2-Amino-3,5-dicarbonitrile-6-thio-pyridines: New and Effective Corrosion Inhibitors for Mild Steel in 1 M HCl

Experimental and Theoretical Tests on the Corrosion Protection of Mild Steel in Hydrochloric Acid Environment by the Use of Pyrazole Derivative

In this study, 1,5-diallyl-1H-pyrazolo [3,4-d] pyrimidin-4 (5H)-one (PPD) was evaluated as an anticorrosion agent for mild steel (MS) in 1 M HCl. The analysis was performed by weight loss (WL), potentiodynamic polarization measurement, and electrochemical impedance spectroscopy (EIS). The Tafel polarization showed that PPD is a mixed-type inhibitor and reaches 94% of the protective efficiency at 10^-3 M. EIS results indicated that the resistance to charge transfer increases with increasing inhibitor concentration and the corrosion of MS is controlled by a charge transfer process. The inhibitor adsorption on the MS surface obeyed the Langmuir's adsorption isotherm. Thermodynamic parameters were calculated to elaborate the corrosion inhibition mechanism. The micrographic analysis revealed the existence of a barrier layer on the electrode surface with the presence of PPD. Theoretical examinations performed by electronic/atomic computer simulations confirmed that the obtained results were found to be consistent with experimental findings.

Experimental and surface morphological studies of corrosion inhibition on carbon steel in HCl solution using some new hydrazide derivatives

The corrosion inhibition of C-steel in 1 M HCl was assessed using three newly synthesized hydrazide derivatives (H1, H2 and H3) using weight loss (WL), potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) techniques. Also, the adsorption of these compounds was confirmed using several techniques such as atomic force microscopy (AFM), Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). High inhibition efficiencies were obtained resulting from the constitution of the protective layer on the C-steel surface, which increased with increasing concentration and temperature and reached 91.7 to 96.5% as obtained from the chemical method at 20 × 10-6 M at 45 °C. The polarization curves refer to these derivatives belonging to mixed-type inhibitors. The adsorption of (H1, H2 and H3)on the CS surface follows the Temkin adsorption isotherm. Inhibition influence of hydrazide derivatives at the molecular level was greatly proven using quantum chemical calculations and Monte Carlo simulation methods. Furthermore, the molecular simulation results evidenced the adsorption of these derivatives on the carbon steel surface.

2-Amino-3,5-dicarbonitrile-6-sulfanylpyridines: synthesis and multiple biological activity - a review

This review integrates the published data of the last decade (from 2010 to 2020) on the synthesis of the 2-amino-3,5-dicarbonitrile-6-sulfanylpyridine scaffold, the derivatives of which are widely used in the synthesis of biologically active compounds. Currently, no systematic accounts of synthetic routes towards this class of heterocyclic compounds can be found in the literature. The present-day trends in the catalytic synthesis of 2-amino-3,5-dicarbonitrile-6-sulfanylpyridines are considered using pseudo-four-component reaction (pseudo-4CR) by condensation of malononitrile molecules with thiols and aldehydes, and alternative three-component (3CR) condensations of malononitrile with 2-arylidenemalononitrile and S-nucleophiles.

The latest advances in the catalytic synthesis of biologically active compounds with 2-amino-3,5-dicarbonitrile-6-sulfanylpyridine scaffold via the multicomponent reactions of malononitrile have been discussed.

Synthesis and structures of divalent Co, Ni, Zn and Cd complexes of mixed dichalcogen and dipnictogen ligands with corrosion inhibition properties: experimental and computational studies

The structural and corrosion inhibition properties of four different transition-metal complexes of heteroleptic S-donor atom dithiophosphonate and N-donor atom phenanthroline ligands are reported. Full structural characterization of the Co, Ni, Zn and Cd complexes was achieved with the aid of single-crystal X-ray crystallography. Structural elucidation revealed the formation of a 4-coordinate Zn(ii) complex, and 6-coordinate Ni(ii) and Cd(ii), as well as a novel dithiophosphonato Co(ii) complex. The ability of the complexes with this ligand type to act as inhibitors of mild steel corrosion in 1 M HCl solution is reported for the first time. Corrosion inhibition potentials of the complexes were assessed using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and density functional theory (DFT). The open circuit potential (OCP) time profile showed the system achieved a steady-state potential before the first 600 s after submerging the working electrode in the corrosive medium. The studied metal complexes are good inhibitors of mild steel corrosion in 1 M HCl and were found to retard the corrosion rate by forming an adsorbed pseudocapacitive film on the steel surface. The order of inhibition efficiencies was in the order Ni (94.14%) > Cd (92.28%) > Zn (91.14%) > Co (72.53%).

Synthesis of Macromolecular Aromatic Epoxy Resins as Anticorrosive Materials: Computational Modeling Reinforced Experimental Studies

Herein, two bifunctional macromolecular aromatic epoxy resins (ERs), namely, 4,4'-isopropylidenediphenol oxirane (ERH) and 4,4'-isopropylidene tetrabromodiphenol oxirane (ERBr), are synthesized, characterized, and evaluated as anticorrosive materials for carbon steel corrosion in acidic medium. ERs were characterized using proton nuclear magnetic resonance (1H NMR) and Fourier transform infrared spectroscopy techniques. Investigated ERs acted as effective corrosion inhibitors, and their inhibition effectiveness followed the order ERBr (96.5%) > ERH (95.6%). Potentiodynamic polarization results showed that ERH and ERBr behave as predominantly anodic type and the cathodic type of corrosion inhibitors, respectively. Adsorption of both the studied ERH and ERBr molecules obeyed the Langmuir adsorption isotherm model. Density functional theory and molecular dynamics studies showed that protonated forms of ERH and ERBr contribute more to metal (carbon steel)-inhibitor (ERH/ERBr) interactions than their neutral forms.

Adsorption and anticorrosive behavior of aromatic epoxy monomers on carbon steel corrosion in acidic solution: computational studies and sustained experimental studies

Herein, the synthesis, characterization and corrosion inhibition effectiveness of two aromatic epoxy monomers (AEMs) namely, 2-(oxiran-2-yl-methoxy)-N,N-bis(oxiran-2-yl-methyl)aniline (AEM1) and N,N-bis(oxiran-2-ylmethyl)-2-((oxiran-2-ylmethyl) thio)aniline (AEM2), in carbon steel corrosive dissolution in 1 M HCl solution is investigated using computational and experimental techniques. AEM1 and AEM2 were characterized using FT-IR, ¹H NMR and ¹³C NMR spectroscopy techniques. Electrochemical results demonstrated that AEMs act as reasonably good corrosion inhibitors for carbon steel in 1 M HCl medium and their effectiveness followed the sequence: AEM2 (95.4%) > AEM1 (94.3%). A PDP study showed that AEMs act as mixed-type inhibitors with slight anodic predominance. Adsorption of the AEMs obeyed the Langmuir isotherm model. Interactions between AEMs and the metallic surface was further studied using DFT and MD simulations that give several computational parameters such as I, A, E_HOMO, E_LUMO, ΔE, δ, χ, ρ, σ, η, ΔN and E_ads. The experimental and computational results were in good agreement and well complimented each other.

Herein, the synthesis, characterization and corrosion inhibition effectiveness of two aromatic epoxy monomers (AEMs) in carbon steel corrosive dissolution in 1 M HCl solution was investigated using computational and experimental techniques.

Corrosion inhibition of mild steel in sulfuric acid solution by loquat (Eriobotrya japonica Lindl.) leaves extract

The inhibition performance and mechanism of loquat leaves extract (LLE) for the corrosion of mild steel in 0.5 M H2SO4 were investigated using weight loss method, electrochemical measurements and scanning electron microscope (SEM). The results revealed that LLE acted as a modest cathodic inhibitor, its inhibition efficiency increased with the concentration of LLE and reached a maximum value of 96% at the 100% V/V concentration, but decreased with incremental temperature. Besides, it was found that the adsorption of LLE on steel surface obeyed Langmuir adsorption isotherm, and then the thermodynamic and kinetic parameters were further determined accordingly. Furthermore, LLE was preliminarily separated by pH-gradient sedimentation and the synergistic inhibition between the isolates was investigated.

A combination of experiment and theoretical methods to study the novel and low-cost corrosion inhibitor 1-hydroxy-7-azabenzotriazole for mild steel in 1 M sulfuric acid

1-Hydroxy-7-azabenzotriazole (HOAT) was explored via experimental and theoretical computation methods as a corrosion inhibitor for mild steel in 1 M sulfuric acid. These data indicate that HOAT has good ability to suppress corrosion of the mild steel, with ideal agreement with between experimental and computational results. Besides, the electrochemical experiments show that HOAT is a mixed-type corrosion inhibitor for mild steel in 1 M H₂SO₄. Furthermore, HOAT adsorption on the surface of steel conforms to the Langmuir isotherm model. Finally, computational simulation was executed to deeply investigate the mechanism to HOAT inhibition corrosion of steel.

1-Hydroxy-7-azabenzotriazole (HOAT) was explored via experimental and theoretical computation methods as a corrosion inhibitor for mild steel in 1 M sulfuric acid.

Inhibition of mild steel corrosion in hydrochloric acid using two novel pyridine Schiff base derivatives: a comparative study of experimental and theoretical results

Herein, we present a comparative study of experimental and theoretical results on the inhibition of mild steel corrosion in hydrochloric acid using two novel pyridine Schiff base derivatives.