On the mechanism of (PCP)Ir-catalyzed acceptorless dehydrogenation of alkanes: a combined computational and experimental study

Mechanistic Insight of High-Valent First-Row Transition Metal Complexes for Dehydrogenation of Ammonia Borane

Designing an efficient and cost-effective catalyst for ammonia borane (AB) dehydrogenation remains a persistent challenge in advancing a hydrogen-based economy. Transition metal complexes, known for their C-H bond activation capabilities, have emerged as promising candidates for AB dehydrogenation. In this study, we investigated two recently synthesized C-H activation catalysts, 1 (CoIV-dinitrate complex) and 2 (NiIV-nitrate complex), and demonstrated their efficacy for AB dehydrogenation. Using density functional theory calculations and a detailed analysis, we elucidated the AB dehydrogenation mechanism of these complexes. Our results revealed that both complexes 1 and 2 can efficiently dehydrogenate AB at room temperature, although the abstraction of molecular H2 from these complexes requires slightly elevated temperatures. We utilized H2 binding free energy calculations to identify potentially active sites and observed that complex 2 can release two equivalents of H2 at a temperature slightly higher than room temperature. Furthermore, we investigated AB dehydrogenation kinetics and thermodynamics in iron (Fe)-substituted systems, complexes 3 and 4. Our results showed that the strategic alteration of the central metal atom, replacing Ni in complex 2 with Fe in complex 4, resulted in enhanced kinetics and thermodynamics for AB dehydrogenation in the initial cycle. These results underscore the potential of high-valent first-row transition metal complexes for facilitating AB dehydrogenation at room temperature. Additionally, our study highlights the beneficial impact of incorporating iron into such mononuclear systems, enhancing their catalytic activity.

Catalytic Chemical Recycling of Post-Consumer Polyethylene

Among commercial plastics, polyolefins are the most widely produced worldwide but have limited recyclability. Here, we report a chemical recycling route for the conversion of post-consumer high-density polyethylene (HDPE) into telechelic macromonomers suitable for circular reprocessing. Unsaturation was introduced into HDPE by catalytic dehydrogenation using an Ir-POCOP catalyst without an alkene acceptor. Cross-metathesis with 2-hydroxyethyl acrylate followed by hydrogenation transformed the partially unsaturated HDPE into telechelic macromonomers. The direct repolymerization of the macromonomers gave a brittle material due to the low overall weight-average molecular weight. Aminolysis of telechelic macromonomers with a small amount of diethanolamine increased the overall functionality. The resulting macromonomers were repolymerized through transesterification to generate a polymer with comparable mechanical properties to the starting post-consumer HDPE waste. Depolymerization of the repolymerized material catalyzed by an organic base regenerated the telechelic macromonomers, thereby allowing waste polyethylene materials to enter a chemical recycling pathway.

Acceptorless dehydrogenative synthesis of primary amides from alcohols and ammonia

The highly desirable synthesis of the widely-used primary amides directly from alcohols and ammonia via acceptorless dehydrogenative coupling represents a clean, atom-economical, sustainable process. Nevertheless, such a reaction has not been previously reported, and the existing catalytic systems instead generate other N-containing products, e.g., amines, imines and nitriles. Herein, we demonstrate an efficient and selective ruthenium-catalyzed synthesis of primary amides from alcohols and ammonia gas, accompanied by H2 liberation. Various aliphatic and aromatic primary amides were synthesized in high yields, with no observable N-containing byproducts. The selectivity of this system toward primary amide formation is rationalized through density functional theory (DFT) calculations, which show that dehydrogenation of the hemiaminal intermediate into primary amide is energetically favored over its dehydration into imine.

Cooperative Hydrogen Atom Transfer: From Theory to Applications

Hydrogen atom transfer (HAT) is one of the fundamental transformations of organic chemistry, allowing the interconversion of open- and closed-shell species through the concerted movement of a proton and an electron. Although the value of this transformation is well appreciated in isolation, with it being used for homolytic C–H activation via abstractive HAT and radical reduction via donative HAT, cooperative HAT (cHAT) reactions, in which two hydrogen atoms are removed or donated to vicinal reaction centers in succession through radical intermediates, are comparatively unknown outside of the mechanism of desaturase enzymes. This tandem reaction scheme has important ramifications in the thermochemistry of each HAT, with the bond dissociation energy (BDE) of the C–H bond adjacent to the radical center being significantly lowered relative to that of the parent alkane, allowing each HAT to be performed by different species. Herein, we discuss the thermodynamic basis of this bond strength differential in cHAT and demonstrate its use as a design principle in organic chemistry for both dehydrogenative (application 1) and hydrogenative (application 2) reactions. We hope that this overview will highlight the exciting reactivity that is possible with cHAT and inspire further developments with this mechanistic approach.

1 Introduction and Theory

2 Application: Dehydrogenative Transformations

3 Application: Alkene Hydrogenation

4 Future Applications of cHAT

Ruthenium-Catalyzed Dehydrogenation Through an Intermolecular Hydrogen Atom Transfer Mechanism

The direct dehydrogenation of alkanes is among the most efficient ways to access valuable alkene products. Although several catalysts have been designed to promote this transformation, they have unfortunately found limited applications in fine chemical synthesis. Here, we report a conceptually novel strategy for the catalytic, intermolecular dehydrogenation of alkanes using a ruthenium catalyst. The combination of a redox-active ligand and a sterically hindered aryl radical intermediate has unleashed this novel strategy. Importantly, mechanistic investigations have been performed to provide a conceptual framework for the further development of this new catalytic dehydrogenation system.

Mechanistic Investigations of Ruthenium Catalyzed Dehydrogenative Thioester Synthesis and Thioester Hydrogenation

We have recently reported the previously unknown synthesis of thioesters by coupling thiols and alcohols (or aldehydes) with liberation of H₂, as well as the reverse hydrogenation of thioesters, catalyzed by a well-defined ruthenium acridine-9H based pincer complex. These reactions are highly selective and are not deactivated by the strongly coordinating thiols. Herein, the mechanism of this reversible transformation is investigated in detail by a combined experimental and computational (DFT) approach. We elucidate the likely pathway of the reactions, and demonstrate experimentally how hydrogen gas pressure governs selectivity toward hydrogenation or dehydrogenation. With respect to the dehydrogenative process, we discuss a competing mechanism for ester formation, which despite being thermodynamically preferable, it is kinetically inhibited due to the relatively high acidity of thiol compared to alcohol and, accordingly, the substantial difference in the relative stabilities of a ruthenium thiolate intermediate as opposed to a ruthenium alkoxide intermediate. Accordingly, various additional reaction pathways were considered and are discussed herein, including the dehydrogenative coupling of alcohol to ester and the Tischenko reaction coupling aldehyde to ester. This study should inform future green, (de)hydrogenative catalysis with thiols and other transformations catalyzed by related ruthenium pincer complexes.

A leap forward in iridium-NHC catalysis: new horizons and mechanistic insights

This review summarises the most recent advances in Ir-NHC catalysis while revisiting all the classical reactions in which this type of catalyst has proved to be active. The influence of the ligand system and, in particular, the impact of the NHC ligand on the activity and selectivity of the reaction have been analysed, accompanied by an examination of the great variety of catalytic cycles hitherto reported. The reaction mechanisms so far proposed are described and commented on for each individual process. Moreover, some general considerations that attempt to explain the influence of the NHC from a mechanistic viewpoint are presented at the end of the review. The first sections are dedicated to the most widely explored reactions that use Ir-NHCs, i.e., hydrogenation and transfer hydrogenation, for which a general overview that tries to compile all the Ir-NHC catalysts hitherto reported for these processes is provided. The next sections deal with hydrogen borrowing, hydrosilylation, water splitting, dehydrogenation (of alcohols, alkanes, aminoboranes and formic acid), hydrogen isotope exchange (HIE), signal amplification by reversible exchange and C-H bond functionalisation (silylation and borylation). The last section compiles a series of reactions somewhat less explored for Ir-NHC catalysts that include the hydroalkynylation of imines, hydroamination, diboration of olefins, hydrolysis and methanolysis of silanes, arylation of aldehydes with boronic acids, addition of aroyl chlorides to alkynes, visible light driven reactions, isomerisation of alkenes, asymmetric intramolecular allylic amination and reactions that employ heterometallic catalysts containing at least one Ir-NHC unit.

Rational design of model Pd(ii)-catalysts for C–H activation involving ligands with charge-shift bonding characteristics

A palladium(ii) complex with a bis-2-borabicyclo[1.1.0]but-1(3)-ene ligand having charge-shift bonding characteristics contributes to better performance for C–H bond activation.

Electrochemical and chemical routes to hydride loss from an iridium dihydride

With a view towards replacing sacrificial hydrogen acceptors in alkane dehydrogenation catalysis, electrochemical methods for oxidative activation of a pincer-ligated iridium hydride intermediate were explored. A 1H(+)/2e(-) oxidation process was observed in THF solvent, with net hydride loss leading to a reactive cationic intermediate that can be trapped by chloride. Analogous reactivity was observed with the concerted hydride transfer reagent Ph3C(+), connecting chemical and electrochemical hydride loss pathways.

Mechanisms for dehydrogenation and hydrogenation of N-heterocycles using PNP-pincer-supported iron catalysts: a density functional study

The bifunctionality of Fe-PNP plays a role in stabilizing the ion-pair complex in the dehydrogenation via a hydrogen bonding and a C–H agostic interaction.

Orthogonal tandem catalysis

Tandem catalysis is a growing field that is beginning to yield important scientific and technological advances toward new and more efficient catalytic processes. 'One-pot' tandem reactions, where multiple catalysts and reagents, combined in a single reaction vessel undergo a sequence of precisely staged catalytic steps, are highly attractive from the standpoint of reducing both waste and time. Orthogonal tandem catalysis is a subset of one-pot reactions in which more than one catalyst is used to promote two or more mechanistically distinct reaction steps. This Perspective summarizes and analyses some of the recent developments and successes in orthogonal tandem catalysis, with particular focus on recent strategies to address catalyst incompatibility. We also highlight the concept of thermodynamic leveraging by coupling multiple catalyst cycles to effect challenging transformations not observed in single-step processes, and to encourage application of this technique to energetically unfavourable or demanding reactions.

Computational design of an Iridium based catalyst for releasing H2 from hydrogenated BN nanotubes

Theoretical investigations reveal that Ir pincer complexes can release molecular hydrogen from hydrogenated boron nitride nanotubes at room temperature accessible free energy barriers.

Synthesis and characterization of carbazolide-based iridium PNP pincer complexes. Mechanistic and computational investigation of alkene hydrogenation: evidence for an Ir(III)/Ir(V)/Ir(III) catalytic cycle

New carbazolide-based iridium pincer complexes ((carb)PNP)Ir(C2H4), 3a, and ((carb)PNP)Ir(H)2, 3b, have been prepared and characterized. The dihydride, 3b, reacts with ethylene to yield the cis-dihydride ethylene complex cis-((carb)PNP)Ir(C2H4)(H)2. Under ethylene this complex reacts slowly at 70 °C to yield ethane and the ethylene complex, 3a. Kinetic analysis establishes that the reaction rate is dependent on ethylene concentration and labeling studies show reversible migratory insertion to form an ethyl hydride complex prior to formation of 3a. Exposure of cis-((carb)PNP)Ir(C2H4)(H)2 to hydrogen results in very rapid formation of ethane and dihydride, 3b. DFT analysis suggests that ethane elimination from the ethyl hydride complex is assisted by ethylene through formation of ((carb)PNP)Ir(H)(Et)(C2H4) and by H2 through formation of ((carb)PNP)Ir(H)(Et)(H2). Elimination of ethane from Ir(III) complex ((carb)PNP)Ir(H)(Et)(H2) is calculated to proceed through an Ir(V) complex ((carb)PNP)Ir(H)3(Et) which reductively eliminates ethane with a very low barrier to return to the Ir(III) dihydride, 3b. Under catalytic hydrogenation conditions (C2H4/H2), cis-((carb)PNP)Ir(C2H4)(H)2 is the catalyst resting state, and the catalysis proceeds via an Ir(III)/Ir(V)/Ir(III) cycle. This is in sharp contrast to isoelectronic (PCP)Ir systems in which hydrogenation proceeds through an Ir(III)/Ir(I)/Ir(III) cycle. The basis for this remarkable difference is discussed.

Reactions of late transition metal complexes with molecular oxygen

Limited natural resources, high energy consumption, economic considerations, and environmental concerns demand that we develop new technologies for the sustainable production of chemicals and fuels. New methods that combine the selective activation of C-H bonds of hydrocarbons with oxidation by a green oxidant such as molecular oxygen would represent huge advances toward this goal. The spectacular selectivity of transition metals in cleaving C-H bonds offers the potential for the direct use of hydrocarbons in the production of value-added organics such as alcohols. However, the use of oxygen, which is abundant, environmentally benign, and inexpensive (particularly from air), has proven challenging, and more expensive and less green oxidants are often employed in transition-metal-catalyzed reactions. Advances in the use of oxygen as an oxidant in transition-metal-catalyzed transformations of hydrocarbons will require a better understanding of how oxygen reacts with transition metal alkyl and hydride complexes. For alkane oxidations, researchers will need to comprehend and predict how metals that have shown particularly high activity and selectivity in C-H bond activation (e.g. Pt, Pd, Rh, Ir) will react with oxygen. In this Account, we present our studies of reactions of late metal alkyls and hydrides with molecular oxygen, emphasizing the mechanistic insights that have emerged from this work. Our studies have unraveled some of the general mechanistic features of how molecular oxygen inserts into late metal hydride and alkyl bonds along with a nascent understanding of the scope and limitations of these reactions. We present examples of the formation of metal hydroperoxide species M-OOH by insertion of dioxygen into Pt(IV)-H and Pd(II)-H bonds and show evidence that these reactions proceed by radical chain and hydrogen abstraction pathways, respectively. Comparisons with recent reports of insertion of oxygen into other Pd(II)-H complexes, and also into Ir(III)-H and Rh(III)-H complexes, point to potentially general mechanisms for this type of reaction. Additionally, we observed oxygen-promoted C-H and H-H reductive elimination reactions from five-coordinate Ir(III) alkyl hydride and dihydride complexes, respectively. Further, when Pd(II)Me(2) and Pt(II)Me(2) complexes were exposed to oxygen, insertion processes generated M-OOMe complexes. Mechanistic studies for these reactions are consistent with radical chain homolytic substitution pathways involving five-coordinate M(III) intermediates. Due to the remarkable ability of Pt(II) and Pd(II) to activate the C-H bonds of hydrocarbons (RH) and form M-R species, this reactivity is especially exciting for the development of partial alkane-oxidation processes that utilize molecular oxygen. Our understanding of how late transition metal alkyls and hydrides react with molecular oxygen is growing rapidly and will soon approach our knowledge of how other small molecules such as olefins and carbon monoxide react with these species. Just as advances in understanding olefin and CO insertion reactions have shaped important industrial processes, key insight into oxygen insertion should lead to significant gains in sustainable commercial selective oxidation catalysis.