Aggregation behavior of sodium cholate in aqueous solution

A Novel In Vitro Membrane Permeability Methodology Using Three-dimensional Caco-2 Tubules in a Microphysiological System Which Better Mimics In Vivo Physiological Conditions

The aim of this study was to develop an in vitro drug permeability methodology which mimics the gastrointestinal environment more accurately than conventional 2D methodologies through a three-dimensional (3D) Caco-2 tubules using a microphysiological system. Such a system offers significant advantages, including accelerated cellular polarization and more accurate mimicry of the in vivo environment. This methodology was confirmed by measuring the permeability of propranolol as a model compound, and subsequently applied to those of solifenacin and bile acids for a comprehensive understanding of permeability for the drug product in the human gastrointestinal tract. To protect the Caco-2 tubules from bile acid toxicity, a mucus layer was applied on the surface of Caco-2 tubules and it enables to use simulated intestinal fluid. The assessment using propranolol reproduced results equivalent to those obtained from conventional methodology, while that using solifenacin indicated fluctuations in the permeability of solifenacin due to various factors, including interaction with bile acids. We therefore suggest that this model will serve as an alternative testing system for measuring drug absorption in an environment closely resembling that of the human gastrointestinal tract.

Transbuccal Delivery of Isoniazid: Ex Vivo Permeability and Drug-Surfactant Interaction Studies

The oral administration of isoniazid (INH) may lead to discontinuation of tuberculosis treatment due to drug-related hepatotoxicity events, and thus, the transbuccal delivery of this drug was investigated, for the first time, as an alternative administration route. Ex vivo permeability assays were performed in Franz-type diffusion chambers, applying INH alone and in combination with sodium dodecyl sulfate (SDS) and sodium taurocholate (ST). After confirming the formation of micelle structures by dynamic light scattering analysis, UV-visible spectroscopy and zeta potential analyses were used to investigate drug-micelle interactions. In zeta potential analyses, no electrostatical interactions were identified for both surfactants in saliva buffer pH 6.8. Spectrophotometric analyses, in turn, indicated chemical interactions between INH and SDS in both pH values (2.0 and 6.8) whereas no interaction between the drug and ST was observed. Despite the interaction between SDS and drug, this surfactant increased the buccal transport rate of INH by approximately 11 times when compared with the control. In contrast, ST did not increase the drug permeability. The INH retention in SDS-treated mucosa was significantly higher when compared with the control and an effect on intercellular lipids was suggested. In vivo studies are needed to confirm the high INH absorption found here. Grapical abstract.

The mechanism of solifenacin release from a pH-responsive ion-complex oral suspension in the fasted upper gastrointestinal lumen

The main objective of this study was to investigate the mechanism of solifenacin release from a pH-responsive ion-complex oral resinate suspension under conditions simulating the environment in the upper gastrointestinal lumen. A secondary objective was to propose an appropriate in vitro methodology for evaluating the quality of orally administered solifenacin suspensions. The mechanism of solifenacin release from polacrilin potassium resin (Amberlite® IRP88) was investigated using biorelevant media and compendial setups (USP Apparatus 2 and USP Apparatus 4) and using newer, recently validated in vitro methodologies [biorelevant gastrointestinal transfer (BioGIT) system]. We evaluated the impact of particle size and concentration of the resin; thickener concentration (carbomer homopolymer, type B); and the impact of pH, cationic strength, agitation intensity and level of simulation of contents in the upper gastrointestinal lumen. Data suggested that solifenacin release from the resinate was determined by the resin particle size, the medium pH, cationic strength (when the conditions in the upper small intestine are simulated) and the level of simulation of contents in the upper small intestine. The interaction of solifenacin with taurocholic acid/lecithin aggregates was significant, but unlikely to affect the degree of solifenacin absorption, as a BCS Class I compound. Under acidic conditions, solifenacin was dissociated and released from the pH-responsive resin rapidly. Under conditions simulating the contents of the upper small intestine, solifenacin was replaced by cations from the testing media and diffused through the resin matrix. All three in vitro systems with or without a pH gradient are useful in distinguishing solifenacin release characteristics from resinate suspensions with different particle sizes. Because of this drug release mechanism, USP Apparatus 2 with fixed pH media demonstrated equivalent or slightly higher discriminative sensitivity than the other setups and appears to be appropriate for product quality control.

Removal of Dodecyl Sulfate Ions Bound to Human and Bovine Serum Albumins Using Sodium Cholate

The secondary structures of human serum albumin (HSA) and bovine serum albumin (BSA) were disrupted in the solution of sodium dodecyl sulfate (SDS), while being hardly damaged in the solution of the bile salt, sodium cholate (NaCho). In the present work, the removal of dodecyl sulfate (DS) ions bound to these proteins was attempted by adding various amounts of NaCho. The extent of removal was estimated by the restoration of α-helical structure of each protein disrupted by SDS. Increases and decreases in α-helical structure were examined using the mean residue ellipticity at 222 nm, [θ]₂₂₂, which was frequently used as a measure of α-helical structure content. The magnitudes of [θ]₂₂₂ of HSA and BSA, weakened by SDS, were restrengthened upon the addition of NaCho. This indicated that the α-helical structures of HSA and BSA that were disrupted by the binding of DS ions were nearly reformed by the addition of NaCho. The NaCho concentration at which the maximum restoration of [θ]₂₂₂ of each protein was attained increased nearly linearly with SDS concentration. These results indicated that most of the bound DS ions were removed from the proteins but the removal was incomplete. The removal of DS ions, examined by means of the equilibrium dialysis, was also incomplete. The α-helical structure restoration and the DS ion removal by NaCho were considered to be due to the ability of cholate anions to strip the surfactant ions bound to HSA and BSA. These stripped DS ions appeared to be more likely to form SDS-NaCho mixed micelles in bulk rather than SDS-NaCho mixed aggregates on the proteins.

Synthesis, Properties, and Aggregation Behavior of Tetrasiloxane-Based Anionic Surfactants

Three silicone surfactants, 3-tris(trimethylsiloxy)silylpropyl sulfonate with different alkaline counterions (lithium, sodium, and potassium), were synthesized for the first time. Their chemical structures were confirmed by FT-IR spectra, ¹H NMR, and ESI-MS, and their behaviors in aqueous solutions were investigated by surface tensiometry, electrical conductivity, dynamic light scattering, and different transmission electron microscopy techniques. These anionic silicone surfactants exhibited remarkable surface activity and could reduce the surface tension of water to as low as 19.8 mN/m at the critical aggregate concentration (CAC). The adsorption and aggregation behaviors of these surfactants were assessed by determining the adsorption efficiency, minimum average area per surfactant molecule, and thermodynamic parameters. The cryo-TEM results verified that these molecules could form vesicles in water above the CAC. Moreover, the lowest surface tension, the smallest CAC value, and the largest aggregate size have been reached with potassium counterions. Thus, the different behavior of these surfactants in water can be explained by the different sizes of the hydrated ions.

Solubilization and Interaction Studies of Bile Salts with Surfactants and Drugs: a Review

In this review, bile salt, bile salt-surfactant, and bile salt-drug interactions and their solubilization studies are mainly focused. Usefulness of bile salts in digestion, absorption, and excretion of various compounds and their rare properties in ordering the shape and size of the micelles owing to the presence of hydrophobic and hydrophilic faces are taken into consideration while compiling this review. Bile salts as potential bio-surfactants to solubilize drugs of interest are also highlighted. This review will give an insight into the selection of drugs in different applications as their properties get modified by interaction with bile salts, thus influencing their solution behavior which, in turn, modifies the phase-forming behavior, microemulsion, and clouding phenomenon, besides solubilization. Finally, their future perspectives are taken into consideration to assess their possible uses as bio-surfactants without side effects to human beings.

Production of decellularized porcine lung scaffolds for use in tissue engineering

There is a growing body of work dedicated to producing acellular lung scaffolds for use in regenerative medicine by decellularizing donor lungs of various species. These scaffolds typically undergo substantial matrix damage due to the harsh conditions required to remove cellular material (e.g., high pH, strong detergents), lengthy processing times, or pre-existing tissue contamination from microbial colonization. In this work, a new decellularization technique is described that maintains the global tissue architecture, key matrix components, mechanical composition and cell-seeding potential of lung tissue while effectively removing resident cellular material. Acellular lung scaffolds were produced from native porcine lungs using a combination of Triton X-100 and sodium deoxycholate (SDC) at low concentrations in 24 hours. We assessed the effect of matrix decellularization by measuring residual DNA, biochemical composition, mechanical characteristics, tissue architecture, and recellularization capacity.

Aggregation behavior of ibuprofen, cholic acid and dodecylphosphocholine micelles

Non-steroidal anti-inflammatory drugs (NSAIDs) are frequently used to treat chronic pain and inflammation. However, prolonged use of NSAIDs has been known to result in Gastrointestinal (GI) ulceration/bleeding, with a bile-mediated mechanism underlying their toxicity to the lower gut. Bile acids (BAs) and phosphatidylcholines (PCs), the major components of bile, form mixed micelles to reduce the membrane disruptive actions of monomeric BAs and simple BA micelles. NSAIDs are suspected to alter the BA/PC balance in the bile, but the molecular interactions of NSAID-BA or NSAID-BA-PC remain undetermined. In this work, we used a series of all-atom molecular dynamics simulations of cholic acid (CA), ibuprofen (IBU) and dodecylphosphocholine (DPC) mixtures to study the spontaneous aggregation of CA and IBU as well as their adsorption on a DPC micelle. We found that the size of CA-IBU mixed micelles varies with their molar ratio in a non-linear manner, and that micelles of different sizes adopt similar shapes but differ in composition and internal interactions. These observations are supported by NMR chemical shift changes, NMR ROESY crosspeaks between IBU and CA, and dynamic light scattering experiments. Smaller CA-IBU aggregates were formed in the presence of a DPC micelle due to the segregation of CA and IBU away from each other by the DPC micelle. While the larger CA-IBU aggregates arising from higher IBU concentrations might be responsible for NSAID-induced intestinal toxicity, the absence of larger CA-IBU aggregates in the presence of DPC micelles may explain the observed attenuation of NSAID toxicity by PCs.

The science of dispersing carbon nanotubes with surfactants

Self-assembled structures adsorbed on carbon nanotubes and other nanofibres offer a plethora of opportunities to endow them with new functions and to integrate them into devices and materials. At the same time they are key to solve the greatest problem in carbon nanotube utilisation--debundling and individualisation. Success will inevitably require an understanding of the underlying structure-function relationship of the adsorbed surfactant layer. Computer simulations are ideally suited to develop this understanding as they enable us to study the structure-function relationship in great detail. Combining the results from mesoscale and atomistic simulations we begin to develop this understanding and derive a number of recommendations for optimal dispersion design.

Supramolecular structures generated by a p-tert-butylphenylamide derivative of deoxycholic acid. From planar sheets to tubular structures through helical ribbons

The formation of supramolecular structures initiated by a p-tert-butylphenylamide derivative of deoxycholic acid (Na-t-butPhDC) is investigated. At 1.18 mM concentration of Na-t-butPhDC and 37 degrees C, initial flat ribbons are observed which self-transform into helical ribbons (with a mean pitch angle of 47 +/- 6 degrees) which finally originate molecular tubes with an external diameter of 241 +/- 28 nm. Most of the molecular tubes show helical markings with a pitch angle value of 45 +/- 4 degrees, in full agreement with predictions of simple models based on chiral elastic properties of the membrane. A lateral association mechanism is proposed to account for the growth of the external diameter (from 225 +/- 32 to 546 +/- 59 nm) of tubes with time at 3.99 mM.

Aggregation behavior of tetracarboxylic surfactants derived from cholic and deoxycholic acids and ethylenediaminetetraacetic acid

The reaction of 3beta-aminoderivatives of cholic and deoxycholic acids (steroid residues) with dimethyl ester of ethylenediaminetetraacetic acid (bridge) leads to the formation of dimers carrying four carboxylic organic functions, two of them located on the side chain of each steroid residue and the other two on the bridge. As tetrasodium salts, these new compounds behave as surfactants and have been characterized by surface tension, fluorescence intensity of pyrene (as a probe), and static and dynamic light scattering measurements. Thermodynamic parameters for micellization were obtained from the dependence of the critical micelle concentration (cmc) with temperature. For both surfactants, the fraction of bound counterions is close to 0.5. The aggregation behavior is similar to one of their bile salt residues [i.e., sodium cholate (NaC) and sodium deoxycholate (NaDC)] and can be summarized as follows: (i) molecular areas at the interface for the new surfactants are fairly close to twice the value for a single molecule in a monolayer of natural bile salts; (ii) the environment where pyrene is solubilized is very apolar, as in natural bile salt aggregates; (iii) Gibbs free energies (per steroid residue) for micellization are not far from published values for NaC and NaDC, and the differences can be understood on the basis of less hydrophobicity of the new surfactants due to the charges in the bridge; and (iv) as for NaC and NaDC, aggregates have rather low aggregation numbers (which depend on the amount of added inert salt, NaCl). A structure based on the disklike model accepted for small bile salt aggregates is proposed.

Bile acids: Chemistry, physiology, and pathophysiology

The family of bile acids includes a group of molecular species of acidic steroids with very peculiar physical-chemical and biological characteristics. They are synthesized by the liver from cholesterol through several complementary pathways that are controlled by mechanisms involving fine-tuning by the levels of certain bile acid species. Although their best-known role is their participation in the digestion and absorption of fat, they also play an important role in several other physiological processes. Thus, genetic abnormalities accounting for alterations in their synthesis, biotransformation and/or transport may result in severe alterations, even leading to lethal situations for which the sole therapeutic option may be liver transplantation. Moreover, the increased levels of bile acids reached during cholestatic liver diseases are known to induce oxidative stress and apoptosis, resulting in damage to the liver parenchyma and, eventually, extrahepatic tissues. When this occurs during pregnancy, the outcome of gestation may be challenged. In contrast, the physical-chemical and biological properties of these compounds have been used as the bases for the development of drugs and as pharmaceutical tools for the delivery of active agents.

Sodium cholate aggregation and chiral recognition of the probe molecule (R,S)-1,1'-binaphthyl-2,2'-diylhydrogenphosphate (BNDHP) observed by 1H and 31P NMR spectroscopy

Bile salt micelles can be employed as a pseudostationary phase in micellar electrokinetic capillary chromatography (MEKC) separations of chiral analytes. To improve MEKC separations of chiral analytes, a molecular level understanding of micelle aggregation in the presence of analyte is needed. Here, aggregation of sodium cholate has been observed by exploiting the presence of a model analyte molecule. The 31P and 1H nuclear magnetic resonance spectroscopy (NMR) chemical shifts of (R,S)-1,1'-binaphthyl-2,2'-diylhydrogenphosphate ((R,S)-BNDHP), a model analyte in chiral MEKC separations, are demonstrated to be very sensitive to the aggregation state of the bile salt sodium cholate. In addition to probing micellar aggregation, the NMR spectral resolution of enantiomeric species is also stronglycorrelated with chiral separations in MEKC. In this work, the aggregation of sodium cholate in basic solutions (pH 12) has been observed over the concentration range 0-100 mM. The primary critical micelle concentration (cmc) was found to be 14 +/- 1 mM for basic solutions of sodium cholate. In addition, a primitive aggregate is clearly observed to form at 7 +/- 1 mM sodium cholate. The data also show pseudo-cmc behavior for secondary aggregation observed in the regime of 50-60 mM cholate. Finally, the H5-H7 edge of BNDHP is shown to be sensitive to chirally selective interactions with primary cholate micelles.

Counterion binding in the aqueous solutions of bile acid salts, as studied by computer simulation methods

We investigate the structural and dynamical properties of counterion binding in sodium cholate and sodium deoxycholate micelles at three different concentration, namely, 30, 90, and 300 mM, by means of molecular dynamics simulations at the atomistic level. The obtained results can resolve a long-standing, apparent contradiction between different experiments that reported discordant values for the degree of counterion binding. Namely, our results suggest that certain experimental techniques, such as freezing point depression, are only sensitive to the contact counterions, and hence, the degree of contact binding of the counterions is measured. On the other hand, in experiments employing, e.g., electrode potential or nuclear magnetic resonance measurements, the solvent-separated counterions also contribute to the signal detected, and hence, the counterions that are measured as bound ones do include the solvent-separated counterions as well.

New lamellar structure formed by an adamantyl derivative of cholic acid

The self-aggregation of the sodium salt of a new adamantyl amide of the 3beta-amino derivative of cholic acid (Na-AdC) in aqueous solution has been investigated by surface tension, dynamic light scattering, fluorescence, small-angle X-ray scattering (SAXS), and transmission electron microscopy (TEM) measurements. These last two techniques suggest that a lamellar phase, consisting of charged bilayers of Na-AdC separated by solvent and periodically stacked, is formed in aqueous solution. The structure of the bilayer is inferred from the resolution of the crystal of the compound in its acid form. The adamantyl moieties, which are mutually interlocked, reside in the central region of the bilayer, and the carboxylic groups are directed toward the hydrophilic region. The structure is open enough to allow water molecules to interact with a fluorescence probe located at the central hydrophobic region.

Berberine Alkaloid as a Sensitive Fluorescent Probe for Bile Salt Aggregates

Effect of sodium cholate (NaC) bile salt on the absorption and fluorescence properties of berberine cation was studied in aqueous solution and water-cosolvent mixtures. The alteration of the fluorescent behavior with increasing NaC concentration showed an entirely different trend from that found previously in the presence of sodium dodecylsulfate. Binding to bile salt agglomerates led to significant fluorescence intensity enhancement, and the fluorescence lifetime of berberine proved to be highly sensitive to the structure and size of the aggregates. The dual exponential decay kinetics above 10 mM NaC concentration showed that the probe resided in two totally different binding sites. At 2-10 mM NaC concentrations, only primary aggregates were detected. The aggregate disrupting power of cosolvents decreased in the series of dimethylformamide, acetonitrile, formamide, and methanol. These compounds enhanced the water accessibility of berberine bound to aggregates and diminished the number of secondary aggregates.

Sodium dodecyl sulfate promoting a cooperative association process of sodium cholate with bovine serum albumin

Sodium cholate (NaC) was used as a representative bile salt in the process of cooperative binding to bovine serum albumin (BSA) in a mixture with sodium dodecyl sulfate (SDS). The experiments were performed in 0.02 M Tris-HCl buffer solution (pH 7.50), in the presence of 0.1% BSA and at 25 degrees C. The aim of this study is to provide information on the performance of the BSA in the promotion of cooperative binding of sodium cholate promoted by the presence of SDS. The method used to monitor the binding was based on the analysis of the effect of SDS and NaC concentrations and their mixtures upon the fluorescence intensity of the BSA tryptophan residues. Plots of the fluorescence emission bands in terms of the A0/A ratio vs surfactant concentrations, where A0 and A represent the areas of emission bands in the presence and absence of the surfactants, respectively, were drawn in order to investigate the surfactant interaction with the protein. An alternative methodology, the specific conductivity vs surfactant concentration plots, was used, which involves mixtures of SDS and NaC to investigate the association processes, through the determination of the critical aggregation concentration (cac, when in the presence of protein) and the critical micellar concentration (cmc). The results led to a general conclusion that as the mixed micellar aggregates become richer in the bile salt monomer, the tendency to lose the reactivity with the protein increases. According to our results, a clear evidence of the predomination of BSA-SDS-NaC complexes is found only for the SDS molar fraction above approximately 0.6, and below this fraction a tendency toward free mixed micelles starts to predominate.

Influence of Planarity and Size on Guest Binding with Sodium Cholate Aggregates

Bile salt aggregates are supramolecular structures with two types of binding sites, called primary and secondary sites. The objective of this work was to explore how the nonplanarity and size of guests (biphenyl [BP], 1-1'-binaphthyl [BNP] and dibenz[b,f]oxepin [DBX]) affected their binding affinity and dynamics to sodium cholate (NaC) aggregates. Fluorescence and laser-flash photolysis experiments were performed to obtain information on the binding environment for the guests, the accessibility of quenchers to guests in the aggregate and the dissociation rate constants of the guests from the aggregates. All guests were bound to the more hydrophobic primary aggregate, showing that this site can accommodate nonplanar molecules. However, the structure of the guest affects the structure of the primary aggregates, leading to changes in the accessibility of anions to aggregate-bound guests and to changes for the guest dissociation rate constants from the aggregates.

Micellization of conjugated chenodeoxy- and ursodeoxycholates and solubilization of cholesterol into their micelles: comparison with other four conjugated bile salts species

Micelle formations of sodium glyco- and taurochenodeoxycholate (NaGCDC and NaTCDC) and sodium glyco- and tauroursodeoxycholates (NaGUDC and NaTUDC) was studied at 308.2 K for their critical micelle concentrations at various NaCl concentrations by pyrene fluorescence probe, and the degree of counterion binding to micelle was determined using the Corrin-Harkins plots. The degree of counterion binding was found to be 0.37-0.38 for chenodeoxycholate conjugates, while the determination of the degree was quite difficult for ursodeoxycholate conjugates. The change of I1/I3 values on the fluorescence spectrum with the conjugate bile salt concentration suggested two steps for their bile salt aggregation. The first step is a commencement of smaller aggregates, the first cmc, and the second one is a starting of stable aggregates, the second cmc. The aggregation number was determined at 308.2 K and 0.15 M NaCl concentration by static light scattering: 16.3 and 11.9 for sodium NaGCDC and NaTCDC, and 7.9 and 7.1 for NaGUDC and NaTUDC, respectively. The solubilization of cholesterol into the bile salt micelles in the presence of coexisting cholesterol phase and the maximum additive concentration (MAC) of cholesterol was determined against the bile salt concentration. The standard Gibbs energy change for the solubilization was evaluated, where the micelles were regarded as a chemical species. The solubilization was stabilized in the order of NaGUDC approximately = NaTUDC < NaTC < NaGC < NaTCDC < NaGCDC < NaTDC < NaGDC, where the preceding results were taken into the order.

Probing the binding dynamics to sodium cholate aggregates using naphthalene derivatives as guests

The binding dynamics with bile salt aggregates for a series of naphthalene derivatives of different polarities was studied using fluorescence and laser flash photolysis. Fluorescence was employed to determine the nature of the binding site for each guest and the accessibility of the bound guest to quenchers. Laser flash photolysis was employed to study the mobility of the triplet states of the naphthalenes between the sodium cholate aggregates and the aqueous phase. Primary aggregates, which provide an environment protected from quenchers in the aqueous phase, bind 1- and 2-ethylnaphthalene as guests. The complexation dynamics with this type of aggregate is slow. 1- and 2-Naphthyl-1-ethanol, and 1- and 2-acetonaphthone bind to the secondary aggregates, which provide moderate protection from quenching and faster binding dynamics. The addition of salts lowered the cholate concentration at which primary aggregates were formed, but did not influence the formation of secondary aggregates.

Modulation with acetonitrile of the dynamics of guest binding to the two distinct binding sites of cholate aggregates

Bile salt aggregates are supramolecular systems containing two different binding sites. The effect of the addition of acetonitrile on the specificity and dynamics of guest binding to the two binding sites of cholate aggregates was studied. The protection of guests included in the aggregate from interaction with ions in the aqueous phase was evaluated from quenching of the singlet and triplet excited states of guest molecules bound to the cholate aggregates. The dynamics of guest binding to the primary and secondary binding sites of the cholate aggregates were determined at increasing acetonitrile mole fractions. The structure of the aggregates was not significantly altered provided the cholate concentrations were higher than 20 mM and the acetonitrile mole fraction did not exceed 0.033 (9.1% v/v). These results show that acetonitrile can be used to modulate the solubility of guests in the aggregates and to manipulate the residence time of guests in the primary and secondary binding sites.

Temperature effect on formation of sodium cholate micelles

The micellization of sodium cholate (NaC) at 293.2, 298.2, 303.2, 308.2, and 313.2 K by cholate anion concentration was studied over the pH range from 6.0 to 7.2. Using a stepwise association model of cholate anions without bound sodium counterions, the aggregation number (nmacr;) of the cholate micelles was evaluated and found to increase with the total concentration, indicating that the stepwise association model is applicable. The nmacr; values go up and down with increasing temperature; 17 at 298.2 and 12 at 313.2 K and at 60 mM of the sodium cholate. The fluorescence of pyrene was measured in sodium cholate solution to determine the critical micelle concentration (CMC), indicating a narrow concentration range for CMC. A sodium-ion-specific electrode was used to determine a relatively low degree of counterion binding to micelles, supporting the validity of the present association model of cholate anions. The aggregation numbers evaluated at a constant ionic strength of 0.15 and at lower but variable ionic strengths were similar except for higher cholate concentrations.

Micelle formation of sodium deoxycholate and sodium ursodeoxycholate (part 1)

Micellization of sodium deoxycholate (NaDC) and sodium ursodeoxycholate (NaUDC) was studied for the critical micelle concentration (CMC), the micelle aggregation number, and the degree of counterion binding to micelle, where sodium cholate (NaC) was used as a reference. The fluorescence probe technique of pyrene was employed to determine accurately the CMC values for the bile salts, which indicated that a certain concentration range of CMC and a stepwise aggregation for micellization were reasonable. The temperature dependences of micellization for NaDC and NaUDC were studied at 288.2, 298.2, 308.2, and 318.2 K by aqueous solubility change with solution pH. Aggregations of the bile salt anions were analyzed using the stepwise association model and found to grow in size with increasing concentration, which confirmed that the mass action model worked quite well. The average aggregation number was found to be 2.5 (NaUDC) and 10.5 (NaDC) at the concentration of 20 mM and at 308.2 K. The aggregation number determined by static light scattering also agreed well with those by the solubility method in the order of size: NaUDC<NaC<NaDC at 308.2 K. The results indicated that the location of the OH group at C-7 and its orientation were the most important factors from the viewpoint of chemical structure for the growth of micelles. The activity measurement for sodium ions was made by a sodium ion selective electrode in order to confirm the low counterion binding to micelles and the validity of the present association model of bile salts, but the model did not hold good for NaDC at higher concentrations.

Measurement of bilirubin partition coefficients in bile salt micelle/aqueous buffer solutions by micellar electrokinetic chromatography

The partition coefficients for the distribution of bilirubin between aqueous phosphateborate buffer and cholic, taurocholic, taurodeoxycholic, and taurochenodeoxycholic micelles have been measured by micellar electrokinetic chromatography at pH 8.5. Determination of the partition coefficients required that the critical micelle concentration and partial specific volumes be determined for each bile salt. Critical micelle concentrations were slightly higher for the trihydroxy bile salts. Partial specific volumes of the bile salt micelles differed very little from each other, and for each bile salt they were constant over the concentration range studied, which was typically from slightly above the critical micelle concentration to 35 mM. Capacity factors were corrected for the effects of applied voltage by extrapolation of the capacity factor to zero applied volts. The free solution mobility of bilirubin, determined in the absence of bile salt, was also corrected for the effects of applied voltage. Plots of extrapolated capacity factor versus phase ratio yield the partition coefficient as the slope of a linear fit to the data. Partition coefficients for bilirubin were significantly higher for dihydroxy bile salts than for trihydroxy bile salts.