Possible Steric Control of the Relative Strength of Chelation Enhanced Fluorescence for Zinc(II) Compared to Cadmium(II): Metal Ion Complexing Properties of Tris(2-quinolylmethyl)amine, a Crystallographic, UV−Visible, and Fluorometric Study

Synthesis, Crystal Structure, Fluorescence and Theoretical Calculations of Three Zn(II)/Cd(II) Complexes with Bis-dentate N,N-Quinoline Schiff Base

Three d10 metal complexes, ZnL(OAc)2 (1), CdL(OAc)2 (2) and [CdL2(NO3)2]·CH3CN (3) were synthesized using the ligand (E)-N-(3-methoxy-4-methylphenyl)-1-(quinolin-2-yl)methanimine (L) and characterized by FT-IR spectra, NMR spectra, and CHN elemental analysis. Single-crystal X-ray diffraction analysis revealed that complexes 1 and 2 are isostructural, with the central metal adopting a hexacoordinate octahedral geometry, while complex 3 adopts a triangular dodecahedron geometry. Thermal gravimetric analysis showed that these complexes exhibit good thermal stability. Solid-state fluorescence spectroscopy measurements demonstrated that complexes 1-3 exhibit bright yellow-green fluorescence (λem = 564 nm for 1; 524 nm for 2; 542 nm for 3), suggesting their potential as photoluminescent materials. Furthermore, DFT calculations, including frontier molecular orbitals, energy levels, and surface electrostatic potential, provided insights into the structural and electronic spectral properties of complexes 1-3.

Fluorogen-Functionalized Mesoporous Silica Hybrid Sensing Materials: Applications in Cu2+ Detection

Since Cu2+ ions play a pivotal role in both ecosystems and human health, the development of a rapid and sensitive method for Cu2+ detection holds significant importance. Fluorescent mesoporous silica materials (FMSMs) have garnered considerable attention in the realm of chemical sensing, biosensing, and bioimaging due to their distinctive structure and easily functionalized surfaces. As a result, numerous Cu2+ sensors based on FMSMs have been devised and extensively applied in environmental and biological Cu2+ detection over the past few decades. This review centers on the recent advancements in the methodologies for preparing FMSMs, the mechanisms underlying sensing, and the applications of FMSMs-based sensors for Cu2+ detection. Lastly, we present and elucidate pertinent perspectives concerning FMSMs-based Cu2+ sensors.

A fluorescent probe based on a phenylalanine derivative is capable of sequential detection of Zn2+ and Cys/His

A facile and dual fluorescent chemosensor (named 7-IDF) based on a phenylalanine derivative with an indole group was designed and synthesized. 7-IDF can selectively and sensitively detect Zn²⁺ via obvious fluorescence enhancement in an aqueous solution. Remarkably, the 7-IDF-Zn complex with blue luminescence has higher selectivity toward cysteine (Cys) and histidine (His) than for other amino acids. Intriguingly, 7-IDF can also be used as an excellent probe to detect Zn²⁺ in real water samples. Moreover, 7-IDF and 7-IDF-Zn possess excellent biocompatibility and cell permeability, and 7-IDF can consecutively detect Zn²⁺ and Cys/His in Hela cells through fluorescence imaging experiments. This study suggests that the phenylalanine-based chemosensor possesses great potential applications for the sequential detection of Zn²⁺ and Cys/His in biosystems.

Selective detection of manganese(II) ions based on the fluorescence turn-on response via histidine functionalized carbon quantum dots

Herein, water-soluble emissive carbon quantum dots (His-CQDs) were synthesized from pyrolysis of sodium citrate in the presence of histidine under hydrothermal conditions. The as-synthesized His-CQDs were characterized using Fourier transform infrared (FT-IR), fluorescence spectroscopy, dynamic light scattering (DLS), and transmission electron microscopy (TEM) techniques. The obtained His-CQDs display a strong emission peak at 534 nm when excited at 476 nm with a high quantum yield (61.8 %). The as-synthesized His-CQDs were applied as a new platform for highly selective determination of Mn(II) based on the fluorescence "turn-on" response with a limit of detection of 1.85 µg L^-1 (at 3σ) and a linear range of 3.50-35.5 µg L^-1 in aqueous solution. The sensing mechanism of the His-CQDs probe for the detection of Mn(II) was studied via density functional theory (DFT), FT-IR, and EDTA complexation methodology. In addition, His-CQDs were successfully applied to determine the accurate amounts of Mn(II) in whole blood control material. More importantly, the integrating such an efficient sensor with point-of-care technology can enable portable, easy-to-use, and rapid sensing systems for better biological and clinical applications.

Sensitive visual detection of intracellular zinc ions based on signal-on polydopamine carbon dots

The concentration of intracellular zinc ions is a significant clinical parameter for diagnosis. However, it is still a challenge for direct visual detection of zinc ions in cells at single-cell level. To address this issue, herein, water-soluble amino-rich polydopamine carbon quantum dots (PDA-CQDs) were successfully synthesized, with strong blue-green fluorescence as the probes for zinc ions detection in cells. The structure and properties of PDA-CQDs were confirmed by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transformed infrared (FT-IR), UV-visible spectrophotometry (UV-vis), and fluorescence spectroscopy. Importantly, by successfully linking salicylaldehyde (SA) to PDA-CQDs via nucleophilic reaction, the FL quenching and Zn ions induced FL-recovering system was built up, thus offering a signal-on platform for the detection of zinc ions. This PDA-CQDs-SA nanoprobe can be applied for the detection of Zn²⁺with a detection limit of 0.09μM, with good biocompatibility confirmed using cytotoxicity assay. Of significance, the results of fluorescence bioimaging showed that PDA-CQDs-SA is able to detect Zn²⁺in single-cell visually, with the detection limit of Zn ions in cells as low as 0.11μM per cell, which was confirmed using flow cytometry. Therefore, this work offers a potential probe for Zn²⁺detection in cells at single-cell level, towards the precise diagnosis of zinc ions related diseases.

Influence of a series of pyridine ligands on the structure and photophysical properties of Cd(ii) complexes

Five Cd(ii) complexes based on α-acetamidocinnamic acid (HACA) and a set of N,N^N and N^N^N-pyridine (dPy) yield complexes with diverse nuclearities and enhanced quantum yields, benefiting from the chelation enhanced effect (CHEF) of dPy.

Ligand isomerism fine-tunes structure and stability in zinc complexes of fused pyrazolopyridines

Fused-ring pyrazoles offer a versatile platform for derivitization to give finely tuned and functional ligands in coordination assemblies. Here, we explore the pyrazolo[4,3-b]pyridine (HL1) and pyrazolo[3,4-c]pyridine (HL2) backbones and their N-substituted derivatives, using their coordination chemistry with zinc(II) in the solid state and in solution to examine the steric and electronic effects of varying their substitution pattern. The parent heterocycles HL1 and HL2 both generate robust and permanently porous isomeric MOFs on reaction with zinc and a dicarboxylate co-ligand. The subtle geometric change offered by the position of the backbone pyridyl nitrogen atom leads to substantial changes in the pore size and total pore volume, which is reflected in both their surface areas and CO₂ uptake performance. Both materials are also unusually resilient to atmospheric water vapour by virtue of the strong metal-azolate bonding. The isomeric chelating ligands L3-L6, generated by N-arylation of the parent heterocycles with a 2-pyridyl group, each coordinate to zinc to give either mononuclear or polymeric coordination compounds depending on the involvement of the backbone pyridine nitrogen atom. While crystal packing influences based on the steric preferences of the ligands are dominant in the crystalline phase, fluorescence spectroscopy is used to show that the 2H isomers L4 and L6 show distinct coordination behaviour to the 1H isomers L3 and L5, forming competing [ML] and [ML₂] species in soution. The first stability constant for L6 with zinc(II) is an order of magnitude larger than for the other three ligands, suggesting an improved binding strength based on the electron configuration in this isomer. These results show that careful control of remote substitution on fused pyrazole ligands can lead to substantial improvements in the stability of the resulting complexes, with consequences for the design of stable coordination assemblies containining labile metal ions.

Steric and Electronic Effects on the Structure and Photophysical Properties of Hg(II) Complexes

Since many factors influence the coordination around a metal center, steric and electronic effects of the ligands mainly determine the connectivity and, thus, the final arrangement. This is emphasized on Hg(II) centers, which have a zero point stabilization energy and, thus, a flexible coordination environment. Therefore, the unrestricted Hg(II) geometry facilitates the predominance of the ligands during the structural inception. Herein, we synthesized and characterized a series of six Hg(II) complexes with general formula (Hg(Pip)₂(dPy)) (Pip = piperonylate, dPy = 3-phenylpyridine (3-phpy) (1), 4-phenylpyridine (4-phpy) (2), 2,2′-bipyridine (2,2′-bipy) (3), 1,10-phenanthroline (1,10-phen) (4), 2,2′:6′,2′-terpyridine (terpy) (5), or di(2-picolyl)amine (dpa) (6)). The elucidation of their crystal structures revealed the arrangement of three monomers (3, 5, and 6), one dimer (4), and two coordination polymers (1 and 2) depending on the steric requirements of the dPy and predominance of the ligands. Besides, the study of their photophysical properties in solution supported by TD-DFT calculations enabled us to understand their electronic effects and the influence of the structural arrangement on them.

Six Hg(II) complexes containing 1,3-benzodioxole-5-carboxylic acid and pyridine derivatives bearing N-, N^N′-, and N^N^N-donor sites have been characterized and their crystal structure elucidated. Steric crowding defined the predominance of the linkers in the structural arrangement, varying from monomers to coordination polymers. Their photophysical properties were analyzed through experimental and TD-DFT calculations, identifying the character and regions involved on each electronic transition. In addition, seclusion of the HOMO from the LUMO defined them as appropriate to selective band gap tuning.

Steric crowding of a series of pyridine based ligands influencing the photophysical properties of Zn(II) complexes

The combination of α-acetamidocinnamic acid (HACA) and different N, N,N and N,N,N pyridines (dPy) leads to crowded Zn(ii) metal centers. The increasing bulkiness competes with the chelation enhanced effect (CHEF) in the resulting quantum yields.

Optimization of the Red Tilapia (Oreochromis spp.) Viscera Hydrolysis for Obtaining Iron-Binding Peptides and Evaluation of In Vitro Iron Bioavailability

Iron deficiencies continue to cause significant health problems in vulnerable populations. A good strategy to combat mineral deficiency includes fortification with iron-binding peptides. This research aims to determine the optimal conditions to hydrolyze red tilapia viscera (RTV) using Alcalase 2.4 L and recovery of iron-binding protein hydrolysate. The result showed that under the optimal hydrolysis condition including pH 10, 60 °C, E/S ratio of 0.306 U/g protein, and substrate concentration of 8 g protein/L, the obtained hydrolysate with 42.5% degree of hydrolysis (RTVH-B), displayed the maximal iron-binding capacity of 67.1 ± 1.9%. Peptide fractionation was performed using ultrafiltration and the <1 kDa fraction (FRTVH-V) expressed the highest iron-binding capacity of 95.8 ± 1.5%. Iron content of RTVH-B and its fraction was assessed, whereas iron uptake was measured indirectly as ferritin synthesis in a Caco-2 cell model and the result showed that bioavailability of bound minerals from protein complexes was significantly higher (p < 0.05) than iron salt in its free form, increased 4.7 times for the Fe2+-RTVH-B complex. This research suggests a potential application of RTVH-B as dietary supplements to improve iron absorption.

Chemosensing of Guanosine Triphosphate Based on a Fluorescent Dinuclear Zn(II)-Dipicolylamine Complex in Water

Guanosine triphosphate (GTP) is a key biomarker of multiple cellular processes and human diseases. The new fluorescent dinuclear complex [Zn₂(L)(S)][OTf]₄, 1 (asymmetric ligand, L = 5,8-Bis{[bis(2-pyridylmethyl)amino] methyl}quinoline, S = solvent, and OTf = triflate anion) was synthesized and studied in-depth as a chemosensor for nucleoside polyphosphates and inorganic anions in pure water. Additions at neutral pH of nucleoside triphosphates, guanosine diphosphate, guanosine monophosphate, and pyrophosphate (PPi) to 1 quench its blue emission (λ_em = 410 nm) with a pronounced selectivity toward GTP over other anions, including adenosine triphosphate (ATP), uridine triphosphate (UTP), and cytidine triphosphate (CTP). The efficient quenching response by the addition of GTP was observed in the presence of coexisting species in blood plasma and urine with a detection limit of 9.2 μmol L^-1. GTP also shows much tighter binding to the receptor 1 on a submicromolar level. On the basis of multiple spectroscopic tools (¹H, ³¹P NMR, UV-vis, and fluorescence) and DFT calculations, the binding mode is proposed through three-point recognition involving the simultaneous coordination of the N⁷ atom of the guanosine motif and two phosphate groups to the two Zn(II) atoms. Spectroscopic studies, MS-ESI, and DFT suggested that GTP bound to 1 in 1:1 and 2:2 models with high overall binding constants of log β_1 (1:1) = 6.05 ± 0.01 and log β₂ = 10.91 ± 0.03, respectively. The optical change and selectivity are attributed to the efficient binding of GTP to 1 by the combination of a strong electrostatic contribution and synergic effects of coordination bonds. Such GTP selectivity of an asymmetric metal-based receptor in water is still rare.

Differential Interaction of Metal Ions with Gold Nanoclusters and Application in Detection of Cobalt and Cadmium

Interest in biosensing platforms using protein fluorescent gold nanoclusters (FGNCs) has grown significantly in the past due to the unique optical properties they offer. This study investigates the interaction of metal ions with FGNCs, and the structural modifications brought about by the interaction resulting in fluorescence changes of the cluster and its successful application in the detection of two heavy metals, cobalt and cadmium. The binding of cobalt and cadmium to FGNCs synthesized from BSA significantly altered the secondary structure of the protein, causing a change in its hydrophobicity. It also resulted in a change in fluorescence properties of FGNCs by intersystem crossing (ICT) and fluorescence resonance energy transfer (FRET). Cobalt and cadmium could successfully be detected in the range of 5-165 ng/mL (R² = 0.95) and 20-1000 ng/ mL (R² = 0.91), respectively, with appreciable sensitivity. The principle was also applied for the detection of Vitamin B₁₂ in commercially available ampoules, validating the proposed method. Graphical Abstract Proposed detection method of cadmium and cobalt using FGNCs.

Luminescent Zn(ii) and Cd(ii) complexes with chiral 2,2′-bipyridine ligands bearing natural monoterpene groups: synthesis, speciation in solution and photophysics

Coordination of chiral ligands containing a 2,2′-bipyridine moiety and natural terpene (+)-limonene or (+)-3-carene groups to zinc(ii) and cadmium(ii) leads to excitation wavelength dependent emission.

Quinoline- and isoquinoline-derived ligand design on TQEN (N,N,N′,N′-tetrakis(2-quinolylmethyl)ethylenediamine) platform for fluorescent sensing of specific metal ions and phosphate species

Utilizing the unique metal-binding and fluorescent properties of methoxy-substituted (iso)quinolines, varieties of fluorescent probes were developed from TQEN (N,N,N′,N′-tetrakis(2-quinolylmethyl)ethylenediamine) structure.

Cd(II) enhanced fluorescence and Zn(II) quenched fluorescence with phenylenevinylene terpyridine: A theoretical investigation

Phenylenevinylene terpyridine (mepvpt) shows chelation enhanced fluorescence (CHEF) with Cd(II) and chelation quenched fluorescence (CHQF) with Zn(II), respectively. To understand the behaviors, we studied their intrinsic optical properties using DFT/TDDFT methods. The results show that fluorescence quantum yields (FQY) of mepvpt, mepvpt-Cd and mepvpt-Zn are low due to high ISC rates from higher excited states rather than the S₁ excited state. When mepvpt chelates Cd(II), the molecular structure becomes more planar and S_3,4 → S₀ radiation rates become higher than that of mepvpt, which results in CHEF. When mepvpt chelates Zn(II), a new S₄ → S₀ emission with low oscillator strength occurs and high S₄ → T_n ISC rates appear, which leads to CHQF. This proposed mechanism of metal fluorescence enhancing/quenching suggests a design strategy for single-molecular multi-analyte sensors.

[9]aneN3-based fluorescent receptors for metal ion sensing, featuring urea and amide functional groups

The sensing and recognition properties of three new [9]aneN₃-based chemosensors have been studied both in solution and in the solid state.

Crystal structure, spectroscopic, DNA binding studies and DFT calculations of a Zn(ii) complex

A highly fluorescent Zn(ii) complex and its DNA-binding and bio-imaging applications are reported.

Fluorescent ZnII Chemosensor Mediated by a 1,8-Naphthyridine Derivative and It's Photophysical Properties

One of the greatest challenges in using fluorescent chemosensors for highly selective and sensitive transition-metal ions is finding an efficient and simple method for its synthesis. In this study, a highly efficient fluorescence chemosensor for ZnII was developed from N-Boc-L-proline modified 1,8-naphthyridine. The fluorescence intensity of the chemosensor was increased significantly only in the presence of ZnII ion which provided a perceived color change for rapid visual sensing, while other metal ions showed fluorescence quenching or little changes. It was worth noting that the chemosensor L distinguished ZnII from CdII commonly having similar properties. The solvent effect and possible bonding mode for fluorescence enhancement have been also discussed. Results of this study indicated that the Boc-group in l-proline significantly improved the sensitivity and selectivity for ZnII detection performance, as confirmed by comparison experiments and time dependent-density functional theory (TD-DFT) calculations.

β-Carboline–imidazopyridine hybrids: selective and sensitive optical sensors for copper and fluoride ions

Two rationally designed β-carboline–imidazopyridine hybrid chromofluorescent sensors S1 and S2 have been successfully synthesized and evaluated for the selective sensing of metal ions and anions.

Design, properties and application of a facile fluorescence switch for Cu(II)

A facile fluorescence switch based on Schiff base 2,2'-[1,3-phenylenbis- (methylidynenitrilo)]bis[benzenethiol] (PMBB) has been developed and used to sensing metal ions. UV-vis absorption and fluorescence emission spectra show that the PMBB receptor has high selectivity and sensitivity for Cu(II) ions. Based on the photoinduced electron transfer (PET) and chelation enhanced fluorescence (CHEF) mechanisms, the receptor exhibits an fluorescence "turn-on" switch signal for Cu(II). The 1:1 binding mode of PMBB and Cu (II) ions can be obtained by the Job-plot and ESI-Mass spectra data. Noticeably, the color changes (from colorless to yellow) of PMBB solutions for Cu(II) sensing can be observed by naked eyes in the sunlight. The detection limit of the receptor for Cu(II) may reach 10(-7)mol/L with a good linear relation in the lower concentrations of Cu(II). To develop the practical application, the Cu(II) ions in swimming pool water samples were detected. Results show that PMBB receptor as a fluorescent probe can use to detect the trace level of Cu(II) in the environmental samples. This work contributes to providing a facile strategy for designing efficient probes and developing their practical application value.

Steric and Stereochemical Modulation in Pyridyl- and Quinolyl-Containing Ligands

Nitrogen-containing pyridine and quinoline are outstanding platforms on which excellent ionophores and sensors for metal ions can be built. Steric and stereochemical effects can be used to modulate the affinity and selectivity of such ligands toward different metal ions on the coordination chemistry front. On the signal transduction front, such effects can also be used to modulate optical responses of these ligands in metal sensing systems. In this review, steric modulation of achiral ligands and stereochemical modulation in chiral ligands, especially ionophores and sensors for zinc, copper, silver, and mercury, are examined using published structural and spectral data. Although it might be more challenging to construct chiral ligands than achiral ones, isotropic and anisotropic absorption signals from a single chiroptical fluorescent sensor provide not only detection but also differentiation of multiple analytes with high selectivity.

Catalyst-Controlled and Tunable, Chemoselective Silver-Catalyzed Intermolecular Nitrene Transfer: Experimental and Computational Studies

The development of new catalysts for selective nitrene transfer is a continuing area of interest. In particular, the ability to control the chemoselectivity of intermolecular reactions in the presence of multiple reactive sites has been a long-standing challenge in the field. In this paper, we demonstrate examples of silver-catalyzed, nondirected, intermolecular nitrene transfer reactions that are both chemoselective and flexible for aziridination or C-H insertion, depending on the choice of ligand. Experimental probes present a puzzling picture of the mechanistic details of the pathways mediated by [(tBu3tpy)AgOTf]2 and (tpa)AgOTf. Computational studies elucidate these subtleties and provide guidance for the future development of new catalysts exhibiting improved tunability in group transfer reactions.

Surface biofunctionalized CdS and ZnS quantum dot nanoconjugates for nanomedicine and oncology: to be or not to be nanotoxic?

Herein, for the first time, we demonstrated that novel biofunctionalized semiconductor nanomaterials made of Cd-containing fluorescent quantum dot nanoconjugates with the surface capped by an aminopolysaccharide are not biologically safe for clinical applications. Conversely, the ZnS-based nanoconjugates proved to be noncytotoxic, considering all the parameters investigated. The results of in vitro cytotoxicity were remarkably dependent on the chemical composition of quantum dot (CdS or ZnS), the nature of the cell (human cancerous and embryonic types), and the concentration and time period of exposure to these nanomaterials, caused by the effects of Cd2+ on the complex nanotoxicity pathways involved in cellular uptake. Unexpectedly, no decisive evidence of nanotoxicity of CdS and ZnS conjugates was observed in vivo using intravenous injections in BALB/c mice for 30 days, with minor localized fluorescence detected in liver tissue specimens. Therefore, these results proved that CdS nanoconjugates could pose an excessive threat for clinical applications due to unpredicted and uncorrelated in vitro and in vivo responses caused by highly toxic cadmium ions at biointerfaces. On the contrary, ZnS nanoconjugates proved that the "safe by design" concept used in this research (ie, biocompatible core-shell nanostructures) could benefit a plethora of applications in nanomedicine and oncology.

OFF–ON–OFF fluorescent response of N,N,N′,N′-tetrakis(1-isoquinolylmethyl)-2-hydroxy-1,3-propanediamine (1-isoHTQHPN) toward Zn2+

1-isoHTQHPN exhibits OFF–ON–OFF fluorescent response toward increasing concentration of Zn²⁺ions due to the specific intramolecular excimer formation in a mononuclear complex.

Tris(8-methoxy-2-quinolylmethyl)amine (8-MeOTQA) as a highly fluorescent Zn2+probe prepared by convenient C3-symmetric tripodal amine synthesis

The convenient synthesis ofC₃-symmetric tribenzylamines utilizing acetaldehyde ammonia trimer (1) revealed tris(8-methoxy-2-quinolylmethyl)amine (8-MeOTQA) as a fluorescent zinc sensor with high sensitivity.

Two Schiff base ligands for distinguishing ZnII/CdII sensing—effect of substituent on fluorescent sensing

Two Schiff base ligands (HL1, HL2) were synthesized as fluorescent sensors for Zn²⁺ or Cd²⁺. With an ethoxyl group, HL1 can distinguishingly sense Zn²⁺ and Cd²⁺, while HL2 exclusively responds to Zn²⁺.