H2 Purification Durability of Dimethoxydiphenylsilane-Derived Silica Membranes with H2–Toluene Mixtures

Bench-Scale Membrane Reactor for Methylcyclohexane Dehydrogenation Using Silica Membrane Module

Methylcyclohexane-toluene system is one of the most promising methods for hydrogen transport/storage. The methylcyclohexane dehydrogenation can be exceeded by the equilibrium conversion using membrane reactor. However, the modularization of the membrane reactor and manufacturing longer silica membranes than 100 mm are little developed. Herein, we have developed silica membrane with practical length by a counter-diffusion chemical vapor deposition method, and membrane reactor module bundled multiple silica membranes. The developed 500 mm-length silica membrane had high hydrogen permselective performance (H₂ permeance > 1 × 10⁻⁶ mol m⁻² s⁻¹ Pa⁻¹, H₂/SF₆ selectivity > 10,000). In addition, we successfully demonstrated effective methylcyclohexane dehydrogenation using a flange-type membrane reactor module, which was installed with 6 silica membranes. The results indicated that conversion of methylcyclohexane was around 85% at 573 K, whereas the equilibrium conversion was 42%.

Synthesis of Silica Membranes by Chemical Vapor Deposition Using a Dimethyldimethoxysilane Precursor

Silica-based membranes prepared by chemical vapor deposition of tetraethylorthosilicate (TEOS) on γ-alumina overlayers are known to be effective for hydrogen separation and are attractive for membrane reactor applications for hydrogen-producing reactions. In this study, the synthesis of the membranes was improved by simplifying the deposition of the intermediate γ-alumina layers and by using the precursor, dimethyldimethoxysilane (DMDMOS). In the placement of the γ-alumina layers, earlier work in our laboratory employed four to five dipping-calcining cycles of boehmite sol precursors to produce high H₂ selectivities, but this took considerable time. In the present study, only two cycles were needed, even for a macro-porous support, through the use of finer boehmite precursor particle sizes. Using the simplified fabrication process, silica-alumina composite membranes with H₂ permeance > 10^-7 mol m^-2 s^-1 Pa^-1 and H₂/N₂ selectivity >100 were successfully synthesized. In addition, the use of the silica precursor, DMDMOS, further improved the H₂ permeance without compromising the H₂/N₂ selectivity. Pure DMDMOS membranes proved to be unstable against hydrothermal conditions, but the addition of aluminum tri-sec-butoxide (ATSB) improved the stability just like for conventional TEOS membranes.

Gas Separation Silica Membranes Prepared by Chemical Vapor Deposition of Methyl-Substituted Silanes

The effect on the gas permeance properties and structural morphology of the presence of methyl functional groups in a silica membrane was studied. Membranes were synthesized via chemical vapor deposition (CVD) at 650 °C and atmospheric pressure using three silicon compounds with differing numbers of methyl- and methoxy-functional groups: tetramethyl orthosilicate (TMOS), methyltrimethoxysilane (MTMOS), and dimethyldimethoxysilane (DMDMOS). The residence time of the silica precursors in the CVD process was adjusted for each precursor and optimized in terms of gas permeance and ideal gas selectivity criteria. Final H₂ permeances at 600 °C for the TMOS-, MTMOS-, and DMDMOS-derived membranes were respectively 1.7 × 10^-7, 2.4 × 10^-7, and 4.4 × 10^-8 mol∙m^-2∙s^-1∙Pa^-1 and H₂/N₂ selectivities were 990, 740, and 410. The presence of methyl groups in the membranes fabricated with the MTMOS and DMDMOS precursors was confirmed via Fourier-transform infrared (FTIR) spectroscopy. From FTIR analysis, an increasing methyl signal in the silica structure was correlated with both an improvement in the hydrothermal stability and an increase in the apparent activation energy for hydrogen permeation. In addition, the permeation mechanism for several gas species (He, H₂, Ne, CO₂, N₂, and CH₄) was determined by fitting the gas permeance temperature dependence to one of three models: solid state, gas-translational, or surface diffusion.

Organosilica Membrane with Ionic Liquid Properties for Separation of Toluene/H₂ Mixture

In this study, we present a new concept in chemically stabilized ionic liquid membranes: an ionic liquid organosilica (ILOS) membrane, which is an organosilica membrane with ionic liquid-like properties. A silylated ionic liquid was used as a precursor for synthesis. The permselectivity, permeation mechanism, and stability of the membrane in the H₂/toluene binary system were then compared with a supported ionic liquid membrane. The membrane showed a superior separation factor of toluene/H₂ (>17,000) in a binary mixture system based on a solution–diffusion mechanism with improved durability over the supported ionic liquid membrane.