Enhanced π-Conjugation and Emission via Icosahedral Carboranes: Synthetic and Spectroscopic Investigation

A Pd-catalyzed route to carborane-fused boron heterocycles

Due to the expanding applications of icosahedral carboranes in medicinal and materials chemistry research, their functionalizations have become one of the central themes in boron-rich cluster chemistry. Although several strategies for incorporating nitrogen-containing nucleophiles on a single boron vertex of the icosahedral carboranes (C2B10H12) have been developed, methods for preparing clusters with vicinal B-N moieties are still lacking. The steric bulk of icosahedral carboranes and disparate electronic and steric nature of the N-containing groups have rendered the vicinal diamination challenging. In this article, we show how a developed Pd-catalyzed process is used to incorporate an array of NH-heterocycles, anilines, and heteroanilines with various electronic and steric profiles onto the vicinal boron vertices of a meta-carborane cluster via sequential or one-pot fashion. Importantly, oxidative cyclizations of the cross-coupling products with indoles and pyrroles appended to boron vertices generate a previously unknown class of all-boron-vertex bound carborane-fused six- and seven-membered ring heterocycles. Photophysical studies of the meta-carborane-fused heterocycles show that these structures can exhibit luminescence with high quantum yields and are amenable to further manipulations.

The Rise of Boron-Containing Compounds: Advancements in Synthesis, Medicinal Chemistry, and Emerging Pharmacology

Boron-containing compounds (BCC) have emerged as important pharmacophores. To date, five BCC drugs (including boronic acids and boroles) have been approved by the FDA for the treatment of cancer, infections, and atopic dermatitis, while some natural BCC are included in dietary supplements. Boron's Lewis acidity facilitates a mechanism of action via formation of reversible covalent bonds within the active site of target proteins. Boron has also been employed in the development of fluorophores, such as BODIPY for imaging, and in carboranes that are potential neutron capture therapy agents as well as novel agents in diagnostics and therapy. The utility of natural and synthetic BCC has become multifaceted, and the breadth of their applications continues to expand. This review covers the many uses and targets of boron in medicinal chemistry.

Relationship between the Molecular Geometry and the Radiative Efficiency in Naphthyl-Based Bis-Ortho-Carboranyl Luminophores

The efficiency of intramolecular charge transfer (ICT)-based emission on π-aromatic-group-appended closo-ortho-carboranyl luminophores is known to be affected by structural fluctuations and molecular geometry, but investigation of this relationship has been in progress to date. In this study, four naphthyl-based bis-o-carboranyl compounds, in which hydrogen (15CH and 26CH) or trimethysilyl groups (15CS and 26CS) were appended at the o-carborane cage, were synthesized and fully characterized. All the compounds barely displayed an emissive trace in solution at 298 K; however, 15CH and 26CH distinctly exhibited a dual emissive pattern in rigid states (in solution at 77 K and in films), attributed to locally excited (LE) and ICT-based emission, while 15CS and 26CS showed strong ICT-based greenish emission. Intriguingly, the molecular structures of the four compounds, analyzed by single X-ray crystallography, showed that the C-C bond axis of the o-carborane cage in the trimethysilyl group-appended compounds 15CS and 26CS were more orthogonal to the plane of the appended naphthyl group than those in 15CH and 26CH. These features indicate that 15CS and 26CS present an efficient ICT transition based on strong exo-π-interaction, resulting in a higher quantum efficiency (Φ_em) for ICT-based radiative decay than those of 15CH and 26CH. Moreover, the 26CS structure revealed most orthogonal geometry, resulting in the highest Φ_em and lowest k_nr values for the ICT-based emission. Consequently, all the findings verified that efficient ICT-based radiative decay of aromatic group-appended o-carboranyl luminophores could be achieved by the formation of a specific geometry between the o-carborane cage and the aromatic plane.

o-Carborane-based fluorophores as efficient luminescent systems both as solids and as water-dispersible nanoparticles

A set of o-carborane-appended π-conjugated fluorophores and their light-emitting properties in the solid state are reported. The aggregation-induced emission enhancement (AIEE) exhibited for one of the fluorenyl derivatives paved the way to successfully preparing o-carborane-containing organic nanoparticles (NPs) homogeneously dispersed in aqueous media that maintain their luminescence properties. Notably, NPs processed as thin films also show high fluorescence efficiency, suggesting potential optical and optoelectronic applications.

Three types of charged ligand-based neutral phosphorescent iridium(III) complexes featuring nido-carborane: synthesis, structures, and solution processed organic light-emitting diode applications

In view of the fact that coordination configurations and special functional groups are both important for the optical properties of phosphorescent iridium complex materials, we have prepared a novel family of three types of charged ligand (0, -1, and -2) based neutral phosphorescent iridium(III) complexes (Ir1-Ir4) featuring nido-carborane. Single crystal structures indicate that complexes (Ir2, Ir3 and Ir4) with nido-carborane as a functional group at different substitution sites all show a trans-C^C configuration between dianionic (-2) and monoanionic (-1) ligands, which are different from the trans-N^C configuration in complex Ir1 with nido-carborane as a coordination skeleton, which has an interesting Ir-B coordination bond. Notably, Ir2, Ir3 and Ir4 all show obvious yellow light emission, while Ir1 does not emit light either in solution or in the solid state. DFT calculations demonstrate that complexes Ir2, Ir3 and Ir4 exhibit an unusual ligand-to-metal charge transfer (LMCT) excited state character due to the strong electron-donating character of nido-carborane. Considering its better solubility and luminescence properties, Ir3 was successfully applied in solution-processed organic light-emitting diodes and an effective yellow emission was achieved. This work provides a new strategy for the investigation of three types of charged ligand (0, -1, and -2) based phosphorescent iridium complex materials by constructing new dianionic ligands with nido-carborane.

Alteration of intramolecular electronic transition via deboronation of carbazole-based o-carboranyl compound and intriguing 'turn-on' emissive variation

The conversion of closo-o-carborane-containing compounds to the nido-o-species via deboronation causes photophysical changes that could be used for sensing applications. 9-Methyl-9H-carbazole-based closo- (closo-Cz) and nido-o-carboranyl (nido-Cz) compounds were prepared and fully characterised by multinuclear NMR spectroscopy and elemental analysis, and the solid-state molecular structure of closo-Cz was analysed by X-ray crystallography. Although the closo-compound exhibited an emissive pattern centred at λ em = ca. 530 nm in the rigid state only (in THF at 77 K and as a film), nido-Cz demonstrated intense emission in the near-UV region (λ em = ca. 380 nm) in both solution and film states at 298 K. The positive solvatochromic effect of nido-Cz and the results of theoretical calculations for both the o-carboranyl compounds supported that these emissive features originate from intramolecular charge transfer (ICT) corresponding to the o-carborane. Furthermore, the calculations verified that the electronic role of the o-carboranyl unit changed from acceptor to donor upon deboronation from closo-Cz to nido-Cz. Investigations of the radiative decay mechanisms of closo-Cz and nido-Cz according to their quantum efficiencies (Φ em) and decay lifetimes (τ obs) suggested that the ICT-based radiative decays of closo-Cz and nido-Cz readily occur in the film (solid) and solution state, respectively. These observations implied that the emission of closo-Cz in the solution state could be drastically enhanced by deboronation to nido-Cz upon exposure to an increasing concentration of fluoride anions. Indeed, turn-on emissive features in an aqueous solution were observed upon deboronation, strongly suggesting the potential of closo-Cz as a turn-on and visually detectable chemodosimeter for fluoride ion sensing.

Strategic molecular design of closo-ortho-carboranyl luminophores to manifest thermally activated delayed fluorescence

In this paper, we propose a strategic molecular design of closo-o-carborane-based donor-acceptor dyad system that exhibits thermally activated delayed fluorescence (TADF) in the solution state at ambient temperature. Planar 9,9-dimethyl-9H-fluorene-based compounds with closo- and nido-o-carborane cages appended at the C2-, C3-, and C4-positions of each fluorene moiety (closo-type: 2FC, 3FC, 4FC, and 4FCH, and nido-type: nido-4FC = [nido-form of 4FC]·[NBu4]) were prepared and characterized. The solid-state molecular structure of 4FC exhibited a significantly distorted fluorene plane, which suggests the existence of severe intramolecular steric hindrance. In photoluminescence measurements, 4FC exhibits a noticeable intramolecular charge transition (ICT)-based emission in all states (solution at 298 K and 77 K, and solid states); however, emissions by other closo-compounds were observed in only the rigid state (solution at 77 K and film). Furthermore, nido-4FC did not exhibit emissive traces in any state. These observations verify that all radiative decay processes correspond to ICT transitions triggered by closo-o-carborane, which acts as an electron acceptor. Relative energy barriers calculated by TD-DFT as dihedral angles around o-carborane cages change in closo-compounds, which indicates that the structural formation of 4FC is nearly fixed around its S0-optimized structure. This differs from that for other closo-compounds, wherein the free rotation of their o-carborane cages occurs easily at ambient temperature. Such rigidity in the structural geometry of 4FC results in ICT-based emission in solution at 298 K and enhancement of quantum efficiency and radiative decay constants compared to those for other closo-compounds. Furthermore, 4FC displays short-lived (∼0.5 ns) and long-lived (∼30 ns) PL decay components in solution at 298 K and in the film state, respectively, which can be attributed to prompt fluorescence and TADF, respectively. The calculated energy difference (ΔE ST) between the first excited singlet and triplet states of the closo-compounds demonstrate that the TADF characteristic of 4FC originates from a significantly small ΔE ST maintained by the rigid structural fixation around its S0-optimized structure. Furthermore, the strategic molecular design of the o-carborane-appended π-conjugated (D-A) system, which forms a rigid geometry due to severe intramolecular steric hindrance, can enhance the radiative efficiency for ICT-based emission and trigger the TADF nature.

Boron clusters as breast cancer therapeutics

Since the foundation of small molecule-based therapeutics over 100 years ago, their design has been dominated by organic based components. This has also been apparent in anti-cancer therapeutics in a broad range of strategies; from the older DNA chelating drugs, to the more recent molecular-targeted therapies. The main challenges facing current treatments; multidrug resistance and low therapeutic index, can potentially be alleviated by the incorporation of boron clusters. While retaining the versatility of their organic counterparts, these compounds offer a unique set of molecular interactions, which are a useful tool in targeted therapies and can improve many organic formulations with their incorporation. This review will discuss the potential of boron clusters in medicine while focusing on their activity in the breast cancer setting.

Tuning the Liquid Crystallinity of Cholesteryl-o-Carborane Dyads: Synthesis, Structure, Photoluminescence, and Mesomorphic Properties

A set of mesomorphic materials in which the o-carborane cluster is covalently bonded to a cholesteryl benzoate moiety (mesogen group) through a suitably designed linker is described. The olefin cross-metathesis between appropriately functionalized styrenyl-o-carborane derivatives and a terminal alkenyl cholesteryl benzoate mesogen (all type I terminal olefins) leads to the desired trans-regioisomer, which is the best-suited configuration to obtain mesomorphic properties in the final materials. The introduction of different substituents (R = H (M2), Me (M3), or Ph (M4)) to one of the carbon atoms of the o-carborane cluster (Ccluster) enables the tailoring of liquid crystalline properties. Compounds M2 and M3 show the chiral nematic (N*) phase, whereas M4 do not show liquid crystal behavior. Weaker intermolecular interactions in the solid M3 with respect to those in M2 may allow the liquid crystallinity in M3 to be expressed as enantiotropic behavior, whereas breaking the stronger intermolecular interaction in the solid state of M2 leads directly to the isotropic state, resulting in monotropic behavior. Remarkably, M3 also displays the blue phase, which was observed neither in the chiral nematic precursor nor in the styrenyl-cholesterol model (M5) without an o-carborane cluster, which suggests that the presence of the cluster plays a role in stabilizing this highly twisted chiral phase. In the carborane-containing mesogens (M2 and M3), the o-carborane cluster can be incorporated without destroying the helical organization of the mesophase.

Expanding the Scope of Palladium-Catalyzed B - N Cross-Coupling Chemistry in Carboranes

Over the past several years, a number of strategies for the functionalization of dicarba-closo-dodecaboranes (carboranes) have emerged. Despite these developments, B - N bond formation on the carborane scaffold remains a challenge due to the propensity of strong nucleophiles to partially deboronate the parent closo-carborane cluster into the corresponding nido form. Here we show that azide, sulfonamide, cyanate, and phosphoramidate nucleophiles can be straightforwardly cross-coupled onto the B(9) vertices of the o- and m-carborane core from readily accessible precursors without significant deboronation by-products, laying the groundwork for further study into the utility and properties of these new B-aminated carborane species. We further showcase select reactivity of the installed functional groups highlighting some unique features stemming from the combination of the electron-donating B(9) position and the large steric profile of the B-connected carborane substituent.

Preparation of dendritic carboranyl glycoconjugates as potential anticancer therapeutics

A series of carborane-appended glycoconjugates containing three and six glucose and galactose moieties have been synthesized via Cu(i)-catalyzed azide-alkyne [3 + 2] click cycloaddition reaction. The carboranyl glycoconjugates containing three glucose and galactose moieties were found to be partially water soluble whereas increasing the number to six made them completely water soluble. The evaluation of cytotoxicities and IC50 values of newly synthesized carboranyl glycoconjugates was carried out using two cancerous cell lines (MCF-7 breast cancer cells and A431 skin cancer cells) and one normal cell line (HaCaT skin epidermal cell line). All carboranyl glycoconjugates showed higher cytotoxicities towards cancerous cell lines than the normal cell line. Carboranyl glycoconjugates containing three glucose and galactose moieties (compounds 15 and 17) were found to be more cytotoxic than the glycoconjugates containing six glucose and galactose moieties (compounds 19 and 21). Moreover, administration of 100 μM concentrations of compounds 15 and 17 inhibited up to 83% of MCF-7 breast cancer cells and up to 79% A431 skin cancer cells. However, administration of similar concentrations of carboranyl glycoconjugates could inhibit only up to 35-45% of HaCaT normal epidermal cells. Thus, due to the higher cytotoxicities of dendritic carboranyl glycoconjugates towards cancer cells over healthy cells, they could potentially be useful for bimodal treatment of cancer such as chemotherapy agents and boron neutron capture therapy (BNCT) agents as well.

Deboronation-Induced Ratiometric Emission Variations of Terphenyl-Based Closo-o-Carboranyl Compounds: Applications to Fluoride-Sensing

Closo-o-carboranyl compounds bearing the ortho-type perfectly distorted or planar terphenyl rings (closo-DT and closo-PT, respectively) and their nido-derivatives (nido-DT and nido-PT, respectively) were synthesized and fully characterized using multinuclear NMR spectroscopy and elemental analysis. Although the emission spectra of both closo-compounds exhibited intriguing emission patterns in solution at 298 and 77 K, in the film state, closo-DT mainly exhibited a π-π* local excitation (LE)-based emission in the high-energy region, whereas closo-PT produced an intense emission in the low-energy region corresponding to an intramolecular charge transfer (ICT) transition. In particular, the positive solvatochromic effect of closo-PT and theoretical calculation results at the first excited (S₁) optimized structure of both closo-compounds strongly suggest that these dual-emissive bands at the high- and low-energy can be assigned to each π-π* LE and ICT transition. Interestingly, both the nido-compounds, nido-DT and nido-PT, exhibited the only LE-based emission in solution at 298 K due to the anionic character of the nido-o-carborane cages, which cannot cause the ICT transitions. The specific emissive features of nido-compounds indicate that the emissive color of closo-PT in solution at 298 K is completely different from that of nido-PT. As a result, the deboronation of closo-PT upon exposure to increasing concentrations of fluoride anion exhibits a dramatic ratiometric color change from orange to deep blue via turn-off of the ICT-based emission. Consequently, the color change response of the luminescence by the alternation of the intrinsic electronic transitions via deboronation as well as the structural feature of terphenyl rings indicates the potential of the developed closo-o-carboranyl compounds that exhibit the intense ICT-based emission, as naked-eye-detectable chemodosimeters for fluoride ion sensing.

Blue Emitting Star-Shaped and Octasilsesquioxane-Based Polyanions Bearing Boron Clusters. Photophysical and Thermal Properties

High boron content systems were prepared by the peripheral functionalisation of 1,3,5-triphenylbenzene (TPB) and octavinylsilsesquioxane (OVS) with two different anionic boron clusters: closo-dodecaborate (B12) and cobaltabisdicarbollide (COSAN). TPB was successfully decorated with three cluster units by an oxonium ring-opening reaction, while OVS was bonded to eight clusters by catalysed metathesis cross-coupling. The resulting compounds were spectroscopically characterised, and their solution-state photophysical properties analysed. For TPB, the presence of COSAN dramatically quenches the fluorescence emission (λem = 369 nm; ΦF = 0.8%), while B12-substituted TPB shows an appreciable emission efficiency (λem = 394 nm; ΦF = 12.8%). For octasilsesquioxanes, the presence of either COSAN or B12 seems to be responsible for ∼80 nm bathochromic shift with respect to the core emission, but both cases show low emission fluorescence (ΦF = 1.4-1.8%). In addition, a remarkable improvement of the thermal stability of OVS was observed after its functionalisation with these boron clusters.

Insights into the effects of substitution position on the photophysics of mono-o-carborane-substituted pyrenes

Mono-o-carborane-substituted pyrenes were prepared and apparently showed the effects of substitution position on their photophysical property.

Anthracene–styrene-substituted m-carborane derivatives: insights into the electronic and structural effects of substituents on photoluminescence

Efficient light emitters based on anthracene derivatives were developed. We prove that m-carborane is a perfect scaffold for coupling to anthracene giving rise to superb emitters in solution, while keeping the emission properties in aggregate state.

Spirobifluorene-Based o-Carboranyl Compounds: Insights into the Rotational Effect of Carborane Cages on Photoluminescence

9,9'-Spirobifluorene-based closo-o-carboranyl (SFC1 and SFC2) compounds and their nido-derivatives (nido-SFC1 and nido-SFC2) were prepared and characterized. The two closo-compounds displayed major absorption bands assignable to π-π* transitions involving the spirobifluorene group, as well as weak intramolecular charge-transfer (ICT) transitions between the o-carboranes and their spirobifluorene moieties. The nido-compounds exhibited slightly blueshifted absorption bands resulting from the absence of the ICT transitions corresponding to the o-carborane moieties due to the anionic character of the nido-o-carboranes. While SFC1 exhibited only high-energy emissions in THF at 298 K (only from locally excited (LE) states assignable to π-π* transitions on the spirobifluorene group), remarkable emissions in the low-energy region were observed in the rigid state such as in THF at 77 K and in the film state. SFC2 displayed intense emissions in the low-energy region in all states. The fact that neither of the nido-derivatives of SFC1 and SFC2 exhibited low-energy emissions and the TD-DFT calculation results of each closo-compound clearly verified that the low-energy emission was based on ICT-based radiative decay. The conformational barriers from each relative energy calculation upon changing the dihedral angles around the o-carborane cages for both compounds confirmed that the rotation of the o-carborane cages and terminal phenyl rings for SFC1 is freer than that for SFC2.

Planarity of terphenyl rings possessing o-carborane cages: turning on intramolecular-charge-transfer-based emission

To clarify the relationship between planarity and intramolecular charge transfer (ICT), two o-carboranyl compounds (TCB and FCB) containing different ortho-type terphenyl rings, namely, perfectly distorted or planar phenyl rings, were synthesised and fully characterised. Although the emission spectra of both compounds presented intriguing dual-emission patterns in solution at 298 or 77 K and in the film state, distorted TCB mostly showed locally excited emission, whereas planar FCB demonstrated intense emission corresponding to an ICT transition. Interestingly, the emission efficiencies and radiative decay constants of terphenyl-based o-carboranyl compounds were gradually enhanced by increasing the planarity of the terphenyl groups. These results verify the existence of a strong relationship between the planarity of appended aryl groups and ICT-based radiative decay in o-carborane-substituted compounds.

Photophysical Properties of Spirobifluorene-Based o-Carboranyl Compounds Altered by Structurally Rotating the Carborane Cages

9,9′-Spirobifluorene-based o-carboranyl compounds C1 and C2 were prepared and fully characterized by multinuclear nuclear magnetic resonance (NMR) spectroscopy and elemental analysis. The solid-state structure of C1 was also determined by single-crystal X-ray diffractometry. The two carboranyl compounds display major absorption bands that are assigned to π−π* transitions involving their spirobifluorene groups, as well as weak intramolecular charge-transfer (ICT) transitions between the o-carboranes and their spirobifluorene groups. While C1 only exhibited high-energy emissions (λ_em = ca. 350 nm) in THF at 298 K due to locally excited (LE) states assignable to π−π* transitions involving the spirobifluorene group alone, a remarkable emission in the low-energy region was observed in the rigid state, such as in THF at 77 K or the film state. Furthermore, C2 displays intense dual emissive patterns in both high- and low-energy regions in all states. Electronic transitions that were calculated by time-dependent-DFT (TD-DFT) for each compound based on ground (S₀) and first-excited (S₁) state optimized structures clearly verify that the low-energy emissions are due to ICT-based radiative decays. Calculated energy barriers that are based on the relative energies associated with changes in the dihedral angle around the o-carborane cages in C1 and C2 clearly reveal that the o-carborane cage in C1 rotates more freely than that in C2. All of the molecular features indicate that ICT-based radiative decay is only available to the rigid state in the absence of structural fluctuations, in particular the free-rotation of the o-carborane cage.

Synthesis of 9-borafluorene analogues featuring a three-dimensional 1,1'-bis(o-carborane) backbone

The synthesis of [1,1'-bis(o-carboranyl)]boranes was achieved through the deprotonation of 1,1'-bis(o-carborane) reagents followed by salt metathesis with (iPr)2NBCl2. X-ray crystallography confirms planar central BC4 rings and Gutmann-Beckett studies reveal an increase in Lewis acidity at the boron center in comparison to their biphenyl congener, 9-borafluorene.

Thermal and Photophysical Properties of Highly Quadrupolar Liquid-Crystalline Derivatives of the [closo-B12 H12 ]2- Anion

Two series of 1,12-bis-zwitterionic derivatives of the [closo-B₁₂ H₁₂ ]^2- anion (B), containing either two 4-alkoxypyridinium groups (1B[n]-p) or one 4-alkoxypyridinium and one 4-pentylthianium groups (2B[n]-p), were prepared and their structural (XRD, DFT), thermal, and photophysical properties were compared with those of the analogous derivatives of the [closo-B₁₀ H₁₀ ]^2- anion (1A[n]-p and 2A[n]-p). Some 1,7-derivatives of B were isolated and investigated. Both series 1[n] and 2[n] exhibit nematic and crystalline polymorphism; the 12-vertex derivatives (B) have higher transition temperatures than those of the 10-vertex analogues (A). All compounds fluoresce with quantum yields higher for 1B (Φ_F =0.37 for 1B[7]-p and Φ_F =0.27 for 2B[7]-p) than those for the 10-vertex analogues (Φ_F =0.04 for 2A[5]-p). DFT calculations demonstrate an order of magnitude lower first hyperpolarizability, β_(-ω,ω,0) , for 2B[7]-p than that for the 10-vertex analogue 2A[7]-p (1.7×10^-30 vs. 18.9×10^-30  esu at ω=0).

Effect of Planarity of Aromatic Rings Appended to o-Carborane on Photophysical Properties: A Series of o-Carboranyl Compounds Based on 2-Phenylpyridine- and 2-(Benzo[b]thiophen-2-yl)pyridine

Herein, we investigated the effect of ring planarity by fully characterizing four pyridine-based o-carboranyl compounds. o-Carborane was introduced to the C4 position of the pyridine rings of 2-phenylpyridine and 2-(benzo[b]thiophen-2-yl)pyridine (CB1 and CB2, respectively), and the compounds were subsequently borylated to obtain the corresponding C^∧N-chelated compounds CB1B and CB2B. Single-crystal X-ray diffraction analysis of the molecular structures of CB2 and CB2B confirmed that o-carborane is appended to the aryl moiety. In photoluminescence experiments, CB2, but not CB1, showed an intense emission, assignable to intramolecular charge transfer (ICT) transition between the aryl and o-carborane moieties, in both solution and film states. On the other hand, in both solution and film states, CB1B and CB2B demonstrated a strong emission, originating from π-π * transition in the aryl groups, that tailed off to 650 nm owing to the ICT transition. All intramolecular electronic transitions in these o-carboranyl compounds were verified by theoretical calculations. These results distinctly suggest that the planarity of the aryl groups have a decisive effect on the efficiency of the radiative decay due to the ICT transition.

2-Phenylpyridine- and 2-(benzo[b]thiophen-2-yl)pyridine-based o-carboranyl compounds: impact of the structural formation of aromatic rings on photophysical properties

2-Phenylpyridine and 2-(benzo[b]thiophen-2-yl)pyridine-based o-carboranyl compounds showed intriguing emission that depended on the structural formation.

Highly Emissive Organic Single-Molecule White Emitters by Engineering o-Carborane-Based Luminophores

The development of organic single-molecule solid-state white emitters holds a great promise for advanced lighting and display applications. Highly emissive single-molecule white emitters were achieved by the design and synthesis of a series of o-carborane-based luminophores. These luminophores are able to induce multiple emissions to directly emit high-purity white light in solid state. By tuning both molecular and aggregate structures, a significantly improved white-light efficiency has been realized (absolute quantum yield 67 %), which is the highest value among the known organic single-molecule white emitters in the solid state. The fine-tuning of the packing modes from H- to J- and cross-stacking aggregates as well as intermolecular hydrogen bonds are successful in one molecular skeleton. These are crucial for highly emissive white-light emission in the solid state.

Solid-State Emission of the Anthracene-o-Carborane Dyad from the Twisted-Intramolecular Charge Transfer in the Crystalline State

The emission process of the o-carborane dyad with anthracene originating from the twisted intramolecular charge transfer (TICT) state in the crystalline state is described. The anthracene-o-carborane dyad was synthesized and its optical properties were investigated. Initially, the dyad had aggregation- and crystallization-induced emission enhancement (AIEE and CIEE) properties via the intramolecular charge transfer (ICT) state. Interestingly, the dyad presented the dual-emissions assigned to both locally excited (LE) and ICT states in solution. From the mechanistic studies and computer calculations, it was indicated that the emission band from the ICT should be attributable to the TICT emission. Surprisingly, even in the crystalline state, the TICT emission was observed. It was proposed from that the compact sphere shape of o-carborane would allow for rotation even in the condensed state.

Boron clusters in luminescent materials

In recent times, luminescent materials with tunable emission properties have found applications in almost all aspects of modern material sciences. Any discussion on the recent developments in luminescent materials would be incomplete if one does not account for the versatile photophysical features of boron containing compounds. Apart from triarylboranes and tetra-coordinate borate dyes, luminescent materials consisting of boron clusters have also found immense interest in recent times. Recent studies have unveiled the opportunities hidden within boranes, carboranes and metalloboranes, etc. as active constituents of luminescent materials. From simple illustrations of luminescence, to advanced applications in LASERs, OLEDs and bioimaging, etc., the unique features of such compounds and their promising versatility have already been established. In this review, recent revelations about the excellent photophysical properties of such materials are discussed.