Novel templating synthesis of necklace-shaped mono- and bimetallic nanowires in hybrid organic-inorganic mesoporous material

Structural Morphology and Optical Properties of Strontium-Doped Cobalt Aluminate Nanoparticles Synthesized by the Combustion Method

The study of structural morphology and the optical properties of nanoparticles produced by combustion methods are gaining significance due to their multifold applications. In this regard, in the present work, the strontium-doped cobalt aluminate nanoparticles were synthesized by utilizing Co_1-xSr_xAl₂O₄ (0 ≤ x ≤ 0.5) L-Alanine as a fuel in an ignition cycle. Subsequently, several characterization studies viz., X-ray diffraction (XRD), energy-dispersive X-ray (EDX) analysis, high-resolution scanning electron microscopy (HRSEM), Fourier transform infrared spectroscopy (FTIR), ultraviolet (UV) spectroscopy and vibrating sample magnetometry (VSM) were accomplished to study the properties of the materials. The XRD analysis confirmed the cubic spinel structure, and the average crystallite size was found to be in the range of 14 to 20 nm using the Debye-Scherrer equation. High-resolution scanning electron microscopy was utilized to inspect the morphology of the Co_1-xSr_xAl₂O₄ (0 ≤ x ≤ 0.5) nanoparticles. Further, EDS studies were accomplished to determine the chemical composition. Kubelka-Munk's approach was used to determine the band gap, and the values were found to be in the range of 3.18-3.32 eV. The energy spectra for the nanoparticles were in the range of 560-1100 cm^-1, which is due to the spinel structure of Sr-doped CoAl₂O₄ nanoparticles. The behavior plots of magnetic induction (M) against the magnetic (H) loops depict the ferromagnetic behavior of the nanomaterials synthesized.

A Critical Review on Nanowire-Motors: Design, Mechanism and Applications

Nanowire-motors (NW-Ms) are promoting the rapid development of emerging biomedicine and environmental governance, and are an important branch of micro-nano motors in the development of nanotechnology. In recent years, huge research breakthroughs have been made in these fields in terms of the fascinating microstructure, conversion efficiency and practical applications of NW-Ms. This review article introduces the latest milestones in NW-Ms research, from production methods, driving mechanisms, control methods to targeted drug delivery, sewage detection, sensors and cell capture. The dynamics and physics of micro-nano devices are reviewed, and finally the current challenges and future research directions in this field are discussed. This review further aims to provide certain guidance for the driving of NW-Ms to meet the urgent needs of emerging applications.

Synthesis, Characterization and Use of Mesoporous Silicas of the Following Types SBA-1, SBA-2, HMM-1 and HMM-2

Mesoporous silicas have enjoyed great interest among scientists practically from the moment of their discovery thanks to their unique attractive properties. Many types of mesoporous silicas have been described in literature, the most thoroughly MCM-41 and SBA-15 ones. The focus of this review are the methods of syntheses, characterization and use of mesoporous silicas from SBA (Santa Barbara Amorphous) and HMM (Hybrid Mesoporous Materials) groups. The first group is represented by (i) SBA-1 of three-dimensional cubic structure and Pm3n symmetry and (ii) SBA-2 of three-dimensional combined hexagonal and cubic structures and P63/mmc symmetry. The HMM group is represented by (i) HMM-1 of two-dimensional hexagonal structure and p6mm symmetry and (ii) HMM-2 of three-dimensional structure and P63/mmc symmetry. The paper provides comprehensive information on the above-mentioned silica materials available so far, also including the data for the silicas modified with metal ions or/and organic functional groups and examples of the materials applications.

Size-Controlled Synthesis of Anatase in a Mesoporous Silica, SBA-15

The preparation of anatase in the cylindrical mesopore of SBA-15 (pore size of 8 nm) was done by the impregnation of tetraisopropyl orthotitanate and its subsequent crystallization. The impregnation was done without a solvent. Hydrolysis and condensation were promoted by the HCl vapor to encapsulate a larger amount of titanium oxo species in the mesopore and to suppress the desorption of the titanium oxo species during crystallization to anatase. After the reaction, the shape of the N₂ adsorption isotherm changed significantly, indicating the decrease of the Brunauer-Emmett-Teller surface area from 743 to 283 m²/g and of the pore volume from 1.27 to 0.26 cm³/g, respectively. After the crystallization to anatase, the TiO₂ content in the product was estimated to be 62 mass %, filling 30% of the pore volume of SBA-15. The homogeneous distribution of titanium in the SBA-15 sample was confirmed by elemental mapping based on scanning electron microscopy/energy-dispersive X-ray spectrometry. The crystal size of the anatase was determined to be ca. 8.1 nm, which is consistent with the pore size of the used SBA-15 (8.0 nm, derived from the Barrett-Joyner-Halenda analysis of the nitrogen adsorption isotherm). The zeta potential measurements showed the absence of anatase as isolated particles or on the surface of SBA-15 particles. All of these characterizations confirmed the successful size-controlled synthesis of anatase in the mesopore of SBA-15.

Inorganic nanoparticles in porous coordination polymers

This review highlights studies on the synthesis, characterization, and functions of the inorganic nanoparticles in porous coordination polymers.

Recent advances in the synthesis of colloidal nanowires

We review critically the advances in the synthesis of colloidal nanowires that have occurred over the past three years, with a focus on those that produced very thin (or “ultrathin”) nanowires (∼2–3 nm in diameter or less). We discuss the importance of these ultrathin nanowires, especially in light of the emerging evidence of their topological properties and their potential similarities with polymers.

Ag-nanoparticle-loaded mesoporous silica: spontaneous formation of Ag nanoparticles and mesoporous silica SBA-15 by a one-pot strategy and their catalytic applications

A facile one-step method was proposed for the successful synthesis of Ag-nanoparticle-loaded mesoporous silica SBA-15 composites, where silver ions and their corresponding reductant aniline were added in the traditional synthetic system of mesoporous silica SBA-15 containing P123 as the surfactant and TEOS as the silica source. Mesoporous silica SBA-15 and Ag nanoparticles were spontaneously formed with Ag nanoparticles embedded in channels and even implanted in frameworks of mesoporous silica SBA-15. A tentative formation process was then proposed according to experimental observations. Furthermore, catalytic activities of Ag-nanoparticle-loaded silica SBA-15 composites toward the reduction of 4-nitrophenol in the presence of NaBH(4) and the reduction of H(2)O(2) were also investigated.

FABRICATION OF METAL NANOWIRE AND NANOPARTICLE IN MESOPOROUS SILICA TEMPLATES AND THEIR CATALYTIC PERFORMANCES

Mono- and bimetallic nanowires and particles were selectively synthesized in mesoporous silica templates, in which siliceous FSM-16 and organic–inorganic hybrid HMM-1 were used as templates. The metal nanowires and particles were characterized by several physicochemical methods. The mechanism for formation of Pt wires was studied, and migration of precursor Pt ions in the mesoporous channels is the key to the formation of the wires. The Pt wires can be isolated by dissolving silicate matrix in a good yield, and STM and HRTEM demonstrate that the wires extracted from HMM-1 has a nanonecklace structure, but the wire from FSM-16 shows a nanorod structure. The extracted Pt wires are stabilized by PPh 3. The nanowire composites show unique properties in magnetism and high catalytic performances in CO oxidation reaction.

Silver nanoparticles are broad-spectrum bactericidal and virucidal compounds

The advance in nanotechnology has enabled us to utilize particles in the size of the nanoscale. This has created new therapeutic horizons, and in the case of silver, the currently available data only reveals the surface of the potential benefits and the wide range of applications. Interactions between viral biomolecules and silver nanoparticles suggest that the use of nanosystems may contribute importantly for the enhancement of current prevention of infection and antiviral therapies. Recently, it has been suggested that silver nanoparticles (AgNPs) bind with external membrane of lipid enveloped virus to prevent the infection. Nevertheless, the interaction of AgNPs with viruses is a largely unexplored field. AgNPs has been studied particularly on HIV where it was demonstrated the mechanism of antiviral action of the nanoparticles as well as the inhibition the transmission of HIV-1 infection in human cervix organ culture. This review discusses recent advances in the understanding of the biocidal mechanisms of action of silver Nanoparticles.

Creation of coating surfaces possessing superhydrophobic and superoleophobic characteristics with fluoroalkyl end-capped vinyltrimethoxysilane oligomeric nanocomposites having biphenylene segments

Fluoroalkyl end-capped vinyltrimethoxysilane oligomeric nanocomposites having biphenylene units [R(F)-(VM-SiO(2))(n)-R(F)/Ar-SiO(2)] were prepared by the sol-gel reaction of the corresponding oligomer [R(F)-(VM)(n)-R(F)] with 4,4'-bis(triethoxysilyl)-1,1'-biphenyl [Ar-Si(OEt)(3)] under alkaline conditions. R(F)-(VM-SiO(2))(n)-R(F)/Ar-SiO(2) nanocomposites were applied to the surface modification of PMMA to exhibit not only a good oleophobicity imparted by fluorine but also a fluorescent emission ability on the surface. Methanol sol solutions of R(F)-(VM-SiO(2))(n)-R(F)/Ar-SiO(2) nanocomposites were effective for the surface modification of glass through the dipping technique to exhibit good oleophobicity with superhydrophobicity on the modified glass surface. On the other hand, 1,2-dichloroethane sol solutions enabled R(F)-(VM-SiO(2))(n)-R(F)/Ar-SiO(2) nanocomposites to exhibit both superhydrophobic and superoleophobic characteristics on the modified surface through dipping the glass in these sol solutions.

Synthesis of thiol capped CdS nanocrystallites using microwave irradiation and studies on their steady state and time resolved photoluminescence

Synthesis of cadmium sulfide (CdS) nanocrystallites has been performed through the microwave (MW) assisted reaction of cadmium acetate with thiourea in N,N-dimethylformamide (DMF) in the presence of two capping agents, 1-butanethiol and 2-mercaptoethanol. Attempts were made to control the size and size distribution of the thiol capped CdS nanocrystallites by controlling the number of MW irradiations/exposures for a fixed time (duration). The prepared nanocrystallites have been characterized by UV-vis spectroscopy, FTIR, XRD, FESEM and TEM. The peak position of the absorption band of the 1-butanethiol caped CdS nanocrystals in DMF solution shifted towards longer wavelength with the increasing number of MW exposures indicating the growth of particle size. In contrast, the peak position of absorption band for the 2-mercaptoethanol capped CdS nanocrystals remained nearly at the same wavelength and only the intensity of the absorption band increased with the increasing number of MW exposures. The observed steady state photoluminescence (visible range) of the 1-butanethiol capped CdS nanocrystals in DMF solution shifted towards higher wavelength, showing a decrease in intensity, with the increase in the number of MW exposures. Whereas in the case of 2-mercaptoethanol capped CdS nanocrystals in DMF solution, the photoluminescence peak remained nearly at the same position showing a decrease in intensity with increase in the number of MW exposures. The interesting results on the size-dependent steady state and time resolved photoluminescence (PL) of the CdS nanocrystallites are discussed in the present article. Possible application of such studies in the area of biotechnology has been mentioned.

CHARACTERISTIC PHOTOLUMINESCENCE OF SWCNT/CdS NANOHYBRID SYNTHESIZED BY A SIMPLE CHEMICAL ROUTE

The authors report a simple chemical technique to prepare a hybrid nanostructure of single wall carbon nanotubes (SWCNT) with CdS nanocrystals. By chemical reaction of cadmium acetate and sodium sulphide in the sodium dodecyl sulphate (SDS) solution containing SWCNT, cadmium sulphide quantum dots (QDs) of average size 5.5 nm are decorated onto the walls of SWCNT bundles. The hybrid material has been characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and Raman spectroscopy. Characteristic optical properties of the hybrid structure have been identified through UV-Vis and photoluminescence (PL) spectroscopy.

Adsorption in periodically ordered mesoporous organosilica materials studied by in situ small-angle X-ray scattering and small-angle neutron scattering

Modified periodically ordered mesoporous organosilica materials were prepared starting from a recently introduced type of sol-gel precursor, containing both organic moieties and hydrolyzable Si-OR groups. In order to thoroughly characterize the mesoporosity and its accessibility, different probe gases were used in conventional gas adsorption experiments. Furthermore, in situ small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS) were applied to study the mesoporosity and the sorption processes, taking advantage of scattering contrast matching conditions. Thereby, the materials were characterized not only by different probe molecules but also at different temperatures (nitrogen at 77 K, dibromomethane at 290 K and perfluoropentane at 276 K). The comparison between the standard and in situ SAXS/SANS adsorption experiments revealed valuable information about the porosity and microstructure of the materials. It is demonstrated that the organic moieties are homogeneously distributed; that is, they do not phase-separate from silica on the nanometer scale.

Sustainable green catalysis by supported metal nanoparticles

The recent progress of sustainable green catalysis by supported metal nanoparticles is described. The template synthesis of metal nanoparticles in ordered porous materials is studied for the rational design of heterogeneous catalysts capable of high activity and selectivity. The application of these materials in green catalytic processes results in a unique activity and selectivity arising from the concerted effect of metal nanoparticles and supports. The high catalytic performances of Pt nanoparticles in mesoporous silica is reported. Supported metal catalysts have also been applied to biomass conversion by heterogeneous catalysis. Additionally, the degradation of cellulose by supported metal catalysts, in which bifunctional catalysis of acid and metal plays the key role for the hydrolysis and reduction of cellulose, is also reported.

Textural manipulation of mesoporous materials for hosting of metallic nanocatalysts

The preparation and stabilization of nanoparticles are becoming very crucial issues in the field of so-called "nanocatalysis". Recent developments in supramolecular self-assembled porous materials have opened a new way to get nanoparticles hosted in the channels of such materials. In this paper, a new approach towards monodisperse and thermally stable metal nanoparticles by confining them in ordered mesoporous materials is presented, and three aspects are illustrated. Firstly, the recent progress in the functional control of mesoporous materials will be briefly introduced, and the rational tuning of the textures, pore size, and pore length is demonstrated by controlling supramolecular self-assembly behavior. A novel synthesis of short-pore mesoporous materials is emphasized for their easy mass transfer in both biomolecule absorption and the facile assembly of metal nanocomposites within their pore channels. In the second part, the different routes for encapsulating monodisperse nanoparticles inside channels of porous materials are discussed, which mainly includes the ion-exchange/conventional incipient wetness impregnation, in situ encapsulation routes, organometallic methodologies, and surface functionalization schemes. A facile in situ autoreduction route is highlighted to get monodisperse metal nanoparticles with tunable sizes inside the channels of mesoporous silica. Finally, confinement of mesoporous materials is demonstrated to improve the thermal stability of monodisperse metal nanoparticles catalysts and a special emphasis will be focused on the stabilization of the metal nanoparticles with a low Tammann temperature. Several catalytic reactions concerning the catalysis of nanoparticles will be presented. These uniform nanochannels, which confine monodisperse and stable metal nanoparticles catalysts, are of great importance in the exploration of size-dependent catalytic chemistry and further understanding the nature of catalytic reactions.