Saddle Distortion of a Sterically Unhindered Porphyrin Ring in a Copper Porphyrin with Electron-Donating Substituents

Inducing ring distortions in unsubstituted metallophthalocyanines using axial N-heterocyclic carbenes

A series of metallophthalocyanine (PcM) complexes with axial N-heterocyclic carbene ligands (NHC; 1,3-diisopropylimidazol-2-ylidene (DIP) and 1,3-dimethylbenzimidazol-2-ylidene (DMB)) were prepared and structurally characterized. PcCoII(DIP), PcZnII(DIP), and PcZnII(DMB) are five-coordinate complexes with mild dome-type Pc-ring distortions, while PcFeII(DIP)2 is six-coordinate and has a very large ruffle-type ring-distortion with respect to typical PcM(L)2 systems. The distortion is induced by the highly steric axial DIP ligands. The distortions were quantified and classified by their bond lengths and torsion angles, and according to the normal-coordinate structural decomposition (NSD) analysis. Upon ligation of the NHC, the insoluble PcM materials were solublized in common organic solvents, with typical UV-visible Q-band maxima observable between 658 and 677 nm; the increased solubility is rationalized in terms of the reduced solid-state aggregation of the complexes, attributable to the axial ligation.

Hybrid Hydrogen-Bonded Organic Frameworks: Structures and Functional Applications

As a new class of porous crystalline materials, hydrogen-bonded organic frameworks (HOFs) assembled from building blocks by hydrogen bonds have gained increasing attention. HOFs benefit from advantages including mild synthesis, easy purification, and good recyclability. However, some HOFs transform into unstable frameworks after desolvation, which hinders their further applications. Nowadays, the main challenges of developing HOFs lie in stability improvement, porosity establishment, and functionalization. Recently, more and more stable and permanently porous HOFs have been reported. Of all these design strategies, stronger charge-assisted hydrogen bonds and coordination bonds have been proven to be effective for developing stable, porous, and functional solids called hybrid HOFs, including ionic and metallized HOFs. This Review discusses the rational design synthesis principles of hybrid HOFs and their cutting-edge applications in selective inclusion, proton conduction, gas separation, catalysis and so forth.

Highly Selective Oxygen/Nitrogen Separation Membrane Engineered Using a Porphyrin-Based Oxygen Carrier

Air separation is very important from the viewpoint of the economic and environmental advantages. In this work, defect-free facilitated transport membranes based on poly(amide-12-b-ethylene oxide) (Pebax-2533) and tetra(p-methoxylphenyl)porphyrin cobalt chloride (T(p-OCH₃)PPCoCl) were fabricated in systematically varied compositions for O₂/N₂ separation. T(p-OCH₃)PPCoCl was introduced as carriers that selectively and reversibly interacted with O₂ and facilitated O₂ transport in the membrane. The T(p-OCH₃)PPCoCl had good compatibility with the Pebax-2533 via the hydrogen bond interaction and formed a uniform and thin selective layer on the substrate. The O₂ separation performance of the thin film composite (TFC) membranes was improved by adding a small amount of the T(p-OCH₃)PPCoCl and decreasing the feed pressure. At the pressure of 0.035 MPa, the O₂ permeability and O₂/N₂ selectivity of the 0.6 wt % T(p-OCH₃)PPCoCl/Pebax-2533 was more than 3.5 times that of the Pebax-2533 TFC membrane, which reached the 2008 Robeson upper bound. It provides a candidate membrane material for O₂/N₂ efficient separation in moderate conditions.

Heterocorrole Conformations: Little Saddling, Much Ruffling

10-Heterocorrole complexes with oxygen, sulfur, and selenium at position 10 of the macrocycle and with the divalent ions of nickel, copper, and palladium were prepared and investigated. The focus was set on the size adaptation and matching mechanisms of cavity size versus ionic radius in corrole-type macrocycles. A full set of single-crystal X-ray analytical data revealed that in all but one case the N₄ binding site of the ring-contracted tetrapyrrole was larger than necessary to bind the metal ion without deformation. In-plane size adaptation through M-N bond-length elongation by 2.5-3.2 % was effective, as well as pronounced out-of-plane ruffling of the macrocycle for those compounds with a more severe size mismatch. Such ruffling had been excluded for corroles previously, but is apparently the most efficient mechanism to adapt to small central ions.

Synthesis, spectroscopic characterization and thermogravimetric analysis of two series of substituted (metallo)tetraphenylporphyrins

Subsequent treatment of H₂TPP(CO₂H)₄ (tetra(p-carboxylic acid phenyl)porphyrin, 1) with an excess of oxalyl chloride and HNR₂ afforded H₂TPP(C(O)NR₂)₄ (R = Me, 2; iPr, 3) with yields exceeding 80%. The porphyrins 2 and 3 could be converted to the corresponding metalloporphyrins MTPP(C(O)NR₂)₄ (R = Me/iPr for M = Zn (2a, 3a); Cu (2b, 3b); Ni (2c, 3c); Co (2d, 3d)) by the addition of 3 equiv of anhydrous MCl₂ (M = Zn, Cu, Ni, Co) to dimethylformamide solutions of 2 and 3 at elevated temperatures. Metalloporphyrins 2a-d and 3a-d were obtained in yields exceeding 60% and have been, as well as 2 and 3, characterized by elemental analysis, electrospray ionization mass spectrometry (ESIMS) and IR and UV-vis spectroscopy. Porphyrins 2, 2a-d and 3, 3a-d are not suitable for organic molecular beam deposition (OMBD), which is attributed to their comparatively low thermal stability as determined by thermogravimetric analysis (TG) of selected representatives.

Self-Assembly and External Modulation of a Flexible Porphyrin Derivative on Highly Oriented Pyrolytic Graphite

With the aid of scanning tunneling microscopy, we have examined the two-dimensional hydrogen-bonded networks of carboxyl-functionalized porphyrin derivative H₂TCPp molecules at the heptanoic acid/HOPG interface. Moreover, we have successfully modulated the self-assembly structure of H₂TCPp by introducing 1,2-di(4-pyridyl)ethylene molecules into the assembled system. By performing density functional theory calculations, we also revealed the formation mechanisms of the different assemblies and the modulation process. Comparing the self-assembly structures at the liquid/solid interface with those in bulk crystals, we have obtained deep insight into the differences in H₂TCPp assemblies between 2D and 3D networks. Furthermore, this research is expected to deepen our understanding of on-surface phenomena and to provide a feasible process toward 2D assembly regulation.

An insight into the communication between β-olefin/phenyl olefin-mediated acceptors and porphyrin π-system: a way to establish porphyrin based chemodosimeters and chemosensors

Porphyrins bearing electron acceptors attached to β-carbon through olefin or phenyl–olefin bridges act as chemodosimeters for CN⁻ as well as chemosensors for F⁻, CN⁻ and OAc⁻ ions depends on acceptor strength and position.

Synthesis and photophysical properties of β-triazole bridged porphyrin–coumarin dyads

Novel β-triazole bridged porphyrin–coumarin dyads are synthesized via a Cu(i)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction and evaluated for their photophysical properties.

Steric bulkiness of pyrrole substituents and the out-of-plane deformations of porphyrins: nickel(II) octaisopropylporphyrin and its meso-nitro derivative

Sterically bulky substituents at the β-carbons of the pyrrole rings of porphyrins are sufficient to cause large out-of-plane porphyrin distortions even in the absence of substituent groups at the meso carbons. It is well established that substituents at the meso-positions only or at both the β-pyrrole and the meso-positions are sufficiently bulky to result in large non-planar distortions of the macrocycle. However, no systematic studies of the effects of bulky β-pyrrole substituents alone have been reported. Herein, molecular simulations and X-ray crystallography of nickel(II) 2,3,7,8,12,13,17,18-octa(isopropyl)porphyrin reveal that large out-of-plane distortions (>1.5 Å) are induced by the steric repulsion of the β-isopropyl groups but fail to lead to a single strongly energetically favored conformer. The molecular simulations indicate that multiple conformers differing in the orientation of the isopropyl groups and the macrocycle conformation coexist in solution and this is confirmed by resonance Raman spectroscopy. Large downshifts in the structure-sensitive lines result from the non-planar distortion, and line broadenings result from structural heterogeneity. The heterogeneity originates from tradeoffs between energy contributions from steric repulsion and macrocycle distortion. Simulations for 5-nitro-2,3,7,8,12,13,17,18-octa(isopropyl)porphyrin suggest two possible orientations of the nitro group with respect to the macrocycle mean plane — one nearly vertical (as in the crystal structure) and another that is nearly parallel. INDO/S semiempirical calculations indicate an orbital of the NO2 group resides between the porphyrin frontier orbitals with significant mixing of the nitro and porphyrin orbitals.KEYWORDS: porphyrin, non-planar, resonance Raman, X-ray crystallography, crystal structure, isopropyl, nitro, conformer, molecular mechanics, molecular simulations, density functional theory, steric crowding, conformational heterogeneity.

Photofabrication of fullerene-shelled quantum dots supramolecular nanoparticles for solar energy harvesting

Quantum dots-based electron donor-acceptor systems play a rising role in the design of renewable and carbon-free energy harvesting technologies. In this article, we discuss the photofabrication of fullerene-shelled quantum dots supramolecular nanoparticles, in which the fullerene shell acts as not only a well-defined electron acceptor but also a robust protecting layer against the photocorrosion of the quantum dot core. We evaluate the ensemble and single-molecule electron transfer from the core to the shell in the nanoparticles and the photocurrent response of a photoelectrochemical cell constructed using the nanoparticles. The supramolecular nanoparticle has been prepared by the covalent tethering of a fullerene-thiol monolayer to the quantum dot followed by the photochemical reactions of free fullerene-thiol to the tethered monolayer. The nanoparticles are characterized using scanning electron microscopy, atomic force microscopy, and X-ray photoelectron spectroscopy. Correlated single-photon emission and the two-state ON-OFF photoluminescence show that single quantum dots are included in the supramolecular nanoparticles. The fullerene-shells suppress the blinking of single quantum dots by acting as well-defined electron traps, without allowing the transfer of Auger electrons to unknown traps. Electron transfer from the quantum dot-core to the fullerene-shell is apparent from the short ON and OFF durations in the photoluminescence intensity trajectories of single quantum dots, quenching of the photoluminescence intensity and lifetime of quantum dots at the ensemble level, and the characteristic transient absorption band of the anion radical of fullerene. We next construct a photoelectrochemical cell using the supramolecular nanoparticles, and the transferred electron is externally driven in the cell to generate ∼400 μA/cm(2) photocurrent. Electron transfer from the highly stable quantum dots to the protecting fullerene-shells places the supramolecular nanoparticles among the most promising antenna systems for the construction of cost-effective and stable next generation solar energy harvesting systems.