Impact of Environmental Conditions on the Enzymatic Decontamination of a Material Surface Contaminated with Chemical Warfare Agent Simulants

Pretreatment Method for Chloramine-T Decon Sample Before GC Analysis of HD and VX

Chloramine-T, especially its solution in weak acidity, is one of the decontaminants for chemical warfare agents (CWAs), HD, and VX. A high CWAs recovery from decontamination (decon) sample via pretreatment was essential for evaluating decontamination effects. This paper performed experiments to optimize pretreatment methods to extract residual CWAs from chloramine-T decon samples before GC analysis. Effects of two neutralization methods, destroying decon activity by 15% Na₂SO₃ or decreasing decon activity by 3% NH₃·H₂O or 4% NaOH, were studied. Results showed they were all suitable for the HD decon sample, but only 4% NaOH was ideal for the VX decon sample. As for extractant, compared with dichloromethane, petroleum ether was more suitable for recovering CWAs from decon samples. A high recovery above 80% could be obtained for HD and VX samples ranging from 10 mg/L to 10,000 mg/L when optimized neutralization and extraction methods were simultaneously carried out.

Pretreatment method for hypochlorite decon water before GC analysis of HD, VX, and GD

Active chlorine decontaminants like hypochlorite are used to destroy chemical warfare agents (CWAs) such as HD, VX and GD due to the former's strong oxidation capacity and high nucleophilicity. In this paper, experiments were performed to identify the main factors affecting agent recovery from decon water. Based on the results, a method to recover residual CWAs from hypochlorite decon water before quantitative determination by GC was developed. The results showed that the extraction solvent was a critical determinant of high CWA recovery. Dichloromethane was more suitable than petroleum either, especially for samples containing GD or low residual CWAs. For VX-containing samples, the use of an alkali solution improved VX recovery. Neutralization was also important for a high CWA recovery, especially for samples with low CWA concentrations and/or strong decontaminant reactivity. The use of 15% sodium sulfite as the neutralization solution gave the best results for hypochlorite decon water. When the optimized conditions of simultaneous sodium sulfite neutralization and dichloromethane extraction were used, the recovery of HD, VX and GD in hypochlorite decon water was greater than 85% at a concentration range of 20 mg/L to 10,000 mg/L.

Application of Microbial Cleaning Technology for Removal of Surface Contamination

Microbial cleaning takes advantage of naturally-occurring microbes to remove a wide variety of contaminants from various surfaces. The method is based on the affinity of microbes for hydrocarbons that are digested, producing harmless carbon dioxide, water, and soluble fatty acids. The microbes are nonpathogenic and are safe to handle and dispose. The process is environmentally-friendly and is less expensive than solvent cleaning, but it is not applicable to high precision cleaning applications. Typical applications include parts washing; oil and grease removal from concrete and other floor surfaces, and from drains and grease traps; cleaning and disinfection in healthcare facilities; cleaning of historical artworks and structures; and household and institutional cleaning applications.

Polysaccharide-thickened aqueous fluoride solutions for rapid destruction of the nerve agent VX. Introducing the opportunity for extensive decontamination scenarios

Among the chemical warfare agents, the extremely toxic nerve agent VX (O-ethyl S-2-(diisopropylamino)ethyl methylphosphonothioate) is a target of high importance in the development of decontamination methods, due to its indefinite persistence on common environmental surfaces. Liquid decontaminants are mostly characterized by high corrosivity, usually offer poor coverage, and tend to flow and accumulate in low areas. Therefore, the development of a noncorrosive decontaminant, sufficiently viscous to resist dripping from the contaminated surface, is necessary. In the present paper we studied different polysaccharides-thickened fluoride aqueous solutions as noncorrosive decontaminants for rapid and efficient VX degradation to the nontoxic product EMPA (ethyl methylphosphonic acid). Polysaccharides are environmentally benign, natural, and inexpensive. Other known decontaminants cannot be thickened by polysaccharides, due to the sensitivity of the latter toward basic or oxidizing agents. We found that the efficiency of VX degradation in these viscous solutions in terms of kinetics and product identity is similar to that of KF aqueous solutions. Guar gum (1.5 wt %) with 4 wt % KF was chosen for further evaluation. The benign nature, rheological properties, adhering capabilities to different surfaces, and decontamination from a porous matrix were examined. This formulation showed promising properties for implementation as a spray decontaminant for common and sensitive environmental surfaces.