Conformational analysis of the eight-membered ring of the oxidized cysteinyl-cysteine unit implicated in nicotinic acetylcholine receptor ligand recognition

Intramolecular Disulfide Bridges in Voltage-Dependent Anion Channel 2 (VDAC2) Protein from Rattus norvegicus Revealed by High-Resolution Mass Spectrometry

Voltage-Dependent Anion Channel isoforms (VDAC1, VDAC2, and VDAC3) are relevant components of the outer mitochondrial membrane (OMM) and play a crucial role in regulation of metabolism and in survival pathways. As major players in the regulation of cellular metabolism and apoptosis, VDACs can be considered at the crossroads between two broad families of pathologies, namely, cancer and neurodegeneration, the former being associated with elevated glycolytic rate and suppression of apoptosis in cancer cells, the latter characterized by mitochondrial dysfunction and increased cell death. Recently, we reported the characterization of the oxidation pattern of methionine and cysteines in rat and human VDACs showing that each cysteine in these proteins is present with a preferred oxidation state, ranging from the reduced to the trioxidized form, and such an oxidation state is remarkably conserved between rat and human VDACs. However, the presence and localization of disulfide bonds in VDACs, a key point for their structural characterization, have so far remained undetermined. Herein we have investigated by nanoUHPLC/High-Resolution nanoESI-MS/MS the position of intramolecular disulfide bonds in rat VDAC2 (rVDAC2), a protein that contains 11 cysteines. To this purpose, extraction, purification, and enzymatic digestions were carried out at slightly acidic or neutral pH in order to minimize disulfide bond interchange. The presence of six disulfide bridges was unequivocally determined, including a disulfide bridge linking the two adjacent cysteines 4 and 5, a disulfide bridge linking cysteines 9 and 14, and the alternative disulfide bridges between cysteines 48, 77, and 104. A disulfide bond, which is very resistant to reduction, between cysteines 134 and 139 was also detected. In addition to the previous findings, these results significantly extend the characterization of the oxidation state of cysteines in rVDAC2 and show that it is highly complex and presents unusual features. Data are available via ProteomeXchange with the identifier PXD044041.

Complete amide cis-trans switching synchronized with disulfide bond formation and cleavage in a proline-mimicking system

A typical naturally occurring disulfide structure in proteins is an 8-membered disulfide ring formed between two adjacent cysteine (Cys-Cys) residues. Based on this structure, we designed 7- to 9-membered disulfide ring molecules, embedded in the 7-azabicyclo[2.2.1]heptane skeleton, that switch their conformation from exclusively trans-amide to exclusively cis-amide upon redox transformation from dithiol to disulfide, and vice versa. Constrained shape of disulfide rings is rare in nature, and the present molecular structure is expected to be a useful fundamental component for the construction of new conformation-switching systems.

Ligand-induced transition in conformations of vicinal cysteine disulfides in proteins

Vicinal cysteine disulfides are thought to be associated with specific conformations of cysteine disulfides due to the restricted rotation of single bonds in an eight-membered cyclic disulfide loop. Conformations of vicinal cysteine disulfides are analyzed using χ₁ , χ₂ , χ₃ , χ₂ ', χ₁ ' torsion angles in the crystal structures of proteins retrieved from Protein Data Bank (PDB). 85% of vicinal disulfides have (+, -)LHStaple conformation with trans configuration of the peptide bond and 9% have (-, -)RHStaple conformation with cis configured peptide bond. Conformational analysis of dipeptide Cys-Cys vicinal disulfide by density functional theory (DFT) further supported (+, -)LHStaple, (-, -)RHStaple, and (+, +)RHStaple as the preferred conformations of vicinal disulfides. Interestingly, the rare conformations of vicinal disulfides are observed in the ligand-bound forms of proteins and have higher disulfide strain energy. Conformations of vicinal disulfides in palmitoyl protein thioesterase 1, AChBP, and α7 nicotinic receptor are changed from preferred (+, -)LHStaple to rare (+, -)AntiLHHook/(+, -)AntiRHHook/(+, +)RHStaple conformation due to binding of ligands. Surprisingly, ligands are proximal to the vicinal disulfides in protein complexes that exhibited rare conformations of vicinal disulfides. The report has identified (+, -) LHStaple/(-, -) RHStaple as the hallmark conformations of vicinal disulfides and unraveled ligand-induced transition in conformations of vicinal cysteine disulfides in proteins.

Conformation dynamics of cyclic disulfides and selenosulfides in CXXC(U) (X = Gly, Ala) tetrapeptide redox motifs

Thioredoxin fold proteins often contain a Cys-(Xxx)_n -Cys(Sec) or CX_n C(U) motif, where the active cysteine (C) or selenocysteine (U) is bridged by X residues, which vary with protein function. The effect of the X residues on the conformation space of the oxidized disulfide and selenosulfide forms of the CXXC(U) motif has been investigated using molecular dynamics (MD) and density functional theory. Multi-microsecond-length MD simulations of the CGGC, CGAC, and CAGC cyclic peptides show that CGGC rings readily exchange between several conformations over the course of the simulation, but steric interactions with the methyl group of Ala limit the conformation space available to the cyclic peptide, especially for CGAC. The potential for the motif to be reduced, as measured by the energy of the lowest unoccupied molecular orbitals, is dependent upon the ring conformation. These results suggest that control of available conformations by the bridging residues and the protein tertiary structure may be important for defining the function of the CXXC motif. Theoretical ⁷⁷ Se chemical shifts of the selenosulfide moiety are dependent upon the conformation and/or intramolecular Se···O interactions with the backbone carbonyl group of the C-terminal U residue.

Amide nitrogen pyramidalization changes lactam amide spinning

Although cis-trans lactam amide rotation is fundamentally important, it has been little studied, except for a report on peptide-based lactams. Here, we find a consistent relationship between the lactam amide cis/trans ratios and the rotation rates between the trans and cis lactam amides upon the lactam chain length of the stapling side-chain of two 7-azabicyclo[2.2.1]heptane bicyclic units, linked through a non-planar amide bond. That is, as the chain length increased, the rotational rate of trans to cis lactam amide was decreased, and consequently the trans ratio was increased. This chain length-dependency of the lactam amide isomerization and our simulation studies support the idea that the present lactam amides can spin through 360 degrees as in open-chain amides, due to the occurrence of nitrogen pyramidalization. The tilting direction of the pyramidal amide nitrogen atom of the bicyclic systems is synchronized with the direction of the semicircle-rotation of the amide.

Cis-trans lactam amide rotation is a fundamental process and its understanding might aid molecular design. Here, the authors report the synthesis and study of bicyclic lactams which undergo spin through 360 degrees as in open-chain amides, due to the occurrence of nitrogen pyramidalization.

Broad Analysis of Vicinal Disulfides: Occurrences, Conformations with Cis or with Trans Peptides, and Functional Roles Including Sugar Binding

Vicinal disulfides between sequence-adjacent cysteine residues are very rare and rather startling structural features which play a variety of functional roles. Typically discussed as an isolated curiosity, they have never received a general treatment covering both cis and trans forms. Enabled by the growing database of high-resolution structures, required deposition of diffraction data, and improved methods for discriminating reliable from dubious cases, we identify and describe distinct protein families with reliably genuine examples of cis or trans vicinal disulfides and discuss their conformations, conservation, and functions. No cis-trans interconversions and only one case of catalytic redox function are seen. Some vicinal disulfides are essential to large, functionally coupled motions, whereas most form the centers of tightly packed internal regions. Their most widespread biological role is providing a rigid hydrophobic contact surface under the undecorated side of a sugar or multiring ligand, contributing an important aspect of binding specificity.

Redox active motifs in selenoproteins

Selenoproteins use the rare amino acid selenocysteine (Sec) to act as the first line of defense against oxidants, which are linked to aging, cancer, and neurodegenerative diseases. Many selenoproteins are oxidoreductases in which the reactive Sec is connected to a neighboring Cys and able to form a ring. These Sec-containing redox motifs govern much of the reactivity of selenoproteins. To study their fundamental properties, we have used (77)Se NMR spectroscopy in concert with theoretical calculations to determine the conformational preferences and mobility of representative motifs. This use of (77)Se as a probe enables the direct recording of the properties of Sec as its environment is systematically changed. We find that all motifs have several ring conformations in their oxidized state. These ring structures are most likely stabilized by weak, nonbonding interactions between the selenium and the amide carbon. To examine how the presence of selenium and ring geometric strain governs the motifs' reactivity, we measured the redox potentials of Sec-containing motifs and their corresponding Cys-only variants. The comparisons reveal that for C-terminal motifs the redox potentials increased between 20-25 mV when the selenenylsulfide bond was changed to a disulfide bond. Changes of similar magnitude arose when we varied ring size or the motifs' flanking residues. This suggests that the presence of Sec is not tied to unusually low redox potentials. The unique roles of selenoproteins in human health and their chemical reactivities may therefore not necessarily be explained by lower redox potentials, as has often been claimed.

Conformational analysis of oxidized peptide fragments of the C-terminal redox center in thioredoxin reductases by NMR spectroscopy

Vicinal disulfide rings (VDRs) occur when a disulfide bond forms between adjacent cysteine residues in a protein and results in a rare eight-membered ring structure. This eight-membered ring has been found to exist in four major conformations in solution, divided between cis and trans conformers. Some selenoenzymes use a special type of VDR in which selenium replaces sulfur, generating a vicinal selenosulfide ring (VSeSR). Here, we provide evidence that this substitution reduces ring strain, resulting in a strong preference for the trans conformation relative to cis in a VSeSR (cis:trans - 9:91). This was determined by using the 'γ-gauche effect', which makes use of both (1) H-NMR and two-dimensional (2D) NMR techniques for determining the amide bond conformeric ratio. The presence of selenium in a VSeSR also lowers the dihedral strain energy (DSE) of the selenosulfide bond relative to the disulfide bond of VDRs. While cis amide geometry decreases strain on the amide bond, it increases strain on the scissile disulfide bond of the VDR found in thioredoxin reductase from Drosophila melanogaster (DmTR). We hypothesize that the cis conformation of the VDR is the catalytically competent conformer for thiol/disulfide exchange. This hypothesis was investigated by computing the DSE of VDR and VSeSR conformers, the structure of which was determined by 2D NMR spectroscopy and energy minimization. The computed values of the VDR from DmTR are 16.5 kJ/mol DSE and 14.3 kJ/mol for the C+ and T- conformers, respectively, supporting the hypothesis that the enzyme uses the C+ conformer for thiol/disulfide exchange.

Evidence for an extended hydrogen bond network in the binding site of the nicotinic receptor: role of the vicinal disulfide of the alpha1 subunit

The defining feature of the α subunits of the family of nicotinic acetylcholine receptors is a vicinal disulfide between Cys-192 and Cys-193. Although this structure has played a pivotal role in a number of pioneering studies of nicotinic receptors, its functional role in native receptors remains uncertain. Using mutant cycle analysis and unnatural residue mutagenesis, including backbone mutagenesis of the peptide bond of the vicinal disulfide, we have established the presence of a network of hydrogen bonds that extends from that peptide NH, across a β turn to another backbone hydrogen bond, and then across the subunit interface to the side chain of a functionally important Asp residue in the non-α subunit. We propose that the role of the vicinal disulfide is to distort the β turn and thereby properly position a backbone NH for intersubunit hydrogen bonding to the key Asp.

Structural and pharmacological effects of ring-closing metathesis in peptides

Applications of ring-closing alkene metathesis (RCM) in acyclic α- and β-peptides and closely related systems are reviewed, with a special emphasis on the structural and pharmacological effects of cyclization by RCM.

Selenium in thioredoxin reductase: a mechanistic perspective

Most high M(r) thioredoxin reductases (TRs) have the unusual feature of utilizing a vicinal disulfide bond (Cys(1)-Cys(2)) which forms an eight-membered ring during the catalytic cycle. Many eukaryotic TRs have replaced the Cys(2) position of the dyad with the rare amino acid selenocysteine (Sec). Here we demonstrate that Cys- and Sec-containing TRs are distinguished by the importance each class of enzymes places on the eight-membered ring structure in the catalytic cycle. This hypothesis was explored by studying the truncated enzyme missing the C-terminal ring structure in conjunction with oxidized peptide substrates to investigate the reduction and opening of this dyad. The peptide substrates were identical in sequence to the missing part of the enzyme, containing either a disulfide or selenylsulfide linkage, but were differentiated by the presence (cyclic) and absence (acyclic) of the ring structure. The ratio of these turnover rates informs that the ring is only of modest importance for the truncated mouse mitochondrial Sec-TR (ring/no ring = 32), while the ring structure is highly important for the truncated Cys-TRs from Drosophila melanogaster and Caenorhabditis elegans (ring/no ring > 1000). All three enzymes exhibit a similar dependence upon leaving group pK(a) as shown by the use of the acyclic peptides as substrates. These two factors can be reconciled for Cys-TRs if the ring functions to simultaneously allow for attack by a nearby thiolate while correctly positioning the leaving group sulfur atom to accept a proton from the enzymic general acid. For Sec-TRs the ring is unimportant because the lower pK(a) of the selenol relative to a thiol obviates its need to be protonated upon S-Se bond scission and permits physical separation of the selenol and the general acid. Further study of the biochemical properties of the truncated Cys and Sec TR enzymes demonstrates that the chemical advantage conferred on the eukaryotic enzyme by a selenol is the ability to function at acidic pH.

Synthesis, Redox Properties, and Conformational Analysis of Vicinal Disulfide Ring Mimics

A vicinal disulfide ring (VDR) results from disulfide bond formation between two adjacent cysteine residues. This 8-membered ring is a rare motif in protein structures and is functionally important to those few proteins that posses it. This article focuses on the construction of strained and unstrained VDR mimics, discernment of the preferred conformation of these mimics, and the determination of their respective disulfide redox potentials.

Synthesis of peptide substrates for mammalian thioredoxin reductase

Mammalian thioredoxin reductase (TR) catalyzes the reduction of the redox-active disulfide bond of thioredoxin (Trx) and is similar in structure and mechanism to glutathione reductase except for a C-terminal 16-amino acid extension containing a rare vicinal selenylsulfide bond. This vicinal selenylsulfide bond is essentially a substrate for the enzyme's N-terminal redox center. Here we report the synthesis of peptide substrates for the truncated enzyme missing the C-terminal redox center. We developed a procedure for the synthesis of peptides containing cyclic vicinal disulfide/selenylsulfide bonds as well as their corresponding acyclic heterodimers. Vicinal disulfide bonds form eight-membered ring structures and are difficult to synthesize owing to their propensity to dimerize during oxidation. Our procedure makes use of two key improvements for on-resin disulfide bond formation presented previously by Galande and coworkers (Galande AK, Weissleder R, Tung C-H. An effective method of on-resin disulfide bond formation in peptides. J. Comb. Chem. 2005; 7: 174-177). First, the addition of an amine base to the deprotection solution allows the complete removal of the StBu group, allowing it to be replaced with a 5-Npys group. The second enhancement is the direct use of a Cys(Mob) or Sec(Mob) derivative as the nucleophilic partner instead of utilizing a naked sulfhydryl or selenol. These improvements result in the formation of a vicinal disulfide (or selenylsulfide) bond in high purity and yield. A direct comparison with the Galande procedure is presented. We also present a novel strategy for the formation of an acyclic, interchain selenylsulfide-linked peptide (linking H-PTVTGC-OH and H-UG-OH). Cysteine analogs of the cyclic and acyclic peptides were also synthesized. The results show that the ring structure contributes a factor of 52 to the rate, but the presence of selenium in the peptide is more important to catalysis than the presence of the ring.

Human IgG2 antibodies display disulfide-mediated structural isoforms

In this work, we present studies of the covalent structure of human IgG2 molecules. Detailed analysis showed that recombinant human IgG2 monoclonal antibody could be partially resolved into structurally distinct forms caused by multiple disulfide bond structures. In addition to the presently accepted structure for the human IgG2 subclass, we also found major structures that differ from those documented in the current literature. These novel structural isoforms are defined by the light chain constant domain (C(L)) and the heavy chain C(H)1 domain covalently linked via disulfide bonds to the hinge region of the molecule. Our results demonstrate the presence of three main types of structures within the human IgG2 subclass, and we have named these structures IgG2-A, -B, and -A/B. IgG2-A is the known classic structure for the IgG2 subclass defined by structurally independent Fab domains and hinge region. IgG2-B is a structure defined by a symmetrical arrangement of a (C(H)1-C(L)-hinge)(2) complex with both Fab regions covalently linked to the hinge. IgG2-A/B represents an intermediate form, defined by an asymmetrical arrangement involving one Fab arm covalently linked to the hinge through disulfide bonds. The newly discovered structural isoforms are present in native human IgG2 antibodies isolated from myeloma plasma and from normal serum. Furthermore, the isoforms are present in native human IgG2 with either kappa or lambda light chains, although the ratios differ between the light chain classes. These findings indicate that disulfide structural heterogeneity is a naturally occurring feature of antibodies belonging to the human IgG2 subclass.

Natural and artificial cystine knots for assembly of homo- and heterotrimeric collagen models

Native collagens are molecules that are difficult to handle because of their high tendency towards aggregation and denaturation. It was discovered early on that synthetic collagenous peptides are more amenable to conformational characterization and thus can serve as useful models for structural and functional studies. Single-stranded collagenous peptides of high propensity to self-associate into triple-helical trimers were used for this purpose as well as interchain-crosslinked homotrimers assembled on synthetic scaffolds. With the growing knowledge of the biosynthetic pathways of natural collagens and the importance of their interchain disulfide crosslinks, which stabilize the triple-helical structure, native as well as de novo designed cystine knots have gained increasing attention in the assembly of triple-stranded collagen peptides. In addition, natural sequences of collagens were incorporated in order to biophysically characterize their functional epitopes. This review is focused on the methods developed over the years, and future perspectives for the production of collagen-mimicking synthetic and recombinant triple-helical homo- and heterotrimers.

Cysteine Pairs in the Third Intracellular Loop of the Muscarinic M1Acetylcholine Receptor Play a Role in Agonist-Induced Internalization

We determined the functional role of a small domain in the third intracellular loop of the human muscarinic M(1) (hM(1)) receptor. Using site-directed mutagenesis, several mutant hM(1) receptors were made possessing either a deletion or point mutations within the third intracellular loop domain (252)PETPPGRCCRCC(263). Wild-type and mutant hM(1) receptors were transiently expressed in Chinese hamster ovary cells, and the effects of each mutation on radioligand binding, agonist-mediated phosphoinositide hydrolysis, and agonist-induced internalization were determined. The mutant receptors exhibited a modest reduction in affinity for [(3)H]N-methylscopolamine (pK(D) = approximately 9.0) and a moderately increased binding capacity relative to the wild-type receptor. This moderate increase in binding capacity was associated with small increases in the maximal response and potency of carbachol for eliciting phosphoinositide hydrolysis through the mutant receptors (pEC(50) = approximately 5.5) relative to wild-type (pEC(50) = 5.35 +/- 0.05). In contrast, carbachol-induced internalization of mutant hM(1) receptors possessing either C259A/C260A or C262A/C263A or both double point mutations was significantly reduced compared to the wild-type hM(1) receptor. Of the hM(1) receptor mutants tested, those possessing a C262D/C263D double point mutation had the least carbachol-induced internalization. The desensitization and down-regulation of receptors possessing either Cys/Ala or Cys/Asp double point mutations were similar to those observed for the wild-type hM(1) receptor. Collectively, these observations suggest that Cys pairs Cys259/Cys260 and Cys262/Cys263 play an important role in the agonist-induced internalization of hM(1) receptors.

Structural and biochemical studies reveal differences in the catalytic mechanisms of mammalian and Drosophila melanogaster thioredoxin reductases

Thioredoxin reductase (TR) from Drosophila melanogaster (DmTR) is a member of the glutathione reductase (GR) family of pyridine nucleotide disulfide oxidoreductases and catalyzes the reduction of the redox-active disulfide bond of thioredoxin. DmTR is notable for having high catalytic activity without the presence of a selenocysteine (Sec) residue (which is essential for the mammalian thioredoxin reductases). We report here the X-ray crystal structure of DmTR at 2.4 A resolution (Rwork = 19.8%, Rfree = 24.7%) in which the enzyme was truncated to remove the C-terminal tripeptide sequence Cys-Cys-Ser. We also demonstrate that tetrapeptides equivalent to the oxidized C-terminal active sites of both mouse mitochondrial TR (mTR3) and DmTR are substrates for the truncated forms of both enzymes. This truncated enzyme/peptide substrate system examines the kinetics of the ring-opening step that occurs during the enzymatic cycle of TR. The ring-opening step is 300-500-fold slower when Sec is replaced with Cys in mTR3 when using this system. Conversely, when Cys is replaced with Sec in DmTR, the rate of ring opening is only moderately increased (5-36-fold). Structures of these tetrapeptides were oriented in the active site of both enzymes using oxidized glutathione bound to GR as a template. DmTR has a more open tetrapeptide binding pocket than the mouse enzyme and accommodates the peptide Ser-Cys-Cys-Ser(ox) in a cis conformation that allows for the protonation of the leaving-group Cys by His464', which helps to explain why this TR can function without the need for Sec. In contrast, mTR3 shows a narrower pocket. One possible result of this narrower interface is that the mammalian redox-active tetrapeptide Gly-Cys-Sec-Gly may adopt a trans conformation for a better fit. This places the Sec residue farther away from the protonating histidine residue, but the lower pKa of Sec in comparison to that of Cys eliminates the need for Sec to be protonated.

Kinetics and thermodynamics of type VIII beta-turn formation: a CD, NMR, and microsecond explicit molecular dynamics study of the GDNP tetrapeptide

We report an experimental and theoretical study on type VIII beta-turn using a designed peptide of sequence GDNP. CD and NMR studies reveal that this peptide exists in equilibrium between type VIII beta-turn and extended conformations. Extensive MD simulations give a description of the free energy landscape of the peptide in which we retrieve the same two main conformations suggested by the experiments. The free energy difference between the two conformational states is very small and the transition between them occurs within a few kT at 300 K on a nanosecond timescale. The equilibrium is mainly driven by entropic contribution, which favors extended conformations over beta-turns. This confirms other theoretical studies showing that beta-turns are marginally stable in water solution because of the larger entropy of the extended state unless some stabilizing interactions exist. Our observations may be extended to any type of beta-turn and have important consequences for protein folding. A comparison of our MD and CD results also suggests a possible type VIII beta-turn CD signature indicated by one main band at 200 nm, close to that of random coil, and a fairly large shoulder at 220 nm. Last, our results clearly show that the XXXP motif can only fold into a type VIII beta-turn, which is consistent with its fairly strong propensity for this type of turn. This important finding may help for peptide design and is in line with recent studies on bioactive elastin peptides.

The synthesis and evaluation of 10- and 12-membered ring benzofused enediyne amino acids

The enediyne moiety is a versatile functional group found in natural anticancer and anti-infective agents, undergoing the Bergman cyclization reaction to afford a diradical which cleaves double-stranded DNA. We have incorporated the enediyne group into 10- (4-10) and 12-membered ring (11) cyclic amino acids and dipeptides, respectively, and explored their relative reactivity toward cyclization, varying N-substitution in the case of the 10-membered ring substrate, which gave the expected cyclization products in good yields when using either thermal conditions in the presence or absence of microwave irradiation. The N-tosyl substituted derivative (4) was shown to nick double-stranded supercoiled DNA. N-Arylsulfonyl substitution on the ring promoted the cyclization, when compared to N-mesyl or acyl substitution, possibly because of a pi-pi stacking effect as an endo-relationship of the aryl group with the enediyne was demonstrated in both the solid state and in solution. The 12-membered ring enediyne dipeptide (11) was inert to the Bergman cyclization under a variety of conditions. When this substrate was irradiated with ultraviolet light, regio- and stereospecific reduction was observed in which one of the alkynes was reduced to a Z-olefin (47).

Development of ultra short-acting muscle relaxant agents: History, research strategies, and challenges

Author has reviewed the literature and his own work related to the chemistry, pharmacology, and clinical aspects of new muscle relaxants. Emphasis has been placed on the basic science concepts and technologies (e.g. structure-activity relationships, nicotinic receptor pharmacology, and investigation of side effects) behind the development of rapidly and short acting nondepolarizing muscle relaxants.

Adaptive evolution of cytochrome c oxidase: Infrastructure for a carnivorous plant radiation

Much recent attention in the study of adaptation of organismal form has centered on developmental regulation. As such, the highly conserved respiratory machinery of eukaryotic cells might seem an unlikely target for selection supporting novel morphologies. We demonstrate that a dramatic molecular evolutionary rate increase in subunit I of cytochrome c oxidase (COX) from an active-trapping lineage of carnivorous plants is caused by positive Darwinian selection. Bladderworts (Utricularia) trap plankton when water-immersed, negatively pressured suction bladders are triggered. The resetting of traps involves active ion transport, requiring considerable energy expenditure. As judged from the quaternary structure of bovine COX, the most profound adaptive substitutions are two contiguous cysteines absent in approximately 99.9% of databased COX I sequences from Eukaryota, Archaea, and Bacteria. This motif lies directly at the docking point of COX I helix 3 and cytochrome c, and modeling of bovine COX I suggests the possibility of an unprecedented helix-terminating disulfide bridge that could alter COX/cytochrome c dissociation kinetics. Thus, the key adaptation in Utricularia likely lies in molecular energetic changes that buttressed the mechanisms responsible for the bladderworts' radical morphological evolution. Along with evidence for COX evolution underlying expansion of the anthropoid neocortex, our findings underscore that important morphological and physiological innovations must often be accompanied by specific adaptations in proteins with basic cellular functions.

Design, synthesis, and conformational analysis of eight-membered cyclic peptidomimetics prepared using ring closing metathesis

As part of a program to identify novel scaffolds that adopt defined secondary structure when incorporated into peptides, we have designed and prepared a library of constrained eight-membered ring lactams based upon 7-amino-8-oxo-1,2,3,6,7-pentahydroazocine-2-carboxylic acid. Ring closing metathesis (RCM) was employed as the key step, proceeding in high yields to afford the Z olefin. In this reaction sequence, the first generation benzylidene ruthenium RCM catalyst was superior to the second-generation imidazoline catalyst, which gave extensive oligomerization at higher concentrations. Conformational analysis of the 2S,7S and 2R,7S stereoisomers revealed that the 2R,7S isomer is a Type VIa beta-turn in the solid state (X-ray crystal structure) and in water (NMR analysis). The Type VIa beta-turn is relatively rare, typically bearing the cis amide bond found in proline-containing sequences. The 2S,7S diastereomer has an extended geometry of the pendent amide chains. The corresponding saturated derivatives (7-amino-8-oxoazocane-2-carboxylic acid) were also synthesized and investigated. The 2S,7S azocane bears an extended geometry and mimics the C(+) conformer of ox-[Cys-Cys], found in a variety of naturally occurring peptides. The scaffolds described here are useful for the design of constrained peptidomimics with defined secondary structure.

Vicinal disulfide bridge conformers by experimental methods and by ab initio and DFT molecular computations

A systematic comparison is made between experimental and computational data gained on vicinal disulfide bridges in proteins and peptides. Structural and stability data of ab initio and density functional theory (DFT) calculations on the model compound 4,5-ditiaheptano-7-lactam and the model peptide HCO-ox-[Cys-Cys]-NH2 at RHF/3-21G*, B3LYP/6-31+G(d), and B3LYP/6-311++G(d,p) levels of theory are presented. The data on Xxx-Cys-Cys-Yyy type amino acid sequence units retrieved from PDB SELECT, along with data on sequence units that have vicinal disulfide bridge, taken from the Brookhaven Protein Data Bank, are conformationally characterized. Amino acid backbone conformations, cis-trans isomerism of the amide bond between the two cysteine residues, and ring puckering are studied. Ring puckers are characterized by their relation to the conformers of the parent 4,5-ditiaheptano-7-lactam. Computational precision and accuracy are proved by frequency calculation and solvent model optimization on selected conformers. It is found that the ox-[Cys-Cys] unit is able to accept types I, II, VIa, VIb, and VIII beta-turn structures.

Acetylcholine binding protein (AChBP): a secreted glial protein that provides a high-resolution model for the extracellular domain of pentameric ligand-gated ion channels

Acetylcholine binding protein (AChBP) has recently been identified from molluskan glial cells. Glial cells secrete it into cholinergic synapses, where it plays a role in modulating synaptic transmission. This novel mechanism resembles glia-dependent modulation of glutamate synapses, with several key differences. AChBP is a homolog of the ligand binding domain of the pentameric ligand-gated ion-channels. The crystal structure of AChBP provides the first high-resolution structure for this family of Cys-loop receptors. Nicotinic acetylcholine receptors and related ion-channels such as GABAA, serotonin 5HT3, and glycine can be interpreted in the light of the 2.7 A AChBP structure. The structural template provides critical details of the binding site and helps create models for toxin binding, mutational effects, and molecular gating.