Cu(I) Luminescence from the Tetranuclear Cu4S4 Cofactor of a Synthetic 4-Helix Bundle

Inducing α-Helicity in Peptides by Silver Coordination to Cysteine

Short peptide sequences consisting of two cysteine residues separated by three other amino acids display complete change from random coil to α-helical secondary structure in response to addition of Ag+ ions. The folded CXXXC/Ag+ complex involves formation of multinuclear Ag+ species and is stable in a wide pH range from below 3 to above 8. The complex is stable through reversed-phase HPLC separation as well as towards a physiological level of chloride ions, based on far-UV circular dichroism spectroscopy. In electrospray MS under acidic conditions a peptide dimer with four Ag+ ions bound was observed, and modelling based on potentiometric experiments supported this to be the dominating complex at neutral pH together with a peptide dimer with 3 Ag+ and one proton at lower pH. The complex was demonstrated to work as a N-terminal nucleation site for inducing α-helicity into longer peptides. This type of silver-mediated peptide assembly and folding may be of more general use for stabilizing not only peptide folding but also for controlling oligomerization even under acidic conditions.

Differences in heavy metal binding to cysteine-containing coiled-coil peptides

One third of all structurally characterised proteins contain a metal; however, the interplay between metal-binding and peptide/protein folding has yet to be fully elucidated. To better understand how metal binding affects peptide folding, a range of metals should be studied within a specific scaffold. To this end, we modified a histidine-containing coiled-coil peptide to create a cysteine-containing scaffold, named CX3C, which was designed to bind heavy metal ions. In addition, we generated a peptide named CX2C, which contains a binding site more commonly found in natural proteins. Using a combination of analytical techniques including circular dichroism (CD) spectroscopy, UV-Vis spectroscopy and size-exclusion chromatography coupled to multi-angle light scattering (SEC-MALS), we examined the differences in the metal-binding properties of the two peptides. Both peptides are largely unfolded in the apo state due to the disruption of the hydrophobic core by inclusion of the polar cysteine residues. However, this unfolding is overcome by the addition of Cd(II), Pb(II) and Hg(II), and helical assemblies are formed. Both peptides have differing affinities for these metal ions, a fact likely attributed to the differing sizes of the ions. We also show that the oligomerisation state of the peptide complexes and the coordination geometries of the metal ions differ between the two peptide scaffolds. These findings highlight that subtle changes in the primary structure of a peptide can have considerable implications for metal binding.

Design of artificial metalloenzymes with multiple inorganic elements: The more the merrier

A large fraction of metalloenzymes harbors multiple metal-centers that are electronically and/or functionally arranged within their proteinaceous environments. To explore the orchestration of inorganic and biochemical components and to develop bioinorganic catalysts and materials, we have described selected examples of artificial metalloproteins having multiple metallocofactors that were grouped depending on their initial protein scaffolds, the nature of introduced inorganic moieties, and the method used to propagate the number of metal ions within a protein. They demonstrated that diverse inorganic moieties can be selectively grafted and modulated in protein environments, providing a retrosynthetic bottom-up approach in the design of versatile and proficient biocatalysts and biomimetic model systems to explore fundamental questions in bioinorganic chemistry.

Allosteric cooperation in a de novo-designed two-domain protein

We describe the de novo design of an allosterically regulated protein, which comprises two tightly coupled domains. One domain is based on the DF (Due Ferri in Italian or two-iron in English) family of de novo proteins, which have a diiron cofactor that catalyzes a phenol oxidase reaction, while the second domain is based on PS1 (Porphyrin-binding Sequence), which binds a synthetic Zn-porphyrin (ZnP). The binding of ZnP to the original PS1 protein induces changes in structure and dynamics, which we expected to influence the catalytic rate of a fused DF domain when appropriately coupled. Both DF and PS1 are four-helix bundles, but they have distinct bundle architectures. To achieve tight coupling between the domains, they were connected by four helical linkers using a computational method to discover the most designable connections capable of spanning the two architectures. The resulting protein, DFP1 (Due Ferri Porphyrin), bound the two cofactors in the expected manner. The crystal structure of fully reconstituted DFP1 was also in excellent agreement with the design, and it showed the ZnP cofactor bound over 12 Å from the dimetal center. Next, a substrate-binding cleft leading to the diiron center was introduced into DFP1. The resulting protein acts as an allosterically modulated phenol oxidase. Its Michaelis-Menten parameters were strongly affected by the binding of ZnP, resulting in a fourfold tighter K _m and a 7-fold decrease in k _cat These studies establish the feasibility of designing allosterically regulated catalytic proteins, entirely from scratch.

Structural Diversity of Copper(I) Cluster-Based Coordination Polymers with Pyrazine-2-thiol Ligand

Six novel copper(I) cluster-based coordination polymers (CPs) [Cu₉(pzt)₇Cl₂]_n (1), [Cu₂(pzt)Cl]_n (2), [Cu₄(pzt)₃Br]_n (3), [Cu(pzt)]_n (4), [Cu₄(pzt)₃I]_n (5), and [Cu₇(pzt)₆I]_n (6) were solvothermally synthesized using Hpzt (Hpzt = pyrazine-2-thiol) ligand and well-characterized by elemental analysis, infrared (IR) spectroscopy, powder X-ray diffraction (PXRD), and single-crystal X-ray diffraction (SCXRD). Six CPs exhibit either 2D (4 and 6) or 3D (1-3, and 5) network based on diverse multinuclear {Cu_xS_y} clusters. The structural evolutions of 1-6 are greatly influenced by types of metal halides and the ligand-to-metal molar ratio used in the reaction. Among them, compound 1 displays interesting temperature-dependent photoluminescence arising from triplet cluster-centered (³CC) excited state from the cluster metal core. Compounds 1-6 also exhibit photocurrent responses upon visible-light illumination (λ = 420 nm) in the order 6 > 5 > 3 > 1 > 4 > 2. This work not only shows the structural diversity of {Cu_xS_y} clusters-based CPs but also provides an interesting insight into structural modulation using crystal engineering concept.

Rational Design of Artificial Metalloproteins and Metalloenzymes with Metal Clusters

Metalloproteins and metalloenzymes play important roles in biological systems by using the limited metal ions, complexes, and clusters that are associated with the protein matrix. The design of artificial metalloproteins and metalloenzymes not only reveals the structure and function relationship of natural proteins, but also enables the synthesis of artificial proteins and enzymes with improved properties and functions. Acknowledging the progress in rational design from single to multiple active sites, this review focuses on recent achievements in the design of artificial metalloproteins and metalloenzymes with metal clusters, including zinc clusters, cadmium clusters, iron-sulfur clusters, and copper-sulfur clusters, as well as noble metal clusters and others. These metal clusters were designed in both native and de novo protein scaffolds for structural roles, electron transfer, or catalysis. Some synthetic metal clusters as functional models of native enzymes are also discussed. These achievements provide valuable insights for deep understanding of the natural proteins and enzymes, and practical clues for the further design of artificial enzymes with functions comparable or even beyond those of natural counterparts.

Selective coordination of three transition metal ions within a coiled-coil peptide scaffold

Three peptide chains selectively coordinate specific transition metal ions, triggering folding and the formation of a novel metallopeptide complex.

Designing peptides that fold and assemble in response to metal ions tests our understanding of how peptide folding and metal binding influence one another. Here, histidine residues are introduced into the hydrophobic core of a coiled-coil trimer, generating a peptide that self-assembles upon the addition of metal ions. HisAD, the resulting peptide, is unstructured in the absence of metal and folds selectively to form an α-helical construct upon complexation with Cu(ii) and Ni(ii) but not Co(ii) or Zn(ii). The structure, and metal-binding ability, of HisAD is probed using a combination of circular dichroism (CD) spectroscopy, analytical ultracentrifugation (AUC), nuclear magnetic resonance (NMR) spectroscopy and X-ray crystallography. These show the peptide is trimeric and binds to both Cu(ii) and Ni(ii) in a 1 : 1 ratio with the histidine residues involved in the metal coordination, as designed. The X-ray crystal structure of the HisAD-Cu(ii) complex reveals the trimeric HisAD peptide coordinates three Cu(ii) ions; this is the first example of such a structure. Additionally, HisAD demonstrates an unprecedented discrimination between transition metal ions, the basis of which is likely to be related to the stability of the peptide-metal complexes formed.

Recent advances in the synthesis and application of copper nanomaterials based on various DNA scaffolds

Fluorescent copper nanomaterials (CuNMs), including copper nanoparticles (CuNPs) and copper nanoclusters (CuNCs), become more and more popular with the abundant raw materials and low cost. A wide range of applications has been explored due to their fascinating properties such as low toxicity, remarkable water solubility, facile synthesis, large Stokes shifts, and good biocompatibility. As a kind of genetic material, DNA exhibits its molecular recognition function and diversity. The marriage between CuNMs and DNA endows DNA-templated CuNMs (DNA-CuNMs) with unique properties such as fluorescence, electrochemiluminescence and catalytic features. In this review, we summarize the synthesis and recent applications of DNA-CuNMs. Fluorescent CuNMs can be grown on various DNA scaffolds with special sequence design. T base plays an important role in the formation of CuNMs on DNA templates. These fluorescent DNA-CuNMs hold great prospect in logic gate construction, staining and biosensing of DNAs and RNAs, ions, proteins and enzymes, small molecules and so on.

De Novo Design of Tetranuclear Transition Metal Clusters Stabilized by Hydrogen-Bonded Networks in Helical Bundles

De novo design provides an attractive approach to test the mechanism by which metalloproteins define the geometry and reactivity of their metal ion cofactors. While there has been considerable progress in designing proteins that bind transition metal ions including iron-sulfur clusters, the design of tetranuclear clusters with oxygen-rich environments has not been accomplished. Here, we describe the design of tetranuclear clusters, consisting of four Zn2+ and four carboxylate oxygens situated at the vertices of a distorted cube-like structure. The tetra-Zn2+ clusters are bound at a buried site within a four-helix bundle, with each helix donating a single carboxylate (Glu or Asp) and imidazole (His) ligand, as well as second- and third-shell ligands. Overall, the designed site consists of four Zn2+ and 16 polar side chains in a fully connected hydrogen-bonded network. The designed proteins have apolar cores at the top and bottom of the bundle, which drive the assembly of the liganding residues near the center of the bundle. The steric bulk of the apolar residues surrounding the binding site was varied to determine how subtle changes in helix-helix packing affect the binding site. The crystal structures of two of four proteins synthesized were in good agreement with the overall design; both formed a distorted cuboidal site stabilized by flanking second- and third-shell interactions that stabilize the primary ligands. A third structure bound a single Zn2+ in an unanticipated geometry, and the fourth bound multiple Zn2+ at multiple sites at partial occupancy. The metal-binding and conformational properties of the helical bundles in solution, probed by circular dichroism spectroscopy, analytical ultracentrifugation, and NMR, were consistent with the crystal structures.

One-Pot Aqueous Synthesis of Nucleoside-Templated Fluorescent Copper Nanoclusters and Their Application for Discrimination of Nucleosides

A facile, one-pot synthetic method has been proposed to prepare water-soluble fluorescent copper nanoclusters (CuNCs) templated by nucleosides. The nucleoside-templated fluorescent CuNCs were further characterized by using various analytical techniques, such as transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and fluorescence spectroscopy. The role of various reactants such as ascorbic acid, nucleoside, and citrate buffer in the synthesis process of fluorescent CuNCs was explored. The results showed that nucleoside and ascorbic acid were very likey to respectively act as a stabilizer and a reductant to form nanoclusters, and citrate buffer acted as both pH regulator solution and a reducing agent. The fluorescence spectra of various nucleoside-templated CuNCs were finally combined with multivariate chemometrics analysis for discrimination of different nucleosides.

A four-helix bundle stores copper for methane oxidation

Methane-oxidizing bacteria (methanotrophs) require large quantities of copper for the membrane-bound (particulate) methane monooxygenase. Certain methanotrophs are also able to switch to using the iron-containing soluble methane monooxygenase to catalyse methane oxidation, with this switchover regulated by copper. Methane monooxygenases are nature's primary biological mechanism for suppressing atmospheric levels of methane, a potent greenhouse gas. Furthermore, methanotrophs and methane monooxygenases have enormous potential in bioremediation and for biotransformations producing bulk and fine chemicals, and in bioenergy, particularly considering increased methane availability from renewable sources and hydraulic fracturing of shale rock. Here we discover and characterize a novel copper storage protein (Csp1) from the methanotroph Methylosinus trichosporium OB3b that is exported from the cytosol, and stores copper for particulate methane monooxygenase. Csp1 is a tetramer of four-helix bundles with each monomer binding up to 13 Cu(I) ions in a previously unseen manner via mainly Cys residues that point into the core of the bundle. Csp1 is the first example of a protein that stores a metal within an established protein-folding motif. This work provides a detailed insight into how methanotrophs accumulate copper for the oxidation of methane. Understanding this process is essential if the wide-ranging biotechnological applications of methanotrophs are to be realized. Cytosolic homologues of Csp1 are present in diverse bacteria, thus challenging the dogma that such organisms do not use copper in this location.

Artificial Diiron Enzymes with a De Novo Designed Four-Helix Bundle Structure

A single polypeptide chain may provide an astronomical number of conformers. Nature selected only a trivial number of them through evolution, composing an alphabet of scaffolds, that can afford the complete set of chemical reactions needed to support life. These structural templates are so stable that they allow several mutations without disruption of the global folding, even having the ability to bind several exogenous cofactors. With this perspective, metal cofactors play a crucial role in the regulation and catalysis of several processes. Nature is able to modulate the chemistry of metals, adopting only a few ligands and slightly different geometries. Several scaffolds and metal-binding motifs are representing the focus of intense interest in the literature. This review discusses the widespread four-helix bundle fold, adopted as a scaffold for metal binding sites in the context of de novo protein design to obtain basic biochemical components for biosensing or catalysis. In particular, we describe the rational refinement of structure/function in diiron-oxo protein models from the due ferri (DF) family. The DF proteins were developed by us through an iterative process of design and rigorous characterization, which has allowed a shift from structural to functional models. The examples reported herein demonstrate the importance of the synergic application of de novo design methods as well as spectroscopic and structural characterization to optimize the catalytic performance of artificial enzymes.

Interfacial metal coordination in engineered protein and peptide assemblies

Metal ions are frequently found in natural protein-protein interfaces, where they stabilize quaternary or supramolecular protein structures, mediate transient protein-protein interactions, and serve as catalytic centers. Paralleling these natural roles, coordination chemistry of metal ions is being increasingly utilized in creative ways toward engineering and controlling the assembly of functional supramolecular peptide and protein architectures. Here we provide a brief overview of this emerging branch of metalloprotein/peptide engineering and highlight a few select examples from the recent literature that best capture the diversity and future potential of approaches that are being developed.

Designing functional metalloproteins: from structural to catalytic metal sites

Metalloenzymes efficiently catalyze some of the most important and difficult reactions in nature. For many years, coordination chemists have effectively used small molecule models to understand these systems. More recently, protein design has been shown to be an effective approach for mimicking metal coordination environments. Since the first designed proteins were reported, much success has been seen for incorporating metal sites into proteins and attaining the desired coordination environment but until recently, this has been with a lack of significant catalytic activity. Now there are examples of designed metalloproteins that, although not yet reaching the activity of native enzymes, are considerably closer. In this review, we highlight work leading up to the design of a small metalloprotein containing two metal sites, one for structural stability (HgS3) and the other a separate catalytic zinc site to mimic carbonic anhydrase activity (ZnN3O). The first section will describe previous studies that allowed for a high affinity thiolate site that binds heavy metals in a way that stabilizes three-stranded coiled coils. The second section will examine ways of preparing histidine rich environments that lead to metal based hydrolytic catalysts. We will also discuss other recent examples of the design of structural metal sites and functional metalloenzymes. Our work demonstrates that attaining the proper first coordination geometry of a metal site can lead to a significant fraction of catalytic activity, apparently independent of the type of secondary structure of the surrounding protein environment. We are now in a position to begin to meet the challenge of building a metalloenzyme systematically from the bottom-up by engineering and analyzing interactions directly around the metal site and beyond.

Natural and artificial proteins containing cadmium

This chapter describes an approach using designed proteins to understand the structure, spectroscopy, and dynamics of proteins that bind Cd(II). We will show that three-stranded coiled coils (3SCCs) based on the parent peptides TRI (Ac-G(LKALEEK)(4)G-NH(2)) or GRAND (Ac-G(LKALEEK)(5)G-NH(2)) have been essential for understanding how Cd(II) binds to thiolate-rich environments in proteins. Examples are given correlating physical properties such as the binding constants or deprotonation constants relating to structure. We present a scale that relates (113)Cd NMR chemical shifts to structures extracted from (111m)Cd PAC experiments. In addition, we describe motional processes that help transport from the helical interface of proteins into the hydrophobic interior of helical bundles. These studies help clarify the chemistry of Cd(II) in relation to metal-regulated gene expression and detoxification.

Controlling and fine tuning the physical properties of two identical metal coordination sites in de novo designed three stranded coiled coil peptides

Herein we report how de novo designed peptides can be used to investigate whether the position of a metal site along a linear sequence that folds into a three-stranded α-helical coiled coil defines the physical properties of Cd(II) ions in either CdS(3) or CdS(3)O (O-being an exogenous water molecule) coordination environments. Peptides are presented that bind Cd(II) into two identical coordination sites that are located at different topological positions at the interior of these constructs. The peptide GRANDL16PenL19IL23PenL26I binds two Cd(II) as trigonal planar 3-coordinate CdS(3) structures whereas GRANDL12AL16CL26AL30C sequesters two Cd(II) as pseudotetrahedral 4-coordinate CdS(3)O structures. We demonstrate how for the first peptide, having a more rigid structure, the location of the identical binding sites along the linear sequence does not affect the physical properties of the two bound Cd(II). However, the sites are not completely independent as Cd(II) bound to one of the sites ((113)Cd NMR chemical shift of 681 ppm) is perturbed by the metalation state (apo or [Cd(pep)(Hpep)(2)](+) or [Cd(pep)(3)](-)) of the second center ((113)Cd NMR chemical shift of 686 ppm). GRANDL12AL16CL26AL30C shows a completely different behavior. The physical properties of the two bound Cd(II) ions indeed depend on the position of the metal center, having pK(a2) values for the equilibrium [Cd(pep)(Hpep)(2)](+) → [Cd(pep)(3)](-) + 2H(+) (corresponding to deprotonation and coordination of cysteine thiols) that range from 9.9 to 13.9. In addition, the L26AL30C site shows dynamic behavior, which is not observed for the L12AL16C site. These results indicate that for these systems one cannot simply assign a "4-coordinate structure" and assume certain physical properties for that site since important factors such as packing of the adjacent Leu, size of the intended cavity (endo vs exo) and location of the metal site play crucial roles in determining the final properties of the bound Cd(II).

Nanometer to millimeter scale peptide-porphyrin materials

AQ-Pal14 is a 30-residue polypeptide that was designed to form an α-helical coiled coil that contains a metal-binding 4-pyridylalanine residue on its solvent-exposed surface. However, characterization of this peptide shows that it exists as a three-stranded coiled coil, not a two-stranded one as predicted from its design. Reaction with cobalt(III) protoporphyrin IX (Co-PPIX) produces a six-coordinate Co-PPIX(AQ-Pal14)(2) species that creates two coiled-coil oligomerization domains coordinated to opposite faces of the porphyrin ring. It is found that this species undergoes a buffer-dependent self-assembly process: nanometer-scale globular materials were formed when these components were reacted in unbuffered H(2)O, while millimeter-scale, rod-like materials were prepared when the reaction was performed in phosphate buffer (20 mM, pH 7). It is suggested that assembly of the globular material is dictated by the conformational properties of the coiled-coil forming AQ-Pal14 peptide, whereas that of the rod-like material involves interactions between Co-PPIX and phosphate ion.

Time resolved spectroscopy of inorganic complexes

Time resolved spectroscopy has revolutionised our understanding of photochemical and photophysical reactions of inorganic complexes. In this review, we briefly describe the most common time resolved optical spectroscopic methods applied to inorganic complexes and outline some examples and highlights from the recent literature. The review is not intended to be exhaustive, but highlights key recent papers from coordination chemistry, supramolecular chemistry, carbonyl chemistry and bioinorganic chemistry, as well as, recent insights from ultrafast spectroscopy into the photophysics of important prototypes such as [Ru(bpy)3]2+ and [Cu(dmp)2]+. A brief perspective is then presented which discusses areas where time resolved spectroscopy of inorganic complexes could play a particularly important role in the next few years.

The effect of the side chain length of Asp and Glu on coordination structure of Cu(2+) in a de novo designed protein

Metal ions in proteins are important not only for the formation of the proper structures but also for various biological activities. For biological functions such as hydrolysis and oxidation, metal ions often adopt unusual coordination structures. We constructed a stable scaffold for metal binding to create distorted metal coordination structures. A stable four stranded alpha-helical coiled-coil structure was used as the scaffold, and the metal binding site was in the cavity created at the center of the structure. Two His residues and one Asp or Glu residue were used to coordinate the metal ions, AM2D and AM2E, respectively. Cu(2+) bound to AM2D with an equatorial planar coordination structure with two His, one Asp, and H(2)O as detected by electron spin resonance and UV spectral analyzes. On the other hand, Cu(2+) had a slightly distorted square planar structure when it bound two His and Glu in AM2E, due to the longer side-chain of the Glu residue as compared to the Asp residue. Computational analysis also supported the distorted coordination structure of Cu(2+) in AM2E. This construct should be useful to create various coordinations of metal ions for catalytic functions.

Control of protein oligomerization symmetry by metal coordination: C2 and C3 symmetrical assemblies through Cu(II) and Ni(II) coordination

We describe the metal-dependent self-assembly of symmetrical protein homooligomers from protein building blocks that feature appropriately engineered metal-chelating motifs on their surfaces. Crystallographic studies indicate that the same four-helix-bundle protein construct, MBPC-1, can self-assemble into C(2) and C(3) symmetrical assemblies dictated by Cu(II) and Ni(II) coordination, respectively. The symmetry inherent in metal coordination can thus be directly applied to biological self-assembly.

Design of thiolate rich metal binding sites within a peptidic framework

A de novo protein design strategy provides a powerful tool to elucidate how heavy metals interact with proteins.Cysteine derivatives of the TRI peptide family (Ac-G(LKALEEK)4G-NH2) have been shown to bind heavy metals in an unusual trigonal geometry. Our present objective was to design binding sites in R-helical scaffolds that are able to form higher coordination number complexes with Cd(II) and Hg(II). Herein, we evaluate the binding of Cd(II) and Hg(II) to double cysteine substituted TRI peptides lacking intervening leucines between sulfurs in the heptads. We compare a -Cysd-X-X-X-Cysa- binding motif found in TRIL12CL16C to the more common -Cysa-X-X-Cysd- sequence of native proteins found in TRIL9CL12C. Compared to TRI, these substitutions destabilize the helical aggregates,leading to mixtures of two- and three-stranded bundles. The three-stranded coiled coils are stabilized by the addition of metals. TRIL9CL12C forms distorted tetrahedral complexes with both Cd(II) and Hg(II), as supported by UV-vis,CD, 113Cd NMR, 199Hg NMR and 111mCd PAC spectroscopy. Additionally, these signatures are very similar to those found for heavy metal substituted rubredoxin. These results suggest that in terms of Hg(II) binding, TRIL9CL12Ccan be considered as a good mimic of the metallochaperone HAH1, that has previously been shown to form protein dimers. TRIL12CL16C has limited ability to generate homoleptic tetrahedral complexes (Cd(SR)42-). These type of complexes were identified only for Hg(II). However, the spectroscopic signatures suggest a different geometry around the metal ion, demonstrating that effective metal sequestration into the hydrophobic interior of the bundle requires more than simply adding two sulfur residues in adjacent layers of the peptide core. Thus, proper design of metal binding sites must also consider the orientation of cysteine sidechains in a vs d positions of the heptads.

Structure and Cu(I)-binding properties of the N-terminal soluble domains of Bacillus subtilis CopA

CopA, a P-type ATPase from Bacillus subtilis, plays a major role in the resistance of the cell to copper by effecting the export of the metal across the cytoplasmic membrane. The N-terminus of the protein features two soluble domains (a and b), that each contain a Cu(I)-binding motif, MTCAAC. We have generated a stable form of the wild-type two-domain protein, CopAab, and determined its solution structure. This was found to be similar to that reported previously for a higher stability S46V variant, with minor differences mostly confined to the Ser(46)-containing beta3-strand of domain a. Chemical-shift analysis demonstrated that the two Cu(I)-binding motifs, located at different ends of the protein molecule, are both able to participate in Cu(I) binding and that Cu(I) is in rapid exchange between protein molecules. Surprisingly, UV-visible and fluorescence spectroscopy indicate very different modes of Cu(I) binding below and above a level of 1 Cu(I) per protein, consistent with a major structural change occurring above 1 Cu(I) per CopAab. Analytical equilibrium centrifugation and gel filtration results show that this is a result of Cu(I)-mediated dimerization of the protein. The resulting species is highly luminescent, indicating the presence of a solvent-shielded Cu(I) cluster.

Self-assembly of luminescent Sn(IV)/Cu/S clusters using metal thiolates as metalloligands

Through the use of (Bu4N)2[Sn3S4(edt)3] (edt=SCH2CH2S(2-)) and Sn(SPh)4 as metalloligands, three neutral compounds have been obtained: [(Ph3P) 2Cu] 2SnS(edt)(2).2CH2Cl2.H2O (1a), [(Ph3P) 2Cu]2SnS(edt)2.2DMF.H2O (1b), and [(Ph3P)Cu] 2Sn(SPh)(6).3H 2O (2). Single-crystal X-ray diffraction studies revealed that compounds 1a and 1b contain the same neutral butterfly-like [(Ph3P)2Cu]2SnS(edt)2 cluster, which consists of one central SnS 5 dreich trigonal bipyramid sharing one vertex and two sides with two slightly distorted CuS 2P2 tetrahedrons. Compound 2 has a linear [(Ph3P)Cu]2Sn(SPh)6 cluster that is composed of a central distorted SnS 6 octahedron sharing two opposite planes with two slightly distorted CuS 3P tetrahedrons. Compound 1a exhibited an emission at 568 nm (tau=12.86 micros) in the solid state, while in CH 2Cl 2 solution, 1a exhibited a green emission at 534 nm (tau=4.75 micros). Compound 2 showed an intense red emission at 696 nm (tau=3.64 micros) upon excitation at 307 nm in the solid state.

Metal-Mediated Peptide Assembly: Use of Metal Coordination to Change the Oligomerization State of an α-Helical Coiled-Coil

Metal coordination is used to alter the oligomerization state of a designed peptide structure. The 30-residue polypeptide AQ-Pal14Pal21contains two metal-binding 4-pyridylalanine (Pal) residues on its solvent-exposed surface and exists as a very stable two-stranded alpha-helical coiled-coil. Upon the addition of Pt(en)(NO3)2, a significant conformational change to a metal-bridged, four-helix bundle is seen.

Identifying important structural characteristics of arsenic resistance proteins by using designed three-stranded coiled coils

Arsenic, a contaminant of water supplies worldwide, is one of the most toxic inorganic ions. Despite arsenic's health impact, there is relatively little structural detail known about its interactions with proteins. Bacteria such as Escherichia coli have evolved arsenic resistance using the Ars operon that is regulated by ArsR, a repressor protein that dissociates from DNA when As(III) binds. This protein undergoes a critical conformational change upon binding As(III) with three cysteine residues. Unfortunately, structures of ArsR with or without As(III) have not been reported. Alternatively, de novo designed peptides can bind As(III) in an endo configuration within a thiolate-rich environment consistent with that proposed for both ArsR and ArsD. We report the structure of the As(III) complex of Coil Ser L9C to a 1.8-A resolution, providing x-ray characterization of As(III) in a Tris thiolate protein environment and allowing a structural basis by which to understand arsenated ArsR.

Incorporating electron-transfer functionality into synthetic metalloproteins from the bottom-up

The alpha-helical coiled-coil motif serves as a robust scaffold for incorporating electron-transfer (ET) functionality into synthetic metalloproteins. These structures consist of a supercoiling of two or more aplha helices that are formed by the self-assembly of individual polypeptide chains whose sequences contain a repeating pattern of hydrophobic and hydrophilic residues. Early work from our group attached abiotic Ru-based redox sites to the most surface-exposed positions of two stranded coiled-coils and used electron-pulse radiolysis to study both intra- and intermolecular ET reactions in these systems. Later work used smaller metallopeptides to investigate the effects of conformational gating within electrostatic peptide-protein complexes. We have recently designed the C16C19-GGY peptide, which contains Cys residues located at both the "a" and "d" positions of its third heptad repeat in order to construct a nativelike metal-binding domain within its hydrophobic core. It was shown that the binding of both Cd(II) and Cu(I) ions induces the peptide to undergo a conformational change from a disordered random coil to a metal-bridged coiled-coil. However, whereas the Cd(II)-protein exists as a two-stranded coiled-coil, the Cu(I) derivative exists as a four-stranded coiled-coil. Upon the incorporation of other metal ions, metal-bridged peptide dimers, tetramers, and hexamers are formed. The Cu(I)-protein is of particular interest because it exhibits a long-lived (microsecond) room-temperature luminescence at 600 nm. The luminophore in this protein is thought to be a multinuclear CuI4Cys4(N/O)4 cage complex, which can be quenched by exogenous electron acceptors in solution, as shown by emission-lifetime and transient-absorption experiments. It is anticipated that further investigation into these systems will contribute to the expanding effort of bioinorganic chemists to prepare new kinds of functionally active synthetic metalloproteins.