Synthesis and Characterization of Graft Copolymers Poly(isoprene-g-styrene) of High Molecular Weight by a Combination of Anionic Polymerization and Emulsion Polymerization

Hydrogen Bonding-Derived Healable Polyacrylate Elastomers via On-demand Copolymerization of n-Butyl Acrylate and tert-Butyl Acrylate

Achieving a desirable combination of good mechanical properties and healing efficiency is a great challenge in the development of self-healing elastomers. Herein, a class of tough and strong self-healing polyacrylate elastomers (denoted as HPs) was developed simply by free-radical copolymerization of n-butyl acrylate (nBA) and tert-butyl acrylate (tBA) and a subsequent hydrolysis reaction rather than direct copolymerization of nBA and acrylic acid (AA). The tiny difference in reactivity between nBA and tBA makes the structural units of the copolymer easy to control. Precise regulation of molecular composition can be realized just by varying the relative monomer content, making its mechanical properties to vary from ductile to robust. Strikingly, when HP samples are cut off within the gauge length, they can heal into coherent and smooth samples and recover at least 79% of the original strength. Hydrogen bond interactions serve as physical cross-linking points, contributing to the high mechanical performance (fracture energy of up to 73.78 MJ·m^-3 and tensile strength of up to 17.80 MPa) as well as shape memory function. Moreover, the HP samples emit strong fluorescence when exposed to a 365 nm UV lamp and exhibit an aggregation-enhanced emission effect in the state of dissolution.

Reversible Functionalization of Clickable Polyacrylamide Gels with Protein and Graft Copolymers

Modular strategies to fabricate gels with tailorable chemical functionalities are relevant to applications spanning from biomedicine to analytical chemistry. Here, the properties of clickable poly(acrylamide-co-propargyl acrylate) (pAPA) hydrogels are modified via sequential in-gel copper-catalyzed azide-alkyne cycloaddition (CuAAC) reactions. Under optimized conditions, each in-gel CuAAC reaction proceeds with rate constants of ~0.003 s-1, ensuring uniform modifications for gels < 200 μm thick. Using the modular functionalization approach and a cleavable disulfide linker, pAPA gels were modified with benzophenone and acrylate groups. Benzophenone groups allow gel functionalization with unmodified proteins using photoactivation. Acrylate groups enabled copolymer grafting onto the gels. To release the functionalized unit, pAPA gels were treated with disulfide reducing agents, which triggered ~50 % release of immobilized protein and grafted copolymers. The molecular mass of grafted copolymers (~6.2 kDa) was estimated by monitoring the release process, expanding the tools available to characterize copolymers grafted onto hydrogels. Investigation of the efficiency of in-gel CuAAC reactions revealed limitations of the sequential modification approach, as well as guidelines to convert a pAPA gel with a single functional group into a gel with three distinct functionalities. Taken together, we see this modular framework to engineer multifunctional hydrogels as benefiting applications of hydrogels in drug delivery, tissue engineering, and separation science.

Rheological and thermal degradation properties of hyperbranched polyisoprene prepared by anionic polymerization

Hyperbranched polyisoprene was prepared by anionic copolymerization under high vacuum condition. Size exclusion chromatography was used to characterize the molecular weight and branching nature of these polymers. The characterization by differential scanning calorimetry and melt rheology indicated lower Tg and complex viscosity in the branched polymers as compared with the linear polymer. Degradation kinetics of these polymers was explored using thermogravimetric analysis via non-isothermal techniques. The polymers were heated under nitrogen from ambient temperature to 600°C using heating rates from 2 to 15°C min-1. Three kinetics methods namely Friedman, Flynn-Wall-Ozawa and Kissinger-Akahira-Sunose were used to evaluate the dependence of activation energy (Ea ) on conversion (α). The hyperbranched polyisoprene decomposed via multistep mechanism as manifested by the nonlinear relationship between α and Ea while the linear polymer exhibited a decline in Ea at higher conversions. The average Ea values range from 258 to 330 kJ mol-1 for the linear, and from 260 to 320 kJ mol-1 for the branched polymers. The thermal degradation of the polymers studied involved one-dimensional diffusion mechanism as determined by Coats-Redfern method. This study may help in understanding the effect of branching on the rheological and decomposition kinetics of polyisoprene.

The Microscopic Structure-Property Relationship of Metal-Organic Polyhedron Nanocomposites

Monodispersed hairy nanocomposites with typical 2 nm (isophthalic acid)₂₄ Cu₂₄ metal-organic polyhedra (MOP) as a core protected by 24 polymer chains with controlled narrow molecular weight distribution has been probed by imaging and scattering studies for the heterogeneity of polymers in the nanocomposites and the confinement effect the MOPs imposing on anchored polymers. Typical confined-extending surrounded by one entanglement area is proposed to describe the physical states of the polymer chains. This model dictates the counterintuitive thermal and rheological properties and prohibited solvent exchange properties of the nanocomposites, whilst those polymer chain states are tunable and deterministic based on their component inputs. From the relationship between the structure and behavior of the MOP nanocomposites, a MOP-composited thermoplastic elastomer was obtained, providing practical solutions to improve mechanical/rheological performances and processabilities of inorganic MOPs.

Design, synthesis, and characterization of lightly sulfonated multigraft acrylate-based copolymer superelastomers

Multigraft copolymer superelastomers consisting of a poly(n-butyl acrylate) backbone and polystyrene side chains were synthesized and the viscoelastic properties of the non-sulfonated and sulfonated final materials were investigated using extensional rheology (SER3). The non-linear viscoelastic experiments revealed significantly increased true stresses (up to 10 times higher) after sulfonating only 2–3% of the copolymer while the materials maintained high elongation (<700%). The linear viscoelastic experiments showed that the storage and loss modulus are increased by sulfonation and that the copolymers can be readily tuned and further improved by increasing the number of branching points and the molecular weight of the backbone. In this way, we show that by tuning not only the molecular characteristics of the multigraft copolymers but also their architecture and chemical interaction, we can acquire thermoplastic superelastomer materials with desired viscoelastic properties.

Lightly sulfonated acrylate-based multigraft superelastomers with tunable true stress and elongation (>700%) at room temperature.

Facile fabrication of poly(glycidyl methacrylate)-b-polystyrene functional fibers under a shear field and immobilization of hemoglobin

PGMA-b-PS fibers were fabricated under a shear field for immobilization of bovine hemoglobin which has potential applications in blood substitutes.

Block Copolymers: Synthesis, Self-Assembly, and Applications

Research on block copolymers (BCPs) has played a critical role in the development of polymer chemistry, with numerous pivotal contributions that have advanced our ability to prepare, characterize, theoretically model, and technologically exploit this class of materials in a myriad of ways in the fields of chemistry, physics, material sciences, and biological and medical sciences. The breathtaking progress has been driven by the advancement in experimental techniques enabling the synthesis and characterization of a wide range of block copolymers with tailored composition, architectures, and properties. In this review, we briefly discussed the recent progress in BCP synthesis, followed by a discussion of the fundamentals of self-assembly of BCPs along with their applications.

Synthesis and characterization of brush-like multigraft copolymers PnBA-g-PMMA by a combination of emulsion AGET ATRP and emulsion polymerization

In this paper, poly(n-butyl acrylate)-g-poly(methyl methacrylate) multigraft copolymers were synthesized by macromonomer technique and miniemulsion copolymerization. The PMMA macromonomers were obtained by an activator generated by electron transfer atom transfer radical polymerization (AGET ATRP) in emulsion system and subsequent allylation. Then the copolymerization of different macromonomers with nBA was carried out in miniemulsion system, obtaining multigraft copolymers with high molecular weight. The latex particles and distribution of emulsion AGET ATRP and miniemulsion copolymerization were characterized using laser light scattering. The molecular weight and polydispersity indices of macromonomers and multigraft copolymers were analyzed by gel permeation chromatography, and the number-average molecular weight range is 187,600-554,800 g/mol for PnBA-g-PMMA copolymers. In addition, the structural characteristics of macromonomer and brush-like copolymers were determined by infrared spectra and (1)H nuclear magnetic resonance spectroscopy. The thermal performance of brush-like copolymers were characterized by differential scanning calorimetry and thermogravimetric analysis. Atomic force microscopy results showed that the degree of microphase separation was varying with increasing PMMA content in PnBA-g-PMMA. The dynamic rheometer analysis revealed that multigraft copolymer with PMMA content of 31.4% exhibited good elastomeric properties to function as a TPE. These multigraft copolymers show a promising low cost and environmental friendly thermoplastic elastomer.

Synthesis and characterization of graft copolymers PnBA-g-PS by miniemulsion polymerization

PnBA-g-PS by emulsion AGET ATRP and miniemulsion polymerization.