Simultaneous Reduction and Surface Functionalization of Graphene Oxide by Chitosan and Their Synergistic Reinforcing Effects in PVA Films

Nanocomposites based on the graphene family for food packaging: historical perspective, preparation methods, and properties

Nanotechnology experienced a great technological advance after the discovery of the graphene family (graphene – Gr, graphene oxide – GO, and reduced graphene oxide-rGO). Based on the excellent properties of these materials, it is possible to develop novel polymeric nanocomposites for several applications in our daily routine. One of the most prominent applications is for food packaging, offering nanocomposites with improved thermal, mechanical, anti-microbial, and barrier properties against gas and water vapor. This paper reviewed food packaging from its inception to the present day, with the development of more resistant and intelligent packaging. Herein, the most common combinations of polymeric matrices (derived from non-renewable and renewable sources) with Gr, GO, and rGO and their typical preparation methods are presented. Besides, the interactions present in these nanocomposites will be discussed in detail, and their final properties will be thoroughly analyzed as a function of the preparation technique and graphene family-matrix combinations.

Food packaging based on nanotechnology of polymeric nanocomposites of graphene and graphene oxide results in packaging with better thermal, mechanical, antimicrobial, electrical packaging, moisture barrier and gas properties.

Development and evaluation of Moringa extract incorporated Chitosan/Guar gum/Poly (vinyl alcohol) active films for food packaging applications

The present study contributes the synthesis of active films with the incorporation of moringa extract (ME) into chitosan (CS)/guar gum (GG)/poly(vinyl alcohol) (PVA) matrix (CGPM) by simple solvent casting technique. The effect of ME on the mechanical, thermal, structural and morphological properties of CGPM active films were investigated. ME has shown a marked influence on the optical, thermal properties and swelling behaviour of CGPM active films. The improvement in the tensile strength of CGPM-1 active film (53.7 MPa) was observed compared to control CS/GG/PVA (CGP) film. DSC study revealed that glass transition temperature (Tg) and melting temperature (Tm) decreased with the addition of ME in the CGP matrix, which confirmed the miscibility among the components of active films. There was an improvement in the thermal stability of the CGPM active films. The FTIR study confirmed the molecular interaction between ME and CS/GG/PVA matrix. The XRD analysis showed a decrease in crystallinity with an increase in the ratio of CS for CGPM active films. The CGPM active films were an excellent barrier to UV- light and have exhibited a decrease in moisture adsorption and water solubility compared to CGP control film. The inclusion of ME in the CGP matrix leads to the formation of a dense compact surface, which in turn enhanced hydrophobicity of active films. The CGPM active films showed minimum WVP, OP values and overall migration values were within the limits of 10 mg/dm2. It was also observed that CGPM active films effectively inhibited the growth of E. coli and S. aureus bacteria. These findings suggest CGPM active films are biodegradable, biocompatible, non-toxic and hence can find application as food packaging materials.

Utilisation of Carp Skin Post-Production Waste in Binary Films Based on Furcellaran and Chitosan to Obtain Packaging Materials for Storing Blueberries

The aim of the study was to develop and characterise an innovative three-component biopolymer film based on chitosan (CHIT), furcellaran (FUR) and a gelatin hydrolysate from carp skins (Cyprinus carpio) (HGEL). The structure and morphology were characterised using the Fourier transform infrared spectroscopy (FT-IR) and atomic force microscopy (AFM). The FT-IR test showed no changes in the matrix after the addition of HGEL, which indicates that the film components were compatible. Based on the obtained AFM results, it was found that the addition of HGEL caused the formation of grooves and cracks on the surface of the film (reduction by ~21%). The addition of HGEL improved the antioxidant activity of the film (improvement by up to 2.318% and 444% of DPPH and FRAP power, respectively). Due to their properties, the tested films were used as active materials in the preservation of American blueberries. In the active films, the blueberries lost mass quickly compared to the synthetic film and were characterised by higher phenol content. The results obtained in this study create the opportunity to use the designed CHIT-FUR films in developing biodegradable packaging materials for food protection, but it is necessary to test their effectiveness on other food products.

Development of chitosan/poly (vinyl alcohol)/graphene oxide loaded with vanadium doped titanium dioxide patch for visible light driven antibacterial activity and accelerated wound healing application

Wound healing is a multi-stage process that is dynamic, interactive, and complicated. However, many nanomaterials are employed to expedite wound healing by demonstrating antibacterial activity or boosting cell proliferation. But only one phase is focused during the wound healing process. As a result, there is a need for optimum wound dressing materials that promotes different wound healing cascades with ideal properties. Herein, Graphene Oxide loaded with vanadium (V) doped titanium dioxide (TiO₂) blended with chitosan, and polyvinyl alcohol (CS/PVA/GO/TiO₂-V) patch was developed for wound healing. XRD, FTIR and FE-SEM analyses were carried out to study the morphology and structural property of the patch. The fabricated patch has a high surface porosity, excellent moisture vapor transfer rate, appropriate swelling behaviour, and oxygen permeability, which results in an excellent moist environment for wound breathing and effective management of wound exudates. The antibacterial test showed significant antibacterial efficacy against wound infections in the presence of light when compared to dark. In-vitro analysis such as hemocompatibility, cytotoxicity, cell adhesion, and scratch assay show the predicted potential wound healing application with high biocompatibility. These results suggest that CS/PVA/GO/TiO₂-V patch provides a microenvironment favourable to cells' growth and differentiation and positively modulates full-thickness wounds' healing.

Hydroxy citric acid cross-linked chitosan/guar gum/poly(vinyl alcohol) active films for food packaging applications

The present work aims to prepare Chitosan (CS)/Guar gum (GG)/Poly(vinyl alcohol) (PVA) cross-linked with Hydroxy citric acid (HCA) (CGPH active film) by solvent casting technique. The influence of HCA on different CS/PVA ratio (1:3, 1:1, 3:1) in presence of the fixed amount of GG (0.2%) was investigated. The analysis of the results showed that the addition of HCA to the different ratio of CS/PVA increased the degradation temperature and improved the mechanical properties of CGPH active films. FTIR spectra and XRD analysis revealed strong interactions among the components of CGPH active films. The analysis of SEM images and water contact angle suggested a compact, dense film surface with hydrophobic nature. Further, all the active films have shown a decrease in water vapour permeability (WVP) and acted as a barrier to UV-light. CGPH active films effectively inhibited the growth of S. aureus and E. coli bacteria. With all these features the CGPH active films can find application in food packaging.

A facile and green strategy to simultaneously enhance the flame retardant and mechanical properties of poly(vinyl alcohol) by introduction of a bio-based polyelectrolyte complex formed by chitosan and phytic acid

There are still some key problems in the process of the flame retardant treatment of poly vinyl alcohol (PVA): poor compatibility, deteriorating mechanical properties and potential toxicity to human health and environment.

Structural analysis of α-zirconium phosphate/cerium phosphate/graphene oxide nanocomposites with flame-retardant properties in polyvinyl alcohol

A ternary nanocomposite was developed, which exhibits novel synergistic flame-retardant effect with APP-containing PVA.

A label-free electrochemical aptasensor based on 3D porous CS/rGO/GCE for acetamiprid residue detection

A novel label-free electrochemical aptasensor was fabricated based on a three-dimensional porous electrode (3D-CS/rGO/GCE) for the detection of acetamiprid residues. The sensing signal was generated by the DNA itself. The porous electrode was prepared by electrodeposition in situ and characterized by scanning electron microscope (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). These results indicated that the porous electrode has a uniform nanoporous structure, high active area, and excellent conductivity, leading to improve the transmission efficiency of current signals. The 3D-CS/rGO/GCE was used to increase a load of acetamiprid aptamer on the electrode. Meanwhile, DNA self-assembly strategy was used to further increase the DNA amounts. Thus the electrochemical current was amplified significantly due to increased phosphate group amounts by the above synergistic effect. The determination of acetamiprid residues using square wave voltammetry (SWV) showed good sensitivity, with the linear range from 0.1 pM to 0.1 μM and the detection limit was 71.2 fM. The label-free electrochemical aptasensor was also used to detect acetamiprid residues in tea samples with satisfactory results.

High piezo-resistive performances of anisotropic composites realized by embedding rGO-based chitosan aerogels into open cell polyurethane foams

Anisotropic aerogel-foam composites were developed by embedding a reduced graphene oxide (rGO)/chitosan aerogel directly into an open-cell polyurethane foam through an in situ bidirectional freeze-drying process. The resulting aerogel-foam composites possess both excellent compression-resilience performance and stable piezo-resistive properties due, respectively, to the excellent mechanical properties of polyurethane foams and to the presence of a chitosan-based aerogel loaded with rGO. The latter, indeed, provides outstanding electrical properties due to its conductive and parallel flat lamellar structure. It has been proven that both mechanical and piezo-resistive properties are stable even after 1000 loading/unloading cycles and a reduction of the electrical resistance of about 86% is observed upon the application of a 60% strain. The high sensitivity, long cycling life, and reliable performance over a wide strain range make this unique anisotropic aerogel-foam composite a highly promising candidate for the production of wearable sensors and healthcare monitoring devices.

Organophilic graphene nanosheets as a promising nanofiller for bio-based polyurethane nanocomposites: investigation of the thermal, barrier and mechanical properties

The present study focuses on the design of new nanocomposite films using bio-based thermoplastic polyurethane (TPU) as a polymer matrix and long chain amine functionalized reduced graphene oxide (G-ODA) as a nanofiller.

Facile synthesis of a novel magnesium amino-tris-(methylenephosphonate)-reduced graphene oxide hybrid and its high performance in mechanical strength, thermal stability, smoke suppression and flame retardancy in phenolic foam

This study presents a one-step synthesis of a magnesium amino-tris-(methylenephosphonate) (Mg-AMP)-reduced graphene oxide (Mg-rGO) hybrid involving graphene oxide (GO) reduction and growth in situ of Mg-AMP nanoparticles in the absence of a reducing agent. Mg-rGO was characterized by X-ray diffraction, X-ray photoelectron and Fourier-transform infrared spectroscopies, transmission electronic microscopy, and thermogravimetric analysis (TGA). Mg-rGO was then used to prepare flame-retardant and toughened phenolic (PF) foam. This additive was found to enhance the compressive and flexural strengths of PF foam as well as to reduce its high friability and brittleness. The limiting oxygen index of the foam with 4 phr Mg-rGO (sample PF/4Mg-rGO) increased to 41.5%, compared with the 38% of untreated foam; the peak heat release rate and total heat release of sample PF/4Mg-rGO were decreased by 28.7 and 18.4%, respectively. Also, the total smoke release and peak CO production rate of PF/4Mg-rGO were reduced by 52.5 and 38.1%, respectively. TGA results indicated that Mg-rGO clearly improved the thermal stability of PF foam.

Emerging Chitosan-Based Films for Food Packaging Applications

Recent years have witnessed great developments in biobased polymer packaging films for the serious environmental problems caused by the petroleum-based nonbiodegradable packaging materials. Chitosan is one of the most abundant biopolymers after cellulose. Chitosan-based materials have been widely applied in various fields for their biological and physical properties of biocompatibility, biodegradability, antimicrobial ability, and easy film forming ability. Different chitosan-based films have been fabricated and applied in the field of food packaging. Most of the review papers related to chitosan-based films are focusing on antibacterial food packaging films. Along with the advances in the nanotechnology and polymer science, numerous strategies, for instance direct casting, coating, dipping, layer-by-layer assembly, and extrusion, have been employed to prepare chitosan-based films with multiple functionalities. The emerging food packaging applications of chitosan-based films as antibacterial films, barrier films, and sensing films have achieved great developments. This article comprehensively reviews recent advances in the preparation and application of engineered chitosan-based films in food packaging fields.

In situ sonochemical reduction and direct functionalization of graphene oxide: A robust approach with thermal and biomedical applications

The rapid, robust, scalable and non-hazardous sonochemical approach for in situ reduction and direct functionalization of graphene oxide has been developed for non-toxic biomedical applications. The graphene oxide (GrO) was directly functionalized with tryptamine (TA) without using any hazardous acylating and coupling reagents. The reaction was completed within 20min. An impact of ultrasound was inferred for a direct functionalization with other conventional methods. The evolved electronic states were confirmed with near edge X-ray absorption fine structure (NEXAFS). The direct covalent functionalization and formation of f-(TA) GrO was proven with FTIR, ¹³C solid state NMR, XPS, XRD, Raman' HRTEM, AFM and TGA. The total percentage weight loss in TGA confirms an enhanced thermal stability of f-(TA) GrO. The f-(TA) GrO was further explored for an investigation of in vitro antimicrobial activity to ensure the health and environmental safety. An outstanding antibacterial activity of f-(TA) GrO was found against gram positive Staphylococcus aureus at MIC 128mgmL^-1. It confirms a suitability of f-(TA) GrO for thermally stable antibacterial coating. The f-(TA) GrO showed 39.14-48.9% antioxidant activities, evaluated with 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical assay. The inherent cytotoxicity of f-(TA) GrO was evaluated with SRB assay to living cells, MCF-7 and Vero. The estimated cell viabilities were >80% upon addition of f-(TA) GrO over a wide concentration range of 10-80μgmL^-1. The high cytocompatibility of f-(TA) GrO confirms the low toxicity and an excellent biocompatibility. The morphological effect on Vero cell line, evidently confirmed the biocompatibility of f-(TA) GrO. Therefore, f-(TA) GrO was emerged as an advanced functional biomaterial for thermal and biomedical applications.

Studies on Synthesis of Electrochemically Exfoliated Functionalized Graphene and Polylactic Acid/Ferric Phytate Functionalized Graphene Nanocomposites as New Fire Hazard Suppression Materials

Practical application of functionalized graphene in polymeric nanocomposites is hampered by the lack of cost-effective and eco-friendly methods for its production. Here, we reported a facile and green electrochemical approach for preparing ferric phytate functionalized graphene (f-GNS) by simultaneously utilizing biobased phytic acid as electrolyte and modifier for the first time. Due to the presence of phytic acid, electrochemical exfoliation leads to low oxidized graphene sheets (a C/O ratio of 14.8) that are tens of micrometers large. Successful functionalization of graphene was confirmed by the appearance of phosphorus and iron peaks in the X-ray photoelectron spectrum. Further, high-performance polylactic acid/f-GNS nanocomposites are readily fabricated by a convenient masterbatch strategy. Notably, inclusion of well-dispersed f-GNS resulted in dramatic suppression on fire hazards of polylactic acid in terms of reduced peak heat-release rate (decreased by 40%), low CO yield, and formation of a high graphitized protective char layer. Moreover, obviously improvements in crystallization rate and thermal conductivities of polylactic acid nanocomposites were observed, highlighting its promising potential in practical application. This novel strategy toward the simultaneous exfoliation and functionalization for graphene demonstrates a simple yet very effective approach for fabricating graphene-based flame retardants.

High-Performance Poly(ethylene oxide)/Molybdenum Disulfide Nanocomposite Films: Reinforcement of Properties Based on the Gradient Interface Effect

Herein, the molybdenum disulfide (MoS2) was simultaneously exfoliated and noncovalently functionalized by ultrasonication in a Pluronic aqueous solution and then was used to prepare the poly(ethylene oxide) (PEO) based nanocomposite films. The homogeneous dispersion of MoS2 and strong nanosheets/matrix interfacial adhesion were confirmed by representative electron microscopes. The considerable barrier action of the effective MoS2 nanosheets obviously restricted the ordering of crystal lamellae and the motion of polymer chains and then resulted in the formation of the devastated spherocrystal structure and morphological alterations in the nanocomposites, which were confirmed by polarized optical microscopy and the high value of the glass transition temperature. Importantly, MoS2 nanosheets hold great promise in reinforcing the thermal stability and mechanical property of polymer by increasing the effective volume of MoS2 nanosheets. A substantial reinforcement effect of PEO/MoS2 composite films was achieved: even at a relatively low loading level (0.9 wt %), 88.1% increase in Young's modulus, 72.7% increase in stress-at-failure, and 62.1 °C increment of the temperature corresponding to half weight loss were obtained. These significant reinforcements can be attributed to the gradient interface region, which could effectively transfer the stress from the weak polymer chains to the robust nanosheets, thus endowing the PEO/MoS2 composite films with excellent properties.

Ethanol–NaOH solidification method to intensify chitosan/poly(vinyl alcohol)/attapulgite composite film

Chitosan/poly(vinyl alcohol) (CS/PVA) films have recently attracted considerable attention.

Preparation of PVA nanocomposites using salep-reduced graphene oxide with enhanced mechanical and biological properties

Hydrogel and film nanocomposites based on PVA with desired mechanical properties are prepared using salep functionalized rGO and proposed as new biomaterials for tissue engineering applications.

Self-assembly fabrication of a graphene/multi-walled carbon nanotube hybrid material for suppressing potential heat radiation and toxic effluent

Negative graphene oxide was combined with positive chitosan-modified multi-walled carbon nanotubes in aqueous solution and then thermally reduced to fabricate a multi-walled carbon nanotube/graphene (MWCNT/G) hybrid material.

Functionalized chitosan derived novel positively charged organic–inorganic hybrid ultrafiltration membranes for protein separation

Positively charged organic–inorganic hybrid ultrafiltration membranes for selective protein separation were fabricated from blends of PVA, functionalized600 dpi in TIF format)??> chitosan and tetraethylorthosilicate.