Red-light-driven photocatalytic reduction of CO2 using Os(II)-Re(I) supramolecular complexes

Fluorinated chlorin chromophores for red-light-driven CO2 reduction

The utilization of low-energy photons in light-driven reactions is an effective strategy for improving the efficiency of solar energy conversion. In nature, photosynthetic organisms use chlorophylls to harvest the red portion of sunlight, which ultimately drives the reduction of CO2. However, a molecular system that mimics such function is extremely rare in non-noble-metal catalysis. Here we report a series of synthetic fluorinated chlorins as biomimetic chromophores for CO2 reduction, which catalytically produces CO under both 630 nm and 730 nm light irradiation, with turnover numbers of 1790 and 510, respectively. Under appropriate conditions, the system lasts over 240 h and stays active under 1% concentration of CO2. Mechanistic studies reveal that chlorin and chlorinphlorin are two key intermediates in red-light-driven CO2 reduction, while corresponding porphyrin and bacteriochlorin are much less active forms of chromophores.

Efficient Visible-Light-Driven Carbon Dioxide Reduction using a Bioinspired Nickel Molecular Catalyst

Inspired by natural enzymes, this study presents a nickel-based molecular catalyst, [Ni‖(N2S2)]Cl2 (NiN2S2, N2S2=2,11-dithia[3,3](2,6)pyridinophane), for the photochemical catalytic reduction of CO2 under visible light. The catalyst was synthesized and characterized using various techniques, including liquid chromatography-high resolution mass spectrometry (LC-HRMS), UV-Visible spectroscopy, and X-ray crystallography. The crystallographic analysis revealed a slightly distorted octahedral coordination geometry with a mononuclear Ni2+ cation, two nitrogen atoms and two sulfur atoms. Photocatalytic CO2 reduction experiments were performed in homogeneous conditions using the catalyst in combination with [Ru(bpy)3]Cl2 (bpy=2,2'-bipyridine) as a photosensitizer and 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH) as a sacrificial electron donor. The catalyst achieved a high selectivity of 89 % towards CO and a remarkable turnover number (TON) of 7991 during 8 h of visible light irradiation under CO2 in the presence of phenol as a co-substrate. The turnover frequency (TOF) in the initial 6 h was 1079 h-1, with an apparent quantum yield (AQY) of 1.08 %. Controlled experiments confirmed the dependency on the catalyst, light, and sacrificial electron donor for the CO2 reduction process. These findings demonstrate this bioinspired nickel molecular catalyst could be effective for fast and efficient photochemical catalytic reduction of CO2 to CO.

Photocatalytic CO2 Reduction Using an Osmium Complex as a Panchromatic Self-Photosensitized Catalyst: Utilization of Blue, Green, and Red Light

The photocatalytic reduction of carbon dioxide (CO2) represents an attractive approach for solar-energy storage and leads to the production of renewable fuels and valuable chemicals. Although some osmium (Os) photosensitizers absorb long wavelengths in the visible-light region, a self-photosensitized, mononuclear Os catalyst for red-light-driven CO2 reduction has not yet been exploited. Here, we discovered that the introduction of an Os metal to a PNNP-type tetradentate ligand resulted in the absorption of light with longer-wavelength (350-700 nm) and that can be applied to a panchromatic self-photosensitized catalyst for CO2 reduction to give mainly carbon monoxide (CO) with a total turnover number (TON) of 625 under photoirradiation (λ≥400 nm). CO2 photoreduction also proceeded under irradiation with blue (λ0=405 nm), green (λ0=525 nm), or red (λ0=630 nm) light to give CO with >90 % selectivity. The quantum efficiency using red light was determined to be 12 % for the generation of CO. A catalytic mechanism is proposed based on the detection of intermediates using various spectroscopic techniques, including transient absorption, electron paramagnetic resonance, and UV/Vis spectroscopy.

Photocatalytic conversion of CO2 to CO by Ru(II) and Os(II) octahedral complexes: a DFT/TDDFT study

The reaction mechanisms of the photocatalytic reduction of CO2 to CO catalyzed by [(en)M(CO)3Cl] complexes (M = Ru, Os, en = ethylenediamine) in the presence of triethanolamine (TEOA), R3N (R = -CH2CH2OH), in DCM and DMF solvents, were studied by means of DFT/TDDFT electronic structure calculations. The geometric and free energy reaction profiles for two possible reaction pathways were calculated. Both reaction pathways studied, start with the 17e-, catalytically active intermediate, [(en)M(CO)3]˙+ generated from the first triplet excited state, T1 upon reductive quenching by TEOA which acts as a sacrificial electron donor. In the first possible pathway, TEOA- anion binds to the metal center of the catalytically active intermediate, [(en)M(CO)3]˙+ followed by CO2 insertion into the M-OCH2CH2NR2 bond. The latter upon successive protonations releases a metal 'free' [R2NCH2CH2OC(O)(OH)] intermediate which starts a new and final catalytic cycle, leading to the formation of CO and H2O while regenarating TEOA. In the second possible pathway, the 17e-, catalytically active intermediate, [(en)M(CO)3]˙+ captures CO2 molecule, forming an η1-CO2 complex. Upon 2H+/2e- successive protonations and reductions, CO product is obtained along with regenarating the catalytically active intermediate [(en)M(CO)3]˙+. The nature of the proton donor affects the reaction profiles of both mechanisms. The nature of the solvent does not affect significantly the reaction mechanisms under study. Finally, since photoexcitation and T1 reductive quenching are common to both pathways, we have srutinized the photophysical properties of the [(en)M(CO)3Cl] complexes along with their T1 excited states reduction potentials, . The [(en)M(CO)3Cl] complexes absorb mainly in the UV region while the absolute are in the range 6.4-0.9 eV.

Accumulative Charge Separation in a Modular Quaterpyridine Bridging Ligand Platform and Multielectron Transfer Photocatalysis of π-Linked Dinuclear Ir(III)-Re(I) Complex for CO2 Reduction

Four sterically distorted quaterpyridyl (qpy) ligand-bridged Ir(III)-Re(I) heterometallic complexes (Ir-qpy_mm-Re, Ir-qpy_mp-Re, Ir-qpy_pm-Re, and Ir-qpy_pp-Re), in which the position of the coupling pyridine unit of the two 2,2'-bipyridine ligands was varied (meta (m)- or para (p)-position), pypy_x-py_xpy (x = m and m, qpy_mm; x = m and p, qpy_mp; x = p and m, qpy_pm; x = p and p, qpy_pp), were prepared, along with the fully π-conjugated Ir(III)-[π linker]-Re(I) complexes (π linker = 2,2'-bipyrimidine (bpm), Ir-bpm-Re; π linker = 2,5-di(pyridin-2-yl)pyrazine (dpp), Ir-dpp-Re) to elucidate the electron mediating and accumulative charge separation properties of the bridging π-linker in a bimetallic system (photosensitizer-π linker-catalytic center). From the photophysical and electrochemical studies, it was found that the quaterpyridyl (qpy) bridging ligand (BL), in which the two planar Ir/Re metalated bipyridine (bpy) ligands were connected but slightly canted relative to each other, linking the heteroleptic Ir(III) photosensitizer, [(^piqC^N)₂Ir^III(bpy)]⁺, and catalytic Re(I) complex, (bpy)Re^I(CO)₃Cl, minimized the energy lowering of the qpy BL, which hampers the forward photoinduced electron transfer (PET) process from [(^piqC^N)₂Ir^III(N^N)]⁺ to (N^N)Re^I(CO)₃Cl (E_red1 = -(0.85-0.93) V and E_red2 = -(1.15-1.30) V vs SCE). This result contrasts with the fully π-delocalized bimetallic systems (Ir-bpm-Re and Ir-dpp-Re) that show a significant energy reduction due to the considerable π-extension and deshielding effect caused by the neighboring Lewis acidic metals (Ir and Re) on the electrochemical scale (E_red1 = -0.37 V and E_red2 = -1.02 and -0.99 V vs SCE). Based on a series of anion absorption studies and spectroelectrochemical (SEC) analyses, all Ir(III)-BL-Re(I) bimetallic complexes were found to exist as dianionic form (Ir(III)-[BL]^2--Re(I)) after a fast reductive-quenching process in the presence of excess electron donor. In the photolysis experiment, the four Ir-qpy-Re complexes displayed the reasonable photochemical CO₂-to-CO conversion activities (TON of 366-588 for 19 h) owing to the moderated electronic coupling between two functional Ir(III) and Re(I) centers through the slightly distorted qpy ligand, whereas Ir-bpm-Re and Ir-dpp-Re displayed negligible performances as a result of the strong electronic coupling via π-conjugation between the two functional components resulting in the energetic constraints for PET and an unwanted side reactions competing with the forward processes. These results confirm that the qpy unit can be utilized as an efficient BL platform in π-linked bimetallic systems.

Origin of intersystem crossing in highly distorted organic molecules: a case study with red light-absorbing N,N,O,O-boron-chelated Bodipys

To explore the relationship between the twisted π-conjugation framework of aromatic chromophores and the efficacy of intersystem crossing (ISC), we have studied a N,N,O,O-boron-chelated Bodipy derivative possessing a severely distorted molecular structure. Surprisingly, this chromophore is highly fluorescent, showing inefficient ISC (singlet oxygen quantum yield, Φ_Δ = 12%). These features differ from those of helical aromatic hydrocarbons, where the twisted framework promotes ISC. We attribute the inefficient ISC to a large singlet-triplet energy gap (ΔE_S1/T1 = 0.61 eV). This postulate is tested by critical examination of a distorted Bodipy having an anthryl unit at the meso-position, for which Φ_Δ is increased to 40%. The improved ISC yield is rationalized by the presence of a T₂ state, localized on the anthryl unit, with energy close to that of the S₁ state. The electron spin polarization phase pattern of the triplet state is (e, e, e, a, a, a), with the T_z sublevel of the T₁ state overpopulated. The small zero-field splitting D parameter (-1470 MHz) indicates that the electron spin density is delocalized over the twisted framework. It is concluded that twisting of π-conjugation framework does not necessarily induce ISC, but S₁/T_n energy matching may be a generic feature for increasing ISC for a new-generation of heavy atom-free triplet photosensitizers.

Supramolecular multi-electron redox photosensitisers comprising a ring-shaped Re(i) tetranuclear complex and a polyoxometalate

Redox photosensitisers (PSs) play essential roles in various photocatalytic reactions. Herein, we synthesised new redox PSs of 1 : 1 supramolecules that comprise a ring-shaped Re(i) tetranuclear complex with 4+ charges and a Keggin-type heteropolyoxometalate with 4- charges. These PSs photochemically accumulate multi-electrons in one molecule (three or four electrons) in the presence of an electron donor and can supply electrons with different reduction potentials. PSs were successfully applied in the photocatalytic reduction of CO2 using catalysts (Ru(ii) and Re(i) complexes) and triethanolamine as a reductant. In photocatalytic reactions, these supramolecular PSs supply a different number of electrons to the catalyst depending on the redox potential of the intermediate, which is made from the one-electron-reduced species of the catalyst and CO2. Based on these data, information on the reduction potentials of the intermediates was obtained.

Photocatalytic Systems for CO2 Reduction: Metal-Complex Photocatalysts and Their Hybrids with Photofunctional Solid Materials

Photocatalytic CO₂ reduction is a critical objective in the field of artificial photosynthesis because it can potentially make a total solution for global warming and shortage of energy and carbon resources. We have successfully developed various highly efficient, stable, and selective photocatalytic systems for CO₂ reduction using transition metal complexes as both photosensitizers and catalysts. The molecular architectures for constructing selective and efficient photocatalytic systems for CO₂ reduction are discussed herein. As a typical example, a mixed system of a ring-shaped Re(I) trinuclear complex as a photosensitizer and fac-[Re(bpy)(CO)₃{OC₂H₄N(C₂H₄OH)₂}] as a catalyst selectively photocatalyzed CO₂ reduction to CO with the highest quantum yield of 82% and a turnover number (TON) of over 600. Not only rare and noble metals but also earth abundant ones, such as Mn(I), Cu(I), and Fe(II) can be used as central metal cations. In the case using a Cu(I) dinuclear complex as a photosensitizer and fac-Mn(bpy)(CO)₃Br as a catalyst, the total formation quantum yield of CO and HCOOH from CO₂ was 57% and TON_CO+HCOOH exceeded 1300.

Efficient supramolecular photocatalysts for CO₂ reduction, in which photosensitizer and catalyst units are connected through a bridging ligand, were developed for removing a diffusion control on collisions between a photosensitizer and a catalyst. Supramolecular photocatalysts, in which [Ru(N^∧N)₃]²⁺-type photosensitizer and Re(I) or Ru(II) catalyst units are connected to each other with an alkyl chain, efficiently and selectively photocatalyzed CO₂ reduction in solutions. Mechanistic studies using time-resolved IR and electrochemical measurements provided molecular architecture for constructing efficient supramolecular photocatalysts. A Ru(II)–Re(I) supramolecular photocatalyst constructed according to this molecular architecture efficiently photocatalyzed CO₂ reduction even when it was fixed on solid materials. Harnessing this property of the supramolecular photocatalysts, two types of hybrid photocatalytic systems were developed, namely, photocatalysts with light-harvesting capabilities and photoelectrochemical systems for CO₂ reduction.

Introduction of light-harvesting capabilities into molecular photocatalytic systems should be important because the intensity of solar light shone on the earth’s surface is relatively low. Periodic mesoporous organosilica, in which methyl acridone groups are embedded in the silica framework as light harvesters, was combined with a Ru(II)–Re(I) supramolecular photocatalyst with phosphonic acid anchoring groups. In this hybrid, the photons absorbed by approximately 40 methyl acridone groups were transferred to one Ru(II) photosensitizer unit, and then, the photocatalytic CO₂ reduction commenced.

To use water as an abundant electron donor, we developed hybrid photocatalytic systems combining metal-complex photocatalysts with semiconductor photocatalysts that display high photooxidation powers, in which two photons are sequentially absorbed by the metal-complex photosensitizer and the semiconductor, resulting in both high oxidation and reduction power. Various types of dye-sensitized molecular photocathodes comprising the p-type semiconductor electrodes and the supramolecular photocatalysts were developed. Full photoelectrochemical cells combining these dye-sensitized molecular photocathodes and n-type semiconductor photoanodes achieved CO₂ reduction using only visible light as the energy source and water as the reductant. Drastic improvement of dye-sensitized molecular photocathodes is reported.

The results presented in this Account clearly indicate that we can construct very efficient, selective, and durable photocatalytic systems constructed with the metal-complex photosensitizers and catalysts. The supramolecular-photocatalyst architecture in which the photosensitizer and the catalyst are connected to each other is useful especially on the surface of solid owing to rapid electron transfer from the photosensitizer to the catalyst. On basis of these findings, we successfully constructed hybrid systems of the supramolecular photocatalysts with photoactive solid materials. These hybridizations can add new functions to the metal-complex photocatalytic systems, such as water oxidation and light harvesting.

Photocatalytic turnover of CO2 under visible light by [Re(CO)3(1-(1,10) phenanthroline-5-(4-nitro-naphthalimide))Cl] in tandem with the sacrificial donor BIH

Optimized photocatalytic conversion of CO2 requires new potent catalysts that can absorb visible light. The photocatalytic reduction of CO2 using rhenium(i) has been demonstrated but suffers from low turnover. Herein, we describe a [Re(CO)3(1-(1,10)phenanthroline-5-(4-nitro-naphthalimide))Cl] photocatalyst, which when combined with the sacrificial donor 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole, results in selective production of formic acid and a high turnover number of 533 and turnover frequency of 356 h-1. Single-crystal X-ray diffraction and DFT studies are also discussed.

Reticular-Chemistry-Inspired Supramolecule Design as a Tool to Achieve Efficient Photocatalysts for CO2 Reduction

Photocatalytic CO₂ reduction into C1 products is one of the most trending research subjects of current times as sustainable energy generation is the utmost need of the hour. In this review, we have tried to comprehensively summarize the potential of supramolecule-based photocatalysts for CO₂ reduction into C1 compounds. At the outset, we have thrown light on the inert nature of gaseous CO₂ and the various challenges researchers are facing in its reduction. The evolution of photocatalysts used for CO₂ reduction, from heterogeneous catalysis to supramolecule-based molecular catalysis, and subsequent semiconductor-supramolecule hybrid catalysis has been thoroughly discussed. Since CO₂ is thermodynamically a very stable molecule, a huge reduction potential is required to undergo its one- or multielectron reduction. For this reason, various supramolecule photocatalysts were designed involving a photosensitizer unit and a catalyst unit connected by a linker. Later on, solid semiconductor support was also introduced in this supramolecule system to achieve enhanced durability, structural compactness, enhanced charge mobility, and extra overpotential for CO₂ reduction. Reticular chemistry is seen to play a pivotal role as it allows bringing all of the positive features together from various components of this hybrid semiconductor-supramolecule photocatalyst system. Thus, here in this review, we have discussed the selection and role of various components, viz. the photosensitizer component, the catalyst component, the linker, the semiconductor support, the anchoring ligands, and the peripheral ligands for the design of highly performing CO₂ reduction photocatalysts. The selection and role of various sacrificial electron donors have also been highlighted. This review is aimed to help researchers reach an understanding that may translate into the development of excellent CO₂ reduction photocatalysts that are operational under visible light and possess superior activity, efficiency, and selectivity.

Development of a panchromatic photosensitizer and its application to photocatalytic CO2 reduction

We designed and synthesized a heteroleptic osmium(ii) complex with two different tridentate ligands, Os. Os can absorb the full wavelength range of visible light owing to S–T transitions, and this was supported by TD-DFT calculations. Excitation of Os using visible light of any wavelength generates the same lowest triplet metal-to-ligand charge-transfer excited state, the lifetime of which is relatively long (τ_em = 40 ns). Since excited Os could be reductively quenched by 1,3-dimethyl-2-(o-hydroxyphenyl)-2,3-dihydro-1H-benzo[d]imidazole, Os displays high potential as a panchromatic photosensitizer. Using a combination of Os and a ruthenium(ii) catalyst, CO₂ was photocatalytically reduced to HCOOH via irradiation with 725 nm light, and the turnover number reached 81; irradiation with light at λ_ex > 770 nm also photocatalytically induced HCOOH formation. These results clearly indicate that Os can function as a panchromatic redox photosensitizer.

The osmium(ii) complex functioned as a panchromatic photosensitizer and drove CO₂ reduction.

Secondary Coordination Effect on Monobipyridyl Ru(II) Catalysts in Photochemical CO2 Reduction: Effective Proton Shuttle of Pendant Brønsted Acid/Base Sites (OH and N(CH3)2) and Its Mechanistic Investigation

While the incorporation of pendant Brønsted acid/base sites in the secondary coordination sphere is a promising and effective strategy to increase the catalytic performance and product selectivity in organometallic catalysis for CO₂ reduction, the control of product selectivity still faces a great challenge. Herein, we report two new trans(Cl)-[Ru(6-X-bpy)(CO)₂Cl₂] complexes functionalized with a saturated ethylene-linked functional group (bpy = 2,2'-bipyridine; X = -(CH₂)₂-OH or -(CH₂)₂-N(CH₃)₂) at the ortho(6)-position of bpy ligand, which are named Ru-bpy^OH and Ru-bpy^diMeN, respectively. In the series of photolysis experiments, compared to nontethered case, the asymmetric attachment of tethering ligand to the bpy ligand led to less efficient but more selective formate production with inactivation of CO₂-to-CO conversion route during photoreaction. From a series of in situ FTIR analyses, it was found that the Ru-formate intermediates are stabilized by a highly probable hydrogen bonding between pendent proton donors (-diMeN⁺H or -OH) and the oxygen atom of metal-bound formate (Ru^I-OCHO···H-E-(CH₂)₂-, E = O or diMeN⁺). Under such conformation, the liberation of formate from the stabilized Ru^I-formate becomes less efficient compared to the nontethered case, consequently lowering the CO₂-to-formate conversion activities during photoreaction. At the same time, such stabilization of Ru-formate species prevents the dehydration reaction route (η¹-OCHO → η¹-COOH on Ru metal) which leads toward the generation of Ru-CO species (key intermediate for CO production), eventually leading to the reduction of CO₂-to-CO conversion activity.

Mechanistic study of photocatalytic CO2 reduction using a Ru(ii)-Re(i) supramolecular photocatalyst

Supramolecular photocatalysts comprising [Ru(diimine)₃]²⁺ photosensitiser and fac-[Re(diimine)(CO)₃{OC(O)OC₂H₄NR₂}] catalyst units can be used to reduce CO₂ to CO with high selectivity, durability and efficiency. In the presence of triethanolamine, the Re catalyst unit efficiently takes up CO₂ to form a carbonate ester complex, and then direct photocatalytic reduction of a low concentration of CO₂, e.g., 10% CO₂, can be achieved using this type of supramolecular photocatalyst. In this work, the mechanism of the photocatalytic reduction of CO₂ was investigated applying such a supramolecular photocatalyst, RuC2Re with a carbonate ester ligand, using time-resolved visible and infrared spectroscopies and electrochemical methods. Using time-resolved spectroscopic measurements, the kinetics of the photochemical formation processes of the one-electron-reduced species RuC2(Re)−, which is an essential intermediate in the photocatalytic reaction, were clarified in detail and its electronic structure was elucidated. These studies also showed that RuC2(Re)− is stable for 10 ms in the reaction solution. Cyclic voltammograms measured at various scan rates besides temperature and kinetic analyses of RuC2(Re)− produced by steady-state irradiation indicated that the subsequent reaction of RuC2(Re)− proceeds with an observed first-order rate constant of approximately 1.8 s⁻¹ at 298 K and is a unimolecular reaction, independent of the concentrations of both CO₂ and RuC2(Re)−.

Formation processes and reactivity of an important intermediate of photocatalytic CO₂ reduction, one-electron reduced species of a Ru(ii)–Re(i) supramolecular photocatalyst with a carbonate ester ligand, were investigated in detail.

Rhodium catalysts with cofactor mimics for the biomimetic reduction of CN bonds

Bio-inspired reduction of CN bonds was successfully performed using rhodium catalysts containing cofactor mimics. The intramolecular cooperation between rhodium and cofactor mimics enabled the transformation with good selectivity. A plausible mechanism was also proposed.

Direct Observation of the S0 → T2 Transition in Phosphorescent Platinum(II) Octaethylporphyrin, Evidenced by Magnetic Circular Dichroism

In recent years, the importance of analyzing excited triplet states has increased dramatically because of their relevance in the design and development of photofunctional molecules. Since the second lowest excited triplet (T₂) state plays an important role in enhancing the nonradiative intersystem crossing (ISC) process from the lowest excited singlet (S₁) state to the lowest excited triplet (T₁) state, it is strongly desired to develop direct observation methods for the nonluminescent, short-lived T₂ state. In this study, the excited triplet states of platinum(II) octaethylporphyrin (PtOEP), which was used as the first phosphorescent organic light emitting diode and oxygen sensor, are investigated using UV-vis absorption, magnetic circular dichroism, and phosphorescence spectroscopies. At low temperature, in highly concentrated solutions, we observe a distinct Faraday A term for the S₀ → T₁ transition, as well as for the S₀ → T₂ transition. The novel spectroscopic methodology applied allows resolution of the excited-state properties of a wide variety of molecular systems.

Factors determining formation efficiencies of one-electron-reduced species of redox photosensitizers

Improvement in the photochemical formation efficiency of one-electron-reduced species (OERS) of a photoredox photosensitizer (a redox catalyst) is directly linked to the improvement in efficiencies of the various photocatalytic reactions themselves. We investigated the primary processes of a photochemical reduction of two series [Ru(diimine)₃]²⁺ and [Os(diimine)₃]²⁺ as frequently used redox photosensitizers (PS²⁺), by 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH) as a typical reductant in detail using steady-irradiation and time-resolved spectroscopies. The rate constants of all elementary processes of the photochemical reduction of PS²⁺ by BIH to give the free PS•⁺ were obtained or estimated. The most important process for determining the formation efficiency of the free PS•⁺ was the escape yield from the solvated ion pair [PS•⁺-BIH•⁺], which was strongly dependent on both the central metal ion and the ligands. In cases with the same central metal ion, the system with larger -ΔG_bet, which is the free energy change in the back-electron transfer from the OERS of PS•⁺ to BIH•⁺, tended to lower the escape yield of the free OERS of PS²⁺. On the other hand, different central metal ions drastically affected the escape yield even in cases with similar -ΔG_bet; the escape yield in the case of RuH²⁺ (-ΔG_bet = 1.68 eV) was 5-11 times higher compared to those of OsH²⁺ (-ΔG_bet = 1.60 eV) and OsMe²⁺ (-ΔG_bet = 1.71 eV). The back-electron transfer process from the free PS•⁺ to the free BIH•⁺ could not compete against the further reaction of the free BIH•⁺, which is the deprotonation process giving BI•, in DMA for all examples. The produced BI• gave one electron to PS²⁺ in the ground state to give another PS•⁺, quantitatively. Based on these findings and investigations, it is clarified that the photochemical formation efficiency of the free PS•⁺ should be affected not only by -ΔG_bet but also by the heavy-atom effect of the central metal ion, and/or the oxidation power of the excited PS²⁺, which should determine the distance between the excited PS and BIH at the moment of the electron transfer.

Improving photosensitization for photochemical CO2-to-CO conversion

Inspired by nature, improving photosensitization represents a vital direction for the development of artificial photosynthesis. The sensitization ability of photosensitizers (PSs) reflects in their electron-transfer ability, which highly depends on their excited-state lifetime and redox potential. Herein, for the first time, we put forward a facile strategy to improve sensitizing ability via finely tuning the excited state of Ru(II)-PSs (Ru-1–Ru-4) for efficient CO₂ reduction. Remarkably, [Ru(Phen)₂(3-pyrenylPhen)]²⁺ (Ru-3) exhibits the best sensitizing ability among Ru-1–Ru-4, over 17 times higher than that of typical Ru(Phen)₃²⁺. It can efficiently sensitize a dinuclear cobalt catalyst for CO₂-to-CO conversion with a maximum turnover number of 66 480. Systematic investigations demonstrate that its long-lived excited state and suitable redox driving force greatly contributed to this superior sensitizing ability. This work provides a new insight into dramatically boosting photocatalytic CO₂ reduction via improving photosensitization.

Photocatalytic CO2 reduction using metal complexes in various ionic liquids

Aiming to diversify photocatalytic systems for CO2 reduction using metal complexes, this study investigated the use of various ionic liquids as reaction solvents. The photophysical properties of an Ir(iii) complex, functioning as a photosensitiser, and the photocatalytic ability of mixed systems consisting of the Ir(iii) photosensitiser and a Re(i) catalyst in twelve kinds of ionic liquids were systematically investigated by comparison with those in N,N-dimethylacetamide (DMA), which is a standard solvent for photocatalytic CO2 reduction. Even though the photophysical properties of the Ir(iii) complex in ionic-liquid solutions were quite similar to those in DMA, both the photosensitising ability of the Ir complex and the photocatalytic abilities of the systems strongly depended on the structures of the ionic liquids. Several ionic liquids were successfully used as new solvents for the photocatalytic systems showing durability similar to or higher than DMA solutions. The results demonstrated that even a small modification of the molecular structures of ionic liquids can control the efficiencies of both the photosensitising cycles and the catalytic cycles for CO2 reduction.

Dinuclear metal complexes: multifunctional properties and applications

Dinuclear metal complexes have enabled breakthroughs in OLEDs, photocatalytic water splitting and CO₂reduction, DSPEC, chemosensors, biosensors, PDT and smart materials.

Improving Photocatalysis for the Reduction of CO2 through Non-covalent Supramolecular Assembly

We report the enhancement of photocatalytic performance by introduction of hydrogen-bonding interactions to a Re bipyridine catalyst and Ru photosensitizer system (ReDAC/RuDAC) by the addition of amide substituents, with carbon monoxide (CO) and carbonate/bicarbonate as products. This system demonstrates a more-than-3-fold increase in turnover number (TON_CO = 100 ± 4) and quantum yield (Φ_CO = 23.3 ± 0.8%) for CO formation compared to the control system using unsubstituted Ru photosensitizer (RuBPY) and ReDAC (TON_CO = 28 ± 4 and Φ_CO = 7 ± 1%) in acetonitrile (MeCN) with 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH) as sacrificial reductant. In dimethylformamide (DMF), a solvent that disrupts hydrogen bonds, the ReDAC/RuDAC system showed a decrease in catalytic performance while the control system exhibited an increase, indicating the role of hydrogen bonding in enhancing the photocatalysis for CO₂ reduction through supramolecular assembly. The similar properties of RuDAC and RuBPY demonstrated in lifetime measurements, spectroscopic analysis, and electrochemical and spectroelectrochemical studies revealed that the enhancement in photocatalysis is due not to differences in intrinsic properties of the catalyst or photosensitizer, but to hydrogen-bonding interactions between them.

Ruthenium Picolinate Complex as a Redox Photosensitizer With Wide-Band Absorption

Ruthenium(II) picolinate complex, [Ru(dmb)₂(pic)]⁺ (Ru(pic); dmb = 4,4′-dimethyl-2,2′-bipyridine; Hpic = picolinic acid) was newly synthesized as a potential redox photosensitizer with a wider wavelength range of visible-light absorption compared with [Ru(N^∧N)₃]²⁺ (N^∧N = diimine ligand), which is the most widely used redox photosensitizer. Based on our investigation of its photophysical and electrochemical properties, Ru(pic) was found to display certain advantageous characteristics of wide-band absorption of visible light (λ_abs < 670 nm) and stronger reduction ability in a one-electron reduced state (E1/2red = −1.86 V vs. Ag/AgNO₃), which should function favorably in photon-absorption and electron transfer to the catalyst, respectively. Performing photocatalysis using Ru(pic) as a redox photosensitizer combined with a Re(I) catalyst reduced CO₂ to CO under red-light irradiation (λ_ex > 600 nm). TON_CO reached 235 and Φ_CO was 8.0%. Under these conditions, [Ru(dmb)₃]²⁺ (Ru(dmb)) is not capable of working as a redox photosensitizer because it does not absorb light at λ > 560 nm. Even in irradiation conditions where both Ru(pic) and Ru(dmb) absorb light (λ_ex > 500 nm), using Ru(pic) demonstrated faster CO formation (TOF_CO = 6.7 min⁻¹) and larger TON_CO (2347) than Ru(dmb) (TOF_CO = 3.6 min⁻¹; TON_CO = 2100). These results indicate that Ru(pic) is a superior redox photosensitizer over a wider wavelength range of visible-light absorption.

Photocatalytic CO2 Reduction Using Various Heteroleptic Diimine-Diphosphine Cu(I) Complexes as Photosensitizers

The development of efficient redox-photosensitizers based on the earth-abundant metal ions as an alternative toward noble- and/or rare-metal based photosensitizers is very desirable. In recent years, heteroleptic diimine-diphosphine Cu(I) complexes have been well investigated as one of the most remarkable candidates because of their great potentials as efficient photosensitizers. Here, we investigated the effects of the structure of the diphosphine ligands on the photosensitizing abilities using a series of Cu(I) complexes bearing 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (dmpp) and various diphosphine ligands in order to explore the suitable structure for the photosensitizing reactions. The number of methylene chains between the two phosphorous atoms in the diphosphine ligands was systematically changed from two to four, and the relationship between the length of the carbon chains and the photosensitizing abilities were investigated by conducting photocatalytic CO₂ reduction with the Cu(I) complexes as photosensitizers. Turnover frequencies of the CO₂ reduction drastically increased with increasing the length of the carbon chains. The systematic study herein reported suggests that the large P-Cu-P angles should be one of the most important factors for enhancing the photosensitizing abilities.

Phosphine oxide-based tricarbonylrhenium(i) complexes from phosphine/phosphine oxide and dihydroxybenzoquinones

Neutral phosphine oxide (P[double bond, length as m-dash]O) donor-based organometallic complexes [{Re(CO)3O[double bond, length as m-dash]PCy3}{μ-DHBQ}{Re(CO)3O[double bond, length as m-dash]PCy3}] (1), [{Re(CO)3O[double bond, length as m-dash]PPh3}{μ-DHBQ}{Re(CO)3O[double bond, length as m-dash]PPh3}] (2), [{Re(CO)3O[double bond, length as m-dash]PCy3}{μ-THQ}{Re(CO)3O[double bond, length as m-dash]PCy3}] (3), [{Re(CO)3O[double bond, length as m-dash]PPh3}{μ-THQ}{Re(CO)3O[double bond, length as m-dash]PPh3}] (4), [{Re(CO)3O[double bond, length as m-dash]PCy3}{μ-CA}{Re(CO)3O[double bond, length as m-dash]PCy3}] (5), and [{Re(CO)3O[double bond, length as m-dash]PPh3}{μ-CA}{Re(CO)3O[double bond, length as m-dash]PPh3}] (6) were assembled from phosphine/phosphine oxide, a dihydroxybenzoquinone donor and Re2(CO)10via a one-pot solvothermal approach. The soft phosphine donor was transformed into a hard phosphine oxide donor during the formation of 1, 3, 4, 5, and 6. The complexes 1-6 were air and moisture stable and were soluble in polar organic solvents. The complexes were characterized by elemental analysis, FT-IR, and NMR spectroscopic methods. The molecular structures of 1, 2, 4, and 6 were analyzed by single-crystal X-ray diffraction analysis. The UV-Visible absorption studies indicated that 1-6 in THF display strong visible light absorption in the range of ∼350-700 nm.

Benzimidazolium Naphthoxide Betaine Is a Visible Light Promoted Organic Photoredox Catalyst

Benzimidazolium naphthoxide (^-ONap-BI⁺) was first synthesized and utilized as an unprecedented betaine photoredox catalyst. Photoexcited state of ^-ONap-BI⁺ generated by visible light irradiation catalyzes the reductive deiodination as well as desulfonylation reactions in which 1,3-dimethyl-2-phenylbenzimidazoline (Ph-BIH) cooperates with as an electron and hydrogen atom donor. Significant solvent effects on the reaction progress were discovered, and specific solvation toward imidazolium and naphthoxide moieties of ^-ONap-BI⁺ was proposed.

Molecular polypyridine-based metal complexes as catalysts for the reduction of CO2

Polypyridyl transition metal complexes represent one of the more thoroughly studied classes of molecular catalysts towards CO₂ reduction to date. Initial reports in the 1980s began with an emphasis on 2nd and 3rd row late transition metals, but more recently the focus has shifted towards earlier metals and base metals. Polypyridyl platforms have proven quite versatile and amenable to studying various parameters that govern product distribution for CO₂ reduction. However, open questions remain regarding the key mechanistic steps that govern product selectivity and efficiency. Polypyridyl complexes have also been immobilized through a variety of methods to afford active catalytic materials for CO₂ reductions. While still an emerging field, materials incorporating molecular catalysts represent a promising strategy for electrochemical and photoelectrochemical devices capable of CO₂ reduction. In general, this class of compounds remains the most promising for the continued development of molecular systems for CO₂ reduction and an inspiration for the design of related non-polypyridyl catalysts.

Synthesis of Os(ii)-Re(i)-Ru(ii) hetero-trinuclear complexes and their photophysical properties and photocatalytic abilities

Novel Os(ii)–Re(i)–Ru(ii) hetero-trinuclear complexes, which can absorb a wide range of visible light and induce durable CO₂ reduction, were synthesised.

Photofunctional trinuclear complexes containing three different central metals, i.e. Os(ii), Re(i) and Ru(ii), were synthesised for the first time using stepwise Mizoroki–Heck reactions. The vinylene groups in the bridging ligands of the Os(ii)–Re(i)–Ru(ii) trinuclear complexes were selectively reduced by photochemical hydrogenation in moderate yield, affording novel supramolecular photocatalysts which can absorb a wide range of visible light up to 730 nm and induce CO₂ reduction with high selectivity and durability. The turnover numbers of CO formation were over 4300. Details of the photophysical properties of these new trinuclear complexes, especially their intramolecular excitation-energy transfer phenomena, are also reported.

Hybrid photocathode consisting of a CuGaO2 p-type semiconductor and a Ru(ii)-Re(i) supramolecular photocatalyst: non-biased visible-light-driven CO2 reduction with water oxidation

A CuGaO2 p-type semiconductor electrode was successfully employed for constructing a new hybrid photocathode with a Ru(ii)-Re(i) supramolecular photocatalyst (RuRe/CuGaO2). The RuRe/CuGaO2 photocathode displayed photoelectrochemical activity for the conversion of CO2 to CO in an aqueous electrolyte solution with a positive onset potential of +0.3 V vs. Ag/AgCl, which is 0.4 V more positive in comparison to a previously reported hybrid photocathode that used a NiO electrode instead of CuGaO2. A photoelectrochemical cell comprising this RuRe/CuGaO2 photocathode and a CoO x /TaON photoanode enabled the visible-light-driven catalytic reduction of CO2 using water as a reductant to give CO and O2 without applying any external bias. This is the first self-driven photoelectrochemical cell constructed with the molecular photocatalyst to achieve the reduction of CO2 by only using visible light as the energy source and water as a reductant.

Product Selectivity in Homogeneous Artificial Photosynthesis Using [(bpy)Rh(Cp*)X]n+-Based Catalysts

Due to the limited amount of fossil energy carriers, the storage of solar energy in chemical bonds using artificial photosynthesis has been under intensive investigation within the last decades. As the understanding of the underlying working principle of these complex systems continuously grows, more focus will be placed on a catalyst design for highly selective product formation. Recent reports have shown that multifunctional photocatalysts can operate with high chemoselectivity, forming different catalysis products under appropriate reaction conditions. Within this context [(bpy)Rh(Cp*)X]n+-based catalysts are highly relevant examples for a detailed understanding of product selectivity in artificial photosynthesis since the identification of a number of possible reaction intermediates has already been achieved.

Trifluoroethoxy-Coated Subphthalocyanine affects Trifluoromethylation of Alkenes and Alkynes even under Low-Energy Red-Light Irradiation

Photoredox chemical reactions induced by visible light have undergone a renaissance in recent years. Polypyridyl dyes such as Ir(ppy)3 and Ru(bpy)3 are key catalysts in this event, and blue- or white-light irradiation is required for the chemical transformations. However, it remains a challenge to achieve reactions under the lower energy of red light. We disclose, herein, that trifluoroethoxy-coated subphthalocyanine realizes the red-light-driven trifluoromethylation of alkenes and alkynes with trifluoromethyl iodide in good-to-high yields. Perfluoroalkylations were also achieved under red light. The reaction mechanism is discussed with the support of UV/Vis spectroscopy and cyclic voltammetry of trifluoroethoxy-coated subphthalocyanine. Light irradiation/dark study also supports the proposed mechanism.

Photoinduced electron transfer from rylenediimide radical anions and dianions to Re(bpy)(CO)3 using red and near-infrared light

A major goal of artificial photosynthesis research is photosensitizing highly reducing metal centers using as much as possible of the solar spectrum reaching Earth's surface. The radical anions and dianions of rylenediimide (RDI) dyes, which absorb at wavelengths as long as 950 nm, are powerful photoreductants with excited state oxidation potentials that rival or exceed those of organometallic chromophores. These dyes have been previously incorporated into all-organic donor-acceptor systems, but have not yet been shown to reduce organometallic centers. This study describes a set of dyads in which perylenediimide (PDI) or naphthalenediimide (NDI) chromophores are attached to Re(bpy)(CO)₃ through either the bipyridine ligand or more directly to the Re center via a pyridine ligand. The chromophores are reduced with a mild reducing agent, after which excitation with long-wavelength red or near-infrared light leads to reduction of the Re complex. The kinetics of electron transfer from the photoexcited anions to the Re complex are monitored using transient visible/near-IR and mid-IR spectroscopy, complemented by theoretical spectroscopic assignments. The photo-driven charge shift from the reduced PDI or NDI to the complex occurs in picoseconds regardless of whether PDI or NDI is attached to the bipyridine or to the Re center, but back electron transfer is found to be three orders of magnitude slower with the chromophore attached to the Re center. These results will inform the design of future catalytic systems that incorporate RDI anions as chromophores.

Activation of the Carbon Nitride Surface by Silica in a CO-Evolving Hybrid Photocatalyst

Photocatalytic reduction of CO₂ to CO proceeded by visible light (λ>400 nm) using mesoporous graphitic carbon nitride (C₃ N₄ ) coupled with a Ru^II -Re^I binuclear complex (RuRe) containing a photosensitizer and catalytic units. The selectivity to CO exceeded 90 % during the initial stage. Photocatalytic reactions (including isotope tracer experiments) and electrochemical measurements revealed that the reaction proceeded according to a two-step photoexcitation of C₃ N₄ and the Ru^II photosensitizer unit, that is, it followed the Z-Scheme mechanism. Modification of C₃ N₄ with highly dispersed silica was found to improve the ability of C₃ N₄ to accommodate RuRe, which enhanced the photocatalytic activity for CO production.

Development of hybrid photocatalysts constructed with a metal complex and graphitic carbon nitride for visible-light-driven CO2 reduction

The research progress of metal-complex/C₃N₄ hybrid photocatalysts for CO₂ reduction made by our group is highlighted.

Ruthenium–cobalt dinuclear complexes as photocatalysts for CO2 reduction

A series of Ru–Co dinuclear complexes have been synthesized and assayed as photocatalysts for the reduction of CO₂ to CO in organic solvents.

Temperature dependence of photocatalytic CO2reduction by trans(Cl)–Ru(bpy)(CO)2Cl2: activation energy difference between CO and formate production

The temperature dependence of photocatalytic CO₂reduction bytrans(Cl)–Ru(bpy)(CO)₂Cl₂(bpy: 2,2′-bipyridine) has been researched in ethanol (EtOH)/N,N-dimethylacetamide (DMA) solutions containing [Ru(bpy)₃]²⁺(a photosensitizer) and 1-benzyl-1,4-dihydronicotinamide (BNAH, an electron donor). The catalytic system efficiently reduces CO₂to carbon monoxide (CO) with formate (HCOO⁻) as a minor product. The mechanism of the catalysis consists of the electron-relay cycle and the catalytic cycle: in the former cycle the photochemically generated reduced species of the photosensitizer injects an electron to the catalyst, and in the latter the catalyst reduces CO₂. At a low concentration of the catalyst (5.0 μM), where the catalytic cycle is rate-determining, the temperature dependence of CO/HCOO⁻is also dependent on the EtOH contents: the selectivity of CO/HCOO⁻decreases in 20% and 40%-EtOH/DMA with increasing temperature, while it increases in 60%-EtOH/DMA. The temperature dependence of the CO/HCOO⁻selectivity indicates that the difference in activation energy (ΔΔG^‡) between CO and HCOO⁻production is estimated asca.3.06 kJ mol⁻¹in 40%-EtOH/DMA at 298 K.

Fe, Ru, and Os complexes with the same molecular framework: comparison of structures, properties and catalytic activities

A series of group 8 metal complexes with the same molecular framework, [M(PY5Me2)L]n+ (M = Fe, Ru, and Os; PY5Me₂ = 2,6-bis[1,1-bis(2-pyridyl)ethyl]pyridine; L = monodentate ligand), were successfully synthesized and structurally characterized. The spectroscopic and electrochemical properties as well as the catalytic activity for water oxidation of these complexes were investigated.