Synthesis of Branched Methyl Hydroxy Stearates Including an Ester from Bio-Based Levulinic Acid

Synthetic Routes for Designing Furanic and Non Furanic Biobased Surfactants from 5-Hydroxymethylfurfural

5-hydroxymethylfurfural (HMF) is one of the most valuable biomass platform molecules, enabling the construction of a plethora of high value-added furanic compounds. In particular, in the last decade, HMF has been considered as a starting material for designing biobased surfactants, not only because of its renewability and carbon footprint, but also because of its enhanced biodegradability. This Review presents recent examples of the different approaches to link the hydrophilic and lipophilic moieties into the hydrophobic furan (and tetrahydrofuran) ring, giving a variety of biobased surfactants that have been classified here according to the charge of the head polar group. Moreover, strategies for the synthesis of different non-furanic structures surfactant molecules (such as levulinic acid, cyclopentanols, and aromatics) derived from HMF are described. The new HMF-based amphiphilic molecules presented here cover a wide range of hydrophilic-lipophilic balance values and have suitable surfactant properties such as surface tension activity and critical micelle concentration, to be an important alternative for the replacement of non-sustainable surfactants.

Preparation of functionalized castor oil derivatives with tunable physical properties using heterogeneous acid and base catalysts

Functionalized castor oil derivatives are achieved from epoxidized castor oil through ring opening and transesterification reactions using heterogeneous catalysts.

Controlling viscosity in methyl oleate derivatives through functional group design

The effect of molecular structure on commercially relevant lubrication properties is elucidated in a set of 16 renewable oleate derivatives.

Synthesis and optimization ring opening of monoepoxide linoleic acid using p-toluenesulfonic acid

Biolubricant base oils, 9,12-hydroxy-10,13-oleioxy-12-octadecanoic acid (HYOOA) was synthesized based on the esterification reaction of Monoepoxide linoleic acid 9(12)-10(13)-monoepoxy 12(9)-octadecanoic acid (MEOA) with oleic acid (OA) and catalyzed by p-Toluenesulfonic acid. The optimum conditions for the experiment using D-optimal design to obtain high yield% of 84.61, conversion% of 83.54 and lowest OOC% of 0.05 were predicted at OA/MEOA ratio of 0.2:1 (mol/mol), PTSA/MEOA ratio of 0.4:1 (mol/mol), reaction temperature at 110°C, and reaction time at 4.5 h. The FTIR peaks of HYOOA indicate the disappearance of the absorption band at 820 cm(-1), which belongs to the oxirane ring. (13)C and (1)H NMR spectra analyses confirmed the result of HYOOA with appearance carbon-ester (C = O) chemical shift at 174.1 ppm and at 4.06 ppm for (13)C and (1)H NMR respectively.

Production of chemoenzymatic catalyzed monoepoxide biolubricant: optimization and physicochemical characteristics

Linoleic acid (LA) is converted to per-carboxylic acid catalyzed by an immobilized lipase from Candida antarctica (Novozym 435). This per-carboxylic acid is only intermediate and epoxidized itself in good yields and almost without consecutive reactions. Monoepoxide linoleic acid 9(12)-10(13)-monoepoxy 12(9)-octadecanoic acid (MEOA) was optimized using D-optimal design. At optimum conditions, higher yield% (82.14) and medium oxirane oxygen content (OOC) (4.91%) of MEOA were predicted at 15 μL of H(2)O(2), 120 mg of Novozym 435, and 7 h of reaction time. In order to develop better-quality biolubricants, pour point (PP), flash point (FP), viscosity index (VI), and oxidative stability (OT) were determined for LA and MEOA. The results showed that MEOA exhibited good low-temperature behavior with PP of -41(°)C. FP of MEOA increased to 128(°)C comparing with 115(°)C of LA. In a similar fashion, VI for LA was 224 generally several hundred centistokes (cSt) more viscous than MEOA 130.8. The ability of a substance to resist oxidative degradation is another important property for biolubricants. Therefore, LA and MEOA were screened to measure their OT which was observed at 189 and 168(°)C, respectively.

Diesters Biolubricant Base Oil: Synthesis, Optimization, Characterization, and Physicochemical Characteristics

Diesters biolubricant base oil, oleyl 9(12)-hydroxy-10(13)-oleioxy-12(9)-octadecanoate (OLHYOOD) was synthesized based on the esterification reaction of 9,12-hydroxy-10,13-oleioxy-12-octadecanoic acid (HYOOA) with oleyl alcohol (OL) and catalyzed by sulfuric acid (SA). Optimum conditions of the experiment to obtain high yield % of OLHYOOD were predicted at ratio of OL/HYOOA of 2 : 1 mol/mol, ratio of SA/HYOOA of 0.7 : 1 mol/mol, reaction temperature 110°C, and 7 h of reaction time. At this condition, the yield of OLHYOOD was 88.7%. Disappearance of carboxylic acid (C=O) peak has been observed by FTIR with appearance of ester (C=O) peak at 1738 cm-1.13C, and1H NMR spectra analyses confirmed the result of OLHYOOD with the appearance of carbon-ester (C=O) chemical shift at 173.93 ppm and at 4.05 ppm for13C and1H NMR, respectively. The physicochemical characteristics of the OLHYOOD were also determined, which showed improved low temperature properties (PP) −62°C, viscosity index (VI) at 192 and also increased oxidative stability (OT) up to 215.24°C.

Improvement of physicochemical characteristics of monoepoxide linoleic acid ring opening for biolubricant base oil

For environmental reasons, a new class of environmentally acceptable and renewable biolubricant based on vegetable oils is available. In this study, oxirane ring opening reaction of monoepoxide linoleic acid (MEOA) was done by nucleophilic addition of oleic acid (OA) with using p-toluene sulfonic acid (PTSA) as a catalyst for synthesis of 9(12)-hydroxy-10(13)-oleoxy-12(9)-octadecanoic acid (HYOOA) and the physicochemical properties of the resulted HYOOA are reported to be used as biolubricant base oils. Optimum conditions of the experiment using D-optimal design to obtain high yield% of HYOOA and lowest OOC% were predicted at OA/MEOA ratio of 0.30 : 1 (w/w), PTSA/MEOA ratio of 0.50 : 1 (w/w), reaction temperature at 110°C, and reaction time at 4.5 h. The results showed that an increase in the chain length of the midchain ester resulted in the decrease of pour point (PP) −51°C, increase of viscosity index (VI) up to 153, and improvement in oxidative stability (OT) to 180.94°C.

Conversion of biomass to selected chemical products

This critical review provides a survey illustrated by recent references of different strategies to achieve a sustainable conversion of biomass to bioproducts. Because of the huge number of chemical products that can be potentially manufactured, a selection of starting materials and targeted chemicals has been done. Also, thermochemical conversion processes such as biomass pyrolysis or gasification as well as the synthesis of biofuels were not considered. The synthesis of chemicals by conversion of platform molecules obtained by depolymerisation and fermentation of biopolymers is presently the most widely envisioned approach. Successful catalytic conversion of these building blocks into intermediates, specialties and fine chemicals will be examined. However, the platform molecule value chain is in competition with well-optimised, cost-effective synthesis routes from fossil resources to produce chemicals that have already a market. The literature covering alternative value chains whereby biopolymers are converted in one or few steps to functional materials will be analysed. This approach which does not require the use of isolated, pure chemicals is well adapted to produce high tonnage products, such as paper additives, paints, resins, foams, surfactants, lubricants, and plasticisers. Another objective of the review was to examine critically the green character of conversion processes because using renewables as raw materials does not exempt from abiding by green chemistry principles (368 references).

Preparation of acetonides from soybean oil, methyl soyate, and fatty esters

This paper describes the preparation of a new type of branched vegetable oil and its methyl ester that involves the formation of acetonides. A facile and environmentally friendly synthesis has been found to produce acetonides that entails the use of ferric chloride as a catalyst and is conducted at room temperature. The products have been fully characterized with the help of model compounds, including elemental analysis, infrared (IR) spectroscopy, nuclear magnetic resonance (NMR), and gas chromatography-mass spectrometry (GC-MS).

Green waxes, adhesives and lubricants

General characteristics of waxes, adhesives and lubricants as well as the recent fundamental investigations on their physical and mechanical behaviour are introduced. The current R&D status for new type/generation of waxes, adhesives and lubricants from natural products is reviewed, with an emphasis on their tribological applications. In particular, some crucial issues and challenges relating to technological improvement and materials development are discussed. Based on the current predicted shortage of energy resources and environmental concerns, prospective research on the development of green waxes, adhesives and lubricants is suggested.

Lubricant base stock potential of chemically modified vegetable oils

The environment must be protected against pollution caused by lubricants based on petroleum oils. The pollution problem is so severe that approximately 50% of all lubricants sold worldwide end up in the environment via volatility, spills, or total loss applications. This threat to the environment can be avoided by either preventing undesirable losses, reclaiming and recycling mineral oil lubricants, or using environmentally friendly lubricants. Vegetable oils are recognized as rapidly biodegradable and are thus promising candidates as base fluids in environment friendly lubricants. Lubricants based on vegetable oils display excellent tribological properties, high viscosity indices, and flash points. To compete with mineral-oil-based lubricants, some of their inherent disadvantages, such as poor oxidation and low-temperature stability, must be corrected. One way to address these problems is chemical modification of vegetable oils at the sites of unsaturation. After a one-step chemical modification, the chemically modified soybean oil derivatives were studied for thermo-oxidative stability using pressurized differential scanning calorimetry and a thin-film micro-oxidation test, low-temperature fluid properties using pour-point measurements, and friction-wear properties using four-ball and ball-on-disk configurations. The lubricants formulated with chemically modified soybean oil derivatives exhibit superior low-temperature flow properties, improved thermo-oxidative stability, and better friction and wear properties. The chemically modified soybean oil derivatives having diester substitution at the sites of unsaturation have potential in the formulation of industrial lubricants.

Ester hydroxy derivatives of methyl oleate: tribological, oxidation and low temperature properties

Five branched oleochemicals were prepared from commercially available methyl oleate and common organic acids; and their lubricant properties were determined. These branched oleochemicals are characterized as 9(10)-hydroxy-10(9)-ester derivatives of methyl oleate. These derivatives show improved low temperature properties, over olefinic oleochemicals, as determined by pour point and cloud point measurements. The derivatization also increased thermo-oxidative stability, measured using both pressurized differential scanning calorimetry (PDSC) and thin film micro oxidation (TFMO) methods. Branched oleochemicals were used as additives both in soybean oil and in polyalphaolefin. Their lubrication enhancement was evaluated by both four-ball and ball-on-disk wear determinations. These derivatives have good anti-wear and friction-reducing properties at relatively low concentrations, under all test loads. Their surface tensions were also determined and a trend was observed. The materials with larger side chain branches had lower surface tension than those containing smaller side chain branches. An exception to this trend was found when studying the compound with the carbonyl containing levulinic acid side chain, which had the highest surface tension of the branched oleochemicals studied. Overall, the data indicate that some of these derivatives have significant potential as a lubricating oil or fuel additives.