Synthesis, Characterization, and Self-Assembly of Pencil-Shaped CoO Nanorods

Ligands of Nanoparticles and Their Influence on the Morphologies of Nanoparticle-Based Films

Nanoparticle-based thin films are increasingly being used in various applications. One of the key factors that determines the properties and performances of these films is the type of ligands attached to the nanoparticle surfaces. While long-chain surfactants, such as oleic acid, are commonly employed to stabilize nanoparticles and ensure high monodispersity, these ligands often hinder charge transport due to their insulating nature. Although thermal annealing can remove the long-chain ligands, the removal process often introduces defects such as cracks and voids. In contrast, the use of short-chain organic or inorganic ligands can minimize interparticle distance, improving film conductivity, though challenges such as incomplete ligand exchange and residual barriers remain. Polymeric ligands, especially block copolymers, can also be employed to create films with tailored porosity. This review discusses the effects of various ligand types on the morphology and performance of nanoparticle-based films, highlighting the trade-offs between conductivity, structural integrity, and functionality.

Advancements in polyol synthesis: expanding chemical horizons and Néel temperature tuning of CoO nanoparticles

The polyol synthesis of CoO nanoparticles (NPs) is typically conducted by dissolving and heating cobalt acetate tetrahydrate and water in diethylene glycol (DEG). This process yields aggregates of approximately 100 nm made of partially aligned primary crystals. However, the synthesis demands careful temperature control to allow the nucleation of CoO while simultaneously preventing reduction, caused by the activity of DEG. This restriction hinders the flexibility to freely adjust synthesis conditions, impeding the ability to obtain particles with varied morpho-structural properties, which, in turn, directly impact chemical and physical attributes. In this context, the growth of CoO NPs in polyol was studied focusing on the effect of the polyol chain length and the synthesis temperature at two different water/cations ratios. During this investigation, we found that longer polyol chains remove the previous limits of the method, allowing the tuning of aggregate size (20-150 nm), shape (spherical-octahedral), and crystalline length (8-35 nm). Regarding the characterization, our focus revolved around investigating the magnetic properties inherent in the synthesized products. From this point of view, two pivotal findings emerged. Firstly, we identified small quantities of a layered hydroxide ferromagnetic intermediate, which acted as interference in our measurements. This intermediate exhibited magnetic properties consistent with features observed in other publications on CoO produced in systems compatible with the intermediate formation. Optimal synthetic conditions that prevent the impurity from forming were found. This resolution clarifies several ambiguities existing in literature about CoO low-temperature magnetic behavior. Secondly, a regular relationship of the NPs' TN with their crystallite size was found, allowing us to regulate TN over ~ 80 K. For the first time, a branching was found in this structure-dependent magnetic feature, with samples of spheroidal morphology consistently having lower magnetic temperatures, when compared to samples with faceted/octahedral shape, providing compelling evidence for a novel physical parameter influencing the TN of a material. These two findings contribute to the understanding of the fundamental properties of CoO and antiferromagnetic materials.

Size-controlled liquid phase synthesis of colloidally stable Co3O4 nanoparticles

Spinel cobalt(ii,iii) oxide (Co₃O₄) represents a p-type semiconductor exhibiting promising functional properties in view of applications in a broad range of technological fields including magnetic materials and gas sensors as well as sustainable energy conversion systems based on photo- and electrocatalytic water splitting. Due to their high specific surface area, nanoparticle-based structures appear particularly promising for such applications. However, precise control over the diameter and the particle size distribution is required to achieve reproducible size-dependent properties. We herein introduce a synthetic strategy based on the decomposition of hydroxide precursors for the size-controlled preparation of purified Co₃O₄ nanoparticles with narrow size distributions adjustable in the range between 3-13 nm. The particles exhibit excellent colloidal stability. Their dispersibility in diverse organic solvents further facilitates processing (i.e. ligand exchange) and opens exciting perspectives for controlled self-assembly of the largely isometric primary particles into mesoscale structures. In view of potential applications, functional properties including absorption characteristics and electrocatalytic activity were probed by UV-Vis spectroscopy and cyclic voltammetry, respectively. In these experiments, low amounts of dispersed Co₃O₄ particles demonstrate strong light absorbance across the entire visible range and immobilized nanoparticles exhibit a comparably low overpotential towards the oxygen evolution reaction in electrocatalytic water splitting.

Size-Tunable Magnetite Nanoparticles from Well-Defined Iron Oleate Precursors

The synthesis of iron oxide nanoparticles with control over size and shape has long been an area of research, with iron oleate being arguably the most successful precursor. Issues with reproducibility and versatility in iron oleate-based syntheses remain, however, in large part due to the mutable nature of its structure and stoichiometry. In this work, we characterize two new forms of iron oleate precursor that can be isolated in large quantities, show long-term stability, and have well-defined stoichiometry, leading to reproducible and predictable reactivity. Synthesis with these precursors is shown to produce iron oxide nanoparticles in a tunable size range of 4-16 nm with low size dispersity and properties consistent with magnetite in the superparamagnetic size regime.

Synthesis and Characterization of Anatase TiO2 Nanorods: Insights from Nanorods’ Formation and Self-Assembly

Highly crystalline, organic-solvent-dispersible titanium dioxide (TiO2) nanorods (NRs) present promising chemicophysical properties in many diverse applications. In this paper, based on a modified procedure from literature, TiO2 NRs were synthesized via a ligand-assisted nonhydrolytic sol-gel route using oleic acid as the solvent, reagent, and ligand and titanium (IV) isopropoxide as the titanium precursor. This procedure produced monodisperse TiO2 NRs, as well as some semi-spherical titania nanocrystals (NCs) that could be removed by size-selective precipitation. X-ray diffraction and selected area electron diffraction results showed that the nanorods were anatase, while the semipheres also contained the TiO2(B) phase. By taking samples during the particle growth, it was found that the average length of the initially grown NRs decreased during the synthesis. Possible reasons for this unusual growth path, partially based on high-resolution transmission electron microscopy (HRTEM) observations during the growth, were discussed. The dispersion of anatase TiO2 nanorods was capable of spontaneous formation of lyotropic liquid crystals on the TEM grid and in bulk. Considering high colloidal stability together with the large optical birefringence displayed by these high refractive index liquid crystalline domains, we believe these TiO2 NRs dispersions are promising candidates for application in transparent and switchable optics.

A Facile Route for the Preparation of Monodisperse Iron nitride at Silica Core/shell Nanostructures

Uniform-sized iron oxide nanoparticles obtained from the solution phase thermal decomposition of the iron-oleate complex were encapsulated inside the silica shell by the reverse microemulsion technique, and then thermal treatment under NH₃ to transfer the iron oxide to iron nitride. The transmission electron microscopy images distinctly demonstrated that the as-prepared iron nitride at silica core/shell nanostructures were highly uniform in particle-size distribution. By using iron oxide nanoparticles of 6.1, 10.3, 16.2, and 21.8 nm as starting materials, iron nitride nanoparticles with average diameters of 5.6, 9.3, 11.6, and 16.7 nm were produced, respectively. The acid-resistant properties of the iron nitride at silica core/shell nanostructures were found to be much higher than the starting iron oxide at silica. A superconducting quantum interference device was used for the magnetic characterization of the nanostructure. Besides, magnetic resonance imaging (MRI) studies using iron nitride at silica nanocomposites as contrast agents demonstrated T ₂ enhanced effects that were dependent on the concentration. These core/shell nanostructures have enormous potential in magnetic nanodevice and biomedical applications. The current process is expected to be easy for large-scale and transfer other metal oxide nanoparticles.

Self-Assembly of 2D Nematic and Random Arrays of Sterically Stabilized Nanoscale Rods with and without Evaporation

The adequate manipulation of nanometer-scale building blocks using dispersion systems is regarded as a fundamental technique to fabricate elaborate microstructures. Although a liquid flow with evaporation is generally regarded as an essential factor for the self-assembly of floating blocks, experimental evidence has not been sufficient to clarify the importance of the flow in the dispersion systems. In the present study, 2D nematic layers of sterically stabilized nanoscale calcite rods were achieved in a millimeter-scale region on a solid substrate via the very slow recession of an organic dispersion with evaporation. 2D random arrays of the nanorods were obtained via recession of the liquid in the same system without evaporation. When the nanorods were not sterically stabilized, 3D random arrays were formed even with evaporation. We demonstrated that the evaporation-driven flow of sterically stabilized nanorods to a confined space at the air-liquid-solid interface is essential for the formation of 2D nematic structures on a substrate.

Unconventional-Phase Crystalline Materials Constructed from Multiscale Building Blocks

Crystal phase, an intrinsic characteristic of crystalline materials, is one of the key parameters to determine their physicochemical properties. Recently, great progress has been made in the synthesis of nanomaterials with unconventional phases that are different from their thermodynamically stable bulk counterparts via various synthetic methods. A nanocrystalline material can also be viewed as an assembly of atoms with long-range order. When larger entities, such as nanoclusters, nanoparticles, and microparticles, are used as building blocks, supercrystalline materials with rich phases are obtained, some of which even have no analogues in the atomic and molecular crystals. The unconventional phases of nanocrystalline and supercrystalline materials endow them with distinctive properties as compared to their conventional counterparts. This Review highlights the state-of-the-art progress of nanocrystalline and supercrystalline materials with unconventional phases constructed from multiscale building blocks, including atoms, nanoclusters, spherical and anisotropic nanoparticles, and microparticles. Emerging strategies for engineering their crystal phases are introduced, with highlights on the governing parameters that are essential for the formation of unconventional phases. Phase-dependent properties and applications of nanocrystalline and supercrystalline materials are summarized. Finally, major challenges and opportunities in future research directions are proposed.

Role of the Precursor Composition in the Synthesis of Metal Ferrite Nanoparticles

Ternary oxide nanoparticles have attracted much interest because of their intriguing properties, which are not exhibited by binary oxide nanoparticles. However, the synthesis of ternary oxide nanoparticles is not trivial and requires a fundamental understanding of the complicated precursor chemistry that governs the formation mechanism. Herein, we investigate the role of the chemical composition of precursors in the formation of ternary oxide nanoparticles via a combination of mass spectrometry, electron microscopy with elemental mapping, and thermogravimetric analysis. Mn²⁺, Co²⁺, and Ni²⁺ ions easily form bimetallic-oxo clusters with Fe³⁺ ions with a composition of MFe₂O(oleate)₆ (M = Mn, Co, Ni). The use of clusters as precursors leads to the successful synthesis of monodisperse metal ferrite nanoparticles (MFe₂O₄). On the contrary, zinc- or copper-containing complexes are formed independently from iron-oxo clusters in the precursor synthesis. The mixture of complexes without a bimetallic-oxo core yields a mixture of two different nanoparticles. This study reveals the importance of the precursor composition in the synthesis of ternary oxide nanoparticles.

Stabilizing Hard Magnetic SmCo5 Nanoparticles by N-Doped Graphitic Carbon Layer

We report a chemical method to synthesize size-controllable SmCo₅ nanoparticles (NPs) and to stabilize the NPs against air oxidation by coating a layer of N-doped graphitic carbon (NGC). First 10 nm CoO and 5 nm Sm₂O₃ NPs were synthesized and aggregated in reverse micelles of oleylamine to form SmCo-oxide NPs with a controlled size (110, 150, or 200 nm). The SmCo-O NPs were then coated with polydopamine and thermally annealed to form SmCo-O/NGC NPs, which were further embedded in CaO matrix and reduced with Ca at 850 °C to give SmCo₅/NGC NPs of 80, 120, or 180 nm, respectively. The 10 nm NGC coating efficiently stabilized the SmCo₅ NPs against air oxidation at room temperature or at 100 °C. The magnetization value of the 180 nm SmCo₅/NGC NPs was stabilized at 86.1 emu/g 5 days after air exposure at room temperature and dropped only 1.7% 48 h after air exposure at 100 °C. The stable SmCo₅/NGC NPs were aligned magnetically in an epoxy resin, showing a square-like hysteresis behavior with their H_c reaching 51.1 kOe at 150 K and 21.9 kOe at 330 K and their M_r stabilized at around 84.8 emu/g. Our study demonstrates a new strategy for synthesizing and stabilizing SmCo₅ NPs for high-performance nanomagnet applications in a broad temperature range.

Controlled syntheses of monodispersed metal oxide nanocrystals from bulk metal oxide materials

High quality metal oxides nanocrystals are synthesized from bulk metal oxides in the presence of surfactants and high boiling point solvent.

Evolution of Co3O4 Nanocubes through Stepwise Oriented Attachment

Uniformly sized building units are generally required to construct highly elaborate architectures over a wide range. Defined nanocubes of Co₃O₄ evolved from deformed precursor nanograins 2-5 nm in diameter through direct oriented attachment in a nonpolar medium. Uniformly sized primary nanocubes ∼8 nm on a side with {100} faces were formed by adjusting the coverage of the oxide nanograins with oleic acid. Larger nanocubes 20-40 nm on a side were produced with further direct oriented attachment of the primary nanocubes. Ordered arrays, such as superlattices, were found to be constructed by the indirect oriented attachment of the primary and larger nanocubes covered with organic molecules.

Large-Scale Synthesis and Medical Applications of Uniform-Sized Metal Oxide Nanoparticles

Thanks to recent advances in the synthesis of high-quality inorganic nanoparticles, more and more types of nanoparticles are becoming available for medical applications. Especially, metal oxide nanoparticles have drawn much attention due to their unique physicochemical properties and relatively inexpensive production costs. To further promote the development and clinical translation of these nanoparticle-based agents, however, it is highly desirable to reduce unwanted interbatch variations of the nanoparticles because characterizing and refining each batch are costly, take a lot of effort, and, thus, are not productive. Large-scale synthesis is a straightforward and economic pathway to minimize this issue. Here, the recent achievements in the large-scale synthesis of uniform-sized metal oxide nanoparticles and their biomedical applications are summarized, with a focus on nanoparticles of transition metal oxides and lanthanide oxides, and clarifying the underlying mechanism for the synthesis of uniform-sized nanoparticles. Surface modification steps to endow hydrophobic nanoparticles with water dispersibility and biocompatibility are also briefly described. Finally, various medical applications of metal oxide nanoparticles, such as bioimaging, drug delivery, and therapy, are presented.

Synthesis-Structure-Activity Relationships in Co3O4 Catalyzed CO Oxidation

In this work, a statistical design and analysis platform was used to develop cobalt oxide based oxidation catalysts prepared via one pot metal salt reduction. An emphasis was placed upon understanding the effects of synthesis conditions, such as heating regimen and Co²⁺ concentration on the metal salt reduction mechanism, the resultant nanomaterial properties (i.e., size, crystal structure, and crystal faceting), and the catalytic activity in CO oxidation. This was accomplished by carrying out XRD, TEM, and FTIR studies on synthesis intermediates and products. Additionally, high-throughput experimentation was employed to study the performance of Co₃O₄ oxidation catalysts over a wide range of reaction conditions using a 16-channel fixed bed reactor equipped with a parallel infrared imaging system. Specifically, Co₃O₄ nanomaterials of varying properties were evaluated for their performance as CO oxidation catalysts. Figure-of-merits including light-off temperatures and activation energies were measured and mapped back to the catalyst properties and synthesis conditions. Statistical analysis methods were used to elucidate significant property-activity relationships as well as the design rules relevant in the synthesis of active catalysts. It was found that the degree of grain boundary consolidation and anisotropic growth in fcc and hcp CoO intermediates significantly influenced the catalytic activity. By utilizing the discovered synthesis-structure-activity relationships, CO oxidation light off temperatures were decreased to <90°C.

Unconventional morphologies of CoO nanocrystals via controlled oxidation of cobalt oleate precursors

We report an 'oxidation state' regulating method for the synthesis of anisotropic wurtzite CoO nanocrytals (NCs) with various shapes, including ultrathin nanosheets and a core-antenna structure for the first time. We show that the decomposition process of precursors was altered by their oxidation, which played a significant role in the unconventional growth.

Unravelling the Elusive Antiferromagnetic Order in Wurtzite and Zinc Blende CoO Polymorph Nanoparticles

Although cubic rock salt-CoO has been extensively studied, the magnetic properties of the main nanoscale CoO polymorphs (hexagonal wurtzite and cubic zinc blende structures) are rather poorly understood. Here, a detailed magnetic and neutron diffraction study on zinc blende and wurtzite CoO nanoparticles is presented. The zinc blende-CoO phase is antiferromagnetic with a 3rd type structure in a face-centered cubic lattice and a Néel temperature of T_N (zinc-blende) ≈225 K. Wurtzite-CoO also presents an antiferromagnetic order, T_N (wurtzite) ≈109 K, although much more complex, with a 2nd type order along the c-axis but an incommensurate order along the y-axis. Importantly, the overall magnetic properties are overwhelmed by the uncompensated spins, which confer the system a ferromagnetic-like behavior even at room temperature.

Phase-controlled synthesis and magnetic properties of cubic and hexagonal CoO nanocrystals

We report facile solution approaches for the phase-controlled synthesis of rock-salt cubic CoO (c-CoO) and wurtzite-type hexagonal CoO (h-CoO) nanocrystals. In the syntheses, the cobalt precursor cobalt (II) stearate is decomposed in 1-octadecene at 320 °C, and the crystalline phase of synthesized products depend critically on the amounts of H₂O. While the presence of small amounts of H₂O promotes the generation of c-CoO, h-CoO is obtained in the absence of H₂O. The as-prepared c-CoO nanocrystals exhibit a multi-branched morphology with several short rods growing on the 〈100〉 direction interlaced together whereas the h-CoO nanocrystals show a multi-rod structure with several rods growing on the same base facet along the c-axis. The formation mechanisms are discussed on the basis of FTIR spectrometry data and color changes of the reaction mixture. Finally the magnetic properties of as-prepared CoO nanocrystals are measured and the results show that c-CoO nanocrystals are intrinsically antiferromagnetic with a Néel temperature of about 300 K but the antiferromagnetic ordering is not distinct for the h-CoO nanocrystals. Weak ferromagnetic contributions are also observed for both c-CoO and h-CoO nanocrystals with obvious magnetic hysteresis at 5 and 300 K. The uncompensated spins that can be induced by crystalline defects such as cation-vacancy may account for the observed weak ferromagnetism.

Carbon-coated nanoparticle superlattices for energy applications

Nanoparticle (NP) superlattices represent a unique material architecture for energy conversion and storage. Recent reports on carbon-coated NP superlattices have shown exciting electrochemical properties attributed to their rationally designed compositions and structures, fast electron transport, short diffusion length, and abundant reactive sites via enhanced coupling between close-packed NPs, which are distinctive from their isolated or disordered NP or bulk counterparts. In this minireview, we summarize the recent developments of highly-ordered and interconnected carbon-coated NP superlattices featuring high surface area, tailorable and uniform doping, high conductivity, and structure stability. We then introduce the precisely-engineered NP superlattices by tuning/studying specific aspects, including intermetallic structures, long-range ordering control, and carbon coating methods. In addition, these carbon-coated NP superlattices exhibit promising characteristics in energy-oriented applications, in particular, in the fields of lithium-ion batteries, fuel cells, and electrocatalysis. Finally, the challenges and perspectives are discussed to further explore the carbon-coated NP superlattices for optimized electrochemical performances.

Organic Phase Syntheses of Magnetic Nanoparticles and Their Applications

In the past two decades, the synthetic development of magnetic nanoparticles (NPs) has been intensively explored for both fundamental scientific research and technological applications. Different from the bulk magnet, magnetic NPs exhibit unique magnetism, which enables the tuning of their magnetism by systematic nanoscale engineering. In this review, we first briefly discuss the fundamental features of magnetic NPs. We then summarize the synthesis of various magnetic NPs, including magnetic metal, metallic alloy, metal oxide, and multifunctional NPs. We focus on the organic phase syntheses of magnetic NPs with precise control over their sizes, shapes, compositions, and structures. Finally we discuss the applications of various magnetic NPs in sensitive diagnostics and therapeutics, high-density magnetic data recording and energy storage, as well as in highly efficient catalysis.

Orientation-selective alignments of nanoblocks in a and c directions of a tetragonal system through molecularly mediated manipulation

Selective 1D alignments of nanometric Mn₃O₄ cuboids in the a and c directions were achieved on the basis of the hydrophobic–hydrophilic interaction between a single dispersion medium and the specific crystal faces.

A simple synthesis of urchin-like Pt–Ni bimetallic nanostructures as enhanced electrocatalysts for the oxygen reduction reaction

Pt–Ni nanostructures have superior oxygen reduction reaction activities.

Conductive polymer-mediated 2D and 3D arrays of Mn3O4 nanoblocks and mesoporous conductive polymers as their replicas

Orientation-controlled 2D and 3D microarrays of Mn3O4 nanocuboids that were mediated by a conductive polymer were fabricated by evaporation-induced self-assembly of the oxide nanoblocks and subsequent polymerization of pyrrole in the interparticle spaces. Free-standing mesoporous polypyrroles (PPy) having chain- and square-grid-like nanovoid arrays were obtained as replicas of the composite assemblies by dissolving the oxide nanoblocks. The PPy-mediated manganese oxide arrays exhibited stable electrochemical performance as an ultrathin anode of a lithium-ion secondary battery.

Formation of Monocrystalline 1D and 2D Architectures via Epitaxial Attachment: Bottom-Up Routes through Surfactant-Mediated Arrays of Oriented Nanocrystals

Monocrystalline architectures with well-defined shapes were achieved by bottom-up routes through epitaxial attachment of Mn3O4 nanocrystals. The crystallographically continuous 1D chains elongated in the a axis and 2D panels having large a or c faces were obtained by removal of the organic mediator from surfactant-mediated 1D and 2D arrays of Mn3O4 nanocrystals, respectively. Our basal approach indicates that the epitaxial attachment through the surfactant-mediated arrays is utilized for fabrication of a wide variety of micrometric architectures from nanometric crystalline units.

Charge separation between polar {111} surfaces of CoO octahedrons and their enhanced visible-light photocatalytic activity

Crystal facet engineering of semiconductors has been proven to be an effective strategy to increase photocatalytic performances. However, the mechanism involved in the photocatalysis is not yet known. Herein, we report our success in that photocatalytic performances of the Cl(-) ion capped CoO octahedrons with exposed {111} facets were activated by a treatment using AgNO3 and NH3·H2O solutions. The clean CoO {111} facets were found to be highly reactivity faces. On the basis of the polar structure of the exposed {111} surfaces, a charge separation model between polar {111} surfaces is proposed. There is an internal electric field between polar {111} surfaces due to the spontaneous polarization. The internal electric field provides a driving force for charge separation. The reduction and oxidation reactions selectively take place on the positive and negative polar {111} surfaces. The charge separation model provides a clear insight into charge transfer in the semiconductor nanocrystals with high photocatalytic activities and offer guidance to design more effective photocatalysts, solar cells, photoelectrodes, and other photoelectronic devices.

Effects of Ar/H2 annealing on the microstructure and magnetic properties of CoO nanoparticles

Hysteresis loops and ZFC/FC curves of the Co/CoO composite nanoparticles.

Formation of uniformly sized metal oxide nanocuboids in the presence of precursor grains in an apolar medium

Oriented attachment of Mn₃O₄ primary particles covered with oleic acid was found to occur in an organic medium. Faceted nanocuboids were produced through oriented attachment and subsequent crystallographic fusion.

Effect of anions on the morphology of CdS nanoparticles prepared via thermal decomposition of different cadmium thiourea complexes in a solvent and in the solid state

Use of single-molecular precursors with different anions has been demonstrated to be an excellent method to synthesize CdS nanoparticles with different morphologies without using any external capping agent.

(CoxMg1−x)O nanocondensates by pulsed laser ablation of bulk alloy in air

(Co,Mg)O nanocondensates produced by pulsed laser ablation of MgO–CoO solid solution target in air.

Bimagnetic h-Co/h-CoO nanotetrapods: preparation, nanoscale characterization, three-dimensional architecture and their magnetic properties

Well-defined bimagnetic h-Co decorated wurtzite h-CoO nanotetrapods with uniform size have been successfully fabricated by a one-pot thermal decomposition method for the first time, and their three-dimensional architecture, crystal structure, chemical phase and exchange bias effect are characterized at the nanoscale. It is found that individual bimagnetic h-Co/h-CoO nanotetrapods are made of a h-CoO nanotetrapod skeleton to which multiple nanocrystals of ferromagnetic metallic h-Co are directly attached. The chemical analysis shows that the mass ratio of h-CoO and h-Co is 65 : 35. The detailed investigations of the crystal structure reveal that both the h-CoO nanotetrapod skeleton and h-Co nanoparticles have hexagonal structure. The four pods of individual nanotetrapods are single crystals with the same [001] orientation along with their pod axes and grow together by twinning with (110) the twin interface and the 120° spatial boundary angle. The magnetic measurements reveal that the h-Co/h-CoO nanotetrapods have a surprisingly strong room temperature ferromagnetism and there exists a weak exchange coupling between the h-CoO nanotetrapod skeleton and the decorated h-Co tiny nanoparticles. It is believed that our new structural form of the bimagnetic h-Co/h-CoO nanotetrapods provides not only a smart functional 3D nanoarchitecture as building block in nanoelectronics and nanosensors, but also an ideal specimen for a further understanding of weak antiferromagnetic-ferromagnetic interaction.

Efficient thermolysis route to monodisperse Cu₂ZnSnS₄ nanocrystals with controlled shape and structure

Monodisperse Cu₂ZnSnS₄ (CZTS) nanocrystals with tunable shape, crystalline phase, and composition are synthesized by efficient thermolysis of a single source precursor of mixed metal-oleate complexes in hot organic solvents with dissolved sulfur sources. Suitable tuning of the synthetic conditions and the Cu/(Zn + Sn) ratio of the precursor has enabled precise control of the crystalline phase in the form of kesterite, or a newly observed wurtzite structure. Nanocrystals with morphology in the form of spherical, rice-like, or rod-like shapes are obtained over a wide range of compositions (0.5 ≤ Cu/(Zn + Sn) ≤ 1.2). Both the final products and intermediates for each shape exhibit consistent composition and structure, indicating homogenous nucleation and growth of single-phase nanocrystals. Thin films prepared from colloidal nanocrystal suspensions display interesting shape-dependent photoresponse behavior under white light illumination from a solar simulator.

Shape-related optical and catalytic properties of wurtzite-type CoO nanoplates and nanorods

In this paper, we report the anisotropic optical and catalytic properties of wurtzite-type hexagonal CoO (h-CoO) nanocrystals, an unusual nanosized indirect semiconductor material. h-CoO nanoplates and nanorods with a divided morphology have been synthesized via facile solution methods. The employment of flash-heating and surfactant tri-n-octylphosphine favors the formation of plate-like morphology, whereas the utilization of cobalt stearate as a precursor is critical for the synthesis of nanorods. Structural analyses indicate that the basal plane of the nanoplates is (001) face and the growth direction of the nanorods is along the c axis. Moreover, the UV–vis absorption spectra, the corresponding energy gap and the catalytic properties are found to vary with the crystal shape and the dimensions of the as-prepared h-CoO nanocrystals. Furthermore, remarkable catalytic activities for H2 generation from the hydrolysis of alkaline NaBH4 solutions have been observed for the as-prepared h-CoO nanocrystals. The calculated Arrhenius activation energies show a decreasing trend with increasing extension degree along the <001> direction, which is in agreement with the variation of the charge-transfer energy gap. Finally the maximum hydrogen generation rate of the h-CoO nanoplates exceeds most of the reported values of transition metal or noble metal containing catalysts performing in the same reaction system, which makes them a low-cost alternative to commonly used noble metal catalysts in H2 generation from the hydrolysis of borohydrides, and might find potential applications in the field of green energy.

A versatile synthetic approach for the synthesis of CoO, CoxC, and Co based nanocomposites: tuning kinetics and crystal phase with different polyhydric alcohols

By changing the polyhydric alcohol and reaction time, the cobalt crystal phase can be manipulated and allow for control of the resulting magnetic properties.