Biosorption of Heavy Metal Ions (Pb, Cu, and Cd) from Aqueous Solutions by the Marine Alga Sargassum sp. in Single- and Multiple-Metal Systems

Heavy metals remediation through lactic acid bacteria: Current status and future prospects

With the development of industrialization and urbanization, heavy metal (HM) pollution has become an urgent problem in many countries. The use of microorganisms to control HM pollution has attracted the attention of many scholars due to its advantages of mild conditions, low process cost, and no secondary pollution. In this context, this review aimed to compile recent advances on the potential of lactic acid bacteria (LAB) as HMs biosorbents. As a food-safe class of probiotic, LAB can not only be used for HM remediation in soil and wastewater, but most importantly, can be used for metal removal in food. The extracellular adsorption and intracellular accumulation are the main mechanisms of HM removal by LAB. Lactic acid (LA) fermentation is also one of the removal mechanisms, especially in the food industry. The pH, temperature, biomass, ion concentration and adsorption time are the essential parameters to be considered during the bioremediation. Although the LAB remediation is feasible in theory and lab-scale experiments, it is limited in practical applications due to its low efficiency. Therefore, the commonly used methods to improve the adsorption efficiency of LAB, including pretreatment and mixed-cultivation, are also summarized in this review. Finally, based on the review of literature, this paper presents the emerging strategies to overcome the low adsorption capacity of LAB. This review proposes the future investigations required for this field, and provides theoretical support for the practical application of LAB bioremediation of HMs.

Element composition of several marine macrophytes (Crimea, Black Sea) and correlations with the element abundances in sediments and seawater

The study of the element accumulation in marine plants against the backdrop of permanently increasing environmental pollution is of particular importance due to the participation of these plants in biogeochemical cycles. The element abundances are highly variable and depend on both the macrophyte species and environment. The purpose of this study was to analyze the elemental composition of widespread marine plants of different taxonomic affiliations collected in the same area of the Black Sea coast. The contents of 74 elements in three species of lower (red, brown, green algae) and one species of higher plants (seagrass) were analyzed using inductively coupled plasma mass spectrometry. High contents of most elements were found in the red alga Ceramium ciliatum and in rhizomes of the seagrass Zostera noltei. In C. ciliatum, high metal bioaccumulation factors were found, which are dependent also on their concentration in the environment. Compared to the higher plant, all the macroalgae accumulated increased amounts of As and I. The seagrass proved to be a good concentrator of Mo and Sb, and relatively high contents of Mn, Co, Ni, Zn, Cd and Ir were registered in its leaves. High contents of Mg, S, Ge, Se and Ta were found in the green alga Ulva rigida, and elevated levels of Al, As, Sr, Zr, Ru, Rh, Pd, Ag, Ba and Re were noted in the brown alga Gongolaria barbata. The enrichment factors for most elements in the sediments were well above 1 with respect to both the local Late Pleistocene sediments and the upper continental crust. The strength of correlations between the element contents in the plants and sediments was found to decrease with the specific surface area growth and appeared to have a lower asymptotic limit of the sediments-seawater correlation strength.

Moss biomass as effective biosorbents for heavy metals in contaminated water

The study explored batch adsorption of Cd(II) and Pb(II) ions using moss biomass from Barbula consanguinea and Hyophila involuta, assessing removal efficiency concerning various parameters. Both moss species showed high removal rates for Cd(II) (87 % for B. consanguinea and 89 % for H. involuta) and Pb(II) (93 % for B. consanguinea and 94 % for H. involuta) from contaminated water, reaching equilibrium within 30 min. While Cd(II) removal was pH-independent, Pb(II) removal showed pH-dependence, peaking at pH 5.0-5.5. Adsorption isotherm analysis indicated that the Langmuir, Freundlich, Elovich, Sips, and Redlich-Peterson models best described Cd(II) and Pb(II) adsorption onto both moss species (except for Cd(II) adsorption onto H. involuta), with R 2  > 0.98. This confirms a heterogeneous surface with both monolayer and multilayer adsorption sites. The pseudo-second-order kinetic model confirmed chemisorption on moss biomass from both species. FTIR spectra identified major binding sites such as phenols, alkaloids, amines, alkenes, nitro compounds, and low-molecular-weight carbohydrates. EDS analysis validated the bonding of Cd(II) and Pb(II) ions to the biomass surface by displacing Ca(II) ions. According to the Langmuir model, moss biomass exhibited selective adsorption, favoring Pb(II) over Cd(II). B. consanguinea showed a higher adsorption capacity than H. involuta, which is attributed to its higher negative zeta potential. This study underscores the novelty of moss biomass for heavy metal removal in wastewater treatment, highlighting its sustainability, effectiveness, cost-efficiency, versatility, and eco-friendliness.

Addressing lanthanum toxicity in plants: Sources, uptake, accumulation, and mitigation strategies

Lanthanum (La), the second most abundant rare earth element (REE) is emerging as an environmental issue, with the potential to impact ecosystems and human health. Major sources of soil contamination by La include agricultural, and industrial activities. Lanthanum is non-essential for plant growth but accumulates in various plant parts. The uptake of La by plants is intricately influenced by various factors such as soil pH, redox potential, cation exchange capacity, presence of organic acids and rhizosphere composition. These factors significantly impact the availability and absorption of La ions. Lanthanum impact on plants depends on soil characteristics, cultivated species, developmental stage, La concentration, treatment period, and growth conditions. Excessive La concentrations affect cell division, DNA structure, nutrient uptake, and photosynthesis and induce toxicity symptoms. Plants employ detoxification mechanisms like vacuolar sequestration, osmolyte synthesis, and antioxidant defense system. However, higher concentrations of La can overwhelm these defense mechanisms, leading to adverse effects on plant growth and development. Further, accumulation of La in plants increases the risk for human exposure. Strategies to mitigate La toxicity are, therefore, vital for ecosystem protection. The application of phytoremediation, supplementation, chelation, amendments, and biosorption techniques contributes to the mitigation of La toxicity. This review provides insights into La sources, uptake, toxicity, and alleviation strategies in plants. Identifying research gaps and discussing advancements aims to foster a holistic understanding and develop effective strategies for protecting plant health and ecosystem resilience against La contamination.

Simultaneous production of biofuel, and removal of heavy metals using marine alga Turbinaria turbinata as a feedstock in NEOM Region, Tabuk

Depletion of fossil fuel and pollution by heavy metals are two major global issues. The cell wall of algae consists of polymers of polysaccharides such as cellulose, hemicellulose, alginate, starch, and many others that are readily hydrolyzed to monosaccharides and hence are amenable to fermentation into bioethanol. Moreover, algae contain lipids that may undergo trans-esterification to biodiesel, and can be absorbed by heavy metals. In this study, extraction of lipids from Turbinaria turbinata (common brown alga) from the beach of Sharma, NEOM, Tabuk, Saudi Arabia by different solvents hexane, methanol, and hexane: methanol (1:1), and trans-esterification was performed to obtain biodiesel and investigated by GC.MS. The alga residue after fats extractions by different solvents was used in bioremediation synthetic wastewater containing 50 ppm of As-3, Co+2, Cu+2, Fe+2, Mn+2, and Zn+2. The residue of defatted alga was hydrolyzed by 2% H2SO4 and then fermented to obtain bioethanol. The combination of hexane: methanol (1:1) gave the greatest amount of petroleum hydrocarbons, which contain Tetradecane, 5-methyl, Octacosane, Pentatriacontane, and a small amount of Cyclotrisiloxane, Hexamethyl. The most effective removal % was obtained with alga residue defatted by hexane: methanol (1:1), and methanol, 100% removal of As-3, 83% Co+2, 95% Cu+2, 97.25% Fe+2, Mn+2 79.69%, Zn+2 90.15% with 2 g alga /L at 3 hours. The lowest value of sugar was obtained with hexane: methanol residue but gave the highest bioethanol efficiency. Thus, it is possible to use Turbinaria turbinata, or brown alga as a feedstock to produce bio-diesel, and bioethanol, and to remove heavy metals from wastewater, which may have a great economic and environmental significance.

Employing algal biomass for fabrication of biofuels subsequent to phytoremediation

An alga belongs to the multi-pertinent group which can add to a significant sector of environment. They show a prevailing gathering of microorganisms for bioremediation due to their significant capacity to inactivate toxic heavy metals. It can easily absorb or neutralize the toxicity of heavy metals from water and soil through phytoremediation. Biosorption is a promising innovation that focuses on novel, modest, and exceptionally successful materials to apply in phytoremediation technology. Furthermore, algal biomass can be used for biofuel generation after phytoremediation using thermochemical or biological transformation processes. The algal components get affected by heavy metals during phytoremediation, but with the help of different techniques, these are yield efficient. The extreme lipid and mineral substances of microalgae have been proven helpful for biofuel manufacturing and worth extra products. Biofuels produced are bio-oil, biodiesel, bioethanol, biogas, etc. The reuse capability of algae can be utilized toward ecological manageability and economic facility. In this review article, the reuse and recycling of algal biomass for biofuel production have been represented. This novel technique has numerous benefits and produces eco-friendly and economically beneficial products.

Innovative method for encapsulating highly pigmented biomass from Aspergillus nidulans mutant for copper ions removal and recovery

Biosorption has been considered a promising technology for the treatment of industrial effluents containing heavy metals. However, the development of a cost-effective technique for biomass immobilization is essential for successful application of biosorption in industrial processes. In this study, a new method of reversible encapsulation of the highly pigmented biomass from Aspergillus nidulans mutant using semipermeable cellulose membrane was developed and the efficiency of the encapsulated biosorbent in the removal and recovery of copper ions was evaluated. Data analysis showed that the pseudo-second-order model better described copper adsorption by encapsulated biosorbent and a good correlation (r2 > 0.96) to the Langmuir isotherm was obtained. The maximum biosorption capacities for the encapsulated biosorbents were higher (333.5 and 116.1 mg g-1 for EB10 and EB30, respectively) than that for free biomass (92.0 mg g-1). SEM-EDXS and FT-IR analysis revealed that several functional groups on fungal biomass were involved in copper adsorption through ion-exchange mechanism. Sorption/desorption experiments showed that the metal recovery efficiency by encapsulated biosorbent remained constant at approximately 70% during five biosorption/desorption cycles. Therefore, this study demonstrated that the new encapsulation method of the fungal biomass using a semipermeable cellulose membrane is efficient for heavy metal ion removal and recovery from aqueous solutions in multiple adsorption-desorption cycles. In addition, this reversible encapsulation method has great potential for application in the treatment of heavy metal contaminated industrial effluents due to its low cost, the possibility of recovering adsorbed ions and the reuse of biosorbent in consecutive biosorption/desorption cycles with high efficiency of metal removal and recovery.

Biosorption of heavy metal ions by green alga Neochloris oleoabundans: Effects of metal ion properties and cell wall structure

Effects of metal ion proprieties and the cell wall structure of green alga Neochloris oleoabundans were investigated on five strategically selected heavy metal ions, Pb(II), Hg(II), Zn(II), Cd(II) and Cu(II). The biosorption of these ions were energy-independent and spontaneous Langmuir adsorption. The adsorption capacities of Pb(II), Hg(II), Zn(II), Cd(II) and Cu(II) were determined to be 1.03, 0.91, 1.20, 0.65 and 1.23 mmol/g, respectively. Data suggest that peptide-containing molecules and non-cellulosic polysaccharides on cell wall were the primary sites of adsorption. Ion Pb(II) showed the strongest inhibitive effects on the adsorption of other metal ions on cells in binaries, corresponding to its large affinity to the biosorbents, which was next only to that of Cu(II). A linear relation was established for the first time between the adsorption capacity and the impact factor, which is defined in this paper as the electronegativity of a metal ion normalized by its atomic radius. In other words, adsorption capacity of N. oleoabundans biomass to the tested two-valence metal ions is proportional to the electronegativity and inversely proportional to the radius of the metal ions. Cell aggregation was caused by the addition of Cu(II), which exhibited distinctive adsorption behaviors than other metal ions.

Effects of Electronegativity and Hydration Energy on the Selective Adsorption of Heavy Metal Ions by Synthetic NaX Zeolite

The adsorption capacity of synthetic NaX zeolite for Pb²⁺, Cd²⁺, Cu²⁺ and Zn²⁺ in single and multi-component systems were investigated. The effects of electronegativity and hydration energy on the selective adsorption, as well as potential selective adsorption mechanism of the NaX zeolite for Pb²⁺, Cd²⁺, Cu²⁺ and Zn²⁺ were also discussed. The maximum adsorption capacity order of the heavy metals in the single system was Pb²⁺ > Cd²⁺ > Cu²⁺ > Zn²⁺, and this could be related to their hydration energy and electronegativity. The values of the separation factors (α) and affinity constant (K_EL) in different binary systems indicated that Pb²⁺ was preferentially adsorbed, and Zn²⁺ presented the lowest affinity for NaX zeolite. The selective adsorption capacities of the metals were in the order, Pb²⁺ > Cd²⁺ ≈ Cu²⁺ > Zn²⁺. The trend for the selective adsorption of NaX zeolite in ternary and quaternary systems was consistent with that in the binary systems. Pb²⁺ and Cu²⁺ reduced the stability of the Si-O-Al bonds and the double six-membered rings in the NaX framework, due to the high electronegativity of Pb²⁺ and Cu²⁺ than that of Al³⁺. The selective adsorption mechanism of NaX zeolite for the high electronegative metal ions could mainly result from the negatively charged O in the Si-O-Al structure of the NaX zeolite, hence heavy metal ions with high electronegativity display a strong affinity for the electron cloud of the oxygen atoms in the Si-O-Al. This study could evaluate the application and efficiency of zeolite in separating and recovering certain metal ions from industrial wastewater.

Bacterial tolerance strategies against lead toxicity and their relevance in bioremediation application

Among heavy metals, lead (Pb) is a non-essential metal having a higher toxicity and without any crucial known biological functions. Being widespread, non-biodegradable and persistent in every sphere of soil, air and water, Pb is responsible for severe health and environmental issues, which need appropriate remediation measures. However, microbes inhabiting Pb-contaminated area are found to have evolved distinctive mechanisms to successfully thrive in the Pb-contaminated environment without exhibiting any negative effects on their growth and metabolism. The defensive strategies used by bacteria to ameliorate the toxic effects of lead comprise biosorption, efflux, production of metal chelators like siderophores and metallothioneins and synthesis of exopolysaccharides, extracellular sequestration and intracellular bioaccumulation. Lead remediation technologies by employing microbes may appear as potential advantageous alternatives to the conventional physical and chemical means due to specificity, suitability for applying in situ condition and feasibility to upgrade by genetic engineering. Developing strategies by designing transgenic bacterial strain having specific metal binding properties and metal chelating proteins or higher metal adsorption ability and using bacterial activity such as incorporating plant growth-promoting rhizobacteria for improved Pb resistance, exopolysaccharide and siderophores and metallothionein-mediated immobilization may prove highly effective for formulating bioremediation vis-a-vis phytoremediation strategies.

Use of algal biorefinery waste and waste office paper in the development of xerogels: A low cost and eco-friendly biosorbent for the effective removal of congo red and Fe (II) from aqueous solutions

The present study investigated the use of algae biorefinery waste and wastepaper in the preparation of cost-effective and eco-friendly xerogels for the removal of congo red (CR) and Fe²⁺. The xerogel properties such as density, swelling degree and porosity were modified by incorporating alginate extracted from the brown seaweed Cystoseira trinodis. The developed biosorbents exhibited a light and porous network structure and were characterized by a fast uptake of CR and Fe²⁺ and adsorption efficiency was increased at pH 6-8. The equilibrium adsorption capacity was found to be 6.20-7.28 mg CR g^-1 biosorbent and 8.08-8.39 mg Fe²⁺ g^-1 biosorbent using different xerogels. The adsorption of CR obeyed first-order kinetics, while, Fe²⁺ followed second-order kinetics. Intraparticle diffusion model suggested a boundary layer effect. The adsorption capacity was maximally obtained as 41.15 mg g^-1 and 169.49 mg g^-1 for CR and Fe²⁺ using wastepaper/Spirulina and wastepaper/alginate/Spirulina xerogel, respectively. Temkin isotherm fitted better to the equilibrium data of CR adsorption than Langmuir and Freundlich models. While, equilibrium data of Fe²⁺ exhibited a best fit to both Langmuir and Freundlich models. Additionally, the Dubinin-Radushkevich isotherm suggested that adsorption mechanism of CR or Fe²⁺ is predominately physisorption. Investigation of thermodynamic parameters such as ΔH° and ΔS° and ΔG° confirmed the feasibility, spontaneity, randomness and endothermic nature of the adsorption process. Electrostatic attraction, H-bonding and n-π interactions were mainly involved in the biosorption process of CR. The results of this study showed that the developed xerogels could be effectively applied for dye and heavy metal removal at low concentrations.

Adsorption of hazardous atoms on the surface of TON zeolite and bilayer silica: a DFT study

In the present study, the adsorption of two types of hazardous atoms including arsenic and lead with TON zeolite and bilayer silica (2D-SiO₂) have been investigated by employing Ab initio-based density functional theory (DFT) calculations. To reach a full structural optimization and the most stable configuration, four sites were considered for TON zeolite as well as five sites for 2D-SiO₂, and adsorption energy along with equilibrium geometry was determined. The adsorption energies of arsenic atom on the surface of 2D-SiO₂ absorbents and TON zeolite have obtained equal to and - 1.25 eV and - 2.76 eV, respectively, which both of them are chemisorption type. We also found that the adsorption of lead on the surface of 2D-SiO2 was physisorption type with the adsorption energy accounting for - 0.13 eV, while the adsorption energy between lead and TON was calculated equal to - 2.32 eV which was chemisorption type. Furthermore, our results demonstrate that the TON zeolite was more capable of adsorbing hazardous atoms compared with 2D-SiO2 due to having greater adsorption energy. The adsorption of arsenic on the 2D-SiO2 and TON adsorbents is also stronger than those of lead atom. Furthermore, we modeled and considered graphene, as a common adsorbent nanostructure, to compare and validate the accuracy of our simulations and obtained results. Finally, the electronic density of states (DOS) calculations and charge analysis were done by the use of Mulliken method, and the results confirmed those results that had already been obtained from adsorption energies. Graphical abstract.

Synthesis of MgO micro-rods coated with charred dextrose and its application for the adsorption of selected heavy metals from synthetic and real groundwater

MgO micro-rods supported on porous carbon were synthesized by an economical method and applied for the adsorption of three different heavy metals ions (As (III), Cd (II) and Pb (II)). Here, we used dextrose as the source of carbon during the synthesis. The synthesized material has been characterized by different techniques like XRD, TEM, FE-SEM, BET and FT-IR for the determination of various physical properties. Compared with MgO synthesized without dextrose, the carbon-supported MgO or C-MgO demonstrated consistent rod-shaped morphology, higher surface area and better absorptivity. The adsorption data were analysed using various isotherm models and the Freundlich isotherm model seemed to provide the best fit to the data. The adsorption kinetics data on the other hand was well explicated by the pseudo second-order kinetic model. The maximum adsorption capacity of C-MgO was 508.47 mg g^-1 for As (III), 566.01 mg g^-1 for Cd (II) and 476.19 mg g^-1 for Pb (II), respectively after 6 h of reaction. To check the real-life usability and efficiency of C-MgO, it was added to a groundwater sample which had 169.55 ppb of As (III) and within 20 min it was adsorbed with 99% efficiency. Reusability studies reveal that C-MgO could be used up to 6 times with more than 60% efficiency. This study shows that C-MgO has high adsorptive ability, is an economic and non-toxic material with versatile applications and can be used for groundwater remediation in real life.

Selective metal removal from chromium-containing synthetic effluents using Shewanella xiamenensis biofilm supported on zeolite

A scheme of selective removal of metal ions from chromium-containing synthetic solutions with the following chemical composition, Cr (VI)-Fe (III), Cr (VI)-Fe (III)-Ni (II), Cr (VI)-Fe (III)-Ni (II)-Zn (II), and Cr (VI)-Fe (III)-Ni (II)-Zn (II)-Cu (II)) by Shewanella xiamenensis biofilm immobilized on a zeolite support, was proposed. Three biological processes, biosorption, bioaccumulation, and longtime bioreduction, were applied for metal removal. The process of Zn (II), Ni (II), and Cu (II) showed to be pH dependent. The maximum removal of Ni (II) was achieved during a 1-hour biosorption process at pH 5.0-6.0, of Zn (II) at pH 5.0, and of Cu (II) at pH 3.0. Chromium (VI) and Fe (III) ions were more efficiently removed by bioaccumulation. Chromium (VI) removal in the studied systems varied from 16.4% to 34.8 and of iron from 55.8 to 94.6%. In a long-term bioreduction experiment, it was possible to achieve complete reduction of Cr (VI) to Cr (III) ions by Shewanella xiamenensis in 42 days and by Shewanella xiamenensis biofilm on zeolite in 35 days. Shewanella oneidensis can be effectively used to remove metal ions from chemically complex effluents.

Biosorption of hexavalent chromium from aqueous solution by polyethyleneimine-modified ultrasonic-assisted acid hydrochar from Sargassum horneri

In this study, an efficient route to synthesizing polyethyleneimine-modified ultrasonic-assisted acid hydrochar (PEI-USAH) is developed and reported. Ultrasonic irradiation technique was used as surface modification method to shorten the crosslinking reaction for hydrochar and polyethyleneimine (PEI). The PEI-USAH showed an excellent adsorption capacity for Cr(VI) from aqueous solution. The physicochemical properties of this PEI-modified adsorbent were comparatively characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller analysis and CNHS analysis. The effects of contact time, initial pH, and biosorbent dose on adsorption capacities were investigated. The batch adsorption experiments showed that PEI-USAH possessed the maximum adsorption capacities of 94.38 mg/g and 330.84 mg/g for initial Cr(VI) concentration of 100 mg/L and 500 mg/L, respectively. Furthermore, this adsorption process could be fitted to Langmuir adsorption and described by the pseudo second order kinetic model. Based on the above findings, PEI-USAH could be used as a potential adsorbent for removal of Cr(VI) from wastewater.

Application of algae for heavy metal adsorption: A 20-year meta-analysis

The use of algae to adsorb heavy metals is an efficient and environmentally friendly treatment for contaminated water and has attracted widespread research attention. In this study, a meta-analysis of the heavy metal adsorption capacity of algae from five different phyla and the factors influencing these capacities was conducted. Phaeophyta was found to have a high heavy metal adsorption capacity, whereas Bacillariophyta had a relatively low adsorption capacity; Chlorophyta, Rhodophyta, and Cyanophyta had moderate adsorption capacities. Non-living algae were more effective in practical applications than living algae were. Algal biomass had a relatively high adsorption efficiency of 1-10 g/L, which did not increase significantly when algal concentration increased. The algal adsorption efficiency for initial heavy metal concentrations of 10-100 mg/L was higher than for concentrations of greater than 100 mg/L. The results further show that algal adsorption of heavy metals reached a maximum capacity of 80-90% within 20 min. Heavy metal adsorption by algae was not temperature-dependent, and it was more effective in moderately to weakly acidic environments (pH = 4-7.5). Considering these aspects for practical applications, algae from some phyla can effectively be used for heavy metal biosorption in contaminated water.

Bacterial resistance to lead: Chemical basis and environmental relevance

Natural bacterial isolates from heavily contaminated sites may evolve diverse tolerance strategies, including biosorption, efflux mechanism, and intracellular precipitation under the continually increased stress of toxic lead (Pb) from anthropogenic activities. These strategies utilize a large variety of functional groups in biological macromolecules (e.g., exopolysaccharides (EPSs) and metalloproteins) and inorganic ligands, including carboxyl, phosphate and amide groups, for capturing Pb. The amount and type of binding sites carried by biologically originated materials essentially determines their performance and potential for Pb removal and remediation. Many factors, e.g., metal ion radius, electronegativity, the shape of the cell surface sheath, temperature and pH, are thought to exert significant influences on the abovementioned interactions with Pb. Conclusively, understanding the chemical basis of Pb-binding in these bacteria can allow for the development of effective microbial Pb remediation technologies and further elucidation of Pb cycling in the environment.

Adsorption behaviours and mechanisms of heavy metal ions' impact on municipal waste composts with different degree of maturity

Composting may change the adsorption characteristics and mechanisms of organic materials due to their differences in organic chemical functional groups and surface structures. The adsorption properties of heavy metals onto the municipal solid waste compost (MSW-C) and its secondary fermentation form (MSW-SC) were comparatively investigated in single, binary and multiple solutions by batch experiments. In the single-metal system, the maximum adsorption capacities of Cu, Zn, Cd and Ni onto MSW-SC were 29.2, 26.3, 38.1 and 22.0 mg g^-1, respectively, and showed higher than that of MSW-C. The adsorption fitted best with the pseudo-second-order kinetics and Langmuir isotherms. The competitive adsorption results indicated that the composts exhibited good selectivity in the adsorption of Cu over Cd, Zn and Ni; thus, for the quaternary-metal systems, the adsorption sequence was Cu > Zn > Cd > Ni. Humic acid content, cation exchange capacity and surface area were increased following the secondary composting. FTIR analysis indicated amine and aromatic compounds were main binding sites accounting for metal sorption. SEM-EDX analysis suggested that the MSW-SC had rough surfaces and stronger adsorption capacity. Decreasing percentage of exchangeable metals was found in the metal-loaded MSW-SC based on a speciation analysis. This study highlights the interactive impacts of different metals during adsorption by compost with different maturity, the secondary composting process was a multifunctional improvement of sorption characteristics and MSW-SC was developed to be a highly efficient biosorbent.

Selective heavy metal removal and water purification by microfluidically-generated chitosan microspheres: Characteristics, modeling and application

Many industrial wastewater streams contain heavy metals, posing serious and irreversible damage to humans and living organisms, even at low concentrations due to their high toxicity and persistence in the environment. In this study, high-performance monodispersed chitosan (CS) microspheres were prepared using a simple microfluidic method and evaluated for metal removal from contaminated water. Batch experiments were carried out to evaluate the adsorption characteristics for the removal of copper ions, one representative heavy metal, from aqueous solutions. The inherent advantages of microfluidics enabled a precise control of particle size (CV = 2.3%), while exhibiting outstanding selectivity towards target ions (adsorption capacity 75.52 mg g^-1) and fair regeneration (re-adsorption efficiency 74% after 5 cycles). An integrated adsorption mechanism analytic system was developed based on different adsorption kinetics and isotherms models, providing an excellent adsorption prediction model with pseudo-second order kinetics (R² = 0.999), while the isotherm was fitted best to the Langmuir model (R² = 0.998). The multi-step adsorption process was revealed via quantitative measurements and schematically described. Selective adsorption performance of CS microspheres in the present of other competitive metal ions with different valence states has been demonstrated and studied by both experimental and density functional theory (DFT) analysis.

Multiplexed electrochemical immunoassay for two immunoglobulin proteins based on Cd and Cu nanocrystals

Herein, a simple and feasible electrochemical immunosensing method for simultaneous voltammetric detection of two immunoglobulin proteins, human IgG (HIgG) and rabbit IgG (RIgG), was developed using two distinguishable signal-generation tags on the same electrode. The immunosensor was prepared by immobilizing two Fab antibody fragments on a gold electrode. After this, Cu and Cd nanocrystals, as nanotags, were synthesized and functionalized with identical detection antibodies. Transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR) were employed to characterize the Cu and Cd nanocrystals. The covalently modified electrode with the Fab antibody fragments through the Au-thiolate bond (to dispel the non-specific adsorption) was investigated via scanning electron microscopy (SEM). After the sandwiched immunoreaction, the antibody-modified nanocrystals were captured on the immunosensor, which could be interrogated in pH 3.5 HCl using square-wave anodic stripping voltammetry. Experimental results also indicated that the multiplexed immunoassay enabled the simultaneous detection of HIgG and RIgG in a single run with the similar linear range from 0.01 to 10 ng mL^-1, and the limits of detection (LODs) towards two analytes could be as low as 3.4 pg mL^-1 (at 3σ). Acceptable assay results on precision, reproducibility, specificity, and method accuracy were also acquired. Importantly, the newly designed strategy avoided cross-talk and enzymatic introduction as compared to conventional electrochemical immunoassays, thus exhibiting a promising potential in clinical applications.

Effects of wood vinegar on properties and mechanism of heavy metal competitive adsorption on secondary fermentation based composts

In this study, secondary municipal solid waste composts (SC) and wood vinegar treated secondary compost (WV-SC) was prepared to investigate the capability for single-heavy metals and multi-metal systems adsorption. The adsorption sequence of WV-SC for the maximum single metals sorption capacities was Cd (42.7mgg^-1) > Cu (38.6mgg^-1) > Zn (34.9mgg^-1) > Ni (28.7mgg^-1) and showed higher than that of SC adsorption isotherm. In binary/quaternary-metal systems, Ni adsorption showed a stronger inhibitory effect compared with Zn, Cd and Cu on both SC and WV-SC. According to Freundlich and Langmuir adsorption isotherm models, as well as desorption behaviors and speciation analysis of heavy metals, competitive adsorption behaviors were differed from single-metal adsorption. Especially, the three-dimensional simulation of competitive adsorption indicated that the Ni was easily exchanged and desorbed. The amount of exchangeable heavy metal fraction were in the lowest level for the metal-loaded adsorbents, composting treated by wood vinegar improved the adsorbed metals converted to the residue fraction. This was an essential start in estimating the multiple heavy metal adsorption behaviors of secondary composts, the results proved that wood vinegar was an effective additive to improve the composts quality and decrease the metal toxicity.

Evaluation of Mn bioaccumulation and biosorption by bacteria isolated from spent nuclear fuel pools using 54Mn as a radioindicator

Bioaccumulation and biosorption characteristics of Mn2+ions by both dead and living, non-growing biomass of Gram-positive bacteriaKocuria palustrisandMicrococcus luteusisolated from spent nuclear fuel pools were compared. The radioindicator method using radionuclide54Mn was applied to obtain precise and reliable data characterizing both processes as well as manganese distribution in bacterial cells. Manganese was mainly found on the surface (biosorption) of live cells of both bacteria and surface sorption capacity increased with Mn concentration in solution. Only 10.0% (M. luteus) and 6.3% (K. palustris) of uptaken Mn were localized in the cytoplasm (bioaccumulation). Biosorption of Mn by dead bacterial biomass was a rapid process strongly affected by solution pH. Maximum sorption capacitiesQmaxcalculated from the Langmuir isotherm and characterizing Mn binding represented 316±15 μmol/g forM. luteusand 282±16 μmol/g forK. palustris.Results indicate that living, non-growing cells showed a higher efficiency of Mn removal than dead biomass. Based on FTIR spectra examination with aim to characterize the surface ofK. palustrisandM. luteuscells, we confirmed that the phosphate and carboxyl functional groups are involved in manganese sorption onto cell surface by both live and dead bacterial biomass.

Potential use of algae for heavy metal bioremediation, a critical review

Algae have several industrial applications that can lower the cost of biofuel co-production. Among these co-production applications, environmental and wastewater bioremediation are increasingly important. Heavy metal pollution and its implications for public health and the environment have led to increased interest in developing environmental biotechnology approaches. We review the potential for algal biosorption and/or neutralization of the toxic effects of heavy metal ions, primarily focusing on their cellular structure, pretreatment, modification, as well as potential application of genetic engineering in biosorption performance. We evaluate pretreatment, immobilization, and factors affecting biosorption capacity, such as initial metal ion concentration, biomass concentration, initial pH, time, temperature, and interference of multi metal ions and introduce molecular tools to develop engineered algal strains with higher biosorption capacity and selectivity. We conclude that consideration of these parameters can lead to the development of low-cost micro and macroalgae cultivation with high bioremediation potential.

Competitive sorption of Pb(II), Cu(II) and Ni(II) on carbonaceous nanofibers: A spectroscopic and modeling approach

The competitive sorption of Pb(II), Cu(II) and Ni(II) on the uniform carbonaceous nanofibers (CNFs) was investigated in binary/ternary-metal systems. The pH-dependent sorption of Pb(II), Cu(II) and Ni(II) on CNFs was independent of ionic strength, indicating that inner-sphere surface complexation dominated sorption Pb(II), Cu(II) and Ni(II) on CNFs. The maximum sorption capacities of Pb(II), Cu(II) and Ni(II) on CNFs in single-metal systems at a pH 5.5±0.2 and 25±1°C were 3.84 (795.65mg/g), 3.21 (204.00mg/g) and 2.67 (156.70mg/g)mmol/g, respectively. In equimolar binary/ternary-metal systems, Pb(II) exhibited greater inhibition of the sorption of Cu(II) and Ni(II), demonstrating the stronger affinity of CNFs for Pb(II). The competitive sorption of heavy metals in ternary-metal systems was predicted quite well by surface complexation modeling derived from single-metal data. According to FTIR, XPS and EXAFS analyses, Pb(II), Cu(II) and Ni(II) were specifically adsorbed on CNFs via covalent bonding. These observations should provide an essential start in simultaneous removal of multiple heavy metals from aquatic environments by CNFs, and open the doorways for the application of CNFs.

Surface Modification of Naturally Available Biomass for Enhancement of Heavy Metal Removal Efficiency, Upscaling Prospects, and Management Aspects of Spent Biosorbents: A Review

Heavy metal pollution in water emerges as a severe socio-environmental problem originating primarily from the discharge of industrial wastewater. In view of the toxic, non-biodegradable, and persistent nature of most of the heavy metal ions, remediation of such components becomes an absolute necessity. Biosorption is an emerging tool for bioremediation that has gained momentum for employing low-cost biological materials with effective metal binding capacities. Even though biological materials possess excellent metal adsorption abilities, they show poor mechanical strength and low rigidity. Other disadvantages include solid-liquid separation problems, possible biomass swelling, lower efficiency for regeneration or reuse, and frequent development of high pressure drop in the column mode that limits its applications under real conditions. To improve the biosorption efficiency, biomasses need to be modified with a simple technique for selective/multi-metal adsorption. This review is intended to cover discussion on biomass modification for enhanced biosorption efficiency, mechanism studies using various instrumental/analytical techniques, and future direction for research and development including the fate of spent biosorbent. In most of the previously published researches, difficulty of the process in scaling up has not been addressed. The current article outlines the application potential of biosorbents in the development of hybrid technology integrated with membrane processes for water and wastewater treatment in industrial scale.

Biosorption of Cu(II) by immobilized microalgae using silica: kinetic, equilibrium, and thermodynamic study

Immobilized microalgae using silica (IMS) from Micractinium reisseri KGE33 was synthesized through a sol-gel reaction. Green algal waste biomass, the residue of M. reisseri KGE33 after oil extraction, was used as the biomaterial. The adsorption of Cu(II) on IMS was tested in batch experiments with varying algal doses, pH, contact times, initial Cu(II) concentrations, and temperatures. Three types of IMSs (IMS 14, 70, and 100) were synthesized according to different algal doses. The removal efficiency of Cu(II) in the aqueous phase was in the following order: IMS 14 (77.0%) < IMS 70 (83.3%) < IMS 100 (87.1%) at pH 5. The point of zero charge (PZC) value of IMS100 was 4.5, and the optimum pH for Cu(II) adsorption was 5. Equilibrium data were described using a Langmuir isotherm model. The Langmuir model maximum Cu(II) adsorption capacity (q m) increased with the algal dose in the following order: IMS 100 (1.710 mg g(-1)) > IMS 70 (1.548 mg g(-1)) > IMS 14 (1.282 mg g(-1)). The pseudo-second-order equation fitted the kinetics data well, and the value of the second-order rate constant increased with increasing algal dose. Gibbs free energies (ΔG°) were negative within the temperature range studied, which indicates that the adsorption process was spontaneous. The negative value of enthalpy (ΔH°) again indicates the exothermic nature of the adsorption process. In addition, SEM-energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared (FT-IR), and X-ray photoelectron spectroscopy (XPS) analyses of the IMS surface reveal that the algal biomass on IMS is the main site for Cu(II) binding. This study shows that immobilized microalgae using silica, a synthesized biosorbent, can be used as a cost-effective sorbent for Cu(II) removal from the aqueous phase.

Removal of heavy metals from aqueous phases using chemically modified waste Lyocell fiber

In this study, an outstanding performance of chemically modified waste Lyocell for heavy metals treatment is reported. The sorbent, which was prepared by a simple and concise method, was able to bind heavy metals such as Pb(II), Cu(II) and Cd(II), with very high efficiencies. The binding mechanisms were studied through adsorption and standard characterization tests such as scanning electron microscopy, energy-dispersive spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction analyses. Adsorption kinetics was very fast and attained equilibrium within 5 min in all metals studied. The maximum single metal uptakes were 531.29±0.28 mg/g, 505.64±0.21 mg/g, and 123.08±0.26 mg/g for Pb(II), Cd(II) and Cu(II), respectively. In ternary metal systems, Cu(II) selectivity was observed and the underlying factors were discussed. The sorbent by its nature, could be very effective in treating large volumes of wastewater with the contact of very little amount.

A novel tetraethylenepentamine functionalized polymeric adsorbent for enhanced removal and selective recovery of heavy metal ions from saline solutions

A novel tetraethylenepentamine functionalized polymeric adsorbent with polymethacrylate–divinylbenzene as the substrate was facilely prepared for the enhanced removal and selective recovery of Cu(ii) and Ni(ii) from saline solutions.

Separation of Cd(ii) and Ni(ii) in a binary mixture through competitive adsorption and acid leaching

Different heavy metals present simultaneously in aqueous solutions should be separated to promote environmental protection.