Uranium(VI) Chemistry in Strong Alkaline Solution: Speciation and Oxygen Exchange Mechanism

Nature and coordination geometry of geologically relevant aqueous Uranium(VI) complexes up to 400 ºC: A review and new data

The structure of the uranyl aqua ion (UO₂²⁺) and a number of its inorganic complexes (specifically, UO₂Cl⁺, UO₂Cl₂⁰, UO₂SO₄⁰, [Formula: see text] , [Formula: see text] and UO₂OH₄^2-) have been characterised using X-Ray absorption spectroscopy/extended X-Ray absorption fine structure (XAS/EXAFS) at temperatures ranging from 25 to 326 ºC. Results of ab initio molecular dynamics (MD) calculations are also reported for uranyl in chloride and sulfate-bearing fluids from 25 to 400 ºC and 600 bar to 20 kilobar (kb). These results are reported alongside a comprehensive review of prior structural characterisation work with particular focus given to EXAFS works to provide a consistent and up-to-date view of the structure of these complexes under conditions relevant to U mobility in ore-forming systems and around high-grade nuclear waste repositories. Regarding reported EXAFS results, average equatorial coordination was found to decrease in uranyl and its sulfate and chloride complexes as temperature rose - the extent of this decrease differed between species and solution compositions but typically resulted in an equatorial coordination number of ∼3-4 at temperatures above 200 ºC. The [Formula: see text] complex was observed at temperatures from 25 to 247 ºC and exhibited no major structural changes over this temperature range. UO₂OH₄^2- exhibited only minor structural changes over a temperature range from 88 to 326 ºC and was suggested to manifest fivefold coordination with four hydroxyl molecules and one water molecule around its equator. Average coordination values derived from fits of the reported EXAFS data were compared to average coordination values calculated using the experimentally derived thermodynamic data for chloride complexes reported by Dargent et al. (2013) and Migdisov et al. (2018b), and for sulfate complexes reported by Alcorn et al. (2019) and Kalintsev et al. (2019). Sulfate EXAFS data were well described by available thermodynamic data, and chloride EXAFS data were described well by the thermodynamic data of Migdisov et al. (2018b), but not by the data of Dargent et al. (2013). The ab initio molecular dynamics calculations confirmed the trends in equatorial coordination observed with EXAFS and were also able to provide an insight into the effect of pressure in equatorial water coordination - for a given temperature, higher pressures appear to lead to a greater number of equatorially bound waters counteracting the temperature effect.

The effects of pH on U(VI)/Th(IV) and Ra(II)/Ba(II) adsorption by polystyrene-nano manganese dioxide composites: Fourier Transform Infra-Red spectroscopic analysis

Fourier Transform Infra-Red (FTIR) spectroscopy provides structural information of prime importance to understand ions coordination to adsorbents. This consequently aids in the design of improved ion exchange materials and help in deriving the optimum adsorption conditions. In the present work, the adsorption mechanism of both U(VI)/Th(IV) and Ra(II)/Ba(II) radionuclides couples onto polystyrene-nano manganese dioxide (PS-NMO) composite is reported in relation to the effect of working solution pH. The separation of each radionuclide couple; i.e. U(VI)/Th(IV) and Ra(II)/Ba(II); could be effectively achieved at pH = 3 and pH = 1 respectively. The pH values not only determine the species of the respected elements that are mainly present in aqueous solution before applying the adsorbent, but it also alters the structure of the composite adsorbent. FTIR spectroscopy showed that Th(IV) formed inner sphere complexes and occupied the A site in the dioxide layer, while U(VI) formed outer sphere complexes on the surface of the composite. Spectra subtraction showed that some aromatic bands and vinyl C-H bands were split or shifted to lower wavenumbers with the loading of Ba(II). This was attributed to changes in the composite stereochemistry to accommodate Ba(II). The working solution pH could be the key in the separation process of both U(VI)/Th(IV) and Ra(II)/Ba(II) from their mixture, and FTIR spectroscopy stands as a useful technique to explain the difference between metal ions responses to adsorbants.

New uranium(vi) and isothiouronium complexes: synthesis, crystal structure, spectroscopic characterization and a DFT study

U(vi) and isothiouronium salts create a strong charge-assisted network of hydrogen bonds and ionic interactions.

Abiotic reduction of uranium(VI) with humic acid at mineral surfaces: Competing mechanisms, ligand and substituent effects, and electronic structure and vibrational properties

Abiotic reduction represents an attractive technology to control U(VI) contamination. In this work, an abiotic route of U(VI) reduction with humic acid at mineral surfaces is proposed and reaction mechanisms are addressed by periodic density functional theory calculations. Different influencing factors such as ligand effect, content of CO₃^2- ligands and substituent effect are inspected. The coordination chemistry of uranyl(VI) surface complexes relies strongly on substrates and ligands, and the calculated results are in good agreements with experimental observations available. For the OH^- ligand, two competitive mechanisms co-exist that respectively produce the U(IV) and U(V) species, and the former is significantly preferred because of lower energy barriers. Instead, the NO₃^- ligand leads to the formation of U(V) while for the Cl^- ligand, the U(VI) surface complex remains very stable and is not likely to be reduced because of very high energy barriers. The U(V) and U(IV) complexes are the predominant products for low and high CO₃^2- contents, respectively. Accordingly, the abiotic reduction processes with humic acid are efficient to manage U(VI) contamination and become preferred under basic conditions or at higher CO₃^2- contents. The U(VI) reduction is further promoted by introduction of electron-donating rather than electron-withdrawing substituents to humic acid. Electronic structure analyses and vibrational frequency assignments are calculated for the various uranium surface complexes of the reduction processes, serving as a guide for future experimental and engineered studies. The molecular-level understanding given in this work offers an abiotic route for efficient reduction of U(VI) and remediation of U(VI)-contaminated sites at ambient conditions.

U(VI) sorption on Ca-bentonite at (hyper)alkaline conditions - Spectroscopic investigations of retention mechanisms

Environmental conditions in deep geological repositories for radioactive waste may involve high pH values due to the degradation of concrete. However, the U(VI) sorption at such (hyper)alkaline conditions is still poorly understood. In this study, batch sorption experiments with Ca-bentonite in the pH range 8-13 at different carbonate concentrations were combined with spectroscopic investigations in order to gain insight into the underlying retention mechanisms. It was found that U(VI) sorption strongly correlates with the aqueous U(VI) speciation determined by time-resolved laser-induced luminescence spectroscopy (TRLFS). Increasing retention with increasing pH was accompanied by a change in aqueous speciation from uranyl carbonates to uranyl hydroxides. The occurrence of luminescence line-narrowing and a decreased frequency of the symmetric stretch vibration, deduced from site-selective TRLFS, indicate the presence of adsorbed U(VI) surface complexes. X-ray absorption fine structure (EXAFS) spectroscopy confirms that surface precipitation does not contribute significantly to the removal of U(VI) from solution but that retention occurs through the formation of two non-equivalent U(VI)-complexes on the bentonite surface. The present study demonstrates that in alkaline environments, where often only precipitation processes are considered, adsorption can provide effective retention of U(VI), despite the anionic character of prevailing aqueous species.

Interdisciplinary Round-Robin Test on Molecular Spectroscopy of the U(VI) Acetate System

A comprehensive molecular analysis of a simple aqueous complexing system-U(VI) acetate-selected to be independently investigated by various spectroscopic (vibrational, luminescence, X-ray absorption, and nuclear magnetic resonance spectroscopy) and quantum chemical methods was achieved by an international round-robin test (RRT). Twenty laboratories from six different countries with a focus on actinide or geochemical research participated and contributed to this scientific endeavor. The outcomes of this RRT were considered on two levels of complexity: first, within each technical discipline, conformities as well as discrepancies of the results and their sources were evaluated. The raw data from the different experimental approaches were found to be generally consistent. In particular, for complex setups such as accelerator-based X-ray absorption spectroscopy, the agreement between the raw data was high. By contrast, luminescence spectroscopic data turned out to be strongly related to the chosen acquisition parameters. Second, the potentials and limitations of coupling various spectroscopic and theoretical approaches for the comprehensive study of actinide molecular complexes were assessed. Previous spectroscopic data from the literature were revised and the benchmark data on the U(VI) acetate system provided an unambiguous molecular interpretation based on the correlation of spectroscopic and theoretical results. The multimethodologic approach and the conclusions drawn address not only important aspects of actinide spectroscopy but particularly general aspects of modern molecular analytical chemistry.

A novel nanocomposite of Liquidambar styraciflua fruit biochar-crosslinked-nanosilica for uranyl removal from water

Biochar adsorption has been protruded as a sustainable green and economic process for water remediation. This technology is facing high challenges in removing different pollutants, owning to the stable chemical and physical features of biochar. Therefore, a novel nanocomposite of Liquidambar styraciflua fruit biochar-crosslinked-nanosilica (BC-Gl-NSi) was synthesized and characterized (surface area = 60.754 m² g^-1 and particle size = 17.32-36.25 nm). The designed BC-Gl-NSi nanocomposite was explored for removal of uranyl ions by the batch adsorption technique under the influence of different factors including temperature, contact time, nanocomposite dosage, pH, uranyl ion concentration as well as co-existing ions. The adsorption process was principally confirmed to rely on the solution pH and reached 86.3% in pH 4.0. The results showed also that one-minute contact duration was sufficient to reach the maximum extraction of uranyl (30.0 mg L^-1). Besides, [BC-Gl-NSi] exhibited excellent selectivity and good recovery of uranyl ions with other competing ions.

Dissolution of studtite [UO2(O2)(H2O)4] in various geochemical conditions

This study determined the dissolution rate of studtite, (UO₂)O₂(H₂O)₄, which can be formed by reaction between H₂O₂ and UO₂²⁺ that leaks from spent nuclear fuel (SNF) in deep geological repositories. The batch dissolution experiments were conducted using synthesized studtite under different solution conditions with varying pHs and concentrations of HCO₃^- and [H₂O₂] in synthetic groundwater. The experimental results suggested that carbonate ligand and H₂O₂ in groundwater accelerated the dissolution of studtite and uranium (U) release. Above 10^-5 M of H₂O₂ initial concentration, the released uranium concentration in solution decreased, possibly as a result of reprecipitation of studtite due to reaction between uranium and H₂O₂. The results will be useful to assess the comprehensive transport of uranium from both nuclear waste and SNF stored in deep geological repositories.

A DFT study of uranyl hydroxyl complexes: structure and stability of trimers and tetramers

A DFT study of U(VI) hydroxy complexes was performed with special attention paid to the [(UO₂)₃(OH)₅(H₂O)_4–7]⁺ and [(UO₂)₄(OH)₇(H₂O)_5–8]⁺ species. It was established that the ionicity of the U=O bond increased when moving from [(UO₂)(H₂O)₅]²⁺, [(UO₂)₂(OH)(H₂O)₈]³⁺, [(UO₂)₂(OH)₂(H₂O)₆]²⁺, [(UO₂)₃(OH)₅(H₂O)_4–6]⁺ to [(UO₂)₄(OH)₇(H₂O)_5–8]⁺ species. In both [(UO₂)₃(OH)₅(H₂O)_4–6]⁺ and [(UO₂)₄(OH)₇(H₂O)_5–8]⁺ complexes, the U=O bond was observed to have a range of different lengths which depended on the composition of the first coordination sphere of UO₂²⁺. The cyclic structures of trimeric complexes were somewhat more stable than their linear structures, which was probably due to the steric effect.

Density functional theory investigations on the binding modes of amidoximes with uranyl ions

η¹-O of tautomerized amidoximes and η¹-O/η²-N–O of anionic amidoximes are all plausible coordination modes for amidoximes in ligating uranyl ions.

Theoretical study on complexation of U(vi) with ODA, IDA and TDA based on density functional theory

Precise structures of U(vi) complexes with ODA, IDA and TDA in different binding modes.

Theoretical investigation on the mechanism and dynamics of oxo exchange of neptunyl(VI) hydroxide in aqueous solution

Four types of reaction mechanisms for the oxo ligand exchange of monomeric and dimeric neptunyl(VI) hydroxide in aqueous solution were explored computationally using density functional theory (DFT) and ab initio classical molecular dynamics. The obtained results were compared with previous studies on the oxo exchange of uranyl hydroxide, as well as with experiments. It is found that the stable T-shaped [NpO3(OH)3](3-) intermediate is a key species for oxo exchange in the proton transfer in mononuclear Path I and binuclear Path IV, similar to the case of uranyl(VI) hydroxide. Path I is thought to be the preferred oxo exchange mechanism for neptunyl(VI) hydroxide in our calculations, due to the lower activation energy (22.7 and 13.1 kcal mol(-1) for ΔG(‡) and ΔH(‡), respectively) of the overall reaction. Path II via a cis-neptunyl structure assisted by a water molecule might be a competitive channel against Path I with a mononuclear mechanism, owing to a rapid dynamical process occurring in Path II. In Path IV with the binuclear mechanism, oxo exchange is accomplished via the interaction between [NpO2(OH)4](2-) and T-shaped [NpO3(OH)3](3-) with a low activation energy for the rate-determining step, however, the overall energy required to fulfill the reaction is slightly higher than that in mononuclear Path I, suggesting a possible binuclear process in the higher energy region. The chemical bonding evolution along the reaction pathways was discussed by using topological methodologies of the electron localization function (ELF).

Combining luminescence spectroscopy, parallel factor analysis and quantum chemistry to reveal metal speciation - a case study of uranyl(vi) hydrolysis

This study of aqueous metal speciation is an advanced combination of theoretical and experimental methods. Continuous wave (CW) and time-resolved laser-induced fluorescence spectroscopy (TRLFS) data of uranyl(vi) hydrolysis were analyzed using parallel factor analysis (PARAFAC). Distribution patterns of five major species were thereby derived under a fixed uranyl concentration (10-5 M) over a wide pH range from 2 to 11. UV (180 nm to 370 nm) excitation spectra were extracted for individual species. Time-dependent density functional theory (TD-DFT) calculations revealed ligand excitation (water, hydroxo, oxo) in this region and ligand-to-metal charge transfer (LMCT) responsible for luminescence. Thus excitation in the UV region is extreme ligand sensitive and specific. Combining findings from PARAFAC and DFT the [UO2(H2O)5]2+ cation (aquo complex 1 : 0) and four hydroxo complexes (1 : 1, 3 : 5, 3 : 7 and 1 : 3) were identified. The methodological concept used here is applicable to luminescent metals in general and thus enables acquisition of refined structural and thermodynamical data of lanthanide and actinide complexation.

Promising density functional theory methods for predicting the structures of uranyl complexes

By examining the overall accuracy of different theoretical methods in predicting the U–X bond distances (of a series uranyl complexes), we found that both the global-hybrid meta-GGA functional of BB1K and the range-seperated LC-BLYP functional are fairly good (even better than the popular B3LYP method).