Influence of Calcium(II) and Chloride on the Oxidative Reactivity of a Manganese(II) Complex of a Cross-Bridged Cyclen Ligand

Redox Processes Involving Oxygen: The Surprising Influence of Redox-Inactive Lewis Acids

Metalloenzymes with heteromultimetallic active sites perform chemical reactions that control several biogeochemical cycles. Transformations catalyzed by such enzymes include dioxygen generation and reduction, dinitrogen reduction, and carbon dioxide reduction-instrumental transformations for progress in the context of artificial photosynthesis and sustainable fertilizer production. While the roles of the respective metals are of interest in all these enzymatic transformations, they share a common factor in the transfer of one or multiple redox equivalents. In light of this feature, it is surprising to find that incorporation of redox-inactive metals into the active site of such an enzyme is critical to its function. To illustrate, the presence of a redox-inactive Ca2+ center is crucial in the Oxygen Evolving Complex, and yet particularly intriguing given that the transformation catalyzed by this cluster is a redox process involving four electrons. Therefore, the effects of redox inactive metals on redox processes-electron transfer, oxygen- and hydrogen-atom transfer, and O-O bond cleavage and formation reactions-mediated by transition metals have been studied extensively. Significant effects of redox inactive metals have been observed on these redox transformations; linear free energy correlations between Lewis acidity and the redox properties of synthetic model complexes are observed for several reactions. In this Perspective, these effects and their relevance to multielectron processes will be discussed.

Catalytic oxidation properties of an acid-resistant cross-bridged cyclen Fe(II) complex. Influence of the rigid donor backbone and protonation on the reactivity

The catalytic properties of an iron complex bearing a pentadentate cross-bridged ligand backbone are reported. With H₂O₂ as an oxidant, it displays moderate conversions in epoxidation and alkane hydroxylation and satisfactory ones in aromatic hydroxylation. Upon addition of an acid to the reaction medium, a significant enhancement in aromatic and alkene oxidation is observed. Spectroscopic analyses showed that accumulation of the expected Fe^III(OOH) intermediate is limited under these conditions, unless an acid is added to the mixture. This is ascribed to the inertness induced by the cross-bridged ligand backbone, which is partly reduced under acidic conditions.

Synthesis and Characterization of Late Transition Metal Complexes of Mono-Acetate Pendant Armed Ethylene Cross-Bridged Tetraazamacrocycles with Promise as Oxidation Catalysts for Dye Bleaching

Ethylene cross-bridged tetraazamacrocycles are known to produce kinetically stable transition metal complexes that can act as robust oxidation catalysts under harsh aqueous conditions. We have synthesized ligand analogs with single acetate pendant arms that act as pentadentate ligands to Mn, Fe, Co, Ni, Cu, and Zn. These complexes have been synthesized and characterized, including the structural characterization of four Co and Cu complexes. Cyclic voltammetry demonstrates that multiple oxidation states are stabilized by these rigid, bicyclic ligands. Yet, redox potentials of the metal complexes are modified compared to the "parent" ligands due to the pendant acetate arm. Similarly, gains in kinetic stability under harsh acidic conditions, compared to parent complexes without the pendant acetate arm, were demonstrated by a half-life seven times longer for the cyclam copper complex. Due to the reversible, high oxidation states available for the Mn and Fe complexes, the Mn and Fe complexes were examined as catalysts for the bleaching of three commonly used pollutant model dyes (methylene blue, methyl orange, and Rhodamine B) in water with hydrogen peroxide as oxidant. The efficient bleaching of these dyes was observed.

A Contrasting Effect of Acid in Electron Transfer, Oxygen Atom Transfer, and Hydrogen Atom Transfer Reactions of a Nickel(III) Complex

There have been many examples of the accelerating effects of acids in electron transfer (ET), oxygen atom transfer (OAT), and hydrogen atom transfer (HAT) reactions. Herein, we report a contrasting effect of acids in the ET, OAT, and HAT reactions of a nickel(III) complex, [Ni^III(PaPy₃*)]²⁺ (1) in acetone/CH₃CN (v/v 19:1). 1 was synthesized by reacting [Ni^II(PaPy₃*)]⁺ (2) with magic blue or iodosylbenzene in the absence or presence of triflic acid (HOTf), respectively. Sulfoxidation of thioanisole by 1 and H₂O occurred in the presence of HOTf, and the reaction rate increased proportionally with increasing concentration of HOTf ([HOTf]). The rate of ET from diacetylferrocene to 1 also increased linearly with increasing [HOTf]. In contrast, HAT from 9,10-dihydroanthracene (DHA) to 1 slowed down with increasing [HOTf], exhibiting an inversely proportional relation to [HOTf]. The accelerating effect of HOTf in the ET and OAT reactions was ascribed to the binding of H⁺ to the PaPy₃* ligand of 2; the one-electron reduction potential (E_red) of 1 was positively shifted with increasing [HOTf]. Such a positive shift in the E_red value resulted in accelerating the ET and OAT reactions that proceeded via the rate-determining ET step. On the other hand, the decelerating effect of HOTf on HAT from DHA to 1 resulted from the inhibition of proton transfer from DHA^•+ to 2 due to the binding of H⁺ to the PaPy₃* ligand of 2. The ET reactions of 1 in the absence and presence of HOTf were well analyzed in light of the Marcus theory of ET in comparison with the HAT reactions.

Expanding and quantifying the crystal chemistry of the flexible ligand 15aneN5

15aneN5 is structurally characterized complexed to Cr3+, Mn3+, Fe3+, Co3+, and Cu2+ for the first time. Ru3+ complexation yields a Ru2+ diimine structure. A geometric factor quantifies the coordination geometry of the ligand in its complexes.

Deeper Understanding of Mononuclear Manganese(IV)-Oxo Binding Brønsted and Lewis Acids and the Manganese(IV)-Hydroxide Complex

Binding of Lewis acidic metal ions and Brønsted acid at the metal-oxo group of high-valent metal-oxo complexes enhances their reactivities significantly in oxidation reactions. However, such a binding of Lewis acids and proton at the metal-oxo group has been questioned in several cases and remains to be clarified. Herein, we report the synthesis, characterization, and reactivity studies of a mononuclear manganese(IV)-oxo complex binding triflic acid, {[(dpaq)Mn^IV(O)]-HOTf}⁺ (1-HOTf). First, 1-HOTf was synthesized and characterized using various spectroscopic techniques, including resonance Raman (rRaman) and X-ray absorption spectroscopy/extended X-ray absorption fine structure. In particular, in rRaman experiments, we observed a linear correlation between the Mn-O stretching frequencies of 1-HOTf (e.g., ν_Mn-O at ∼793 cm^-1) and 1-Mⁿ⁺ (Mⁿ⁺ = Ca²⁺, Zn²⁺, Lu³⁺, Al³⁺, or Sc³⁺) and the Lewis acidities of H⁺ and Mⁿ⁺ ions, suggesting that H⁺ and Mⁿ⁺ bind at the metal-oxo moiety of [(dpaq)Mn^IV(O)]⁺. Interestingly, a single-crystal structure of 1-HOTf was obtained by X-ray diffraction analysis, but the structure was not an expected Mn(IV)-oxo complex but a Mn(IV)-hydroxide complex, [(dpaq)Mn^IV(OH)](OTf)₂ (4), with a Mn-O bond distance of 1.8043(19) Å and a Mn-O stretch at 660 cm^-1. More interestingly, 4 reverted to 1-HOTf upon dissolution, demonstrating that 1-HOTf and 4 are interconvertible depending on the physical states, such as 1-HOTf in solution and 4 in isolated solid. The reactivity of 1-HOTf was investigated in hydrogen atom transfer (HAT) and oxygen atom transfer (OAT) reactions and then compared with those of 1-Mⁿ⁺ complexes; an interesting correlation between the Mn-O stretching frequencies of 1-HOTf and 1-Mⁿ⁺ and their reactivities in the OAT and HAT reactions is reported for the first time in this study.

An ethylene cross-bridged pentaazamacrocycle and its Cu2+ complex: constrained ligand topology and excellent kinetic stability

Rigid and topologically constrained ethylene cross-bridged tetraazamacrocycles have been increasingly utilised for thirty years as they form remarkably stable transition metal complexes for catalysis, biomedical imaging, and inorganic drug molecule applications. Extending these benefits to pentaazamacrocycles has been achieved and a first transition metal complex prepared and structurally characterized.

The effects of nonredox metal ions on the activation of peroxymonosulfate for organic pollutants degradation in aqueous solution with cobalt based catalysts: A new mechanism investigation

Herein, a new peroxymonosulfate (PMS) activation system was proposed employing nonredox metal ions as Lewis acids (LA), which have been widely recognized to play important roles in many biological and chemical oxidations. With Co²⁺ ions as model catalysts, it was found that oxidizing power of PMS was enhanced after binding weak LA such as Ca²⁺ ions, leading to its easier reduction to active radicals and substantial enhancement of dye degradation. The promoting effect of Ca²⁺ was also observed with other cobalt catalysts including CoFe₂O₄ and Co₃O₄. The rate of PMS decomposition in Co²⁺+LA/PMS system was correlated with Lewis acidity; while in the presence of strong LA including La³⁺ and Y³⁺, the dye degradation rate declined. The interactions of LA with PMS were characterized and the detailed mechanism was proposed. The present study provides the first example of the promoting effect of weak LA on PMS activation with cobalt based catalysts.

Lewis acids promoted organic pollutants degradation in aqueous solution with peroxymonosulfate and MnO2: New insights into the activation mechanism

Nonredox metal ions have been widely recognized to be important in a wide range of biological and chemical oxidations as Lewis acids (LA). However, the role of LA in peroxymonosulfate (PMS) activation for wastewater treatment has not been considered until now. This study shows that oxidizing power of PMS can be promoted after binding nonredox metal ions such as Ca²⁺ as LA, leading to the easier reduction of the oxidant to radicals and substantial enhancement of dye degradation by employing manganese oxides OMS-2 as model catalysts. Increased with Lewis acidity of the metal ion, the rate of PMS decomposition enhanced linearly, while the dye degradation rate first increased and then declined due to the formation of a larger amount of dioxygen. The interactions between Ca²⁺ and PMS were further investigated by Raman, cyclic voltammetry and XPS; and the detailed mechanism of PMS activation was proposed. The performance of Ca²⁺+OMS-2/PMS system under different conditions was also studied. The findings indicate the importance of LA in PMS activation reaction and their role must be considered in other transition metal oxides/PMS systems. It will be also helpful to design new and highly active catalysts for the reactions.

Lewis versus Brønsted Acid Activation of a Mn(IV) Catalyst for Alkene Oxidation

Lewis acid (LA) activation by coordination to metal oxido species has emerged as a new strategy in catalytic oxidations. Despite the many reports of enhancement of performance in oxidation catalysis, direct evidence for LA-catalyst interactions under catalytically relevant conditions is lacking. Here, we show, using the oxidation of alkenes with H₂O₂ and the catalyst [Mn₂(μ-O)₃(tmtacn)₂](PF₆)₂ (1), that Lewis acids commonly used to enhance catalytic activity, e.g., Sc(OTf)₃, in fact undergo hydrolysis with adventitious water to release a strong Brønsted acid. The formation of Brønsted acids in situ is demonstrated using a combination of resonance Raman, UV/vis absorption spectroscopy, cyclic voltammetry, isotope labeling, and DFT calculations. The involvement of Brønsted acids in LA enhanced systems shown here holds implications for the conclusions reached in regard to the relevance of direct LA-metal oxido interactions under catalytic conditions.

Lewis acid activation of oxidation catalysts is proposed to be through binding of the Lewis acids to metal-oxo species. The activity of the catalyst [Mn₂(μ-O)₃(tmtacn)₂](PF₆)₂ in the oxidation of alkenes with H₂O₂ appears to correlate with the strength of the Lewis acid used for its activation. We show that the correlation arises from the relative propensity of the Lewis acids to generate Brønsted acids in situ.

Acetate as a model for aspartate-based CXCR4 chemokine receptor binding of cobalt and nickel complexes of cross-bridged tetraazamacrocycles

A number of disease states including WHIM syndrome, HIV infection and cancer have been linked to the chemokine receptor CXCR4. High-affinity CXCR4 antagonist transition metal complexes of configurationally restricted bis-tetraazamacrocyclic ligands have been identified in previous studies. Recently synthesised and structurally characterised Co2+/Co3+ and Ni2+ acetate complexes of mono-macrocycle cross-bridged ligands have been used to mimic their known coordination interaction with the aspartate side chains on binding to CXCR4. Here, X-ray crystal structures for three Co2+/Co3+ acetate complexes and five Ni2+ acetate complexes are presented and demonstrate flexibility in the mode of binding to the acetate ligand concomitantly with the requisite cis-V-configured cross-bridged tetraazamacrocyle. Complexes of the smaller Co3+ metal ion exclusively bind acetate by chelating both oxygens of acetate. Larger Co2+ and Ni2+ metal ions in cross-bridged tetraazamacrocycles show a clear tendency to coordinate acetate in a monodentate fashion with a coordinated water molecule completing the octahedral coordination sphere. However, in unbridged tetraazamacrocycle acetate structures reported in the literature, the coordination preference is to chelate both acetate oxygens. We conclude that the short ethylene cross-bridge restricts the equatorial bulk of the macrocycle, prompting the metal ion to fill the equator with the larger monodentate acetate plus water ligand set. In unbridged ligand examples, the flexible macrocycle expands equatorially and generally only allows chelation of the sterically smaller acetate alone. These results provide insight for generation of optimised bis-macrocyclic CXCR4 antagonists utilising cobalt and nickel ions.

Effects of Lewis Acidic Metal Ions (M) on Oxygen-Atom Transfer Reactivity of Heterometallic Mn3MO4 Cubane and Fe3MO(OH) and Mn3MO(OH) Clusters

The modulation of the reactivity of metal oxo species by redox inactive metals has attracted much interest due to the observation of redox inactive metal effects on processes involving electron transfer both in nature (the oxygen-evolving complex of Photosystem II) and in heterogeneous catalysis (mixed-metal oxides). Studies of small-molecule models of these systems have revealed numerous instances of effects of redox inactive metals on electron- and group-transfer reactivity. However, the heterometallic species directly involved in these transformations have rarely been structurally characterized and are often generated in situ. We have previously reported the preparation and structural characterization of multiple series of heterometallic clusters based on Mn₃ and Fe₃ cores and described the effects of Lewis acidity of the heterometal incorporated in these complexes on cluster reduction potential. To determine the effects of Lewis acidity of redox inactive metals on group transfer reactivity in structurally well-defined complexes, we studied [Mn₃MO₄], [Mn₃MO(OH)], and [Fe₃MO(OH)] clusters in oxygen atom transfer (OAT) reactions with phosphine substrates. The qualitative rate of OAT correlates with the Lewis acidity of the redox inactive metal, confirming that Lewis acidic metal centers can affect the chemical reactivity of metal oxo species by modulating cluster electronics.

Covalent linkage of [Mn2(μ-O2PPh2)2] units by trans-1,4-bis(4-pyridyl)ethene ligands into one-dimensional and two-dimensional polymers

Two coordination polymers, [Mn2(μ-O2PPh2)2(η 1-O2PPh2)2(η 1-HOCH3)2(μ-bpe)2·CH3OH] n (1) and [Mn2(μ-O2PPh2)4(μ-bpe)2] n (2), were assembled in single-pot reactions from [Mn(CH3COO)2·4H2O], Ph2P(O)OK and trans-1,4-bis(4-pyridyl)ethene (bpe). The products were characterized by single-crystal X-ray diffraction, which revealed a one-dimensional metal-organic ladder type in 1 and a two-dimensional rectangular grid type in 2. Both 1 and 2 are constructed from six-coordinate Mn(II) nodes that adopt distorted octahedral (MnN4O2) environments; the adjacent nodes are connected by the μ-bpe linkers in 1 or μ-bpe and μ-O2PPh2 linkers in 2 to form different metal-organic networks. The catalytic property of complex 1 for selective thioether oxidation was also investigated in this work.

Incorporation of redox-inactive cations promotes iron catalyzed aerobic C-H oxidation at mild potentials

The synthesis and characterization of the Schiff base complexes Fe(ii) (2M) and Fe(iii)Cl (3M), where M is a K+ or Ba2+ ion incorporated into the ligand, are reported. The Fe(iii/ii) redox potentials are positively shifted by 440 mV (2K) and 640 mV (2Ba) compared to Fe(salen) (salen = N,N'-bis(salicylidene)ethylenediamine), and by 70 mV (3K) and 230 mV (3Ba) compared to Fe(Cl)(salen), which is likely due to an electrostatic effect (electric field) from the cation. The catalytic activity of 3M towards the aerobic oxidation of allylic C-H bonds was explored. Prior studies on iron salen complexes modified through conventional electron-donating or withdrawing substituents found that only the most oxidizing derivatives were competent catalysts. In contrast, the 3M complexes, which are significantly less oxidizing, are both active. Mechanistic studies comparing 3M to Fe(salen) derivatives indicate that the proximal cation contributes to the overall reactivity in the rate determining step. The cationic charge also inhibits oxidative deactivation through formation of the corresponding Fe2-μ-oxo complexes, which were isolated and characterized. This study demonstrates how non-redox active Lewis acidic cations in the secondary coordination sphere can be used to modify redox catalysts in order to operate at milder potentials with a minimal impact on the reactivity, an effect that was unattainable by tuning the catalyst through traditional substituent effects on the ligand.

The mechanism and efficiency of MnO2 activated persulfate process coupled with electrolysis

Pure three-dimensional manganese oxides (MnO₂) were successfully synthesized by a simple one-step hydrothermal process. The obtained particles were characterized via XRD, BET, SEM, XPS and FTIR techniques. To enhance the efficiency of heterogeneous catalytic process, a facile and effective electrochemical method was introduced. The degradation of C. I. Acid Orange 7 (AO7) as the target pollutant in aqueous solution by an oxidation system involving MnO₂ activated peroxydisulfate (PDS) coupled with electrochemical method is reported herein. Influences of some key reaction parameters such as initial pH (pH₀), current density, initial AO7 concentration, dosage of MnO₂ and anions (Cl^-, NO₃^-, HCO₃^- and H₂PO₄^-) were investigated. The cyclic voltammetry (CV) was performed to investigate the charge transfer process occurred at the surface of catalyst. LC-MS/MS analysis was applied to identify degradation intermediates and a plausible degradation mechanism is proposed accordingly. Activated sludge inhibition tests were carried out to evaluate the change of toxicity of the dye solution in the oxidation process. The inorganic by-products such as NO₂^-, NO₃^-, and NH₄⁺ along with AO7 degradation were also identified. The stability of MnO₂ catalyst was evaluated by recycling experiments and the electrical energy consumption was also investigated. Radical quenching tests with several scavengers (methanol, tert-butyl alcohol, 1,4-benzoquinone and phenol) were performed to clarify the dominating reactive species participating in this oxidation process and the underlying mechanisms involving the generation of radical from the proposed electro-assisted heterogeneous activated PDS system were identified.

Design of porphyrin-based ligands for the assembly of [d-block metal : calcium] bimetallic centers

A secondary binding-site for alkaline-earth cations is introduced on a porphyrin platform to obtain competent bitopicN,O-ligands.

Chloride: essential micronutrient and multifunctional beneficial ion

Cl− is an essential micronutrient for oxygenic photolithotrophs. About half of global primary productivity is carried out by oxygenic photolithotrophs exposed to saline waters with Cl− concentrations orders of magnitude higher than that needed to satisfy the micronutrient requirement. The other half of primary productivity involves terrestrial and freshwater glycophytes sometimes in environments containing significantly more Cl− than is needed for the micronutrient requirement, but less than the toxic Cl– concentration for glycophytes. Intracellular Cl− acts in regulation of cell turgor and volume, including that of stomatal and pulvinar nastic movements, is a major ion in streptophyte and ulvophycean action potentials, and is involved in ion currents flowing around apices of pollen tubes and Acetabularia cells. More work is needed on the essentiality of Cl− in these processes, as well as the recent finding that Cl− at 1–5 mol m−3 increases water use efficiency of growth and leaf area in Nicotiana tabacum.

Synergistic oxygen atom transfer by ruthenium complexes with non-redox metal ions

Non-redox metal ions can affect the reactivity of active redox metal ions in versatile biological and heterogeneous oxidation processes; however, the intrinsic roles of these non-redox ions still remain elusive. This work demonstrates the first example of the use of non-redox metal ions as Lewis acids to sharply improve the catalytic oxygen atom transfer efficiency of a ruthenium complex bearing the classic 2,2'-bipyridine ligand. In the absence of Lewis acid, the oxidation of ruthenium(ii) complex by PhI(OAc)2 generates the Ru(iv)[double bond, length as m-dash]O species, which is very sluggish for olefin epoxidation. When Ru(bpy)2Cl2 was tested as a catalyst alone, only 21.2% of cyclooctene was converted, and the yield of 1,2-epoxycyclooctane was only 6.7%. As evidenced by electronic absorption spectra and EPR studies, both the oxidation of Ru(ii) by PhI(OAc)2 and the reduction of Ru(iv)[double bond, length as m-dash]O by olefin are kinetically slow. However, adding non-redox metal ions such as Al(iii) can sharply improve the oxygen transfer efficiency of the catalyst to 100% conversion with 89.9% yield of epoxide under identical conditions. Through various spectroscopic characterizations, an adduct of Ru(iv)[double bond, length as m-dash]O with Al(iii), Ru(iv)[double bond, length as m-dash]O/Al(iii), was proposed to serve as the active species for epoxidation, which in turn generated a Ru(iii)-O-Ru(iii) dimer as the reduced form. In particular, both the oxygen transfer from Ru(iv)[double bond, length as m-dash]O/Al(iii) to olefin and the oxidation of Ru(iii)-O-Ru(iii) back to the active Ru(iv)[double bond, length as m-dash]O/Al(iii) species in the catalytic cycle can be remarkably accelerated by adding a non-redox metal, such as Al(iii). These results have important implications for the role played by non-redox metal ions in catalytic oxidation at redox metal centers as well as for the understanding of the redox mechanism of ruthenium catalysts in the oxygen atom transfer reaction.

Redox inactive metal ion triggered N-dealkylation by an iron catalyst with dioxygen activation: a lesson from lipoxygenases

Utilization of dioxygen as the terminal oxidant at ambient temperature is always a challenge in redox chemistry, because it is hard to oxidize a stable redox metal ion like iron(III) to its high oxidation state to initialize the catalytic cycle. Inspired by the dioxygenation and co-oxidase activity of lipoxygenases, herein, we introduce an alternative protocol to activate the sluggish iron(III) species with non-redox metal ions, which can promote its oxidizing power to facilitate substrate oxidation with dioxygen, thus initializing the catalytic cycle. In oxidations of N,N-dimethylaniline and its analogues, adding Zn(OTf)2 to the [Fe(TPA)Cl2]Cl catalyst can trigger the amine oxidation with dioxygen, whereas [Fe(TPA)Cl2]Cl alone is very sluggish. In stoichiometric oxidations, it has also been confirmed that the presence of Zn(OTf)2 can apparently improve the electron transfer capability of the [Fe(TPA)Cl2]Cl complex. Experiments using different types of substrates as trapping reagents disclosed that the iron(IV) species does not occur in the catalytic cycle, suggesting that oxidation of amines is initialized by electron transfer rather than hydrogen abstraction. Combined experiments from UV-Vis, high resolution mass spectrometry, electrochemistry, EPR and oxidation kinetics support that the improved electron transfer ability of iron(III) species originates from its interaction with added Lewis acids like Zn(2+) through a plausible chloride or OTf(-) bridge, which has promoted the redox potential of iron(III) species. The amine oxidation mechanism was also discussed based on the available data, which resembles the co-oxidase activity of lipoxygenases in oxidative dealkylation of xenobiotic metabolisms where an external electron donor is not essential for dioxygen activation.

Redox-inactive metal ions promoted the catalytic reactivity of non-heme manganese complexes towards oxygen atom transfer

Redox-inactive metal ions can modulate the reactivity of redox-active metal ions in a variety of biological and chemical oxidations. Many synthetic models have been developed to help address the elusive roles of these redox-inactive metal ions. Using a non-heme manganese(II) complex as the model, the influence of redox-inactive metal ions as a Lewis acid on its catalytic efficiency in oxygen atom transfer was investigated. In the absence of redox-inactive metal ions, the manganese(II) catalyst is very sluggish, for example, in cyclooctene epoxidation, providing only 9.9% conversion with 4.1% yield of epoxide. However, addition of 2 equiv. of Al(3+) to the manganese(II) catalyst sharply improves the epoxidation, providing up to 97.8% conversion with 91.4% yield of epoxide. EPR studies of the manganese(II) catalyst in the presence of an oxidant reveal a 16-line hyperfine structure centered at g = 2.0, clearly indicating the formation of a mixed valent di-μ-oxo-bridged diamond core, Mn(III)-(μ-O)2-Mn(IV). The presence of a Lewis acid like Al(3+) causes the dissociation of this diamond Mn(III)-(μ-O)2-Mn(IV) core to form monomeric manganese(iv) species which is responsible for improved epoxidation efficiency. This promotional effect has also been observed in other manganese complexes bearing various non-heme ligands. The findings presented here have provided a promising strategy to explore the catalytic reactivity of some di-μ-oxo-bridged complexes by adding non-redox metal ions to in situ dissociate those dimeric cores and may also provide clues to understand the mechanism of methane monooxygenase which has a similar diiron diamond core as the intermediate.

Non-redox metal ion promoted oxidative coupling of indoles with olefins by the palladium(ii) acetate catalyst through dioxygen activation: experimental results with DFT calculations

Non-redox metal ions can sharply improve the Pd(ii)-catalyzed oxidative coupling of indoles with acrylates, leading to one-step synthesis of bis(indolyl)methane derivatives.

Non-redox metal ions can promote Wacker-type oxidations even better than copper(II): a new opportunity in catalyst design

In Wacker oxidation and inspired Pd(ii)/Cu(ii)-catalyzed C-H activations, copper(ii) is believed to serve in re-oxidizing of Pd(0) in the catalytic cycle. Herein we report that non-redox metal ions like Sc(iii) can promote Wacker-type oxidations even better than Cu(ii); both Sc(iii) and Cu(ii) can greatly promote Pd(ii)-catalyzed olefin isomerization in which the redox properties of Cu(ii) are not essential, indicating that the Lewis acid properties of Cu(ii) can play a significant role in Pd(ii)-catalyzed C-H activations in addition to its redox properties. Characterization of catalysts using UV-Vis and NMR indicated that adding Sc(OTf)3 to the acetonitrile solution of Pd(OAc)2 generates a new Pd(ii)/Sc(iii) bimetallic complex having a diacetate bridge which serves as the key active species for Wacker-type oxidation and olefin isomerization. Linkage of trivalent Sc(iii) to the Pd(ii) species makes it more electron-deficient, thus facilitating the coordination of olefin to the Pd(ii) cation. Due to the improved electron transfer from olefin to the Pd(ii) cation, it benefits the nucleophilic attack of water on the olefinic double bond, leading to efficient olefin oxidation. The presence of excess Sc(iii) prevents the palladium(0) black formation, which has been rationalized by the formation of the Sc(iii)H-Pd(ii) intermediate. This intermediate inhibits the reductive elimination of the H-Pd(ii) bond, and facilitates the oxygen insertion to form the HOO-Pd(ii) intermediate, and thus avoids the formation of the inactive palladium(0) black. The Lewis acid promoted Wacker-type oxidation and olefin isomerization demonstrated here may open up a new opportunity in catalyst design for versatile C-H activations.

Synthesis, structural studies, kinetic stability, and oxidation catalysis of the late first row transition metal complexes of 4,10-dimethyl-1,4,7,10-tetraazabicyclo[6.5.2]pentadecane

Synthetic details for 4,11-dimethyl-1,4,8,11-tetraazabicyclo[6.5.2]pentadecane, the dimethyl ethylene cross-bridged homocyclen ligand are presented for the first time. Its novel Mn(2+), Fe(2+), Mn(3+), and Fe(3+) complexes have been synthesized and characterized. X-ray crystal structures were obtained for both manganese complexes, along with five additional Co(3+), Cu(2+), and Zn(2+) structures, the first structural characterization of complexes of this ligand. Each complex has the cis-V configuration of the cross-bridged macrocycle ring, leaving cis labile binding sites for interaction of the complex with oxidants and/or substrates. The copper(II) complex kinetic stability in 5 M HCl and at elevated temperatures was determined and compared to related complexes in the literature. The electronic properties of the manganese and iron complexes were evaluated using solid state magnetic moment determination and acetonitrile solution electronic spectroscopy, revealing high spin metal complexes in all cases. Cyclic voltammetry in acetonitrile of the divalent iron and manganese complexes revealed reversible redox processes, suggesting catalytic reactivity involving electron transfer processes are possible for both complexes. Screening of the Mn(2+) and Fe(2+) complexes for oxidation catalysis using hydrogen peroxide as the terminal oxidant showed both complexes are worthy of continued development.