Metal nanowire formation using Mo(3)Se(3)(-) as reducing and sacrificing templates

Functionalization and Structural Evolution of Conducting Quasi-One-Dimensional Chevrel-Type Telluride Nanocrystals

Interfacing organic molecular groups with well-defined inorganic lattices, especially in low dimensions, enables synthetic routes for the rational manipulation of both their local or extended lattice structures and physical properties. While appreciably studied in two-dimensional systems, the influence of surface organic substituents on many known and emergent one-dimensional (1D) and quasi-1D (q-1D) crystals has remained underexplored. Herein, we demonstrate the surface functionalization of bulk and nanoscale Chevrel-like q-1D ionic crystals using In2Mo6Te6, a predicted q-1D Dirac semimetal, as the model phase. Using a series of alkyl ammonium (-NR4+; R = H, methyl, ethyl, butyl, and octyl) substituents with varying chain lengths, we demonstrate the systematic expansion of the intrachain c-axis direction and the contraction of the interchain a/b-axis direction with longer chain substituents. Additionally, we demonstrate the systematic expansion of the intrachain c-axis direction and the contraction of the interchain a/b-axis direction as the alkyl chain substituents become longer using a combination of powder X-ray diffraction and Raman experiments. Beyond the structural modulation that the substituted groups can impose on the lattice, we also found that the substitution of ammonium-based groups on the surface of the nanocrystals resulted in selective suspension in aqueous (NH4+-functionalized) or organic solvents (NOc4+-functionalized), imparted fluorescent character (Rhodamine B-functionalized), and modulated the electrical conductivity of the nanocrystal ensemble. Altogether, our results underscore the potential of organic-inorganic interfacing strategies to tune the structural and physical properties of rediscovered Chevrel-type q-1D ionic solids and open opportunities for the development of surface-addressable building blocks for hybrid electronic and optoelectronic devices at the nanoscale.

Nanowelding in Whole-Lifetime Bottom-Up Manufacturing: From Assembly to Service

The continuous miniaturization of microelectronics is pushing the transformation of nanomanufacturing modes from top-down to bottom-up. Bottom-up manufacturing is essentially the way of assembling nanostructures from atoms, clusters, quantum dots, etc. The assembly process relies on nanowelding which also existed in the synthesis process of nanostructures, construction and repair of nanonetworks, interconnects, integrated circuits, and nanodevices. First, many kinds of novel nanomaterials and nanostructures from 0D to 1D, and even 2D are synthesized by nanowelding. Second, the connection of nanostructures and interfaces between metal/semiconductor-metal/semiconductor is realized through low-temperature heat-assisted nanowelding, mechanical-assisted nanowelding, or cold welding. Finally, 2D and 3D interconnects, flexible transparent electrodes, integrated circuits, and nanodevices are constructed, functioned, or self-healed by nanowelding. All of the three nanomanufacturing stages follow the rule of "oriented attachment" mechanisms. Thus, the whole-lifetime bottom-up manufacturing process from the synthesis and connection of nanostructures to the construction and service of nanodevices can be organically integrated by nanowelding. The authors hope this review can bring some new perspective in future semiconductor industrialization development in the expansion of multi-material systems, technology pathway for the refined design, controlled synthesis and in situ characterization of complex nanostructures, and the strategies to develop and repair novel nanodevices in service.

Exceptional Mechanical Properties of Phase-Separation-Free Mo3Se3--Chain-Reinforced Hydrogel Prepared by Polymer Wrapping Process

As Mo₃Se₃^- chain nanowires have dimensions comparable to those of natural hydrogel chains (molecular-level diameters of ∼0.6 nm and lengths of several micrometers) and excellent mechanical strength and flexibility, they have large potential to reinforce hydrogels and improve their mechanical properties. When a Mo₃Se₃^--chain-nanowire-gelatin composite hydrogel is prepared simply by mixing Mo₃Se₃^- nanowires with gelatin, phase separation of the Mo₃Se₃^- nanowires from the gelatin matrix occurs in the micronetwork, providing only small improvements in their mechanical properties. In contrast, when the surface of the Mo₃Se₃^- nanowire is wrapped with the gelatin polymer, the chemical compatibility of the Mo₃Se₃^- nanowire with the gelatin matrix is significantly improved, which enables the fabrication of a phase-separation-free Mo₃Se₃^--reinforced gelatin hydrogel. The composite gelatin hydrogel exhibits significantly improved mechanical properties, including a tensile strength of 27.6 kPa, fracture toughness of 26.9 kJ/m³, and elastic modulus of 54.8 kPa, which are 367%, 868%, and 378% higher than those of the pure gelatin hydrogel, respectively. Furthermore, the amount of Mo₃Se₃^- nanowires added in the composite hydrogel is as low as 0.01 wt %. The improvements in the mechanical properties are significantly larger than those for other reported composite hydrogels reinforced with one-dimensional materials.

Strategies to synthesize various nanostructures of silver and their applications - a review

Due to their various beneficial application-based properties, such as behavior, structure, and size, the synthesis of silver nanoparticles (Ag-NPs) with different structures has become an interesting yet common task for researchers to produce nanostructures for applications in various fields. This is because silver nanoparticles have interesting and unique properties, such as optical and catalytic, resulting from their different structures and sizes. These properties extend the use of nanostructures in various fields of research, especially in medicine, pharmacy, electronics, etc. Also, variations in their parameters affect the structures and sizes of Ag-NPs. This review provides an overview/brief presentation of various methodologies used to synthesize different application-based silver nanoparticles and lists areas where these nanoparticles are suitable for use according to their specific structures and sizes.

One Dimensional Silver-based Nanomaterials: Preparations and Electrochemical Applications

One dimensional (1D) silver-based nanomaterials have a great potential in various fields because of their high specific surface area, high electric conductivity, optoelectronic properties, mechanical flexibility and high electro-catalytic efficiency. In this Review, the preparations of 1D silver-based nanomaterials is classified by structure composed of simple silver nanowires/rods/belts/tubes, core-shells, and hybrids. The latest applications based on 1D silver nanomaterials and their composite materials are summarized systematically including electrochemical capacitors, lithium-ion/lithium-oxygen batteries, electrochemical sensors and electrochemical catalysis. The preparation process, tailored material properties and electrochemical applications are discussed.

Conductive Nanowires Templated by Molecular Brushes

In this paper, we report the fabrication of conductive nanowires using polymer bottle brushes as templates. In our approach, we synthesized poly(2-dimethylamino)ethyl methacrylate methyl iodide quaternary salt brushes by two-step atom transfer radical polymerization, loaded them with palladium salt, and reduced them in order to form metallic nanowires with average lengths and widths of 300 and 20 nm, respectively. The obtained nanowires were deposited between conductive gold pads and were connected to them by sputtering of additional pads to form an electric circuit. We connected the nanowires in an electric circuit and demonstrated that the conductivity of these nanowires is around 100 S·m(-1).

Fabrication of Au nanotube arrays and their plasmonic properties

Large-scale Au nanotube arrays on ITO/glass with tunable inner diameters and wall thicknesses were fabricated via a CdSe nanotube array templating method. The initial tubular morphology of the CdSe-nanotube template was maintained during the synthesis, while the composition was converted from CdSe to Au. The obtained Au nanotube arrays showed two surface plasmon resonances in the extinction spectrum, mainly contributed by electron oscillation along the transverse and the longitudinal directions. When used as the substrate for surface-enhanced Raman spectroscopy (SERS), the Raman scattering of the probe molecules (4-mercaptobenzoic acid) was amplified by approximately 4 orders of magnitude, mainly due to the plasmonic enhancement effect of the Au nanotube arrays.

Controlled synthesis of one-dimensional inorganic nanostructures using pre-existing one-dimensional nanostructures as templates

Template-directed strategy has become one of the most popular methods for the fabrication of one-dimensional (1D) nanostructures with uniform size and controllable physical dimensions in recent years. This Review article describes the recent progress in the synthesis of 1D inorganic nanostructures by using suitable templates. A brief survey on the templating method based on the organic templates and porous membrane is firstly given. Then, the article is focused on recent emerging synthetic strategies by templating against the pre-existing 1D nanostructures using different physical and chemical transformation techniques, including epitaxial growth, nonepitaxial growth, direct chemical transformation, solid-state interfacial diffusion reaction, and so on. The important reactivity role of the 1D nanostructures will be emphasized in such transformation process. Finally, we conclude this paper with some perspectives and outlook on this research topic.

Nonspherical noble metal nanoparticles: colloid-chemical synthesis and morphology control

Metal nanoparticles have been the subject of widespread research over the past two decades. In recent years, noble metals have been the focus of numerous studies involving synthesis, characterization, and applications. Synthesis of an impressive range of noble metal nanoparticles with varied morphologies has been reported. Researchers have made a great progress in learning how to engineer materials on a nanometer length scale that has led to the understanding of the fundamental size- and shape-dependent properties of matter and to devising of new applications. In this article, we review the recent progress in the colloid-chemical synthesis of nonspherical nanoparticles of a few important noble metals (mainly Ag, Au, Pd, and Pt), highlighting the factors that influence the particle morphology and discussing the mechanisms behind the nonspherical shape evolution. The article attempts to present a thorough discussion of the basic principles as well as state-of-the-art morphology control in noble metal nanoparticles.

Cold welding of ultrathin gold nanowires

The welding of metals at the nanoscale is likely to have an important role in the bottom-up fabrication of electrical and mechanical nanodevices. Existing welding techniques use local heating, requiring precise control of the heating mechanism and introducing the possibility of damage. The welding of metals without heating (or cold welding) has been demonstrated, but only at macroscopic length scales and under large applied pressures. Here, we demonstrate that single-crystalline gold nanowires with diameters between 3 and 10 nm can be cold-welded together within seconds by mechanical contact alone, and under relatively low applied pressures. High-resolution transmission electron microscopy and in situ measurements reveal that the welds are nearly perfect, with the same crystal orientation, strength and electrical conductivity as the rest of the nanowire. The high quality of the welds is attributed to the nanoscale sample dimensions, oriented-attachment mechanisms and mechanically assisted fast surface-atom diffusion. Welds are also demonstrated between gold and silver, and silver and silver, indicating that the technique may be generally applicable.

Generalized Synthesis of Metal Phosphide Nanorods via Thermal Decomposition of Continuously Delivered Metal−Phosphine Complexes Using a Syringe Pump

We synthesized uniform-sized nanorods of transition metal phosphides from the thermal decomposition of continuously delivered metal-phosphine complexes using a syringe pump. MnP nanorods with dimensions of 8 nm x 16 nm and 6 nm x 22 nm sized were synthesized by the thermal decomposition of Mn-TOP complex, which was prepared from the reaction of Mn(2)(CO)(10) and tri-n-octylphosphine (TOP), using a syringe pump with constant injection rates of 10 and 20 mL/h, respectively. When Co-TOP complex, which was prepared from the reaction of cobalt acetylacetonate and TOP, was reacted in a mixture solvent composed of octyl ether and hexadecylamine at 300 degrees C using a syringe pump, uniform 2.5 nm x 20 nm sized Co(2)P nanorods were generated. When cobaltocene was employed as a precursor, uniform Co(2)P nanorods with 5 nm x 15 nm were obtained. When Fe-TOP complex was added to trioctylphosphine oxide (TOPO) at 360 degrees C using a syringe pump and then allowed to age at 360 degrees C for 30 min, uniform-sized FeP nanorods with an average dimension of 12 nm x 500 nm were produced. Nickel phosphide (Ni(2)P) nanorods with 4 nm x 8 nm were synthesized successfully by thermally decomposing the Ni-TOP complex, which was synthesized by reacting acetylacetonate [Ni(acac)(2)] and TOP. We measured the magnetic properties of these nanorods, and some of the nanorods exhibited different magnetic characteristics compared to the bulk counterparts.

Electrodeposition of Noble Metal Nanoparticles on Carbon Nanotubes

Noble metal nanoparticles can be electrodeposited on carbon nanotubes under potential control. The nanotube sidewalls serve both as the electrodeposition template and as the wire electrically connecting the deposited nanoparticles.

Some recent developments in the chemical synthesis of inorganic nanotubes

Inorganic nanotubes have been a subject of intensive research in the past decade. We recently developed a number of synthetic strategies for generating nanotubes from inorganic materials that do not have a layered structure. It is the intention of this contribution to provide a brief account of these research activities.

Seedless growth of free-standing copper nanowires by chemical vapor deposition

Free-standing copper nanowires were synthesized by a chemical vapor deposition process at low substrate temperatures using Cu(etac)[P(OEt)3]2 as a precursor. The process requires neither templates nor catalysts to produce copper nanowires of 70-100 nm in diameter, which exhibited high purity and crystallinity with [111] orientation. The grain structures of the films deposited from a series of Cu(I) alkyl 3-oxobutanoate complexes indicated that the high precursor stability was responsible for the columnar growth of the grains, which was evolved to the nanowires eventually.

Hollow Nanostructures of Platinum with Controllable Dimensions Can Be Synthesized by Templating Against Selenium Nanowires and Colloids

Hollow nanostructures of platinum have been synthesized by reducing PtCl2 with alcohol in the presence of selenium nanowires or colloids. The Se template could be removed by soaking the resultant Se@Pt nanostructures in hydrazine or by heating them to 200-250 degrees C. The size and wall thickness of the polycrystalline hollow nanostructures could be controlled by varying the template, reaction time, and the concentration of PtCl2.

Spontaneous reduction of metal ions on the sidewalls of carbon nanotubes

Nanotube/nanoparticle hybrid structures are prepared by forming Au and Pt nanoparticles on the sidewalls of single-walled carbon nanotubes. Reducing agent or catalyst-free electroless deposition, which purely utilizes the redox potential difference between Au3+, Pt2+, and the carbon nanotube, is the main driving force for this reaction. It is also shown that carbon nanotubes act as a template for wire-like metal structures. The successful formation of the hybrid structures is monitored by atomic force microscopy (AFM) and electrical measurements.