Synthesis, Characterization, and Activity Evaluation of DyVO4/g-C3N4 Composites under Visible-Light Irradiation

A comparison increasing the photodegradation power of a Ag/g-C3N4 /CoNi-LDH nanocomposite: Photocatalytic activity toward water treatment

For environmental applications, it is crucial to rationally design and synthesize photocatalysts with positive exciton splitting and interfacial charge transfer. Here, a novel Ag-bridged dual Z-scheme Ag/g-C3N4/CoNi-LDH plasmonic heterojunction was successfully synthesized using a simple method, with the goal of overcoming the common drawbacks of traditional photocatalysts such as weak photoresponsivity, rapid combination of photo-generated carriers, and unstable structure. These materials were characterized by XRD, FT-IR, SEM, TEM UV-Vis/DRS, and XPS to verify the structure and stability of the heterostructure. The pristine LDH, g-C3N4, and Ag/g-C3N4/CoNi-LDH composite were investigated as photocatalysts for water remediation, an environmentally motivated process. Specifically, the photocatalytic degradation of tetracycline was studied as a model reaction. The performance of the supports and composite catalyst were determined by evaluating both the degradation and adsorption phenomenon. The influence of several experimental parameters such as catalyst loading, pH, and tetracycline concentration were evaluated. The current study provides important data for water treatment and similar environmental protection applications.

Environment Friendly g-C3N4-Based Catalysts and Their Recent Strategy in Organic Transformations

Organic molecules synthesized in an environmentally friendly manner have excellent therapeutic potential. The entire preparation technique was examined in the existence of a light source, implying that light has been replaced by heating and the usage of dangerous chemicals has decreased, resulting in less pollution of the environment. The advantages of these nanocarbon catalysts include high efficiency, environmentally friendly synthesis, eco-friendly, inexpensive, and non-corrodible. In organic transformations, solid metal base/metal-free catalysts produce better results. Here, the metal-free semiconductor g-C₃N₄ was used to demonstrate the catalytic behavior of organic conversions. g-C₃N₄ is a two-dimensional material and a p‑type semiconductor to enhance the photocatalytic activity. The excellent properties of g-C₃N₄ sheet lead to the support of metals to form metal-organic frameworks. Most of the reactions gained positive response under visible light irradiation. This review will inspire readers in widen the applications of g-C₃N₄ based catalyst in various organic transformation reactions.

Photocatalytic Activity of Ti-SBA-15/C3N4 for Degradation of 2,4-Dichlorophenoxyacetic Acid in Water under Visible Light

In the present study, the photocatalytic activity of Ti-SBA-15/C3N4 catalysts was investigated to degrade 2,4-Dichlorophenoxyacetic acid (2,4-D) herbicides in water under visible light irradiation. The catalysts were synthesized via a simple hydrothermal method and characterized by various analytical techniques, including SAXS, N2 adsorption-desorption isotherms, Zeta potential, PL, FT-IR, XRF, TGA, and UV-DRS. Our study indicated that the 2.5Ti-SBA-15/C3N4 had higher efficiency in the degradation of 2,4-D than Ti-SBA-15 and C3N4. The decomposition of 2,4-D reached 60% under 180 minutes of visible light irradiation at room temperature on 2.5Ti-SBA-15/C3N4. Moreover, the degradation of 2,4-D on Ti-SBA-15/C3N4 was pseudo-first-order kinetics with the highest rate constant (0.00484 min-1), which was much higher than that obtained for other photocatalysts reported recently. Furthermore, the catalyst can be reused at least two times for photodegradation of 2,4-D solution under visible light irradiation within a slight decrease in catalytic activity.

Photocatalytic inactivation and destruction of harmful microalgae Karenia mikimotoi under visible-light irradiation: Insights into physiological response and toxicity assessment

Harmful algal blooms (HABs) caused by Karenia mikimotoi have frequently happened in coastal waters worldwide, causing serious damages to marine ecosystems and economic losses. Photocatalysis has potential to in-situ inhibit algal growth using sustainable sunlight. However, the inactivation and detoxification mechanisms of microalgae in marine environment have not been systematically investigated. In this work, for the first time, visible-light-driven photocatalytic inactivation of K. mikimotoi was attempted using g-C₃N₄/TiO₂ immobilized films as a model photocatalyst. The inactivation efficiency could reach 64% within 60 min, evaluated by real-time in vivo chlorophyll-a fluorometric method. The immobilized photocatalyst films also exhibited excellent photo-stability and recyclability. Mechanisms study indicated photo-generated h⁺ and ¹O₂ were the dominant reactive species. Algal cell rupture process was monitored by fluorescent microscope combined with SEM observation, which confirmed the damage of cell membrane followed by the leakage of the intracellular components including the entire cell nucleus. The physiological responses regarding up-regulation of antioxidant enzyme activity (i.e. CAT and SOD), intracellular ROSs level and lipid peroxidation were all observed. Moreover, the intracellular release profile and acute toxicity assessment indicated the toxic K. mikimotoi was successfully detoxified, and the released organic matter had no cytotoxicity. This work not only provides a potential new strategy for in-situ treatment of K. mikimotoi using sunlight at sea environments, but also creates avenue for understanding the inactivation and destruction mechanisms of marine microalgae treated by photocatalysis and the toxicity impacts on the marine environments.

Experimental study on bone defect repair by BMSCs combined with a light-sensitive material: g-C3N4/rGO

Bone marrow mesenchymal stem cells (BMSCs), as seed cells, have played an important role in bone defect repair. However, efficiently amplifying and inducing BMSCs in vitro or vivo remains an urgent problem to be solved. Electrical stimulation has been beneficial to the proliferation and differentiation of BMSCs, but current electrical stimulation methods have a critical disadvantage in that they usually burn the skin. g-C₃N₄/rGO, a new photosensitive material, can produce photocurrent under natural light irradiation, thus reducing energy consumption. Our purpose was to explore whether this photocurrent can promote the proliferation and differentiation of BMSCs. g-C₃N₄/rGO synthesised under high temperature and pressure had negligible cytotoxicity as confirmed by methyl thiazolyl tetrazolium to BMSCs. Better osteogenesis was found in the blue light material group than in the light-shielding material group, exhibited by alizarin red staining, alkaline phosphatase activity, Western-Blot, and RT-qPCR. Animal experiments showed that the bone repair potential of the material group was significantly higher than that of the non-material group. Overall, we conclude that g-C₃N₄/rGO is a new non-toxic photosensitive material which can rapidly induce BMSCs into osteoblasts, accelerating bone regeneration and providing us with a feasible method of rapid bone repair.

In situ preparation of g-C3N4/Bi4O5I2 complex and its elevated photoactivity in Methyl Orange degradation under visible light

A graphite carbon nitride (g-C₃N₄) modified Bi₄O₅I₂ composite was successfully prepared in-situ via the thermal treatment of a g-C₃N₄/BiOI precursor at 400°C for 3 hr. The as-prepared g-C₃N₄/Bi₄O₅I₂ showed high photocatalytic performance in Methyl Orange (MO) degradation under visible light. The best sample presented a degradation rate of 0.164 min^-1, which is 3.2 and 82 times as high as that of Bi₄O₅I₂ and g-C₃N₄, respectively. The g-C₃N₄/Bi₄O₅I₂ was characterized by X-ray powder diffractometer (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman, X-ray photoelectron spectroscopy (XPS), ultraviolet-visible diffuse reflectance spectra (DRS), electrochemical impedance spectroscopy (EIS) and transient photocurrent response in order to explain the enhanced photoactivity. Results indicated that the decoration with a small amount of g-C₃N₄ influenced the specific surface area only slightly. Nevertheless, the capability for absorbing visible light was improved measurably, which was beneficial to the MO degradation. On top of that, a strong interaction between g-C₃N₄ and Bi₄O₅I₂ was detected. This interplay promoted the formation of a favorable heterojunction structure and thereby enhanced the charge separation. Thus, the g-C₃N₄/Bi₄O₅I₂ composite presented greater charge separation efficiency and much better photocatalytic performance than Bi₄O₅I₂. Additionally, g-C₃N₄/Bi₄O₅I₂ also presented high stability. •O₂^- and holes were verified to be the main reactive species.

Palladium Nanoparticles/Graphitic Carbon Nitride Nanosheets-Carbon Nanotubes as a Catalytic Amplification Platform for the Selective Determination of 17α-ethinylestradiol in Feedstuffs

A new kind of nanocomposite, graphitic carbon nitride (g-C₃N₄)-carbon nanotubes (CNTs), has been synthesized via solid grinding, and followed by thermal polymerization process of melamine and CNTs. Pd nanoparticles were loaded on the as-prepared nanocomposite by the self-assembly method. The Pd/g-C₃N₄-CNTs nanocomposite exhibited excellent electrocatalytic activity toward the oxidation of 17α-ethinylestradiol (EE2), and compared with other detection methods of EE2, such as HPLC, this detection platform does not need the samples for further purification processing. And this detection platform was compared with HPLC, there is no significant difference between two methods, and the accuracy and precision of the determination of EE2 in feedstuff sample by differential pulse voltammetry (DPV) to a satisfactory level. Thus, the Pd/g-C₃N₄-CNTs nanocomposite can be used as a signal amplification platform for the detection of EE2 in feedstuffs samples. Under the optimum condition, the current response increased linearly with EE2 concentration from 2.0 × 10⁻⁶ ~ 1.5 × 10⁻⁴ M with a detection limit of 5.0 × 10⁻⁷ M (S/N = 3) by DPV. The Pd/g-C₃N₄-CNTs showed good reproducibility and excellent anti-interference ability that the relative standard deviation was 3.3% (n = 5). This strategy may find widespread and promising applications in other sensing systems involving EE2.

An inverse opal TiO2/g-C3N4 composite with a heterojunction for enhanced visible light-driven photocatalytic activity

An inverse opal TiO₂/g-C₃N₄ composite with excellent photogenerated electron–hole separation efficiency and enhanced visible light absorption efficiency was constructed.

Graphitic carbon nitride based nanocomposites for the photocatalysis of organic contaminants under visible irradiation: Progress, limitations and future directions

Graphitic carbon nitride (g-C₃N₄) has drawn great attention recently because of its visible light response, suitable energy band gap, good redox ability, and metal-free nature. g-C₃N₄ can absorb visible light directly, therefore has better photocatalytic ability under solar irradiation and is more energy-efficient than TiO₂. However, pure g-C₃N₄ still has the drawbacks of insufficient light absorption, small surface area and fast recombination of photogenerated electron and hole pairs. This review summarizes the recent progress in the development of g-C₃N₄ nanocomposites to photodegrade organic contaminants in water. Element doping especially by potassium has been reported to be an efficient method to promote the degradation efficacy. In addition, compound doping improves photodegradation performance of g-C₃N₄, especially Ag₃PO₄-g-C₃N₄ which can completely degrade 10mgL^-1 of methyl orange under visible light irradiation in 5min, with the rate constant (k) as high as 0.236min^-1. Moreover, co-doping enhances the photodegradation rate of multiple contaminants while immobilization significantly improves catalyst stability. Most of g-C₃N₄ composites possess high reusability enabling their practical applications in wastewater treatment. Furthermore, environmental conditions such as solution pH, reaction temperature, dissolved oxygen, and dissolved organic matter all have important effects on the photocatalytic ability of g-C₃N₄ photocatalyst. Future work should focus on the synthesis of innovative g-C₃N₄ nanocomposites for the efficient removal of organic contaminants in water and wastewater.

WS2/g-C3N4 composite as an efficient heterojunction photocatalyst for biocatalyzed artificial photosynthesis

A heterogeneous WS₂/g-C₃N₄ composite photocatalyst was prepared by a facile ultrasound-assisted hydrothermal method.

Enhanced photo-electrochemical response of reduced graphene oxide and C3N4 nanosheets for rutin detection

Herein, a sensitive photo-electrochemical sensor based on C₃N₄ and reduced graphene oxide nanosheets modified glassy carbon electrode (C₃N₄-RGO/GCE) has been fabricated for the detection of rutin under UV light illumination. In C₃N₄-RGO catalyst, RGO not only works as a template but also promotes electron transfer, meanwhile, C₃N₄ acts as a photocatalyst. Benefiting from the superior electron transfer capacity and efficient UV light effect of the C₃N₄-RGO catalyst, we get a photo-electrochemical sensor for the rutin detecting with a low detection limit of 1.78×10^-9molL^-1 and an excellent linear range of 5×10^-9-1.4×10^-4molL^-1. Meanwhile, the achieved C₃N₄-RGO/GCE demonstrated nice selectivity, good reproducibility as well as reliable stability. Moreover, compared with the electrochemical determination, the C₃N₄-RGO electrode provides a new way for rutin detection by photo-electrochemical method with a promising UV light responsive result.

Hydrothermal fabrication of natural sun light active Dy2WO6 doped ZnO and its enhanced photo-electrocatalytic activity and self-cleaning properties

Dy₂WO₆ doped ZnO, fabricated by template free hydrothermal process, reveals enhanced efficiency in solar photocatalytic degradation of azo dyes, electrocatalytic oxidation of methanol and hydrophobicity.

Nanonization of g-C3N4with the assistance of activated carbon for improved visible light photocatalysis

Activated carbon was used as a support to obtain a nano-sized g-C₃N₄/AC catalyst with excellent activity for phenol degradation under visible light.

Fabrication of g-C3N4/Au/CdZnS Z-scheme photocatalyst to enhance photocatalysis performance

Sandwich-structured C₃N₄/Au/CdZnS photocatalyst.

Preparation of DyVO4/WO3 heterojunction plate array films with enhanced photoelectrochemical activity

In this work, DyVO₄/WO₃ heterojunction plate arrays were first fabricated on FTO using a hydrothermal method for WO₃ vertical plate arrays and a dipping–annealing process for the deposition of DyVO₄ nanoparticles.

One-step in situ calcination synthesis of g-C3N4/N-TiO2 hybrids with enhanced photoactivity

A series of g-C₃N₄/N-TiO₂ composites were prepared by a solid-phase calcining process and their enhanced visible light photoresponse, photocatalytic activity, and photoelectrochemical performance were demonstrated.

Fabrication and characterization of hollow CdMoO4 coupled g-C3N4 heterojunction with enhanced photocatalytic activity

This research was designed for the first time to investigate the activities of CdMoO4/g-C3N4 heterojunction in photocatalytic degradation of rhodamine B (RhB) and converting CO2 to fuels. The composite was synthesized via a simple mixing-calcination method and characterized by various techniques including Brunauer-Emmett-Teller method (BET), X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, UV-vis diffuse reflectance spectroscopy, photoluminescence spectroscopy, and electrochemical method. The results showed that the introduction of CdMoO4 to g-C3N4 exerted little effect on the property of light absorption, but resulted in an increase in the BET surface area, which was beneficial for the adsorption of RhB. More importantly, formation of a hetero-junction structure between CdMoO4 and g-C3N4 significantly promoted the separation of electron-hole pairs and ultimately enhanced the photocatalytic activity. The optimal CdMoO4/g-C3N4 composite could degrade RhB 6.5 times faster than pure g-C3N4 under visible light irradiation. Meanwhile, the composite showed a CO2 conversion rate of 25.8 μmol h(-1) gcat(-1), which was 4.8 and 8.1 times higher than those of g-C3N4 and P25, respectively, under simulated sunlight irradiation. This work might represent an important step in simultaneous environmental protection and energy production by g-C3N4 based materials.

Ag/g-C3N4 catalyst with superior catalytic performance for the degradation of dyes: a borohydride-generated superoxide radical approach

A straightforward approach is developed for fabrication of a visible-light-driven Ag/g-C3N4 catalyst. Morphological observation shows that the g-C3N4 sheets are decorated with highly dispersed Ag nanoparticles having an average size of 5.6 nm. The photocatalytic activity measurements demonstrate that the photocatalytic degradation rates of methyl orange (MO), methylene blue (MB), and neutral dark yellow GL (NDY-GL) over Ag/g-C3N4-4 can reach up to 98.2, 99.3 and 99.6% in the presence of borohydride ions (BH4(-)) only with 8, 45, and 16 min visible light irradiation, respectively. The significant enhancement in photoactivity of the catalyst is mainly attributed to the high dispersity and smaller size of Ag nanoparticles, the strong surface plasmon resonance (SPR) effect of metallic Ag nanoparticles, the efficient separation of photogenerated charge carriers, the additional superoxide radicals (O) generated from the reduction of dissolved oxygen in the presence of BH4(-) and the synergistic effect of Ag nanoparticles and g-C3N4.

Polymeric photocatalysts based on graphitic carbon nitride

Semiconductor-based photocatalysis is considered to be an attractive way for solving the worldwide energy shortage and environmental pollution issues. Since the pioneering work in 2009 on graphitic carbon nitride (g-C3N4) for visible-light photocatalytic water splitting, g-C3N4 -based photocatalysis has become a very hot research topic. This review summarizes the recent progress regarding the design and preparation of g-C3N4 -based photocatalysts, including the fabrication and nanostructure design of pristine g-C3N4 , bandgap engineering through atomic-level doping and molecular-level modification, and the preparation of g-C3N4 -based semiconductor composites. Also, the photo-catalytic applications of g-C3N4 -based photocatalysts in the fields of water splitting, CO2 reduction, pollutant degradation, organic syntheses, and bacterial disinfection are reviewed, with emphasis on photocatalysis promoted by carbon materials, non-noble-metal cocatalysts, and Z-scheme heterojunctions. Finally, the concluding remarks are presented and some perspectives regarding the future development of g-C3N4 -based photocatalysts are highlighted.

New application of Z-scheme Ag3PO4/g-C3N4 composite in converting CO2 to fuel

This research was designed for the first time to investigate the activities of photocatalytic composite, Ag3PO4/g-C3N4, in converting CO2 to fuels under simulated sunlight irradiation. The composite was synthesized using a simple in situ deposition method and characterized by various techniques including Brunauer-Emmett-Teller method (BET), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy (DRS), photoluminescence spectroscopy (PL), and an electrochemical method. Thorough investigation indicated that the composite consisted of Ag3PO4, Ag, and g-C3N4. The introduction of Ag3PO4 on g-C3N4 promoted its light absorption performance. However, more significant was the formation of heterojunction structure between Ag3PO4 and g-C3N4, which efficiently promoted the separation of electron-hole pairs by a Z-scheme mechanism and ultimately enhanced the photocatalytic CO2 reduction performance of the Ag3PO4/g-C3N4. The optimal Ag3PO4/g-C3N4 photocatalyst showed a CO2 conversion rate of 57.5 μmol · h(-1) · gcat(-1), which was 6.1 and 10.4 times higher than those of g-C3N4 and P25, respectively, under simulated sunlight irradiation. The work found a new application of the photocatalyst, Ag3PO4/g-C3N4, in simultaneous environmental protection and energy production.

Facile synthesized highly active BiOI/Zn2GeO4 composites for the elimination of endocrine disrupter BPA under visible light irradiation

A high-performance BiOI/Zn₂GeO₄ visible light photocatalyst for the decomposition of organic pollutants was fabricated using a simple chemical bath approach.

Fabrication, characterization and photocatalytic activity of g-C3N4 coupled with FeVO4 nanorods

The coupling of FeVO₄ nanorods with g-C₃N₄ promotes the separation efficiency of photogenerated electron–hole pairs, and subsequently enhances its photocatalytic activity in rhodamine photodegradation.

In situ synthesis of g-C3N4/WO3 heterojunction plates array films with enhanced photoelectrochemical performance

g-C₃N₄/WO₃ heterojunction plate array films with enhanced photoelectrochemical (PEC) performance were successfully synthesized through a combination of hydrothermal and dipping-annealing methods.

The preparation and properties of a g-C3N4/AgBr nanocomposite photocatalyst based on protonation pretreatment

Protonation pretreatment promotes the formation of a uniform g-C₃N₄/AgBr nanocomposite, thereby efficiently enhancing the photocatalytic activity through the Z-scheme charge transfer.

Single-crystalline Bi19Br3S27 nanorods with an efficiently improved photocatalytic activity

Single-crystalline Bi₁₉Br₃S₂₇ nanorods were prepared and showed excellent visible-light photocatalytic performance.

Synthesis of g-C3N4 at different temperatures for superior visible/UV photocatalytic performance and photoelectrochemical sensing of MB solution

The visible light absorption of g-C₃N₄ was extended through controlling the synthesis temperature, and thus enhanced visible/UV photocatalytic activity. Moreover, g-C₃N₄ can also be used as a photoelectrochemical sensor.