Lignin and Lignosulfonate-Based Formulations To Protect Pyrethrins against Photodegradation and Volatilization

Multilamellar spherical micelles of alkali lignin: dissipative particle dynamics simulations

CONTEXT

Lignin has an immense potential for the production of lignin-based functional materials. In this work, effect of 2-chloro-ethyltrimethyl ammonium chloride (AC)-grafted alkali lignin (AL) on the morphologies in water was investigated by dissipative particle dynamics (DPD) simulations. The results showed that AL molecules formed spherical micelles, but the corresponding phenylpropane units of AL were randomly distributed in spherical micelles. However, AC-grafted modification of phenolic hydroxyl groups in AL led to the formation of multilamellar spherical micelles. The formation of multilamellar spherical micelles of AL mainly went through four stages: small clusters, larger aggregates with a core-shell structure, trilaminar, and multilamellar spherical micelles. AL molecules resulted in dimethomorph molecules being randomly distributed in the spherical micelle, while the dimethomorph molecules were perfectly entrapped into the spherical micelles of AC-grafted AL. Various molecular weights of AL had no effect on the formation and size of multilamellar spherical micelles. With increasing the content of AC-grafted AL, small clusters, multilamellar spherical micelles, tube-like, and lamellar aggregates were observed successively. This work highlights the potential of lignin to prepare monodispersed lignin-based functional colloidal spheres.

METHODS

Coarse-grained beads were performed energy minimization, geometric optimization, NPT ensemble (298 K and 1.0 bar), and NVT ensemble (298 K) calculations. DPD simulations were carried out at 300,000 steps in a 30×30×30 Rc³ cubic box with Materials Studio 7.0 program.

Preparation and characterization of biodegradable lignin-sulfonate nanoparticles using the microemulsion method to enhance the acetylation efficiency of lignin-sulfonate

In this study, a novel method is presented for producing lignin-sulfonate nanoparticles. Then, the effect of produced nanoparticles is investigated on enhancing the acetylation efficiency. For these purposes, lignin-sulfonate was isolated from black-liquor of pulp-and-paper mill wastewater. Next, lignin-sulfonate nanoparticles were obtained using the oil-in-water (O/W) microemulsion, followed by modification of micro/nano-lignin-sulfonate particles. The physical, chemical, and morphological properties of lignin sulfonate micro/nanoparticles and modified forms of both samples were analyzed using FTIR, DLS, FE-SEM, AFM, ¹H NMR, and ¹³CNMR analyses. Surface morphology revealed that the nanoparticles were homogenized and spherical with an average diameter of 25.5 nm. The chemical structure of the nanoparticles was similar to that of the microparticles. On the other hand, the chemical structure of acetylated lignin-sulfonate was slightly different from that of unmodified samples. The results also showed that the production of nano-lignin-sulfonate increased the acetylation efficiency and reduced the time and temperature of acetylation.

Release-controlled microcapsules of thiamethoxam encapsulated in beeswax and their application in field

Using beeswax as wrapping matrix, two types of release-controlled TM (thiamethoxam)/BK(beeswax-kaolin) microcapsules were prepared by adsorbing TM on kaolin and then encapsulated with beeswax, or directly wrapping TM with beeswax. The structure and morphology of the TM/BK microcapsules were characterized. The effects of different preparation methods, the particle size, pH conditions and different additives on the release property of the TM/BK microcapsules were investigated in water and soil column to compare the advantages of the two approaches. Finally, the insecticidal effect of the TM/BK microcapsules against sugarcane borer and rice planthopper was tested. The results show that the TM/BK microcapsules have a better sustained-release in both water and soil, and the release rate is different under different pH conditions. In addition, the releasing time of the TM/BK microcapsules can be modified by different preparation methods and combination of different additives. In the field applications, the insecticidal activity of the TM/BK microcapsules was better than that of non-sustained control group. Especially in the rice field test, 45 days after the application, the control group lost the activity against rice planthopper because of drug loss, whereas the TM/BK microcapsule group still retained about 90% of the insecticidal activity. The results suggest that the microcapsules have better agricultural application for insect control.

Biodegradable poly(3-hydroxybutyrate-co-4-hydroxybutyrate) microcapsules for controlled release of trifluralin with improved photostability and herbicidal activity

Microencapsulation of pesticide is a promising technology to reduce the negative environmental impact and benefit the sustainable development. Trifluralin, commonly used as a selective pre-emergence herbicide, is vulnerably subject to loss by volatilization and decomposition by sunlight when applied to the surface of soils. In the present study, trifluralin has been encapsulated using biodegradable poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (PHB) polymers as carriers to develop controlled release formulations. PHB trifluralin microcapsules were obtained using a convenient solvent evaporation method. The influences of preparation parameters on the size and its distribution of the microcapsules were discussed. The particle size decreased from 4.44 μm to 2.50 μm as the shearing speeds increased from 4000 r/min to 12,000 r/min, and the value decreased from 3.64 μm to 3.23 μm as the mass fraction of emulsifier polyvinyl alcohol increased from 0.5% to 2.0%. The loading content (LC) as well as the encapsulation efficiency (EE) of trifluralin microcapsules are multiple factors dependent. Orthogonal table L9(3⁴) was designed and range analysis was used to suggest the optimal preparation parameters. When performed under the optimized conditions, the corresponding LC and EE were 16.50% and 90.65%, respectively. The release of trifluralin from PHB microcapsules showed slow and sustained patterns, which could be easily achieved by modifying the preparation parameters including shearing speed and concentration of emulsifier. Compared to conventional trifluralin formulation of emulsifiable concentrate, trifluralin microcapsules exhibited significantly improved photostability and herbicidal activity against target weed barnyardgrass. These results demonstrated that microencapsulation with PHB could dramaticlly improve the effective utilization rate and decrease the dosage of such agricultural chemicals.

Formulation approaches to reduce post-application pesticide volatilisation from glass surfaces

Volatilisation is one of the main pathways for pesticide emission to the atmosphere. While formulation strategies and adjuvants are known to affect the fate of active ingredient, no general volatilisation reducing guidelines exist for formulation purposes. Moreover, as limited information on formulation effects is available, current pesticide fate models lack parameters characterising reduction of active ingredient volatilisation. The objective of this study was to investigate the volatilisation reducing potential of formulation types and adjuvants, and to propose an effective vapour pressure for pesticide fate modelling. Several formulations of fenpropimorph, pyrimethanil and tebuconazole were produced and tested in a wind tunnel to evaluate the effect of formulation on active ingredient volatilisation. Produced emulsifiable concentrates with high volatile solvents did not offer any reduction in volatilisation, while the low volatile solvent reduced the volatilisation of pyrimethanil and fenpropimorph with 79.2 and 52.9%, respectively. The microemulsion reduced the volatilisation of fenpropimorph, pyrimethanil and tebuconazole with 57.6, 57.8 and 49.8%, respectively. High surfactant-active ingredient ratios (100:1) reduced the volatilisation of applied amount of pyrimethanil with 50%, on average. The effective vapour pressure of pyrimethanil formulated as a commercial available suspension concentrate was reduced by 33.8%. The commercial available emulsifiable concentrate did not reduce volatilisation of fenpropimorph. Effective vapour pressures of formulated fenpropimorph and pyrimethanil were determined and showed a high correlation with the amount volatilised within 48h. The saturated vapour pressure is useful when comparing the volatility of active ingredients, but effective vapour pressures are more appropriate to be used in pesticide fate models.

Lignosulfonate Improves Photostability and Bioactivity of Abscisic Acid under Ultraviolet Radiation

Abscisic acid (ABA), as a commonly used plant growth regulator, is easy to be degraded and lose its bioactivity under sunshine. To select an eco-friendly and efficient photoprotectant for the improvement of photostability and bioactivity of ABA when exposed to ultraviolet (UV) light, we tested the effects of three biodegradable natural-derived high polymers, sodium lignosulfonates 3A [molecular weight (MW) > 50000, with degree of sulfonation (DS) of 0.48] and NA (20000 < MW < 50000, with DS of 0.7) and calcium lignosulfonate CASA (MW < 20000, with DS of 0.7), on the photodegradation of ABA. Lignosulfonates 3A, NA, and CASA showed significant photostabilizing capability on ABA. Lignosulfonate 3A showed preferable photostabilizing effects on ABA compared to CASA, while NA showed an intermediate effect. That indicated that lignosulfonate with a high MW and low DS had a stronger UV absorption and the hollow aggregate micelles formatted by lignosulfonate protect ABA from UV damage. Approximately 50% more ABA was kept when 280 mg/L ABA aqueous solution was irradiated by UV light for 2 h in the presence of 2000 mg/L lignosulfonate 3A. The bioactivity on wheat (JIMAI 22) seed germination was greatly kept by 3A in comparison to that of ABA alone. The 300 times diluent of 280 mg/L ABA plus 2000 mg/L 3A after 2 h of irradiation showed 20.8, 19.3, and 9.3% more inhibition on shoot growth, root growth, and root numbers of wheat seed, separately, in comparison to ABA diluent alone. We conclude that lignosulfonate 3A was an eco-friendly and efficient agent to keep ABA activity under UV radiation. This research could be used in UV-sensitive and water-soluble agrichemicals and to optimize the application times and dosages of ABA products.