Control of the photocatalytic activity of bimetallic complexes of pyropheophorbide-a by nucleic acids

Red light-triggered photoreduction on a nucleic acid template

Conjugate Sn(iv)(pyropheophorbide a)dichloride-(peptide nucleic acid) catalyzes reduction of azobenzene derivatives in the presence of complementary nucleic acid (NA) upon irridiation with red light (660 nm). This is the first red light-induced NA-templated photoreduction. It is highly sensitive to single mismatches in the NA-template and can detect down to 5 nM NAs.

Tailored Transition-Metal Coordination Environments in Imidazole-Modified DNA G-Quadruplexes

Two types of imidazole ligands were introduced both at the end of tetramolecular and into the loop region of unimolecular DNA G‐quadruplexes. The modified oligonucleotides were shown to complex a range of different transition‐metal cations including Ni^II, Cu^II, Zn^II and Co^II, as indicated by UV/Vis absorption spectroscopy and ion mobility mass spectrometry. Molecular dynamics simulations were performed to obtain structural insight into the investigated systems. Variation of ligand number and position in the loop region of unimolecular sequences derived from the human telomer region (htel) allows for a controlled design of distinct coordination environments with fine‐tuned metal affinities. It is shown that Cu^II, which is typically square‐planar coordinated, has a higher affinity for systems offering four ligands, whereas Ni^II prefers G‐quadruplexes with six ligands. Likewise, the positioning of ligands in a square‐planar versus tetrahedral fashion affects binding affinities of Cu^II and Zn^II cations, respectively. Gaining control over ligand arrangement patterns will spur the rational development of transition‐metal‐modified DNAzymes. Furthermore, this method is suited to combine different types of ligands, for example, those typically found in metalloenzymes, inside a single DNA architecture.

Red Light Triggered Fluorogenic Reaction with Picomolar Sensitivity Toward Nucleic Acids

We have previously reported on a red light triggered, singlet oxygen-mediated fluorogenic reaction that is templated in a highly sequence specific fashion by nucleic acids (S. Dutta, A. Fulop, A. Mokhir, Bioconjgate Chem. 2013, 24 (9), 1533-1542). Up to the present date, it has remained a single templated reaction responsive to nontoxic >650 nm light. However, it is operative only in the presence of relatively high (>2 nM) concentrations of templates that dramatically limit its applicability in nucleic acid detection. In the current work, we established that an inefficient intermolecular electron transfer involved in reduction of the 1,4-endoperoxide intermediate, formed in the rate-limiting reaction step, is responsible for inhibition of the reaction at low reagent concentrations. We suggested the solution of the problem which includes a combination of a cleavable (9-alkoxyanthracene) moiety with a two-electron donating fragment in one molecule. This approach enables the efficient intramolecular electron transfer to the endoperoxide intermediate in the critical reaction step. Due to the intramolecular character of the latter process, it is practically independent of concentration of the reagents. The reaction based on the improved cleavable moiety was found to be >200-fold more sensitive than the previously reported one. It is fast, sequence specific, and compatible with live cells. Accounting for short reactions times (<30 min), nontoxic trigger (red light), excellent sensitivity, and sequence specificity, this is presently the best reported photochemical templated reaction compatible with live cells.

DNA-Dye-Conjugates: Conformations and Spectra of Fluorescence Probes

Extensive molecular-dynamics (MD) simulations have been used to investigate DNA-dye and DNA-photosensitizer conjugates, which act as reactants in templated reactions leading to the generation of fluorescent products in the presence of specific desoxyribonucleic acid sequences (targets). Such reactions are potentially suitable for detecting target nucleic acids in live cells by fluorescence microscopy or flow cytometry. The simulations show how the attached dyes/photosensitizers influence DNA structure and reveal the relative orientations of the chromophores with respect to each other. Our results will help to optimize the reactants for the templated reactions, especially length and structure of the spacers used to link reporter dyes or photosensitizers to the oligonucleotides responsible for target recognition. Furthermore, we demonstrate that the structural ensembles obtained from the simulations can be used to calculate steady-state UV-vis absorption and emission spectra. We also show how important quantities describing the quenching of the reporter dye via fluorescence resonance energy transfer (FRET) can be calculated from the simulation data, and we compare these for different relative chromophore geometries.

Nano-enabled SERS reporting photosensitizers

To impart effective cellular damage via photodynamic therapy (PDT), it is vital to deliver the appropriate light dose and photosensitizer concentration, and to monitor the PDT dose delivered at the site of interest. In vivo monitoring of photosensitizers has in large part relied on their fluorescence emission. Palladium-containing photosensitizers have shown promising clinical results by demonstrating near full conversion of light to PDT activity at the cost of having undetectable fluorescence. We demonstrate that, through the coupling of plasmonic nanoparticles with palladium-photosensitizers, surface-enhanced Raman scattering (SERS) provides both reporting and monitoring capability to otherwise quiescent molecules. Nano-enabled SERS reporting of photosensitizers allows for the decoupling of the therapeutic and imaging mechanisms so that both phenomena can be optimized independently. Most importantly, the design enables the use of the same laser wavelength to stimulate both the PDT and imaging features, opening the potential for real-time dosimetry of photosensitizer concentration and PDT dose delivery by SERS monitoring.

Isothermal amplified detection of DNA and RNA

This review highlights various methods that can be used for a sensitive detection of nucleic acids without using thermal cycling procedures, as is done in PCR or LCR. Topics included are nucleic acid sequence-based amplification (NASBA), strand displacement amplification (SDA), loop-mediated amplification (LAMP), Invader assay, rolling circle amplification (RCA), signal mediated amplification of RNA technology (SMART), helicase-dependent amplification (HDA), recombinase polymerase amplification (RPA), nicking endonuclease signal amplification (NESA) and nicking endonuclease assisted nanoparticle activation (NENNA), exonuclease-aided target recycling, Junction or Y-probes, split DNAZyme and deoxyribozyme amplification strategies, template-directed chemical reactions that lead to amplified signals, non-covalent DNA catalytic reactions, hybridization chain reactions (HCR) and detection via the self-assembly of DNA probes to give supramolecular structures. The majority of these isothermal amplification methods can detect DNA or RNA in complex biological matrices and have great potential for use at point-of-care.

Singlet oxygen in DNA nanotechnology

CONSPECTUS: Singlet oxygen ((1)O2), the first excited electronic state of molecular oxygen, is a significant molecule, despite its minute size. For more than half a century, the molecule has been widely used and studied in organic synthesis, due to its characteristic oxygenation reactions. Furthermore, (1)O2 plays a key role in mechanisms of cell death, which has led to its use in therapies for several types of cancer and other diseases. The high abundance of oxygen in air provides a wonderful source of molecules that can be excited to the reactive singlet state, for example, by UV/vis irradiation of a photosensitizer molecule. Although convenient, this oxygen abundance also presents some challenges for purposes that require (1)O2 to be generated in a controlled manner. In the past decade, we and others have employed DNA nanostructures to selectively control and investigate the generation, lifetime, and reactions of (1)O2. DNA-based structures are one of the most powerful tools for controlling distances between molecules on the nanometer length scale, in particular for systems that closely resemble biological settings, due to their inherent ability to specifically form duplex structures with well-defined and predictable geometries. Here, we present some examples of how simple DNA structures can be employed to regulate (1)O2 production by controlling the behavior of (1)O2-producing photosensitizers through their interactions with independent quencher molecules. We have developed different DNA-based systems in which (1)O2 production can be switched ON or OFF in the presence of specific DNA sequences or by changing the pH of the solution. To further illustrate the interplay between DNA structures and (1)O2, we present three pieces of research, in which (1)O2 is used to activate or deactivate DNA-based systems based on the reaction between (1)O2 and cleavable linkers. In one example, it is demonstrated how a blocked oligonucleotide can be released upon irradiation with light of a specific wavelength. In more complex systems, DNA origami structures composed of more than 200 individual oligonucleotides were employed to study (1)O2 reactions in spatially resolved experiments on the nanoscale.

Reducing product inhibition in nucleic acid-templated ligation reactions: DNA-templated cycligation

Programmable interactions allow nucleic acid molecules to template chemical reactions by increasing the effective molarities of appended reactive groups. DNA/RNA-triggered reactions can proceed, in principle, with turnover in the template. The amplification provided by the formation of many product molecules per template is a valuable asset when the availability of the DNA or RNA target is limited. However, turnover is usually impeded by reaction products that block access to the template. Product inhibition is most severe in ligation reactions, where products after ligation have dramatically increased template affinities. We introduce a potentially generic approach to reduce product inhibition in nucleic acid-programmed ligation reactions. A DNA-triggered ligation-cyclization sequence ("cycligation") of bifunctional peptide nucleic acid (PNA) conjugates affords cyclic ligation products. Melting experiments revealed that product cyclization is accompanied by a pronounced decrease in template affinity compared to linear ligation products. The reaction system relies upon haloacetylated PNA-thioesters and isocysteinyl-PNA-cysteine conjugates, which were ligated on a DNA template according to a native chemical ligation mechanism. Dissociation of the resulting linear product-template duplex (induced by, for example, thermal cycling) enabled product cyclization through sulfur-halide substitution. Both ligation and cyclization are fast reactions (ligation: 86 % yield after 20 min, cyclization: quantitative after 5 min). Under thermocycling conditions, the DNA template was able to trigger the formation of new product molecules when fresh reactants were added. Furthermore, cycligation produced 2-3 times more product than a conventional ligation reaction with substoichiometric template loads (0.25-0.01 equiv). We believe that cyclization of products from DNA-templated reactions could ultimately afford systems that completely overcome product inhibition.

Very rapid DNA-templated reaction for efficient signal amplification and its steady-state kinetic analysis of the turnover cycle

Oligonucleotide-templated reactions are powerful tools for the detection of nucleic acid sequences. One of the major scientific challenges associated with this technique is the rational design of non-enzyme-mediated catalytic templated reactions capable of multiple turnovers that provide high levels of signal amplification. Herein, we report the development of a nucleophilic aromatic substitution reaction-triggered fluorescent probe. The probe underwent a rapid templated reaction without any of the undesired background reactions. The fluorogenic reaction conducted in the presence of a template provided a 223-fold increase in fluorescence after 30 s compared with the nontemplated reaction. The probe provided an efficient level of signal amplification that ultimately enabled particularly sensitive levels of detection. Assuming a simple model for the templated reactions, it was possible to estimate the rate constants of the chemical reaction in the presence and in the absence of the template. From these kinetic analyses, it was possible to confirm that an efficient turnover cycle had been achieved, on the basis of the dramatic enhancement in the rate of the chemical reaction considered to be the rate-determining step. With maximized turnover efficiency, it was demonstrated that the probe could offer a high turnover number of 1500 times to enable sensitive levels of detection with a detection limit of 0.5 pM in the catalytic templated reactions.

Long-lived luminogenic probe for detection of RNA in a crude solution of living bacterial cells

A pre-type sensitizer for a lanthanide complex on an oligonucleotide was successfully converted to a perfect final structure in a target DNA/RNA-templated reaction, without any chemical reagent or enzyme, under neutral conditions. The final form of the lanthanide-oligonucleotide provided a long-lived luminescence signal, appropriate for time-gated luminescence analysis and signal amplification. Target DNA/RNA-assisted time-gated luminescence analysis is a powerful tool for elimination of autofluorescence and detection of target RNA in living bacterial cells.