Volatile Products Formed in the Thermal Decomposition of a Tobacco Substrate

Characterization techniques for tobacco and its derivatives: a systematic review

Biomass and its derivatives have broad applications in the fields of bio-catalysis, energy storage, environmental remediation. The structure and components of biomass, which are vital parameters affecting corresponding performances of derived products, need to be fully understood for further regulating the biomass and its derivatives. Herein, tobacco is taken as an example of biomass to introduce the typical characterization techniques in unraveling the structural information, chemical components, and properties of biomass and its derivatives. Firstly, the structural information, chemical components and application for biomass are summarized. Then the characterization techniques together with the resultant structural information and chemical components are introduced. Finally, to promote a wide and deep study in this field, the perspectives and challenges concerning structure and composition charaterization in biomass and its derivatives are put forward.

Quantitative analysis of pyrolysis characteristics and chemical components of tobacco materials based on machine learning

To investigate the quantitative relationship between the pyrolysis characteristics and chemical components of tobacco materials, various machine learning methods were used to establish a quantitative analysis model of tobacco. The model relates the thermal weight loss rate to 19 chemical components, and identifies the characteristic temperature intervals of the pyrolysis process that significantly relate to the chemical components. The results showed that: 1) Among various machine learning methods, partial least squares (PLS), support vector regression (SVR) and Gaussian process regression (GPR) demonstrated superior regression performance on thermogravimetric data and chemical components. 2) The PLS model showed the best performance on fitting and prediction effects, and has good generalization ability to predict the 19 chemical components. For most components, the determination coefficients R 2 are above 0.85. While the performance of SVR and GPR models was comparable, the R 2 for most chemical components were below 0.75. 3) The significant temperature intervals for various chemical components were different, and most of the affected temperature intervals were within 130°C-400°C. The results can provide a reference for the materials selection of cigarette and reveal the possible interactions of various chemical components of tobacco materials in the pyrolysis process.

Aerosol Emissions from Heated Tobacco Products: A Review Focusing on Carbonyls, Analytical Methods, and Experimental Quality

We provide an extensive review of 17 independent and industry-funded studies targeting carbonyls in aerosol emissions of Heated Tobacco Products (HTPs), focusing on quality criteria based on the reproducibility of experiments, appropriate analytic methods, and puffing regimes. Most revised studies complied with these requirements, but some were unreproducible, while others failed to consider analytical variables that may have affected the results and/or produced unrealistic comparisons. We also provide a review of the literature on the physicochemical properties of heated tobacco and HTP aerosols, as well as the evaluation of HTPs by regulatory agencies, addressing various critiques of their relative safety profile. The outcomes from the revised studies and regulatory evaluations tend to agree with and converge to a general consensus that HTP aerosols expose users to significantly lower levels of toxicity than tobacco smoke.

Observation of viscous liquid flow in tobacco substrate during heating using optical coherence tomography

The present study used optical coherence tomography (OCT) to monitor the dynamics of a highly viscous liquid in a porous tobacco substrate during heating. The OCT technique was integrated with a specially designed heating chamber and an air pump for measuring. Two transitional points in the liquid behaviours at different temperatures were estimated using OCT and statistical analysis of the attenuation coefficient. The first point, 'A', shows the time approximation at which the penetration-dominant zone transitions into the evaporation-dominant zone. The second point, 'B', indicates the time approximation at which rapid evaporation of free liquid transitions into slow evaporation of trapped and bound liquid. This analytical system is an alternative for tracking liquid transport in porous biomass during heating.

Toba-CPD: An Extended Chemical Percolation Devolatilization Model for Tobacco Pyrolysis

Tobacco features chemical compositions different from that of raw lignocellulosic biomass. Currently, the performance of network models, like Bio-Chemical Percolation Devolatilization (Bio-CPD), on tobacco pyrolysis is unclear, and only global kinetics have been proposed for tobacco devolatilization, which does not have the versatility for a wide range of heating conditions and tobacco types. To address this issue, the present work first assessed the performance of the Bio-CPD model on tobacco pyrolysis through an a priori study, which showed large deviations. Afterward, an extended Chemical Percolation Devolatilization model for tobacco pyrolysis (Toba-CPD) was developed by modifying the kinetic parameters using a grid-search optimization strategy. The process of grid-search optimization strategy is based on the kinetic parameters of the Bio-CPD model and modified with experimental results of 11 tobacco types under a wide range of heating rates. Finally, the performance of Toba-CPD was measured with experimental results which were not used during parameters optimization. Results demonstrated that the Toba-CPD models could well reproduce the pyrolysis of various tobacco types under a wide range of heating rates (R ² > 0.957).

Comparison of 3R4F cigarette smoke and IQOS heated tobacco product aerosol emissions

In this study, the smoke from a 3R4F research cigarette and the aerosol generated by the Heated Tobacco Product IQOS, also referred to as the Tobacco Heating System (THS) 2.2 in the literature, were compared. The objective was to characterize the gas and suspended particulate matter compositions in the mainstream smoke from a combusted 3R4F cigarette and in the aerosol generated by IQOS during use. The results indicated that the determined aerosol emissions from IQOS were notably lower than in the cigarette smoke under a Health Canada Intense puffing regimen. As an interesting detail in this study, the maximum nicotine concentrations within a puff were practically the same in both the 3R4F smoke and the IQOS aerosol, but the average concentration was lower for the IQOS aerosol. For both products, water constituted a significant proportion of the particulate matter, although it was substantially higher in the IQOS aerosol. Furthermore, combustion-related solid particles observed in the 3R4F smoke contained elements such as carbon, oxygen, potassium, calcium, and silicon. In contrast, IQOS aerosol particulate matter was composed of semi-volatile organic constituents with some minor traces of oxygen and silicon. The particulate matter found in the IQOS aerosol was volatile, which was especially noticeable when exposed to the electron beam of the scanning electron microscope (SEM) and Transmission Electron Microscope (TEM).

Experimental and Kinetic Studies on Tobacco Pyrolysis under a Wide Range of Heating Rates

In the present work, experimental and kinetic studies are conducted to explore and model tobacco pyrolysis characteristics under a wide range of heating conditions. First, thermal decomposition processes of a tobacco sample were investigated using thermogravimetric analysis/difference thermogravimetry (TGA/DTG) experiments under a wide range of heating rates (10-500 K/min), and the TGA/DTG profiles were compared to highlight the effect of heating rate on the pyrolysis characteristics. The results showed that the tobacco sample was sufficiently devolatilized at 1173.15 K (900 °C) and the final volatiles yields were not sensitive to the heating rate. Moreover, it was illustrated that the DTG curve presents a polymerization trend with the increase in heating rate. Then, kinetic parameters, including total component mass fraction, preexponential factor, and activation energy, were derived by deconvolution from TG/DTG profiles for each component with a one-step kinetic framework, and the correlations between kinetic parameters and heating rates were further explored and modeled. The results illustrated that four subpeaks can be found in the deconvolution, indicating the four components (volatile components, hemicellulose, cellulose, and lignin). In addition, the activation energy of each component was found to be insensitive with heating rate (with standard deviation less than 20%). Therefore, an average activation energy was used for each component to avoid the compensation effect and a power correlation between the heating rate and the preexponential factor could be found. A posteriori analysis also confirmed the validity of this correlation.

Investigation and comparison of the transfer of TSNA from tobacco to cigarette mainstream smoke and to the aerosol of a heated tobacco product, THS2.2

Tobacco-specific nitrosamines (TSNA) levels in tobacco cut filler and cigarette smoke were measured in more than 1000 commercially available cigarettes sampled between 2008 and 2014. Relative contributions to their transfer from tobacco to the mainstream smoke in terms of direct transfer by distillation, pyrorelease, and pyrosynthesis were evaluated on the basis of the comparison with the transfer of nicotine from tobacco to smoke. N'-nitrosonornicotine (NNN) was transferred essentially by distillation, while N'-nitrosoanatabine (NAT), 4-(methylnitrosamino)-1-(3-bipyridyl)-1-butanone (NNK) and N'-nitrosoanabasine (NAB) were transferred by pyrorelease or pyrosynthesis as well. In the case of the Tobacco Heating System 2.2, the transfer of nicotine from tobacco to the aerosol was similar to that observed for cigarettes, while the % transfer of TSNAs from tobacco to THS 2.2 aerosol was 2-3 times lower than in cigarettes. This difference is due to the fact that the tobacco is heated instead of burnt resulting in a lower direct transfer by distillation and a lower if any contribution of pyrosynthesis or pyrorelease.

Assessment of tobacco heating product THP1.0. Part 2: Product design, operation and thermophysical characterisation

A novel tobacco heating product, THP1.0, that heats tobacco below 245 °C is described. It was designed to eliminate tobacco combustion, while heating tobacco to release nicotine, tobacco volatiles and glycerol to form its aerosol. The stewardship assessment approach behind the THP 1.0 design was based on established toxicological principles. Thermophysical studies were conducted to examine the extent of tobacco thermal conversion during operation. Thermogravimetric analysis of the tobacco material revealed the major thermal behaviour in air and nitrogen up to 900 °C. This, combined with the heating temperature profiling of the heater and tobacco rod, verified that the tobacco was not subject to combustion. The levels of tobacco combustion markers (CO, CO₂, NO and NO_x) in the aerosol of THP1.0 were significantly lower than the levels if there were any significant pyrolysis or combustion. Quantification of other tobacco thermal decomposition and evaporative transfer markers showed that these levels were, on average, reduced by more than 90% in THP1.0 aerosol as compared with cigarette smoke. The physical integrity of the tobacco consumable rod showed no ashing. Taken together, these data establish that the aerosol generated by THP1.0 is produced mainly by evaporation and distillation, and not by combustion or pyrolysis.

Combustion of hazardous biological waste derived from the fermentation of antibiotics using TG-FTIR and Py-GC/MS techniques

The combustion characteristics for three kinds of antibiotics residue (AR) materials were investigated by TG-FTIR and Py-GC/MS technique. The TG results indicated that AR combustion involved three stages, and correlation between the H/C atomic ratio of the raw materials and peak temperature of weight loss for the second stage was obtained. The FTIR spectra identified evolving gaseous products as CO2, CH4, HCNO, NH3, HCN, and NO. An AR material with a low H/C ratio promoted the formation of CO2 and HCN, but suppressed the yields of NH3 and CH4. The Py-GC/MS results suggested that abundant volatiles can be produced, including alkenes, benzene, phenols, furans, acid, and heterocyclic-N, nitrile-N and amine-N compounds, and confirmed the FTIR absorption characteristics in the low temperature range. A possible pathway for the AR combustion was also tentatively presented.