed activation barrier of this reaction ΔG(‡theor)298 K(acetone) = 23.8 kcal/mol is in good agreement with the experimental value of the activation free energy ΔG(‡exp)270 K = 21.1 kcal/mol.

Regeneration of ammonia borane from spent fuel materials

A shift to the hydrogen economy requires the development of an effective hydrogen fuel carrier with high volumetric and gravimetric storage capacity. Ammonia borane (AB) has emerged as a leading candidate due to its light weight and multiple protic (N-H) and hydridic (B-H) hydrogens. As a consequence, much work has been directed towards fine tuning the release of H2 from AB, in addition to its regeneration from the dehydrogenated "spent fuel" materials. This review summarizes the development of these regeneration methodologies.

A thermodynamic and kinetic study of the heterolytic activation of hydrogen by frustrated borane-amine Lewis pairs

Calorimetry is used to measure the reaction enthalpies of hydrogen (H(2)) activation by 2,6-lutidine (Lut), 2,2,6,6-tetramethylpiperidine (TMP), N-methyl-2,2,6,6-tetramethylpiperidine (MeTMP), and tri-tert-butylphosphine (TBP) with tris(pentafluorophenyl)borane (BCF). At 6.6 bar H(2) the conversion of the Lewis acid Lewis base pair to the corresponding ionic pair in bromobenzene at 294 K was quantitative in under 60 min. Integration of the heat release from the reaction of the Frustrated Lewis Pair (FLP) with H(2) as a function of time yields a relative rate of hydrogenation in addition to the enthalpy of hydrogenation. The half-lives of hydrogenation range from 230 s with TMP, ΔH(H2) = -31.5(0.2) kcal mol(-1), to 1400 s with Lut, ΔH(H2) = -23.4(0.4) kcal mol(-1). The (11)B nuclear magnetic resonance (NMR) spectrum of B(C(6)F(5))(3) in bromobenzene exhibits three distinct traits depending on the sterics of the Lewis base; (1) in the presence of pyridine, only the dative bond adduct pyridine-B(C(6)F(5))(3) is observed; (2) in the presence of TMP and MeTMP, only the free B(C(6)F(5))(3) is observed; and (3) in the presence of Lut, both the free B(C(6)F(5))(3) and the Lut-B(C(6)F(5))(3) adduct appear in equilibrium. A measure of the change in K(eq) of Lut + B(C(6)F(5))(3) ⇔ Lut-B(C(6)F(5))(3) as a function of temperature provides thermodynamic properties of the Lewis acid Lewis base adduct, ΔH = -17.9(1.0) kcal mol(-1) and a ΔS = -49.2(2.5) cal mol(-1) K, suggesting the Lut-B(C(6)F(5))(3) adduct is more stable in bromobenzene than in toluene.

Fluorescence solvatochromism in lumichrome and excited-state tautomerization: a combined experimental and DFT study

Fluorescence solvatochromism of lumichrome (LC) was studied by steady-state and time-resolved fluorescence spectroscopy. The excited-state properties of LC do not show any correlation with solvent polarity, however, reasonably good correlation with solvent E(T)(30) parameter was observed. A quantitative estimation of contribution from different solvatochromic parameters, like solvent polarizability (π*), hydrogen bond donor (α), and hydrogen bond acceptor (β) ability of the solvent, was made using linear free energy relationship on the basis of Kamlet-Taft equation. The analysis reveals that hydrogen bond donating ability (acidity) of the solvent is the most important parameter that characterizes the excited-state behavior of lumichrome. Quantum mechanical calculations using density functional theory (DFT) were done to study the most stable structure and excited-state tautomerization process of LC toward the formation of isoalloxazines. Charge localization in the excited state and formation of hydrogen-bonded cluster through solvent hydrogen bond donation on the N10 atom of alloxazine moiety were predicted to be the key step toward this water-catalyzed tautomerization process.