Mesoporous Mn0.5Co0.5Fe2O4 Nanospheres Grown on Graphene for Enhanced Lithium Storage Properties

A hybrid composite of H2V3O8 and graphene for aqueous lithium-ion batteries with enhanced electrochemical performance

Aqueous rechargeable lithium-ion batteries (ARLBs) are regarded as a competitive challenger for large-scale energy storage systems because of their high safety, modest cost, and green nature. A kind of modified composite material composed of H₂V₃O₈ nanorods and graphene sheets (HVO/G) has been effectively made by a one-step hydrothermal method and following calcination at 523 K. XRD, SEM, TEM, and TG are used to determine the phase structures and morphologies of the composite materials. Owing to the advantage of the layered structure of H₂V₃O₈ nanorods, the excellent conductivity of the graphene sheets, and the 3D network structure of the modified composite, the ARLBs with HVO/G can deliver an adequate specific capacity of 271 mA h g^-1 at 200 mA g^-1 and have a retention rate of 73.4% after 50 cycles. The average discharge capacity of ARLB with HVO/G as anode has a considerable improvement over that of HVO/CNTs and HVO, whatever the current rate used. Moreover, we find that the diffusion coefficient of lithium-ion increases by an order of magnitude through the theoretical calculation for HVO/G ARLB. The new ARLB with HVO/G electrode is a potential energy storage system with great advantages, such as simple preparation, easy assembly process, excellent safety and low-cost environmental protection.

The influence of cobalt manganese ferrite nanoparticles (Co0.5Mn0.5Fe2O4) on reduction of hazardous effects of vanadate in adult rats

Effect of cobalt manganese ferrite nanoparticles (M-NPs) (Co0.5Mn0.5Fe2O4) on vanadium hazards was assessment in the present study. Four groups of adult male albino rats [control group and three variably treated groups with ammonium metavanadate accompanied with or without cobalt M-NPs] were studied. The oral administration of ammonium metavanadate (Am.V) (20 mg/kg b.wt.) demonstrated the facility of vanadium to distribute and accumulate in the distinctive body organs and ordered as kidney > liver > lung > brain > spleen. Also, Am.V administration induce a significant disturbance in many physiological parameters (RBS, cholesterol, triglyceride, aspartate transaminase, alanine transaminase, Alb., bilirubin, Alk.Ph., urea, creat., Hb%, red blood cell count and packed cell volume) which might be expected to the liberation of free radicals according to the vanadium intoxication or its ability to disturb many body metabolisms. On the other hand, the intraperitoneal administration of 5% M-NPs in parallel with Am.V orally administration showed the ability of M-NPs to reduce Am.V dangerous impacts, which might be resulted from the essentiality of M-NPs metals to the body metabolism and to its free radicals scavenging properties. So, M-NPs could reduce Am.V hazardous effects.

Conversion Reaction-Based Oxide Nanomaterials for Lithium Ion Battery Anodes

Developing high-energy-density electrodes for lithium ion batteries (LIBs) is of primary importance to meet the challenges in electronics and automobile industries in the near future. Conversion reaction-based transition metal oxides are attractive candidates for LIB anodes because of their high theoretical capacities. This review summarizes recent advances on the development of nanostructured transition metal oxides for use in lithium ion battery anodes based on conversion reactions. The oxide materials covered in this review include oxides of iron, manganese, cobalt, copper, nickel, molybdenum, zinc, ruthenium, chromium, and tungsten, and mixed metal oxides. Various kinds of nanostructured materials including nanowires, nanosheets, hollow structures, porous structures, and oxide/carbon nanocomposites are discussed in terms of their LIB anode applications.

3-Dimensional cuboid structured ZnFe2O4@C nano-whiskers as anode materials for lithium-ion batteries based on the in situ graft polymerization method

3-Dimensional cuboid structured ZnFe₂O₄@C nano-whiskers anode materials have been successfully synthesized via an in situ graft copolymerization method and the subsequent calcination process.

High-performance nickel manganese ferrite/oxidized graphene composites as flexible and binder-free anodes for Li-ion batteries

The obtained binder-free and flexible free-standing Ni_0.5Mn_0.5Fe₂O₄/oxidized graphene (NMFO/OGP) and NMFO/OGP coated on polypropylene microporous film exhibited good electrochemical performance.

Three dimensional metal oxides–graphene composites and their applications in lithium ion batteries

The review focuses on the effects of morphology, composition and interaction of 3d metal oxide–graphene composites on the performances of libs.

Corncob-shaped ZnFe2O4/C nanostructures for improved anode rate and cycle performance in lithium-ion batteries

The as-prepared corncob-shaped ZnFe₂O₄/C composite materials serve as anodes in lithium ion batteries and display high rate capability and enhanced recycling durability in comparison with pure ZnFe₂O₄ materials.

Mesoporous ZnCo2O4 microspheres as an anode material for high-performance secondary lithium ion batteries

The as-prepared mesoporous ZnCo₂O₄ microspheres showed a high specific capacity and excellent electrochemical performance when used as an anode material for lithium ion batteries.

Mn0.5Co0.5Fe2O4 nanoparticles highly dispersed in porous carbon microspheres as high performance anode materials in Li-ion batteries

We report the preparation of Mn(0.5)Co(0.5)Fe2O4 (MCFO) nanoparticles highly dispersed within porous carbon microspheres as anodes for Li-ion batteries. In situ growth of MCFO nanoparticles (5-20 nm) on the surface of carbon black (CB) and graphitized carbon black (GCB) nanoparticles was conducted via a hydrothermal method to form MCFO-CB and MCFO-GCB composites, respectively, which were employed as building blocks to assemble MCFO-CB and MCFO-GCB porous microspheres (PM) with a size of 5-30 μm by the spray drying technique using sucrose as a binder, and followed by carbonization in N2 (labeled as MCFO-CB-PM and MCFO-GCB-PM, respectively). Compared with the pure MCFO, MCFO-CB, and MCFO-GCB, both MCFO-CB-PM and MCFO-GCB-PM showed a significantly improved electrochemical performance. This is attributed to their unique porous structure, in which, the abundant pores promote the diffusion of Li-ion and electrolyte solution, the microspherical morphology enhances the electrode-electrolyte contact, and the carbon substrates from CB (and GCB) and sucrose substantially prevent the aggregation of MCFO nanoparticles and buffer the volume change. Particularly, MCFO-GCB-PM exhibits the best rate performance and excellent cycling stability because of the high graphitization degree of GCB. This work opens up an effective route for large scale fabrication of metal oxide/carbon porous microspheres as anode materials for potential applications in the new generation of Li-ion batteries.

Ni0.33Mn0.33Co0.33Fe2O4 nanoparticles anchored on oxidized carbon nanotubes as advanced anode materials in Li-ion batteries

Ni_0.33Mn_0.33Co_0.33Fe₂O₄ nanoparticles anchored on oxidized carbon nanotubes as anode materials exhibit a significantly improved electrochemical performance in Li-ion batteries.