Differences Between Amine- and Phosphine-Boranes: Synthesis, Photoelectron Spectroscopy, and Quantum Chemical Study of the Cyclopropylic Derivatives

Protonation of P-Stereogenic Phosphiranes: Phospholane Formation via Ring Opening and C-H Activation

Protonation of cyclopropanes and aziridines is well-studied, but reactions of phosphiranes with acids are rare and have not been reported to result in ring opening. Treatment of syn-Mes*PCH₂CHR (Mes* = 2,4,6-(t-Bu)₃C₆H₂, R = Me or Ph, syn-1-2) or anti-Mes*PCH₂CHPh (anti-2) with triflic acid resulted in regiospecific anti-Markovnikov C-protonation with ring opening and cyclophosphination of a Mes* ortho-t-Bu group to yield the phospholanium cations [PH(CH₂CH₂R)(4,6-(t-Bu)₂-2-CMe₂CH₂C₆H₂)][OTf] (R = Me or Ph, 3-4), which were deprotonated with NEt₃ to give phospholanes 5-6. Enantioenriched or racemic syn-1 both gave racemic 3. The byproduct [Mes*PH(CH₂CH₂Me)(OH)][OTf] (7) was formed from syn-1 and HOTf in the presence of water. Density functional theory calculations suggested that P-protonation followed by ring opening and hydride migration to C yields the phosphenium ion, [Mes*P(CH₂CH₂Me)][OTf], which undergoes C-H oxidative addition of an o-t-Bu methyl group. This work established a new reactivity pattern for phosphiranes.

Dehydrogenation of ammonia-borane to functionalize neutral and Li+-encapsulated C60, C70 and C36 fullerene cages: a DFT approach

Mechanistic investigations into the functionalization of three fullerene cages, viz. C₆₀, C₇₀, and C₃₆ through dehydrogenation of ammonia-borane (AB) have been conducted using Density Functional Theory (DFT). In this process of functionalization, different ring fusions, namely (6-6), (6-5) positions for C₆₀ and C₇₀, and an additional (5-5) for C₃₆ fullerene have been investigated. The optimized geometries of all the complexes and transition states have been characterized using the M06-2X functional in conjunction with the 6-31G(d) basis set. The effect of Li⁺-encapsulation on the energetics and activation barriers of H₂ attachment has also been examined. Although the process of functionalization of neutral fullerenes proceeds extensively through concerted pathways, a step-wise route has been observed for the encapsulated systems. NPA charge analysis and Wiberg bond index (WBI) have been used in order to detect the change in the nature of participating hydrogen atoms and validate the variation in the bond order of the C-C connectivity respectively upon hydrogenation. GCRD parameters have also been calculated to explicate the electronic properties of the hydrogenated products. The (6-6) hydrogenation is observed to be favoured thermodynamically and kinetically for both neutral and Li⁺-encapsulated C₆₀ and C₇₀, while (5-5) is found to be the most preferred site for C₃₆ systems. Our theoretical exploration suggests that the covalent functionalization of the fullerene cages can be done successfully viaAB resulting in the stabilization of these systems. In short, the present work will provide a general idea about the detailed mechanism related to the functionalization of fullerene cages, which will further motivate researchers in fullerene chemistry.

Utilizing the Combined Power of Theory and Experiment to Understand Molecular Structure – Solid-State and Gas-Phase Investigation of Morpholine Borane

The molecular structure of morpholine borane complex has been studied in the solid state and gas phase using single-crystal X-ray diffraction, gas electron diffraction, and computational methods. Despite both the solid-state and gas-phase structures adopting the same conformation, a definite decrease in the B–N bond length of the solid-state structure was observed. Other structural variations in the different phases are presented and discussed. To explore the hydrogen storage potential of morpholine borane, the potential energy surface for the uncatalyzed and BH3-catalyzed pathways, as well as the thermochemistry for the hydrogen release reaction, were investigated using accurate quantum chemical methods. It was observed that both the catalyzed and uncatalyzed dehydrogenation pathways are favourable, with a barrier lower than the B–N bond dissociation energy, thus indicating a strong propensity for the complex to release a hydrogen molecule rather than dissociate along the B–N bond axis. A minimal energy requirement for the dehydrogenation reaction has been shown. The reaction is close to thermoneutral as demonstrated by the calculated dehydrogenation reaction energies, thus implying that this complex could demonstrate potential for future on-board hydrogen generation.

Direct Experimental Observation of in situ Dehydrogenation of an Amine-Borane System Using Gas Electron Diffraction

In situ dehydrogenation of azetidine-BH₃, which is a candidate for hydrogen storage, was observed with the parent and dehydrogenated analogue subjected to rigorous structural and thermochemical investigations. The structural analyses utilized gas electron diffraction supported by high-level quantum calculations, while the pathway for the unimolecular hydrogen release reaction in the absence and presence of BH₃ as a bifunctional catalyst was predicted at the CBS-QB3 level. The catalyzed dehydrogenation pathway has a barrier lower than the predicted B-N bond dissociation energy, hence favoring the dehydrogenation process over the dissociation of the complex. The predicted enthalpy of dehydrogenation at the CCSD(T)/CBS level indicates that mild reaction conditions would be required for hydrogen release and that the compound is closer to thermoneutral than linear amine boranes. The entropy and free energy change for the dehydrogenation process show that the reaction is exergonic, energetically feasible, and will proceed spontaneously toward hydrogen release, all of which are important factors for hydrogen storage.

Exploration of M(100)-2×1 (M=Si, Ge) surface termination through hydrogen passivation using ethane and ammonia-borane derivatives: A theoretical approach

Termination process of Si(100)-2 × 1 as well as Ge(100)-2 × 1 reconstructed surfaces have been explored comprehensively through the dehydrogenation of ethane and ammonia-borane and their several analogues by employing density functional theory (DFT). From our study, it is evident that the termination of Si-surface via the dehydrogenation of aforementioned ethane and NH₃BH₃ derivatives is more feasible compared to Ge-surface. For ethane, the investigation shows that the substitution of non-participating hydrogens with +I group (electron donating) causes an enhancement in the kinetic and thermodynamic feasibility of the termination process, whereas the implementation of -I substituent (electron withdrawing) makes an adverse effect. While exploring the termination of Si- as well as Ge-surfaces through the dehydrogenation of NH₃BH₃ and its derivatives, it is noticed that from both the kinetic as well as thermodynamic perspectives, the termination processes are more feasible than that of ethane and its derivatives. We have further examined the detailed mechanism of each termination process by analyzing the geometrical parameters and NPA charges. From bonding evaluation, it is evident that the hydrogen abstraction from ethane by both the surfaces is symmetric in nature, where both the hydrogens show slightly positive charge. But for NH₃BH₃ the hydrogen abstraction process becomes asymmetric, where the boron associated hydrogen is abstracted as hydride by the electrophilic surface Si (Ge) and the hydrogen bonded with the N-centre is abstracted as proton by the nucleophilic surface Si (Ge). Overall, the present theoretical work reveals one of the efficient chemical processes for terminating Si as well as Ge(100)-2 × 1 reconstructed surfaces through the formation of non-polar SiH bonds.

A Computational Study of the Reactivity of 3,5-(Oxo/Thioxo) Derivatives of 2,7-Dimethyl-1,2,4-Triazepines. Keto-Enol Tautomerization and Potential for Hydrogen Storage

The G4 level of theory was used to evaluate the acidity of a series of triazepines, that is, 3-thioxo-5-oxo-, 5-thioxo-3-oxo-, 3,5-dioxo-, and 3,5-dithioxo- derivatives of 2,7-dimethyl-[1,2,4]-triazepine. The ability of their available nitrogen lone pair to form a dative bond with BH₃ was also studied to highlight the resulting changes in acidity and to understand the behavior of the complexes formed. The effect of the substitution of sulfur by oxygen on the stability of the complex and the activation barrier of dehydrogenation was also evaluated. The formation of these triazepine:BH₃ complexes, accompanied by the loss of H₂ molecular hydrogen, is a strongly exothermic process. With one triazepine the pathway for H₂ elimination from [triazepine]-BH₃ is characterized by a small energy barrier ranging from 11 to 23 kJ/mol. The second H₂ elimination is relatively more energetic than the first one (∼27 kJ/mol). Because of the steric hindrance associated with the addition of two molecules of triazepine (triazepine)₂-BH₂, the third dehydrogenation step is relatively less favorable than the two preceding steps, particularly in the case of the 3,5-dithio- derivative. The potential energy surface associated with the dehydrogenation reaction of all triazepine derivatives was explored. The thermodynamic favorability reported in this study could allow triazepine-borane to be used as a material for H₂ storage applications.

The chemistry of parent phosphiranide in the coordination sphere of tungsten

2-Chloroethylphosphine W(CO)5 complex readily reacts with sodium hydride. With one equivalent of NaH, the parent phosphirane complex is obtained. With more than two equivalents, the phosphiranide complex is exclusively formed. With 1.5 equivalents, a 1 : 1 mixture of and is obtained but readily attacks at the phosphorus atom by splitting of ethylene and by the formation of the P-P complex . In turn, the P-P bond of is split by NaH to yield the phosphide complex . The phosphiranide complex is a good source for a large variety of functional phosphirane complexes . With BrCN, the 1-cyanophosphirane complex is formed. Upon heating it loses its complexing group. Upon hydrolysis, it gives the 1-hydroxyphosphirane complex which dimerizes in basic medium by opening one P-C bond of the ring to give . The reaction of with PhPCl2 yields the triphosphorus complex whose molecular structure has been established by X-ray crystal structure analysis.