1
|
Luo M, Liu J, Zhang Y, Wang T, Ren X, Gui L, Zhao J, Zhang X, Tang Y, Zeng Z, Hou F, Zhong Q, Yuan Z, Xu H. Amine response smartphone-based portable and intelligent polyvinyl alcohol films for real-time detection of shrimp freshness. Food Chem 2024; 450:139347. [PMID: 38653047 DOI: 10.1016/j.foodchem.2024.139347] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/30/2024] [Revised: 04/03/2024] [Accepted: 04/10/2024] [Indexed: 04/25/2024]
Abstract
Food freshness monitoring is an important component in ensuring food safety for consumers and the food industry. Therefore, there is an urgent need for a portable, low-cost, and efficient detection method to determine the freshness. In this study, polyvinyl alcohol (PVA) was used as polymer carrier to prepare electrospinning film containing curcumin (Cur) and gardenia blue (GB) as intelligent indicator label on food packaging for real-time nondestructive detection of freshness of shrimp. The detection limit of ammonia response is less than or equal to 20 ppm, and the detection time is about 1 min, indicating that it has a sensitive response effect. At the same time, a smartphone application that can identify amines in response to color changes has been developed, and consumers can understand freshness by scanning the label. This study demonstrates the huge potential of smart indicator labels for food freshness monitoring.
Collapse
Affiliation(s)
- Man Luo
- Department of Food Quality and Safety, College of Food Science and Engineering, Nanjing University of Finance and Economics, Nanjing 210023, China; Department of Biomedical Engineering, School of Engineering, China Pharmaceutical University, 639 Longmian Road, Jiangning District, Nanjing 210009, China
| | - Ji Liu
- Department of Biomedical Engineering, School of Engineering, China Pharmaceutical University, 639 Longmian Road, Jiangning District, Nanjing 210009, China
| | - Yating Zhang
- Department of Food Quality and Safety, College of Food Science and Engineering, Nanjing University of Finance and Economics, Nanjing 210023, China
| | - Tao Wang
- Department of Biomedical Engineering, School of Engineering, China Pharmaceutical University, 639 Longmian Road, Jiangning District, Nanjing 210009, China
| | - Xiaomei Ren
- Department of Food Quality and Safety, College of Food Science and Engineering, Nanjing University of Finance and Economics, Nanjing 210023, China
| | - Lijuan Gui
- Department of Biomedical Engineering, School of Engineering, China Pharmaceutical University, 639 Longmian Road, Jiangning District, Nanjing 210009, China
| | - Junyuan Zhao
- Department of Biomedical Engineering, School of Engineering, China Pharmaceutical University, 639 Longmian Road, Jiangning District, Nanjing 210009, China
| | - Xuwei Zhang
- Department of Food Quality and Safety, College of Food Science and Engineering, Nanjing University of Finance and Economics, Nanjing 210023, China
| | - Yunqing Tang
- Department of Biomedical Engineering, School of Engineering, China Pharmaceutical University, 639 Longmian Road, Jiangning District, Nanjing 210009, China
| | - Ziting Zeng
- Department of Food Quality and Safety, College of Food Science and Engineering, Nanjing University of Finance and Economics, Nanjing 210023, China
| | - Fengzhen Hou
- Department of Biomedical Engineering, School of Engineering, China Pharmaceutical University, 639 Longmian Road, Jiangning District, Nanjing 210009, China
| | - Qifeng Zhong
- Department of Biomedical Engineering, School of Engineering, China Pharmaceutical University, 639 Longmian Road, Jiangning District, Nanjing 210009, China
| | - Zhenwei Yuan
- Department of Biomedical Engineering, School of Engineering, China Pharmaceutical University, 639 Longmian Road, Jiangning District, Nanjing 210009, China
| | - Hui Xu
- Department of Food Quality and Safety, College of Food Science and Engineering, Nanjing University of Finance and Economics, Nanjing 210023, China.
| |
Collapse
|
2
|
Geleta TA, Maggay IV, Chang Y, Venault A. Recent Advances on the Fabrication of Antifouling Phase-Inversion Membranes by Physical Blending Modification Method. MEMBRANES 2023; 13:58. [PMID: 36676865 PMCID: PMC9864519 DOI: 10.3390/membranes13010058] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/04/2022] [Revised: 12/16/2022] [Accepted: 12/19/2022] [Indexed: 05/31/2023]
Abstract
Membrane technology is an essential tool for water treatment and biomedical applications. Despite their extensive use in these fields, polymeric-based membranes still face several challenges, including instability, low mechanical strength, and propensity to fouling. The latter point has attracted the attention of numerous teams worldwide developing antifouling materials for membranes and interfaces. A convenient method to prepare antifouling membranes is via physical blending (or simply blending), which is a one-step method that consists of mixing the main matrix polymer and the antifouling material prior to casting and film formation by a phase inversion process. This review focuses on the recent development (past 10 years) of antifouling membranes via this method and uses different phase-inversion processes including liquid-induced phase separation, vapor induced phase separation, and thermally induced phase separation. Antifouling materials used in these recent studies including polymers, metals, ceramics, and carbon-based and porous nanomaterials are also surveyed. Furthermore, the assessment of antifouling properties and performances are extensively summarized. Finally, we conclude this review with a list of technical and scientific challenges that still need to be overcome to improve the functional properties and widen the range of applications of antifouling membranes prepared by blending modification.
Collapse
Affiliation(s)
| | | | - Yung Chang
- R&D Center for Membrane Technology, Department of Chemical Engineering, Chung Yuan Christian University, Chung-Li 32023, Taiwan
| | - Antoine Venault
- R&D Center for Membrane Technology, Department of Chemical Engineering, Chung Yuan Christian University, Chung-Li 32023, Taiwan
| |
Collapse
|
3
|
Aini HN, Maggay I, Chang Y, Venault A. A Green Stable Antifouling PEGylated PVDF Membrane Prepared by Vapor-Induced Phase Separation. MEMBRANES 2022; 12:1277. [PMID: 36557184 PMCID: PMC9784106 DOI: 10.3390/membranes12121277] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/05/2022] [Revised: 12/10/2022] [Accepted: 12/13/2022] [Indexed: 06/17/2023]
Abstract
While green solvents are being implemented in the fabrication of polyvinylidene fluoride (PVDF) membranes, most are not compatible with the vapor-induced phase separation (VIPS) process for which relatively low dissolution temperatures are required. Additionally, preparing antifouling green membranes in one step by blending the polymer with an antifouling material before inducing phase separation remains extremely challenging due to the solubility issues. Here, the green solvent triethyl phosphate (TEP) was used to solubilize both PVDF and a copolymer (synthesized from styrene monomer and poly(ethylene glycol) methyl ether methacrylate). VIPS was then used, yielding symmetric bi-continuous microfiltration membranes. For a 2 wt% copolymer content in the casting solution, the corresponding membrane P2 showed a homogeneous and dense surface distribution of the copolymer, resulting in a high hydration capacity (>900 mg/cm3) and effective resistance to biofouling during the adsorption tests using bovine serum albumin, Escherichia coli or whole blood, with a measured fouling reduction of 80%, 89% and 90%, respectively. Cyclic filtration tests using bacteria highlighted the competitive antifouling properties of the membranes with a flux recovery ratio after two water/bacterial solution cycles higher than 70%, a reversible flux decline ratio of about 62% and an irreversible flux decline ratio of 28%. Finally, these green antifouling membranes were shown to be stable despite several weeks of immersion in water.
Collapse
|
4
|
Mkpuma VO, Moheimani NR, Fischer K, Schulze A, Ennaceri H. Membrane surface zwitterionization for an efficient microalgal harvesting: A review. ALGAL RES 2022. [DOI: 10.1016/j.algal.2022.102797] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
5
|
Zhang Y, Wang C, Zhang L, Shi J, Yuan H, Lu J. Doubly modified MWCNTs embedded in polyethersulfone (PES) ultrafiltration membrane and its anti-fouling performance. JOURNAL OF POLYMER ENGINEERING 2022. [DOI: 10.1515/polyeng-2022-0021] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
Abstract
Multiwall carbon nanotubes (MWCNTs) are often used to modify polymer membranes as additives, however, MWCNTs are easy to agglomerate and entangle in polymer matrix due to their own strong van der Waals force. MWCNTs were doubly modified by bonding octadecylamine (ODA) and SiO2 through the respective amidation and esterification reactions to prepare SiO2-MWCNT-ODA nanocomposites. The amino groups on ODA were amidated with the carboxyl groups on MWCNT-COOH. Then the hydroxyl groups on SiO2 were bonded to MWCNT-COOH through esterification to obtain SiO2-MWCNT-ODA nanocomposites. PES/SiO2-MWCNT-ODA composite ultrafiltration (UF) membrane was prepared by non-solvent induced phase separation (NIPS) method. SiO2-MWCNT-ODA nanocomposites and PES/SiO2-MWCNT-ODA membrane were characterized by FTIR, XRD, TGA, and SEM, etc. The results showed that PES/SiO2-MWCNT-ODA membrane had significantly improved permeability, rejection, and antifouling properties for comparison with PES membrane. The pure water flux of PES/Nano.2-0.5 reached 212.5 L m−2 h−1, which was approximately 2.6 times than that of PES membrane, and the rejection of BSA protein for composite membrane was as high as 94.2%. PES/SiO2-MWCNT-ODA composite membrane had excellent antifouling performance and the flux recovery rate (FRR) of PES/Nano.2-0.5 membrane could still maintain at higher value of 84.82% after two cycles in the antifouling test.
Collapse
Affiliation(s)
- Yadi Zhang
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science , Shanghai 201620 , China
| | - Chengcong Wang
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science , Shanghai 201620 , China
| | - Lijuan Zhang
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science , Shanghai 201620 , China
| | - Jianghuan Shi
- Ningbo Institute of Metrology , Ningbo 315048 , China
| | - Haikuan Yuan
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science , Shanghai 201620 , China
| | - Jie Lu
- College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science , Shanghai 201620 , China
| |
Collapse
|
6
|
Sun H, Qu Z, Yu J, Ma H, Li B, Sun D, Ge Y. Asymmetric 5-sulfosalicylic acid-PVA catalytic pervaporation membranes for the process intensification in the synthesis of ethyl acetate. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2021.120113] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
7
|
Sima Mirzadeh S, Amirinejad M. Surface water treatment for production of potable water by coagulation/filtration/nanofiltration membranes hybrid system. WATER ENVIRONMENT RESEARCH : A RESEARCH PUBLICATION OF THE WATER ENVIRONMENT FEDERATION 2021; 93:1391-1401. [PMID: 33598965 DOI: 10.1002/wer.1532] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/10/2020] [Revised: 01/29/2021] [Accepted: 02/01/2021] [Indexed: 06/12/2023]
Abstract
Providing potable water will be a challenge for humanity over the next years. In this research, water samples from the Gamasiab River (Iran) were purified to achieve drinking water by applying coagulation, conventional filtration in combination with the nanofiltration process. By using poly aluminum chloride as a coagulant, the turbidity decreased by 96.4%. The turbidity and COD decreased by 98.82% and 32.7%, respectively, via passing the effluent through the activated carbon. Membranes were made of polyethersulfone (PES). Cesium hydrogen phosphotungstic acid (Cs0.5 H2.5 PW12 O40 as CsPW) nanoparticles were incorporated into the polymer matrix to improve the hydrophilicity. The morphology of membranes was studied using the FE-SEM and AFM. The pure water flux and contact angle for the sulfonated PES with 1.5 wt.% CsPW were 51.9 kg/m2 h and 55.49 °, respectively. The percentage of the turbidity, conductivity, TDS, and COD removal was found to be 99.9, 89.3, 89.3, and 86.6%, respectively, after the hybrid process. The removal of calcium, magnesium, nitrate, chloride, sodium, sulfate, and bicarbonate ions was 90.5, 83.4, 87.9, 60.7, 49, 86, and 80.5%, respectively. Based on these results, the river water meets the standards for drinking water after being purified by applying the aforementioned coagulation/filtration and nanofiltration processes. PRACTITIONER POINTS: The treatment of the Gamasiab River (Iran) was selected for this study to produce potable water. A hybrid systematic coagulation/filtration/nanofiltration (NF) was considered. Water quality parameters were measured and compared with the standard values. The cesium hydrogen phosphotungstic acid was incorporated into the NF to increase the hydrophilicity and water flux. Polyethersulfone was sulfonated to add the sulfonyl group to the polymer.
Collapse
Affiliation(s)
- Seyedeh Sima Mirzadeh
- Membrane Research Center, Faculty of Petroleum and Chemical Engineering, Razi University, Kermanshah, Iran
| | - Mehdi Amirinejad
- Membrane Research Center, Faculty of Petroleum and Chemical Engineering, Razi University, Kermanshah, Iran
| |
Collapse
|
8
|
Wang C, Zhang L, Yuan H, Fu Y, Zeng Z, Lu J. Preparation of a PES/PFSA- g-MWCNT ultrafiltration membrane with improved permeation and antifouling properties. NEW J CHEM 2021. [DOI: 10.1039/d0nj05322h] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
In this study, perfluorosulfonic acid (PFSA) was firstly grafted on multi-walled carbon nanotubes (MWCNTs) to obtain PFSA-g-MWCNT nanocomposites.
Collapse
Affiliation(s)
- Chengcong Wang
- College of Chemistry and Chemical Engineering
- Shanghai University of Engineering Science
- Shanghai 201620
- China
| | - Lijuan Zhang
- College of Chemistry and Chemical Engineering
- Shanghai University of Engineering Science
- Shanghai 201620
- China
| | - Haikuan Yuan
- College of Chemistry and Chemical Engineering
- Shanghai University of Engineering Science
- Shanghai 201620
- China
| | - Yujia Fu
- College of Chemistry and Chemical Engineering
- Shanghai University of Engineering Science
- Shanghai 201620
- China
| | - Zheng Zeng
- College of Chemistry and Chemical Engineering
- Shanghai University of Engineering Science
- Shanghai 201620
- China
| | - Jie Lu
- College of Chemistry and Chemical Engineering
- Shanghai University of Engineering Science
- Shanghai 201620
- China
| |
Collapse
|
9
|
Zhang S, Yuan H, Wang C, Liu X, Lu J. Antifouling performance enhancement of polyethersulfone ultrafiltration membrane through increasing charge‐loading capacity over Prussian blue nanoparticles. J Appl Polym Sci 2020. [DOI: 10.1002/app.49410] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Affiliation(s)
- Shuai Zhang
- School of Chemistry and Chemical EngineeringShanghai University of Engineering Science Shanghai China
| | - Haikuan Yuan
- School of Chemistry and Chemical EngineeringShanghai University of Engineering Science Shanghai China
| | - Chengcong Wang
- School of Chemistry and Chemical EngineeringShanghai University of Engineering Science Shanghai China
| | - Xiaodi Liu
- School of Chemistry and Chemical EngineeringShanghai University of Engineering Science Shanghai China
| | - Jie Lu
- School of Chemistry and Chemical EngineeringShanghai University of Engineering Science Shanghai China
| |
Collapse
|
10
|
Tian H, Yuan L, Wang J, Wu H, Wang H, Xiang A, Ashok B, Rajulu AV. Electrospinning of polyvinyl alcohol into crosslinked nanofibers: An approach to fabricate functional adsorbent for heavy metals. JOURNAL OF HAZARDOUS MATERIALS 2019; 378:120751. [PMID: 31220648 DOI: 10.1016/j.jhazmat.2019.120751] [Citation(s) in RCA: 26] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/25/2019] [Revised: 05/24/2019] [Accepted: 06/07/2019] [Indexed: 06/09/2023]
Abstract
Electrospun nanofibers have a wide range of applications due to their unique miniature size and accompanying ultra-high specific surface area. Polyvinyl alcohol(PVA) is a kind of hydrophilic materials, and hence its nanofiber morphology prepared by electrospinning disappeared after solution immersing. In the present work, crosslinked PVA nanofibers were prepared by electrospinning and then employing glutaraldehyde vapor crosslinking to improve their water resistance and mechanical properties. As an application, these nanofibers were used to adsorb Cu2+ and Pb2+ according to varying crosslinking time and different concentrations of ionic solution. It was observed the crosslinked PVA nanofiber films maintained good fiber morphology after adsorption, while the nanofiber morphology of uncrosslinked samples was lost. The stability of the crosslinked nanofiber films in water was improved, the adsorption equilibrium time of Pb2+ decreased from 30 h to 10 h while the equilibrium adsorption time of Cu2+ decreased from 15 h to 5 h, and the tensile strength of the nanofiber films with crosslinking time of 20 h was 7.99 MPa, which was 240% higher than that of the nanofiber with crosslinking time of 1 h, indicating higher efficiency.
Collapse
Affiliation(s)
- Huafeng Tian
- Beijing Key Laboratory of Quality Evaluation Technology for Hygiene and Safety of Plastics, School of Material and Mechanical Engineering, Beijing Technology and Business University, Beijing 100048, China; State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510640, China.
| | - Li Yuan
- Beijing Key Laboratory of Quality Evaluation Technology for Hygiene and Safety of Plastics, School of Material and Mechanical Engineering, Beijing Technology and Business University, Beijing 100048, China
| | - Jianguo Wang
- College of Food Science and Engineering, Northwest A&F University, Yangling, Shananxi 712100, China
| | - Hao Wu
- College of Food Science and Engineering, Northwest A&F University, Yangling, Shananxi 712100, China
| | - Hailiang Wang
- Beijing Key Laboratory of Quality Evaluation Technology for Hygiene and Safety of Plastics, School of Material and Mechanical Engineering, Beijing Technology and Business University, Beijing 100048, China
| | - Aimin Xiang
- Beijing Key Laboratory of Quality Evaluation Technology for Hygiene and Safety of Plastics, School of Material and Mechanical Engineering, Beijing Technology and Business University, Beijing 100048, China.
| | - Basa Ashok
- Department of Physics, University college of Engineering, Osmania University, Hyderabad, India
| | - A Varada Rajulu
- Centre for Composite Materials, International Research Centre, Kalasalingam University, Krishnankovil, Virudhunagar, India
| |
Collapse
|
11
|
Hou S, Wang X, Dong X, Zheng J, Li S. Renewable antibacterial and antifouling polysulfone membranes incorporating a PEO-grafted amphiphilic polymer and N-chloramine functional groups. J Colloid Interface Sci 2019; 554:658-667. [DOI: 10.1016/j.jcis.2019.07.049] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/04/2019] [Revised: 07/16/2019] [Accepted: 07/17/2019] [Indexed: 11/24/2022]
|
12
|
Thakur AK, Singh SP, Kleinberg MN, Gupta A, Arnusch CJ. Laser-Induced Graphene-PVA Composites as Robust Electrically Conductive Water Treatment Membranes. ACS APPLIED MATERIALS & INTERFACES 2019; 11:10914-10921. [PMID: 30794741 DOI: 10.1021/acsami.9b00510] [Citation(s) in RCA: 34] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/18/2023]
Abstract
Graphene nanomaterials can feature both superb electrical conductivity and unique physical properties such as extreme surface wettability, which are potentially applicable for many purposes including water treatment. Laser-induced graphene (LIG) is an electrically conductive three-dimensional porous carbon material prepared by direct laser writing on various polymers in ambient conditions with a CO2 laser. Low-fouling LIG coatings in water technology have been reported; however, the mechanical strength and the separation properties of LIG-coated membranes are limited. Here, we show mechanically robust electrically conductive LIG-poly(vinyl alcohol) (PVA) composite membranes with tailored separation properties suitable for ultrafiltration processes. PVA has outstanding chemical and physical stability with good film-forming properties and is a biocompatible and nontoxic polymer. Compared to LIG-coated filters, the PVA-LIG composite membrane filters exhibited up to 63% increased bovine serum albumin rejection and up to ∼99.9% bacterial rejection, which corresponded well to the measured molecular weight cutoff ∼90 kDa. Compared to LIG fabricated on a polymer membrane control, the composite membranes showed similar excellent antifouling properties including low protein adsorption, and the antibiofilm effects were more pronounced at lower PVA concentrations. Notably for the antibacterial capabilities, the LIG-supporting layer maintained its electrical conductivity and a selected LIG-PVA composite used as electrodes showed complete elimination of mixed bacterial culture viability and indicated that the potent antimicrobial killing effects were maintained in the composite. This work demonstrates that the use of LIG for practical industrial filtration applications is possible.
Collapse
Affiliation(s)
- Amit K Thakur
- Department of Desalination and Water Treatment, Zuckerberg Institute for Water Research, The Jacob Blaustein Institutes for Desert Research , Ben-Gurion University of the Negev , Sede-Boqer Campus , Midreshet Ben Gurion 84990 , Israel
| | - Swatantra P Singh
- Department of Desalination and Water Treatment, Zuckerberg Institute for Water Research, The Jacob Blaustein Institutes for Desert Research , Ben-Gurion University of the Negev , Sede-Boqer Campus , Midreshet Ben Gurion 84990 , Israel
- Center for Environmental Science and Engineering (CESE) , Indian Institute of Technology Bombay , Powai, Mumbai 400076 , India
| | - Maurício Nunes Kleinberg
- Department of Desalination and Water Treatment, Zuckerberg Institute for Water Research, The Jacob Blaustein Institutes for Desert Research , Ben-Gurion University of the Negev , Sede-Boqer Campus , Midreshet Ben Gurion 84990 , Israel
| | - Abhishek Gupta
- Department of Desalination and Water Treatment, Zuckerberg Institute for Water Research, The Jacob Blaustein Institutes for Desert Research , Ben-Gurion University of the Negev , Sede-Boqer Campus , Midreshet Ben Gurion 84990 , Israel
| | - Christopher J Arnusch
- Department of Desalination and Water Treatment, Zuckerberg Institute for Water Research, The Jacob Blaustein Institutes for Desert Research , Ben-Gurion University of the Negev , Sede-Boqer Campus , Midreshet Ben Gurion 84990 , Israel
| |
Collapse
|
13
|
Juxtaposition of PES based hollow fiber membrane: Antifouling and antibacterial potential of LiCl mediated PVA–ZnO blend. J IND ENG CHEM 2018. [DOI: 10.1016/j.jiec.2018.01.005] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
|
14
|
He Y, Chen X, Dai F, Xu R, Yang N, Feng X, Zhao Y, Chen L. Immobilization of poly(N-acryoyl morpholine) via hydrogen-bonded interactions for improved separation and antifouling properties of poly(vinylidene fluoride) membranes. REACT FUNCT POLYM 2018. [DOI: 10.1016/j.reactfunctpolym.2017.12.014] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
15
|
Ghaemi N, Daraei P, Palani S. Surface Modification of Polysulfone Membranes Using Poly(Acrylic Acid)-Decorated Alumina Nanoparticles. Chem Eng Technol 2017. [DOI: 10.1002/ceat.201700124] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
Affiliation(s)
- Negin Ghaemi
- Kermanshah University of Technology; Department of Chemical Engineering; 67178 Kermanshah Iran
| | - Parisa Daraei
- Kermanshah University of Technology; Department of Chemical Engineering; 67178 Kermanshah Iran
| | - Shiva Palani
- Kermanshah University of Technology; Department of Chemical Engineering; 67178 Kermanshah Iran
| |
Collapse
|
16
|
He Y, Xu L, Feng X, Zhao Y, Chen L. Dopamine-induced nonionic polymer coatings for significantly enhancing separation and antifouling properties of polymer membranes: Codeposition versus sequential deposition. J Memb Sci 2017. [DOI: 10.1016/j.memsci.2017.06.028] [Citation(s) in RCA: 46] [Impact Index Per Article: 6.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
17
|
Jo YJ, Choi EY, Choi NW, Kim CK. Antibacterial and Hydrophilic Characteristics of Poly(ether sulfone) Composite Membranes Containing Zinc Oxide Nanoparticles Grafted with Hydrophilic Polymers. Ind Eng Chem Res 2016. [DOI: 10.1021/acs.iecr.6b01510] [Citation(s) in RCA: 43] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Affiliation(s)
- Y. J. Jo
- School of Chemical Engineering & Materials Science, Chung-Ang University, 221, Huksuk-Dong, Dongjak-Gu, Seoul 156-756, Korea
| | - E. Y. Choi
- School of Chemical Engineering & Materials Science, Chung-Ang University, 221, Huksuk-Dong, Dongjak-Gu, Seoul 156-756, Korea
| | - N. W. Choi
- School of Chemical Engineering & Materials Science, Chung-Ang University, 221, Huksuk-Dong, Dongjak-Gu, Seoul 156-756, Korea
| | - C. K. Kim
- School of Chemical Engineering & Materials Science, Chung-Ang University, 221, Huksuk-Dong, Dongjak-Gu, Seoul 156-756, Korea
| |
Collapse
|