One-Step “Green” Synthesis of Pd Nanoparticles of Controlled Size and Their Catalytic Activity for Trichloroethene Hydrodechlorination

Controlled In-Cell Generation of Active Palladium(0) Species for Bioorthogonal Decaging

Owing to their bioorthogonality, transition metals have become very popular in the development of biocompatible bond-cleavage reactions. However, many approaches require design and synthesis of complex ligands or formulation of nanoparticles which often perform poorly in living cells. This work reports on a method for the generation of an active palladium species that triggers bond-cleaving reactions inside living cells. We utilized the water-soluble Na2PdCl4 as a simple source of Pd(II) which can be intracellularly reduced by sodium ascorbate to the active Pd(0) species. Once generated, Pd(0) triggers the cleavage of allyl ether and carbamate caging groups leading to the release of biologically active molecules. These findings do not only expand the toolbox of available bioorthogonal dissociative reactions but also provide an additional strategy for controlling the reactivity of Pd species involved in Pd-mediated bioorthogonal reactions.

Characterization, Antimicrobial and Anticancer Properties of Palladium Nanoparticles Biosynthesized Optimally Using Saudi Propolis

Due to their unique physicochemical characteristics, palladium nanoparticles (Pd-NPs) have shown tremendous promise in biological applications. The biosynthesis of Pd-NPs employing Saudi propolis has been designed to be environmental, fast, controlled, and cost-effective. The formation and stability of biosynthesized Pd-NPs by Saudi propolis extract were proved by ultraviolet-visible spectrophotometry (UV-Vis), Fourier-transform infrared spectroscopy (FT-IR), and Zeta potential analysis. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD) findings show that the average particle size of Pd-NPs is between 3.14 and 4.62 nm, which is in quantum scale. The Saudi propolis enhanced the antimicrobial activity against B. subtilis, S. aureus, E. coli, K. pneumoniae, and C. albicans. Pd-NPs show effective anticancer activity against ductal carcinoma (MCF-7) with IC50 of 104.79 µg/mL.

Enhanced removal of zinc and cadmium from water using carboxymethyl cellulose-bridged chlorapatite nanoparticles

Zinc (Zn²⁺) and cadmium (Cd²⁺) in water pose serious threats to human health and the environment. In search for a more effective treatment technology, we prepared a type of carboxymethyl cellulose (CMC) bridged chlorapatite (CMC-CAP) nanoparticles and tested the material for removal of Zn²⁺ and Cd²⁺ from water. CMC macromolecules were attached to CAP by bidentate bridging and hydrogen bonding, preserving the high adsorption capacity of CAP nanoparticles while allowing for easy gravity-separation of the nanoparticles. CMC-CAP showed rapid adsorption kinetics and 22.8% and 11.2% higher equilibrium uptake for Zn²⁺ and Cd²⁺, respectively, than pristine CAP. An extended dual-mode isotherm model, which takes into account both sorption and chemical precipitation, provided the best fits to the sorption isotherms, giving a maximum Langmuir sorption capacity of 141.1 mg g^-1 for Zn²⁺ and 150.2 mg g^-1 for Cd²⁺ by CMC-CAP. Na⁺ at up to 5 mM showed modest effects on the uptake of the heavy metals, while 2-5 mM of Ca²⁺ exerted notable inhibitive effects. Dissolved organic matter (up to 5 mg L^-1 as TOC) inhibited the Zn²⁺ uptake by 16.5% but enhanced the Cd²⁺ removal by 8.6%. Material characterizations and surface binding analyses revealed that ion exchange, surface precipitation, and surface complexation were the removal mechanisms for the heavy metals. This study demonstrates stabilizer bridging may serve as a convenient strategy to facilitate water treatment uses of nanoparticles.

Dechlorination of Excess Trichloroethene by Bimetallic and Sulfidated Nanoscale Zero-Valent Iron

Nanoscale zerovalent iron (nZVI) likely finds its application in source zone remediation. Two approaches to modify nZVI have been reported: bimetal (Fe-Me) and sulfidated nZVI (S-nZVI). However, previous research has primarily focused on enhancing particle reactivity with these two modifications under more plume-like conditions. In this study, we systematically compared the trichloroethene (TCE) dechlorination pathway, rate, and electron selectivity of Fe-Me (Me: Pd, Ni, Cu, and Ag), S-nZVI, and nZVI with excess TCE simulating source zone conditions. TCE dechlorination on Fe-Me was primarily via hydrogenolysis while that on S-nZVI and nZVI was mainly via β-elimination. The surface-area normalized TCE reduction rate ( k^'_SA) of Fe-Pd, S-nZVI, Fe-Ni, Fe-Cu, and Fe-Ag were ∼6800-, 190-, 130-, 20-, and 8-fold greater than nZVI. All bimetallic modification enhanced the competing hydrogen evolution reaction (HER) while sulfidation inhibited HER. Fe-Cu and Fe-Ag negligibly enhanced electron utilization efficiency (ε_e) while Fe-Pd, Fe-Ni, and S-nZVI dramatically increased ε_e from 2% to ∼100%, 69%, and 72%, respectively. Adsorbed atomic hydrogen was identified to be responsible for the TCE dechlorination on Fe-Me but not on S-nZVI. The enhanced dechlorination rate along with the reduced HER of S-nZVI can be explained by that FeS conducting major electrons mediated TCE dechlorination while Fe oxides conducting minor electrons mediated HER.

Virola oleifera-capped gold nanoparticles showing radical-scavenging activity and low cytotoxicity

The development of effective nanoparticle therapeutics has been hindered by their surface characteristics, such as hydrophobicity and charge. Therefore, the success of biomedical applications with nanoparticles is governed by the control of these characteristics. In this article, we report an efficient green capping method for gold nanoparticles (AuNPs) by a reduction with sodium citrate and capping with Virola oleifera (Vo), which is a green exudate rich in polyphenols and flavonoids. The Vo-capped AuNPs were characterized by UV, DLS, FTIR, Raman, TEM, DPPH, FRAP and their cytotoxicity was evaluated on the viability of Murine macrophage cell. The AuNPs had an average particle size of 15 nm and were stable over a long time, as indicated by their unchanged SPR and zeta potential values. These nanoparticles were assessed for their antioxidant potential using DPPH and FRAP and demonstrated the highest antioxidant activities and low cytotoxicity. We propose that the Virola oleifera-capped AuNPs have potential biomedical applications.

High-Precision Photothermal Ablation Using Biocompatible Palladium Nanoparticles and Laser Scanning Microscopy

Herein, we report a straightforward method for the scalable preparation of Pd nanoparticles (Pd-NPs) with reduced inherent cytotoxicity and high photothermal conversion capacity. These Pd-NPs are rapidly taken up by cells and able to kill labeled cancer cells upon short exposure to near-infrared (NIR) light. Following cell treatment with Pd-NPs, ablated areas were patterned with high precision by laser scanning microscopy, allowing one to perform cell migration assays with unprecedented accuracy. Using coherent Raman microscopy, cells containing Pd-NPs were simultaneously ablated and imaged. This novel methodology was combined with intravital imaging to mediate microablation of cancerous tissue in tumor xenografts in mice.

Green carboxymethyl cellulose-silver complex versus cellulose origins in biological activity applications

This article deals with evaluating the role of cellulose origin, from wood and non-wood, on preparing green CMC-Ag complex as biological active agent. Viscose pulp as well as bagasse and rice straw pulps were used in preparation of CMCs, followed by complexation with AgNO_3. The complex structure (free-Ag, IR-spectra and TGA), morphology (TEM), antibiological and anti-tumor activities were studied. The data revealed that, the main interaction between CMC and silver is occurred via carboxylate groups and ether link of 1ry alcohol, with formation stable 5-membered ring structure. For the case of RS-based CMC-Ag complex the interaction between COO groups and silica included RS is also possible, via hydrogen bonds. These complexes have anti-biological especially towards gram positive bacteria (B.subtilis, NCID-3610), and uni- and multi cellular fungi. AgNPs from viscose (VCMC-Ag complex) has relatively higher anti-tumor activity for breast cancer MCF-7 in vitro than bagasse-based CMC-Ag complex (BCMC-Ag complex) with IC₅₀ 128μg/ml (as Ag). It is interesting to note that; viscose-based CMC-Ag complex (VCMC-Ag) has higher efficient behaviour as bioactive agent than literature reported agents, e.g., Pyridine derivative (∼300μg/ml).

Novel nano-semiconductor film layer supported nano-Pd Complex Nanostructured Catalyst Pd/Ⓕ-MeOx/AC for High Efficient Selective Hydrogenation of Phenol to Cyclohexanone

Supported metal as a type of heterogeneous catalysts are the most widely used in industrial processes. High dispersion of the metal particles of supported catalyst is a key factor in determining the performance of such catalysts. Here we report a novel catalyst Pd/Ⓕ-MeOx/AC with complex nanostructured, Pd nanoparticles supported on the platelike nano-semiconductor film/activated carbon, prepared by the photocatalytic reduction method, which exhibited high efficient catalytic performance for selective hydrogenation of phenol to cyclohexanone. Conversion of phenol achieved up to more than 99% with a lower mole ratio (0.5%) of active components Pd and phenol within 2 h at 70 °C. The synergistic effect of metal nanoparticles and nano-semiconductors support layer and the greatly increasing of contact interface of nano-metal-semiconductors may be responsible for the high efficiency. This work provides a clear demonstration that complex nanostructured catalysts with nano-metal and nano-semiconductor film layer supported on high specific surface AC can yield enhanced catalytic activity and can afford promising approach for developing new supported catalyst.

Enhanced removal of As (V) from aqueous solution using modified hydrous ferric oxide nanoparticles

Hydrous ferric oxide (HFO) is most effective with high treatment capacity on arsenate [As(V)] sorption although its transformation and aggregation nature need further improvement. Here, HFO nanoparticles with carboxymethyl cellulose (CMC) or starch as modifier was synthesized for the purpose of stability improvement and As(V) removal from water. Comparatively, CMC might be the optimum stabilizer for HFO nanoparticles because of more effective physical and chemical stability. The large-pore structure, high surface specific area, and the non-aggregated nature of CMC-HFO lead to increased adsorption sites, and thus high adsorption capacities of As(V) without pre-treatment (355 mg·g-1), which is much greater than those reported in previous studies. Second-order equation and dual-mode isotherm model could be successfully used to interpret the sorption kinetics and isotherms of As(V), respectively. FTIR, XPS and XRD analyses suggested that precipitation and surface complexation were primary mechanisms for As(V) removal by CMC modified HFO nanoparticles. A surface complexation model (SCM) was used to simulate As adsorption over pH 2.5-10.4. The predominant adsorbed arsenate species were modeled as bidentate binuclear surface complexes at low pH and as monodentate complexes at high pH. The immobilized arsenic remained stable when aging for 270 d at room temperature.

An overview of preparation and applications of stabilized zero-valent iron nanoparticles for soil and groundwater remediation

Nano-scale zero-valent iron (nZVI) is one of the most intensively studied materials for environmental cleanup uses over the past 20 years or so. Freshly prepared nZVI is highly reactive due to its high specific surface area and strong reducing power. Over years, the classic borohydride reduction method for preparing nZVI has been modified by use of various stabilizers or surface modifiers to acquire more stable and soil deliverable nZVI for treatment of different organic and inorganic contaminants in water and soil. While most studies have been focused on testing nZVI for water treatment, the greater potential or advantage of nZVI appears to be for in situ remediation of contaminated soil and groundwater by directly delivering stabilized nZVI into the contaminated subsurface as it was proposed from the beginning. Compared to conventional remediation practices, the in situ remediation technique using stabilized nZVI offers some unique advantages. This work provides an update on the latest development of stabilized nZVI for various environmental cleanup uses, and overviews the evolution and environmental applications of stabilized nZVI. Commonly used stabilizers are compared and the stabilizing mechanisms are discussed. The effectiveness and constraints of the nZVI-based in situ remediation technology are summarized. This review also reveals some critical knowledge gaps and research needs, such as interactions between delivered nZVI and the local biogeochemical conditions.

A review on plants extract mediated synthesis of silver nanoparticles for antimicrobial applications: A green expertise

Metallic nanoparticles are being utilized in every phase of science along with engineering including medical fields and are still charming the scientists to explore new dimensions for their respective worth which is generally attributed to their corresponding small sizes. The up-and-coming researches have proven their antimicrobial significance. Among several noble metal nanoparticles, silver nanoparticles have attained a special focus. Conventionally silver nanoparticles are synthesized by chemical method using chemicals as reducing agents which later on become accountable for various biological risks due to their general toxicity; engendering the serious concern to develop environment friendly processes. Thus, to solve the objective; biological approaches are coming up to fill the void; for instance green syntheses using biological molecules derived from plant sources in the form of extracts exhibiting superiority over chemical and/or biological methods. These plant based biological molecules undergo highly controlled assembly for making them suitable for the metal nanoparticle syntheses. The present review explores the huge plant diversity to be utilized towards rapid and single step protocol preparatory method with green principles over the conventional ones and describes the antimicrobial activities of silver nanoparticles.

Palladium nanoparticles synthesized by reducing species generated during a successive acidic/alkaline treatment of sucrose

Uniform spherical palladium nanoparticles with an average particle size of 4.3±0.5 nm were successfully synthesized by reducing H2PdCl4 with intermediates in situ generated during a successive acidic/alkaline treatment of sucrose. A successive acidic/alkaline treatment plays an important role on converting the non-reducing sucrose into efficient reducing species containing aldehyde functionality. The Benedict's test corroborates the development and vanishing of the in situ generated reducing species upon prolonged degradation. An increase in alkalinity drastically improves the reduction efficiency. ATR FT-IR spectroscopy indicated spontaneous development of carboxylate after the alkaline treatment. Under the employed condition, small organic species with carbonyl groups (aldehyde, acid, and acid salt) were generated through the sucrose degradation before being oxidized to carbonate after an hour of the treatment. Sucrose was completely decomposed into carbonate after a 24-h successive acidic/alkaline treatment. The synthesized palladium nanoparticles express a good catalytic activity in the decolorization process of Congo red by sodium borohydride.

Catalytic hydrodechlorination of trichloroethylene in water with supported CMC-stabilized palladium nanoparticles

In this work, we developed and tested a new class of supported Pd catalysts by immobilizing CMC (carboxymethyl cellulose) stabilized Pd nanoparticles onto alumina support. The alumina supported Pd nanoparticles were able to facilitate rapid and complete hydrodechlorination of TCE (trichloroethylene) without intermediate by-products detected. With a Pd mass loading of 0.33 wt% of the alumina mass, the observed pseudo first order reaction rate constant, k(obs), for the catalyst was increased from 28 to 109 L/min/g when CMC concentration was raised from 0.005 to 0.15 wt%. The activity increase was in accord with an increase of the Pd dispersion (measured via CO chemisorption) from 30.4% to 45.1%. Compared to the commercial alumina supported Pd, which has a lower Pd dispersion of 21%, our CMC-stabilized Pd nanoparticles offered more than 7 times greater activity. Pre-calcination treatment of the supported catalyst resulted in minor drop in activity, yet greatly reduced bleeding (<6%) of the Pd nanoparticles from the support during multiple cycles of applications. The presence of DOM (dissolved organic matter) at up to 10 mg/L as TOC had negligible effect on the catalytic activity. The alumina supported CMC-stabilized Pd nanoparticles may serve as a class of more effective catalysts for water treatment uses.

Electrocatalytic activity of Pd-loaded Ti/TiO2 nanotubes cathode for TCE reduction in groundwater

A novel cathode, Pd loaded Ti/TiO2 nanotubes (Pd-Ti/TiO2NTs), is synthesized for the electrocatalytic reduction of trichloroethylene (TCE) in groundwater. Pd nanoparticles are successfully loaded on TiO2 nanotubes which grow on Ti plate via anodization. Using Pd-Ti/TiO2NTs as the cathode in an undivided electrolytic cell, TCE is efficiently and quantitatively transformed to ethane. Under conditions of 100 mA and pH 7, the removal efficiency of TCE (21 mg/L) is up to 91% within 120 min, following pseudo-first-order kinetics with the rate constant of 0.019 min(-1). Reduction rates increase from 0.007 to 0.019 min(-1) with increasing the current from 20 to 100 mA, slightly decrease in the presence of 10 mM chloride or bicarbonate, and decline with increasing the concentrations of sulfite or sulfide. O2 generated at the anode slightly influences TCE reduction. At low currents, TCE is mainly reduced by direct electron transfer on the Pd-Ti/TiO2NT cathode. However, the contribution of Pd-catalytic hydrodechlorination, an indirect reduction mechanism, becomes significant with increasing the current. Compared with other common cathodes, i.e., Ti-based mixed metal oxides, graphite and Pd/Ti, Pd-Ti/TiO2NTs cathode shows superior performance for TCE reduction.

Synthesis of monodispersed palladium nanoparticles using tannic acid and its optical non-linearity

Palladium nanoparticles with average size 11.3 nm have been synthesized via a one-step reduction and capping method. This colloidal route using tannic acid does not require any other surfactant or capping agent to direct the growth of palladium nanoparticles. The effect of temperature on the conversion of Pd(2+) ion to Pd(0) is investigated. The growth process of nanoparticles is monitored using UV-visible spectra. The morphology and phase transformation have been confirmed by transmission electron microscopy and X-ray diffraction. An attempt to reveal the capping mechanism of tannic acid is done through FTIR analysis. The optical non-linearity of the samples was studied using open aperture Z-scan technique. The significance of this protocol for the generation of environmentally benign palladium nanoparticles lies mainly in its simplicity and cost effectiveness.

Field-scale transport and transformation of carboxymethylcellulose-stabilized nano zero-valent iron

The fate of nano zerovalent iron (nZVI) during subsurface injection was examined using carboxymethylcellulose (CMC) stabilized nZVI in a very large three-dimensional physical model aquifer with detailed monitoring using multiple, complementary detection methods. A fluorescein tracer test in the aquifer plus laboratory column data suggested that the very-aggressive flow conditions necessary to achieve 2.5 m of nZVI transport could be obtained using a hydraulically constrained flow path between injection and extraction wells. However, total unoxidized nZVI was transported only about 1 m and <2% of the injected nZVI concentration reached that distance. The experimental data also indicated that groundwater flow changed during injection, likely due to hydrogen bubble formation, which diverted the nZVI away from the targeted flow path. The leading edge of the iron plume became fully oxidized during transport. However, within the plume, oxidation of nZVI decreased in a fashion consistent with progressive depletion of aquifer "reductant demand". To directly quantify the extent of nZVI transport, a spectrophotometric method was developed, and the results indicated that deployment of unoxidized nZVI for groundwater remediation will likely be difficult.

Synthesis of size-controlled monodisperse Pd nanoparticles via a non-aqueous seed-mediated growth

We demonstrated that stepwise seed-mediated growth could be extended in non-aqueous solution (solvothermal synthesis) and improved as an effective method for controlling the uniform size of palladium nanoparticles (Pd NPs) in a wide range. The monodisperse Pd NPs with the size of about 5 nm were synthesized by simply reducing Pd(acac)2 with formaldehyde in different organic amine solvents. By an improved stepwise seed-mediated synthesis, the size of the monodisperse Pd NPs can be precisely controlled from approximately 5 to 10 nm. The as-prepared Pd NPs could self assemble to well-shaped superlattice crystal without size selection process.

Electrogeneration of H(2) for Pd-catalytic hydrodechlorination of 2,4-dichlorophenol in groundwater

A novel electrolytic groundwater remediation process, which used the H(2) continuously generated at cathode to achieve in situ catalytic hydrodechlorination, was developed for the treatment of 2,4-dichlorophenol (2,4-DCP) in groundwater. Catalytic hydrodechlorination using Pd supported on bamboo charcoal and external H(2) showed that 2,4-DCP was completely dechlorinated to phenol within 30 min at pH ≤ 5.5. In a divided electrolytic system, the catalytic hydrodechlorination of 2,4-DCP in cathodic compartment by H(2) generated at the cathode under 20 and 50 mA reached 100% at 120 and 60 min, respectively. Two column experiments with influent pHs of 5.5 (unconditioned) and 2 were conducted to evaluate the feasibility of this process. The 2,4-DCP removal efficiencies were about 63% and nearly 100% at influent pHs of 5.5 and 2, respectively. Phenol was solely produced by 2,4-DCP hydrodechlorination, and was subsequently degraded at the anode. A low pH could enhance the hydrodechlorination, but was not necessarily required. This study provides the preliminary results of a novel effective electrolytic process for the remediation of groundwater contaminated by chlorinated aromatics.

Rapid green synthesis of palladium nanoparticles using the dried leaf of Anacardium occidentale

A rapid, one pot and biogenic fabrication of Pd nanoparticles is reported. Pd nanoparticles of size below 5 nm size are synthesized using the dried leaf powder of Anacardium occidentale. Rapid reduction results in the formation of spherical particles. The nanoparticles are characterized by XRD, TEM, UV-visible and FTIR analysis. The absorption spectra have continua which are characteristic of Pd nanoparticles. The broad nature of the XRD pattern arising due to reflections from the (111), (200), (220), (311) and (222) planes indicate crystallinity of the nanoparticles with face centered cubic (fcc) structure. The morphology and shape of the nanoparticles are obtained by analyzing TEM images. Most of the nanoparticles are spherical with size in the range 2.5 and 4.5 nm. FTIR spectra of dried Pd nanoparticles, native and treated dried leaf powder have been analyzed to find out the biomolecule responsible for the reduction of Pd(2+) and capping of the palladium nanoparticles. The possible mechanism of formation of the nanoparticles is suggested.

Nanostructured membranes for enzyme catalysis and green synthesis of nanoparticles

Macroporous membranes functionalized with ionizable macromolecules provide promising applications in high capacity toxic metal capture, nanoparticle syntheses, and catalysis. Our low-pressure membrane approach has good reaction and separation selectivities, which are tunable by varying pH, ionic strength, or pressure. The sustainable green chemistry approach under ambient conditions and the evaluation of a reactive poly(acrylic acid) (PAA)-modified polyvinylidene fluoride (PVDF) membrane is described. Two distinct membrane types were obtained through different methods: 1) a stacked membrane through layer-by-layer assembly for the incorporation of enzymes (catalase and glucose oxidase), providing tunable product yields and 2) Fe/Pd nanoparticles for degradation of pollutants, obtained through an in situ green synthesis. Bioreactor-nanodomain interactions and mixed matrix nanocomposite membranes provide remarkable versatility compared to conventional membranes.

Green Synthesis of Fe and Fe/Pd Bimetallic Nanoparticles in Membranes for Reductive Degradation of Chlorinated Organics

Membranes containing reactive nanoparticles (Fe and Fe/Pd) immobilized in a polymer film (polyacrylic acid, PAA-coated polyvinylidene fluoride, PVDF membrane) are prepared by a new method. In the present work a biodegradable, non-toxic -"green" reducing agent, green tea extract was used for nanoparticle (NP) synthesis, instead of the well-known sodium borohydride. Green tea extract contains a number of polyphenols that can act as both chelating/reducing and capping agents for the nanoparticles. Therefore, the particles are protected from oxidation and aggregation, which increases their stability and longevity. The membrane supported NPs were successfully used for the degradation of a common and highly important pollutant, trichloroethylene (TCE). The rate of TCE degradation was found to increase linearly with the amount of Fe immobilized on the membrane, the surface normalized rate constant (k(SA)) being 0.005 L/m(2)h. The addition of a second catalytic metal, Pd, to form bimetallic Fe/Pd increased the k(SA) value to 0.008 L/m(2)h. For comparison purposes, Fe and Fe/Pd nanoparticles were synthesized in membranes using sodium borohydride as a reducing agent. Although the initial k(SA) values for this case (for Fe) are one order of magnitude higher than the tea extract synthesized NPs, the rapid oxidation reduced their reactivity to less than 20 % within 4 cycles. For the green tea extract NPs, the initial reactivity in the membrane domain was preserved even after 3 months of repeated use. The reactivity of TCE was verified with "real" water system.