Thermodynamic Study of CO2 Sorption by Polymorphic Microporous MOFs with Open Zn(II) Coordination Sites

Metal-Organic Framework-Based Selective Molecular Recognition of Organic Amines and Fixation of CO2 into Cyclic Carbonates

Synthesis and structural depiction of two new metal-organic frameworks (MOFs), namely, [{Zn(L)(oba)}·4H₂O]_α (Zn-MOF-1) and [{Cd_1/2(L)_1/2(nipa)_1/2(H₂O)_1/2}·(DMF)_1/2(H₂O)]_α (Cd-MOF-2) (where L = N²,N⁶-di(pyridin-4-yl)naphthalene-2,6-dicarboxamide, 4,4'-H₂oba = 4,4'-oxybisbenzoic acid, and 5-H₂nipa = 5-nitroisophthalic acid) are reported. Both Zn-MOF-1 and Cd-MOF-2 have been prepared by reacting ligand L and coligand 4,4'-H₂oba or 5-H₂nipa with the respective dihydrates of Zn(OAc)₂ and Cd(OAc)₂ (OAc = acetate). Crystal structure X-ray analysis discloses that Zn-MOF-1 displays an overall 2D → 3D interpenetrated framework structure. The topological analysis by ToposPro suggests a (4)-connected uninodal sql topology with a point symbol of {4⁴·6²} having 2D + 2D parallel polycatenation. However, crystal packing of Cd-MOF-2 adapted a porous framework architecture and was topologically simplified as (3,4)-connected binodal 2D net. In addition, both Zn-MOF-1 and Cd-MOF-2 were proved to be multifunctional materials for the recognition of organic amines and in the fixation of CO₂ to cyclic carbonates. Remarkably, Zn-MOF-1 and Cd-MOF-2 showed very good fluorescence stability in aqueous media and have shown 98 and 97% quenching efficiencies, respectively, for 4-aminobenzoic acid (4-ABA), among all of the researched amines. The mechanistic study of organic amines recognition proposed that fluorescence quenching happened mainly through hydrogen-bonding and π-π stacking interactions. Additionally, cycloaddition of CO₂ to epoxide in the presence of Zn-MOF-1 and Cd-MOF-2 afforded up to 96% of cyclic carbonate within 24 h. Both Zn-MOF-1 and Cd-MOF-2 exhibited recyclability for up to five cycles without noticing an appreciable loss in their sensing or catalytic efficiency.

Modulation of CO2 adsorption in novel pillar-layered MOFs based on carboxylate-pyrazole flexible linker

Metal-organic frameworks (MOFs) have attracted significant attention as sorbents due to their high surface area, tunable pore volume and pore size, coordinatively unsaturated metal sites, and ability to install desired functional groups by post-synthetic modification. Herein, we report three new MOFs with pillar-paddlewheel structures that have been synthesized solvothermally from the mixture of the carboxylate-pyrazole flexible linker (H₂L), 4,4-bipyridine (BPY)/triethylenediamine (DABCO), and Zn(ii)/Cu(ii) ions. The MOFs obtained, namely [Zn^II(L)BPY], [Cu^II(L)BPY], and [Cu^II(L)DABCO], exhibit two-fold interpenetration and dinuclear paddle-wheel nodes. The Zn(ii)/Cu(ii) cations are coordinated by two equatorial L linkers that result in two-dimensional sheets which in turn are pillared by BPY or DABCO in the perpendicular direction to obtain a neutral three-dimensional framework that shows one-dimensional square channels. The three pillar-layered MOFs were characterized as microporous materials showing high crystalline stability after activation at 120 °C and CO₂ adsorption. All MOFs contain uncoordinated Lewis basic pyrazole nitrogen atoms in the framework which have an affinity toward CO₂ and hence could potentially serve as CO₂ adsorption material. The CO₂ uptake capacity was initially enhanced by replacing Zn with Cu and then replacing the pillar, going from BPY to DABCO. Overall, all the MOFs exhibit low isosteric heat (Q_st) of adsorption which signifies an advantage due to the energy required for the adsorption and regeneration processes.

An overview on trace CO2 removal by advanced physisorbent materials

This review paper focuses on various gas processing technologies and materials that efficiently capture trace levels of carbon dioxide (CO₂). Fundamental separation mechanisms such as absorption, adsorption, and distillation technology are presented. Liquid amine-based carbon capture (C-capture) technologies have been in existence for over half a century, however, liquid amine capture relies upon chemical reactions and is energy-intensive. Liquid amines are thus not economically viable for broad deployment and offer little room for innovation. Innovative C-capture technologies must improve both the environmental footprint and cost-effectiveness. As a promising alternative, physisorbents have many advantages including considerably lower regeneration energy. Generally, existing classes of physisorbent materials, such as metal-organic frameworks (MOFs) and zeolites are selective toward C-capture. However, their selectivity is currently not high enough to remove trace levels (e.g., ~1%) of CO₂ from various natural gas process streams. This review summarizes the current advancements in physisorbent materials for CO₂ capture. Here, key performance parameters needed to select the most suitable candidate are highlighted. Furthermore, this review discusses the scope for the development of better performing CO₂ selective physisorbents from both environmental and economic perspectives. In addition, hybrid ultra microporous materials (HUMs), characterized mainly by ultra-micro pores (<0.7 nm), are discussed in reference to C-capture. Various characteristics of HUMs result in high selectivity and applicability in difficult separations such as the gas sweetening and C-capture from complex humid mixed gas streams.

Quantitative Assessment of Vapor Molecule Adsorption to Solid Surfaces by Flow Rate Monitoring in Microfluidic Channels

Measuring parameters related to gas adsorption on the effective surfaces of solid samples is important in catalyst studies. Further attention on the subject has appeared due to the materials and methods required to concentrate the gaseous biomarkers for detection. The conventional methods are mainly based on the volumetric and gravimetric analyses, which are applicable to bulk samples. No standard method has yet been provided for such measurements on thin films, which are the most commonly used samples for material screening. Here, a novel method is presented for the adsorption coefficient measurement on thin-film samples. This method comprises coating of the inner walls of a microfluidic channel with the thin film under test. The recorded diffusion rates for a trace gas along this microchannel are compared with the solutions of the adsorption-diffusion equation of the channel for determining the adsorption coefficient of the gas molecule to the inner walls of the channel. The high ratio of surface-to-volume in such channels magnifies the gas sorption effects and improves accuracy. The method is fast, versatile, and cost-effective, allowing measurements at different temperatures and atmospheric pressures. The adsorption coefficients of different isomers of butanol on poly(methyl methacrylate) sheets, zinc oxide thick films, and gold thin films are determined as examples.

A multifunctional Co-based metal-organic framework: heterogeneous catalysis, chemiluminescence sensing and moisture-dependent solvatochromism

Crystalline materials with multi-catalytic applications are of great value to both fundamental research and practical applications. The platform of metal-organic frameworks (MOFs) is utilized to fabricate a microporous versatile catalyst with high stability. Self-assembly of a flexible ligand, 4-(4-carboxybenzylamino)benzoic acid (H2CBBA), with Co(ii) resulted in a 3D framework, CBBA-Co, with Co3O clusters exposed in the zigzag channels. Upon in situ activation, CBBA-Co exhibited multiple heterogeneous catalytic activities. Theoretical calculations were carried out to give insights into the catalytic process. In addition, CBBA-Co also showed promising potential in optical sensing by virtue of its catalytic activity. The luminol chemiluminescence was greatly enhanced by CBBA-Co, and linear determination of the concentration of H2O2 in the range of 0-30% was established. The successful implementation of CBBA-Co indicates the feasibility and promising future of employing MOFs as an efficient platform for the fabrication and study of multifunctional catalysts, both experimentally and theoretically.

Exploring the multifunctionality in metal–organic framework materials: how do the stilbenedicarboxylate and imidazolyl ligands tune the characteristics of coordination polymers?

A synergistic effect causes MOF materials to demonstrate excellent iodine vapor retention and luminescence properties.

Multifunctional copper dimer: structure, band gap energy, catalysis, magnetism, oxygen reduction reaction and proton conductivity

A new copper dimeric complex has been synthesized, characterized and used as a multifunctional material.