Preparation of Highly Dispersed Core/Shell-type Titania Nanocapsules Containing a Single Ag Nanoparticle

Properties and Applications of Highly Stable Vesicles Formed by Nanoarchitectonics of Amphiphilic Molecules

Vesicles (liposomes and niosomes) are bilayer membranous capsules composed of amphiphilic molecules having aqueous phase in their interior and can encapsulate drug ingredients to act as drug delivery systems, a bio-membrane model, and so on. Vesicles also find their applications in cosmetics and foods industries since they can not only entrap water-soluble substances in their core, but also solubilize oily substances in the bilayer membrane. Almost half a century has passed since the discovery of vesicles by Bangham, and research on their basic properties and applications has been gaining momentum once again. In this article, the preparation and properties of vesicles (liposomes, niosomes) with excellent dispersion stability, especially formed in mixtures of amphiphilic molecules, are reported. Furthermore, the preparation of nano-sized silica hollow particles using vesicles as a structure-directing agent and their application to anti-reflection film are also described.

Synthetic Approaches to Colloidal Nanocrystal Heterostructures Based on Metal and Metal-Oxide Materials

Composite inorganic nanoarchitectures, based on combinations of distinct materials, represent advanced solid-state constructs, where coexistence and synergistic interactions among nonhomologous optical, magnetic, chemical, and catalytic properties lay a basis for the engineering of enhanced or even unconventional functionalities. Such systems thus hold relevance for both theoretical and applied nanotechnology-based research in diverse areas, spanning optics, electronics, energy management, (photo)catalysis, biomedicine, and environmental remediation. Wet-chemical colloidal synthetic techniques have now been refined to the point of allowing the fabrication of solution free-standing and easily processable multicomponent nanocrystals with sophisticated modular heterostructure, built upon a programmed spatial distribution of the crystal phase, composition, and anchored surface moieties. Such last-generation breeds of nanocrystals are thus composed of nanoscale domains of different materials, assembled controllably into core/shell or heteromer-type configurations through bonding epitaxial heterojunctions. This review offers a critical overview of achievements made in the design and synthetic elaboration of colloidal nanocrystal heterostructures based on diverse associations of transition metals (with emphasis on plasmonic metals) and transition-metal oxides. Synthetic strategies, all leveraging on the basic seed-mediated approach, are described and discussed with reference to the most credited mechanisms underpinning regioselective heteroepitaxial deposition. The unique properties and advanced applications allowed by such brand-new nanomaterials are also mentioned.

Rational design of tandem catalysts using a core-shell structure approach

A facile and rational approach to synthesize bimetallic heterogeneous tandem catalysts is presented. Using core-shell structures, it is possible to create spatially controlled ensembles of different nanoparticles and investigate coupled chemocatalytic reactions. The CO2 hydrogenation to methane and light olefins was tested, achieving a tandem process successfully.

A Review on the Use of Hybrid Nanofluid in a Solar Flat Plate and Parabolic Trough Collectors and Its Enhanced Collector Thermal Efficiency

Energy demand is high in all parts of the world, mostly in all industrial sectors. To meet the energy demand the fossil fuel is the only way. Due to rapid industrial growth and use of fossil fuel result in global warming and environmental pollution. Moreover, the limited availability of the fossil fuels, it is necessary to depend on the renewable energy sources. Promising renewable energy in the world is solar energy, which is available largely on the earth surface. The solar energy can be converted into thermal energy in the solar flat plate collector. The collector thermal efficiency is purely depends on the working fluid used in it. Most of the studies revealed that replacing the working fluid with high thermal conductivity fluids called as nanofluids and hybrid nanofluids can improve the collector thermal efficiency. Few decades back studies have been conducted with nanofluids in solar collectors. Currently the researchers are working on solar collectors for further improvement of its efficiency using hybrid nanofluids. In this review paper, we will discuss about the synthesis of hybrid nanoparticles, hybrid nanofluids, characterization, thermophysical properties, and application of hybrid nanofluids in solar flat plate collector under natural and forced circulation of fluid. The research gap in the solar collector is also discussed in this article. This paper also explains about the heat transfer capabilities of hybrid nanofluids especially used solar collectors.

Dual Ag/Co cocatalyst synergism for the highly effective photocatalytic conversion of CO2 by H2O over Al-SrTiO3

Loading Ag and Co dual cocatalysts on Al-doped SrTiO₃ (AgCo/Al-SrTiO₃) led to a significantly improved CO-formation rate and extremely high selectivity toward CO evolution (99.8%) using H₂O as an electron donor when irradiated with light at wavelengths above 300 nm. Furthermore, the CO-formation rate over AgCo/Al-SrTiO₃ (52.7 μmol h⁻¹) was a dozen times higher than that over Ag/Al-SrTiO₃ (4.7 μmol h⁻¹). The apparent quantum efficiency for CO evolution over AgCo/Al-SrTiO₃ was about 0.03% when photoirradiated at a wavelength at 365 nm, with a CO-evolution selectivity of 98.6% (7.4 μmol h⁻¹). The Ag and Co cocatalysts were found to function as reduction and oxidation sites for promoting the generation of CO and O₂, respectively, on the Al-SrTiO₃ surface.

Deposition Ag and Co dual cocatalysts onto Al-SrTiO₃ significantly improves its activity for photoreduction of CO₂ by H₂O, with extremely high selectivity to CO evolution (99.8%), in which Ag and Co enable CO₂ reduction and H₂O oxidation, respectively.

Different cellulosic polymers for synthesizing silver nanoparticles with antioxidant and antibacterial activities

The use of cellulosic polymers as efficient reducing, coating agents, and stabilizers in the formulation of silver nanoparticles (AgNPs) with antioxidant and antibacterial activity was investigated. AgNPs were synthesized using different cellulosic polymers, polyethylene glycol, and without polymers using tri-sodium citrate, for comparison. The yield, morphology, size, charge, in vitro release of silver ion, and physical stability of the resulting AgNPs were evaluated. Their antioxidant activity was measured as a scavenging percentage compared with ascorbic acid, while their antibacterial activity was evaluated against different strains of bacteria. The amount of AgNPs inside bacterial cells was quantified using an ICP-OES spectrometer, and morphological examination of the bacteria was performed after AgNPs internalization. Cellulosic polymers generated physically stable AgNPs without any aggregation, which remained physically stable for 3 months at 25.0 ± 0.5 and 4.0 ± 0.5 °C. AgNPs formulated using ethylcellulose (EC) and hydroxypropyl methylcellulose (HPMC) had significant (p ≤ 0.05; ANOVA/Tukey) antibacterial activities and lower values of MIC compared to methylcellulose (MC), PEG, and AgNPs without a polymeric stabilizer. Significantly (p ≤ 0.05; ANOVA/Tukey) more AgNPs-EC and AgNPs-HPMC were internalized in Escherichia coli cells compared to other formulations. Thus, cellulosic polymers show promise as polymers for the formulation of AgNPs with antioxidant and antibacterial activities.

Core-Shell NaHoF4@TiO2 NPs: A Labeling Method to Trace Engineered Nanomaterials of Ubiquitous Elements in the Environment

Understanding the fate and behavior of nanoparticles (NPs) in the natural environment is important to assess their potential risk. Single particle inductively coupled plasma mass spectrometry (spICP-MS) allows for the detection of NPs at extremely low concentrations, but the high natural background of the constituents of many of the most widely utilized nanoscale materials makes accurate quantification of engineered particles challenging. Chemical doping, with a less naturally abundant element, is one approach to address this; however, certain materials with high natural abundance, such as TiO₂ NPs, are notoriously difficult to label and differentiate from natural NPs. Using the low abundance rare earth element Ho as a marker, Ho-bearing core -TiO₂ shell (NaHoF₄@TiO₂) NPs were designed to enable the quantification of engineered TiO₂ NPs in real environmental samples. The NaHoF₄@TiO₂ NPs were synthesized on a large scale (gram), at relatively low temperatures, using a sacrificial Al(OH)₃ template that confines the hydrolysis of TiF₄ within the space surrounding the NaHoF₄ NPs. The resulting NPs consist of a 60 nm NaHoF₄ core and a 5 nm anatase TiO₂ shell, as determined by TEM, STEM-EDX mapping, and spICP-MS. The NPs exhibit excellent detectability by spICP-MS at extremely low concentrations (down to 1 × 10^-3 ng/L) even in complex natural environments with high Ti background.

Functionalized core–shell Ag@TiO2 nanoparticles for enhanced Raman spectroscopy: a sensitive detection method for Cu(ii) ions

A shell-isolated nanoparticle enhanced surface Raman technique for detection of copper(ii).

Core-shell structured titanium dioxide nanomaterials for solar energy utilization

Because of its unmatched resource potential, solar energy utilization currently is one of the hottest research areas. Much effort has been devoted to developing advanced materials for converting solar energy into electricity, solar fuels, active chemicals, or heat. Among them, TiO2 nanomaterials have attracted much attention due to their unique properties such as low cost, nontoxicity, good stability and excellent optical and electrical properties. Great progress has been made, but research opportunities are still present for creating new nanostructured TiO2 materials. Core-shell structured nanomaterials are of great interest as they provide a platform to integrate multiple components into a functional system, showing improved or new physical and chemical properties, which are unavailable from the isolated components. Consequently, significant effort is underway to design, fabricate and evaluate core-shell structured TiO2 nanomaterials for solar energy utilization to overcome the remaining challenges, for example, insufficient light absorption and low quantum efficiency. This review strives to provide a comprehensive overview of major advances in the synthesis of core-shell structured TiO2 nanomaterials for solar energy utilization. This review starts from the general protocols to construct core-shell structured TiO2 nanomaterials, and then discusses their applications in photocatalysis, water splitting, photocatalytic CO2 reduction, solar cells and photothermal conversion. Finally, we conclude with an outlook section to offer some insights on the future directions and prospects of core-shell structured TiO2 nanomaterials and solar energy conversion.

Hazardous impacts of silver nanoparticles on mouse oocyte maturation and fertilization and fetal development through induction of apoptotic processes

Silver nanoparticles (AgNPs) are antibacterial materials widely used in numerous products and medical supplies. Previously, we showed that AgNPs trigger apoptotic processes in mouse blastocysts, leading to a decrease in cell viability and impairment of preimplantation and postimplantation embryonic development in vitro and in vivo. In the present study, we further investigated the hazardous effects of AgNPs on mouse oocyte maturation, in vitro fertilization (IVF), and subsequent preimplantation and postimplantation development in vitro and in vivo. Data from in vitro experiments revealed that AgNPs impair mouse oocyte maturation, decrease IVF rates, and induce injury effects on subsequent embryonic development to a significant extent. In an animal model, intravenous injection of AgNPs (5 mg/kg body weight) led to a significant decrease in mouse oocyte maturation and IVF concomitant with impairment of early embryonic development in vivo. Importantly, pretreatment with N-acetylcysteine effectively prevented AgNP-triggered reactive oxygen species (ROS) production and apoptosis, clearly suggesting a critical role of ROS as an upstream initiator or key regulator of AgNP-induced hazardous effects on oocyte maturation and sequent embryonic development. Furthermore, preincubation of oocytes with Ac-DEVD-cho, a caspase-3-specific inhibitor, effectively prevented hazardous effects, highlighting the potential involvement of caspase-dependent apoptotic signaling cascades in AgNP-mediated events. Expression levels of p53 and p21 of blastocysts were upregulated upon preincubation of mouse oocytes with AgNPs. Our collective results imply that cell apoptosis in mouse blastocysts derived from the AgNP-pretreated oocytes via intracellular ROS generation, which is further mediated through p53-, p21-, and caspase-3-dependent regulatory mechanisms.

Polyamino Acid Layer-by-Layer (LbL) Constructed Silica-Supported Mesoporous Titania Nanocarriers for Stimuli-Responsive Delivery of microRNA 708 and Paclitaxel for Combined Chemotherapy

Cellular Fas-associated protein with death domain-like interleukin-1β-converting enzyme-inhibitory protein (c-FLIP), often strongly expressed in numerous cancers, plays a pivotal role in thwarting apoptosis and inducing chemotherapy resistance in cancer. An integrated approach combining chemotherapy with suppression of c-FLIP levels could prove paramount in the treatment of cancers with c-FLIP overexpression. In this study, we utilized a polymeric layer-by-layer (LbL) assembly of silica-supported mesoporous titania nanoparticles (MTNst) to co-deliver paclitaxel (PTX) and microRNA 708 (miR708) for simultaneous chemotherapy and c-FLIP suppression in colorectal carcinoma. The resulting LbL miR708/PTX-MTNst showed dose-dependent cytotoxicity in HCT-116 and DLD-1 colorectal carcinoma cell lines, which was remarkably superior to that of free PTX or LbL PTX-MTNst. LbL miR708/PTX-MTNst strongly inhibited c-FLIP expression and resulted in increased expression of proapoptotic proteins. In DLD-1 xenograft tumor-bearing mice, the nanoparticles accumulated in the tumor, resulting in remarkable tumor regression, with the PTX and miR708-loaded nanoparticles showing significantly greater inhibitory effects than the free PTX or PTX-loaded nanoparticles. Immunohistochemical analyses of the tumors further confirmed the remarkable apoptotic and antiproliferative effects of the nanoparticles, whereas organ histology reinforced the biocompatibility of the system. Therefore, the LbL miR708/PTX-MTNst system, owing to its ability to deliver both chemotherapeutic drug and inhibitory miRNA to the tumor site, shows great potential to treat colorectal carcinoma in clinical settings.

Non-photochemical catalytic hydrolysis of methyl parathion using core–shell Ag@TiO2 nanoparticles

Highly water-dispersible core–shell Ag@TiO₂ nanoparticles were prepared and shown to be catalytically active for the rapid degradation of the organothiophosphate pesticide methyl parathion (MeP). Formation of the hydrolysis product, p-nitrophenolate was monitored at pH 7.5 and 8.0, using UV-Vis spectroscopy. ³¹P NMR spectroscopy confirmed that hydrolysis is the predominant pathway for substrate breakdown under non-photocatalytic conditions. We have demonstrated that the unique combination of TiO₂ with silver nanoparticles is required for catalytic hydrolysis with good recyclability. This work represents the first example of MeP degradation using TiO₂ doped with AgNPs under mild and ambient conditions. Analysis of catalytic data and a proposed dark mechanism for MeP hydrolysis using core–shell Ag@TiO₂ nanoparticles are described.

Ag@TiO₂ non-photochemical catalyzed degradation of organophosphosphates.

Ultrathin Oxide Layer-Wrapped Noble Metal Nanoparticles via Colloidal Electrostatic Self-Assembly for Efficient and Reusable Surface Enhanced Raman Scattering Substrates

Controllable and flexible fabrication of ultrathin and uniform oxide layer-wrapped noble metal nanoparticles (NPs) has been expected. Here a new strategy is presented for them based on colloidal electrostatic attraction and self-assembly on the metal NPs via one-step laser ablation of noble metal targets in the hydrolysis-induced hydroxide sol solutions at room temperature. The Au NPs, with several tens of nanometers in size, are taken as core part and TiO₂ as shell-layer to demonstrate the validity of the presented strategy. It has been shown that the TiO₂ shell-wrapped Au NPs are obtained after laser ablation of Au target in the hydrolysis-induced Ti(OH)₄ sol solution. The Au NPs are about 35 nm in mean size, and the TiO₂ shell layers are amorphous in structure and about 2.5 nm in thickness. The shell thickness is nearly independent of the Au NPs' size. Further experiments have shown that the thickness and crystallinity of the shell-layer can be tuned and controlled via changing the temperature or pH value of the Ti(OH)₄ sol solution or prolonging the laser ablation duration. The formation of the TiO₂ shell-wrapped Au NPs is attributed to attachment and self-assembly of Ti(OH)₄ colloids on the laser-induced Au NPs due to the electrostatic attraction between them. Importantly, the presented strategy is universal and suitable for fabrication of many other ultrathin oxide-wrapped noble metal NPs. A series of oxide shell-wrapped noble metal NPs have been successfully fabricated, such as Au@oxides (Fe₂O₃, Al₂O₃, CuO, and ZnO) as well as Pt@TiO₂ and Pd@TiO₂, etc. Further, compared with the pure gold NPs-built film, the TiO₂-wrapped Au NPs-built film has exhibited much stronger surface enhanced Raman scattering (SERS) performance to the anions NO₃^-, which weakly interact with noble metals, and the good reusability for the SERS-based detection of 4-nitrophenol, which could be photodegraded by xenon lamp irradiation. This work provides a flexible and universal route to the ultrathin and uniform oxide layer-wrapped noble metal NPs.

Synthesis and characterization of noble metal-titania core-shell nanostructures with tunable shell thickness

Core-shell nanostructures have found applications in many fields, including surface enhanced spectroscopy, catalysis and solar cells. Titania-coated noble metal nanoparticles, which combine the surface plasmon resonance properties of the core and the photoactivity of the shell, have great potential for these applications. However, the controllable synthesis of such nanostructures remains a challenge due to the high reactivity of titania precursors. Hence, a simple titania coating method that would allow better control over the shell formation is desired. A sol-gel based titania coating method, which allows control over the shell thickness, was developed and applied to the synthesis of Ag@TiO₂ and Au@TiO₂ with various shell thicknesses. The morphology of the synthesized structures was investigated using scanning electron microscopy (SEM). Their sizes and shell thicknesses were determined using tunable resistive pulse sensing (TRPS) technique. The optical properties of the synthesized structures were characterized using UV-vis spectroscopy. Ag@TiO₂ and Au@TiO₂ structures with shell thickness in the range of ≈40-70 nm and 90 nm, for the Ag and Au nanostructures respectively, were prepared using a method we developed and adapted, consisting of a change in the titania precursor concentration. The synthesized nanostructures exhibited significant absorption in the UV-vis range. The TRPS technique was shown to be a very useful tool for the characterization of metal-metal oxide core-shell nanostructures.

Coordination polymer nanocapsules prepared using metal-organic framework templates for pH-responsive drug delivery

A facile, efficient, and versatile approach is presented to synthesize pH-responsive nanocapsules (∼120 nm) by combining the advantages of metal-organic frameworks (MOFs) and metal-organic thin films. ZIF-8 nanoparticles are used as templates on which a thin film coating of iron(III)-catechol complexes is derived from the coordination between dopamine-modified alginate (AlgDA) and iron(III) ions. After the template removal, nanocapsules with a pH-responsive wall are obtained. Doxorubicin (Dox), a typical anticancer drug, is first immobilized in ZIF-8 frameworks through coprecipitation and then encapsulated in nanocapsules after the removal of ZIF-8. The structure of the iron(III)-catechol complex varies with pH value, thus conferring the Dox@Nanocapsules with tailored release behavior in vitro. Cytotoxicity tests illustrate the highly effective cytotoxicity of Dox@Nanocapsules towards cancer cells. This study provides a new method for preparing smart nanocapsules and offers more opportunities for the controlled delivery of drugs.

An environmentally benign one pot green synthesis of reduced graphene oxide based composites for the enzyme free electrochemical detection of hydrogen peroxide

An rGO/Ag–Pd nanocomposite prepared by using Arachis hypogaea scrap extract was exploited as an enzyme-free electrochemical probe for the detection of H₂O₂.

Shell thickness matters! Energy transfer and rectification study of Au/ZnO core/shell nanoparticles

In the present study we report the influence of shell thickness on fluorescence resonance energy transfer between Au/ZnO core-shell nanoparticles and Rhodamine 6G dye by steady-state and time-resolved spectroscopy and rectification behaviours. Au/ZnO core-shell nanoparticles with different shell thickness were synthesized in aqueous solution by chemically depositing zinc oxide on gold nanoparticles surface. A pronounced effect on the photoluminescence (PL) intensity and shortening of the decay time of the dye in presence of Au/ZnO core-shell nanoparticles is observed. The calculated energy transfer efficiencies from dye to Au/ZnO are 62.5%, 79.2%, 53.6% and 46.7% for 1.5nm, 3nm, 5nm and 8nm thickness of shell, respectively. Using FRET process, the calculated distances (r) are 117.8, 113.2Å 129.9Å and 136.7Å for 1.5nm, 3nm, 5nm and 8nm thick Au/ZnO core-shell nanoparticles, respectively. The distances (d) between the donor and acceptor are 71.0, 57.8, 76.2 and 81.6Å for 1.5nm, 3nm, 5nm and 8nm thick core-shell Au/ZnO nanoparticles, respectively, using the efficiency of surface energy transfer (SET). The current-voltage (I-V) curve of hybrid Au/ZnO clearly exhibits a rectifying nature and represents the n-type Schottky diode characteristics with a typical turn-on voltage of between 0.6 and 1.3V. It was found that the rectifying ratio increases from 20 to 90 with decreasing the thickness of the shell from 5nm to 3nm and with shell thickness of 8nm, electrical transport through the core-shell is similar to what is observed with pure ZnO samples nanoparticles. The results indicated that the Au/ZnO core-shell nanoparticles with an average shell thickness of 3nm exhibited the maximum energy transfer efficiencies (79.2%) and rectification (rectifying ratio 90).

Direct coating of mesoporous titania on CTAB-capped gold nanorods

We demonstrate a CTAB-templated approach towards direct coating of mesoporous titania on gold nanorods in aqueous solutions. The formation of the mesoporous shell is found to be closely correlated with CTAB concentration and the amount of the titania precursor. This approach can be readily extended to form mesoporous titania shells on other CTAB-capped nanoparticles.

RETRACTED: A universal cooperative assembly-directed method for coating of mesoporous TiO(2) nanoshells with enhanced lithium storage properties

TiO2 is exceptionally useful, but it remains a great challenge to develop a universal method to coat TiO2 nanoshells on different functional materials. We report a one-pot, low-temperature, and facile method that can rapidly form mesoporous TiO2 shells on various inorganic, organic, and inorganic-organic composite materials, including silica-based, metal, metal oxide, organic polymer, carbon-based, and metal-organic framework nanomaterials via a cooperative assembly-directed strategy. In constructing hollow, core-shell, and yolk-shell geometries, both amorphous and crystalline TiO2 nanoshells are demonstrated with excellent control. When used as electrode materials for lithium ion batteries, these crystalline TiO2 nanoshells composed of very small nanocrystals exhibit remarkably long-term cycling stability over 1000 cycles. The electrochemical properties demonstrate that these TiO2 nanoshells are promising anode materials.

Smart adsorbents with reversible photo-regulated molecular switches for selective adsorption and efficient regeneration

A new class of adsorbents with reversible photo-regulated molecular switches was fabricated and simultaneously realized selective adsorption and efficient regeneration.

In situ growth of Ag/Ag2O nanoparticles on g-C3N4 by a natural carbon nanodot-assisted green method for synergistic photocatalytic activity

Novel visible-light-driven Ag/Ag₂O@g-C₃N₄ hybrid materials were synthesized successfully via a green, facile hydrothermal treatment approach by reducing AgNO₃ with carbon nanodots for the first time.

1550 nm modulating retroreflector based on coated nanoparticles for free-space optical communication

Nowadays, there is a renaissance in the field of space exploration. Current and future missions depend on astronauts and a swarm of robots for reconnaissance. In order to reduce the power consumption, weight, and size of the robots, an asymmetric communication system may be used. This is achieved by installing modulating retroreflectors (MRRs) on one side of the link and an interrogating laser on the other side. In this paper, we theoretically study an innovative device that can serve as an MRR in the infrared range of the spectrum. The device is based on a ferroelectric PZT thin film containing TiO₂ coated Ag nanoparticles, which exhibit strong plasmonic resonance in the infrared range. After intensive analyses, which included calculations and simulations, we were able to design the device to operate at the 1550 nm wavelength. This is of great importance since the design of devices operating at 1550 nm as this wavelength is a mature technology widely used in free-space optics. Hence, this MRR can serve in asymmetric communication links relying on 1550 nm transmissions, which are also eye-safe. To the best of our knowledge, this is the first time coated metal nanoparticles have been proposed to modulate light in the infrared region. The performance of this device is unique, reaching a 17.5 dB modulation contrast with only a ±2 V operating voltage. This modulator may also be used for terrestrial communication such as fiber optics and optical interconnects in future data centers.

Utilization of hydroxypropyl carboxymethyl cellulose in synthesis of silver nanoparticles

Hydroxypropyl carboxymethyl cellulose samples having varying degrees of substitution and varying degrees of polymerization were used to reduce silver nitrate to silver nanoparticles. UV spectral analysis of silver nanoparticles colloidal solution reveal that increasing the pH of the reduction solution leads to improvement in the intensity of the absorption band for silver nanoparticles, to be maximum at pH 11. The absorption peak intensity also enhanced upon prolonging the reaction duration up to 60 min. The conversion of silver ions to metallic silver nanoparticles was found to be temperature-dependent and maximum transformation occurs at 60 °C. The reduction efficiency of hydroxypropyl carboxymethyl cellulose was found to be affected by its degree of polymerization. Colloidal solutions of silver nanoparticles having concentration up to 1000 ppm can be prepared upon fixing the ratio between silver nitrate and hydroxypropyl carboxymethyl cellulose at 0.017-0.3g per each 100ml of the reduction solution.

(Hollow Au–Ag nanoparticles)–TiO2 composites for improved photocatalytic activity prepared from block copolymer-stabilized bimetallic nanoparticles

(Hollow AuAg nanoparticles)–TiO₂ composite particles, showing higher photocatalytic activity, have been prepared.

In situ synthesis of silver supported nanoporous iron oxide microbox hybrids from metal-organic frameworks and their catalytic application in p-nitrophenol reduction

Ag nanoparticles (NPs) are successfully grown in situ on nanoporous Fe2O3 microboxes (Ag/Fe2O3) simply by annealing Prussian blue (PB) in the presence of silver nitrate for the first time. The catalytic activity of the Ag/Fe2O3 microboxes for the reduction of p-nitrophenol (PNP) with NaBH4 is measured by UV-vis spectroscopy. It is found that the composites exhibit bifunctional properties with high magnetization and excellent catalytic activity toward PNP reduction. The high catalytic activity of the catalyst might be attributed to its high surface area and the synergistic effect on the delivery of electrons between Ag NPs and Fe2O3 microboxes. In addition, efficient reduction is observed and found to depend upon the content of Ag in the Ag/Fe2O3 microboxes. The dosage of the catalyst and the reaction temperature were investigated. Furthermore, the catalysts can be easily recycled by applying an external magnetic field while maintaining the catalytic activity without significant decrease even after running six times. The unique properties provide an ideal platform to study various metal/Fe2O3 catalysts which can be potentially applied in a wide variety of fields of catalysis and green chemistry.

UV-visible light-activated Ag-decorated, monodisperse TiO2 aggregates for treatment of the pharmaceutical oxytetracycline

Noble metal Ag-decorated, monodisperse TiO2 aggregates were successfully synthesized by an ionic strength-assisted, simple sol-gel method and were used for the photocatalytic degradation of the antibiotic oxytetracycline (OTC) under both UV and visible light (UV-visible light) irradiation. The synthesized samples were characterized by X-ray diffraction analysis (XRD); UV-vis diffuse reflectance spectroscopy; environmental scanning electron microscopy (ESEM); transmission electron microscopy (TEM); high-resolution TEM (HR-TEM); micro-Raman, energy-dispersive X-ray spectroscopy (EDS); and inductively coupled plasma optical emission spectrometry (ICP-OES). The results showed that the uniformity of TiO2 aggregates was finely tuned by the sol-gel method, and Ag was well decorated on the monodisperse TiO2 aggregates. The absorption of the samples in the visible light region increased with increasing Ag loading that was proportional to the amount of Ag precursor added in the solution over the tested concentration range. The Brunauer, Emmett, and Teller (The BET) surface area slightly decreased with increasing Ag loading on the TiO2 aggregates. Ag-decorated TiO2 samples demonstrated enhanced photocatalytic activity for the degradation of OTC under UV-visible light illumination compared to that of pure TiO2. The sample containing 1.9 wt% Ag showed the highest photocatalytic activity for the degradation of OTC under both UV-visible light and visible light illumination. During the experiments, the detected Ag leaching for the best TiO2-Ag photocatalyst was much lower than the National Secondary Drinking Water Regulation for Ag limit (0.1 mg L(-1)) issued by the US Environmental Protection Agency.

Core/shell nanoparticles in biomedical applications

Nanoparticles have several exciting applications in different areas and biomedial field is not an exception of that because of their exciting performance in bioimaging, targeted drug and gene delivery, sensors, and so on. It has been found that among several classes of nanoparticles core/shell is most promising for different biomedical applications because of several advantages over simple nanoparticles. This review highlights the development of core/shell nanoparticles-based biomedical research during approximately past two decades. Applications of different types of core/shell nanoparticles are classified in terms of five major aspects such as bioimaging, biosensor, targeted drug delivery, DNA/RNA interaction, and targeted gene delivery.

Highly efficient and recyclable triple-shelled Ag@Fe3O4@SiO2@TiO2 photocatalysts for degradation of organic pollutants and reduction of hexavalent chromium ions

Herein, we demonstrate the design and fabrication of the well-defined triple-shelled Ag@Fe3O4@SiO2@TiO2 nanospheres with burr-shaped hierarchical structures, in which the multiple distinct functional components are integrated wonderfully into a single nanostructure. In comparison with commercial TiO2 (P25), pure TiO2 microspheres, Fe3O4@SiO2@TiO2 and annealed Ag@Fe3O4@SiO2@TiO2 nanocomposites, the as-obtained amorphous triple-shelled Ag@Fe3O4@SiO2@TiO2 hierarchical nanospheres exhibit a markedly enhanced visible light or sunlight photocatalytic activity towards the photodegradation of methylene blue and photoreduction of hexavalent chromium ions in wastewater. The outstanding photocatalytic activities of the plasmonic photocatalyst are mainly due to the enhanced light harvesting, reduced transport paths for both mass and charge transport, reduced recombination probability of photogenerated electrons/holes, near field electromagnetic enhancement and efficient scattering from the plasmonic nanostructure, increased surface-to-volume ratio and active sites in three dimensional (3D) hierarchical porous nanostructures, and improved photo/chemical stability. More importantly, the hierarchical nanostructured Ag@Fe3O4@SiO2@TiO2 photocatalysts could be easily collected and separated by applying an external magnetic field and reused at least five times without any appreciable reduction in photocatalytic efficiency. The enhanced photocatalytic activity and excellent chemical stability, in combination with the magnetic recyclability, make these multifunctional nanostructures promising candidates to remediate aquatic contaminants and meet the demands of future environmental issues.

Preparation of gold/titania core-shell nanocomposites with a tunable shell thickness

Gold/titania nanocomposites with a core-shell structure were prepared by sol-gel reaction of titanium tetrabutoxide (TTBO) with gold nanoparticles, core-stabilized with cetyltrimethylammonium bromide (CTAB), using a ternary mixture of alcohol/acetonitrile/water as solvent. TEM characterization of the resulting constructs revealed spherical nanocomposites, each containing a single gold core. The mean diameter of the gold cores was 13 nm, while the thicknesses of titania shells were readily tuned in the range 4-30 nm by varying the alkyl chain length of the alcohol. In addition, the gold nanoparticles exhibited a deep red color, with an intense extinction peak at 527 nm, owing to their surface plasmon resonance (SPR) properties. When the Au nanoparticles were coated with a titania shell, their color changed to purple and the SPR peak shifted to a higher wavelength of 537 nm. Furthermore, the core-shell nanocomposites were found to display photocatalytic activity for the oxidation of 2-propanol under illumination by visible light (λ=500-560 nm).

Preparation of gold/silver/titania trilayered nanorods and their photocatalytic activities

Gold/silver/titania trilayered nanorods have been prepared by the successive deposition of silver and titania layers on gold nanorod cores, and their photocatalytic activities were investigated under visible-light illumination (λ > 420 nm). The photocatalytic activity of the trilayered nanorods in the oxidation of 2-propanol depends on both the Au/Ag composition and the thickness of the TiO2 shell. It increases with increasing Ag content up to [Au]/[Ag] = 1:5 (molar ratio) and then decreases with further increasing Ag content. The photocatalytic activity also increases with increasing TiO2 shell thickness up to 10 nm and then decreases with further increases in the shell thickness. These effects were explained by electron-transfer and energy-transfer mechanisms.

New facile synthesis of one-dimensional Ag@TiO2 anatase core–shell nanowires for enhanced photocatalytic properties

One-dimensional Ag@TiO₂ anatase core–shell nanowires are fabricated and exhibit high photocatalytic activity for degrading organic contaminants under visible-light irradiation.