From Carbon Dioxide to Methane: Homogeneous Reduction of Carbon Dioxide with Hydrosilanes Catalyzed by Zirconium−Borane Complexes

Reduction of CO2 in the presence of light via excited-state hydride transfer reaction in a NADPH-inspired derivative

The photo-catalytic reduction of CO2 into chemical feedstocks using solar energy has attracted vast interest in environmental science because of global warming. Based on our previous study on the CO2 complex with one of the benzimidazoline (BI) derivatives, we explore the photochemical reduction of CO2 in one of the benzimidazoline derivatives (1,3-dimethyl-5,6-diol-2,3-dihydro-1H-benzimidazole) by quantum-chemical methods. Our results reveal that carbon dioxide can be reduced to formate (HCOO-) by a hydride transfer reaction in the excited state of this complex of benzimidazoline derivative and CO2. While the ground-state hydride transfer reaction in this complex exhibits a substantial barrier, a charge-transfer can occur in the first singlet excited state of the complex in the UV-A region (326 nm), and after overcoming a moderate barrier (∼0.4 eV) the system can have access to the products. The interaction with a polar solvent decreases further the barrier such that the reaction in dimethyl sulfoxide can proceed with a negligibly small barrier (∼0.1 eV) or in a nearly barrierless manner. Our results show that this benzimidazoline derivative may act as a catalyst in the photoreduction of CO2.

Zinc-Catalyzed Hydroboration of Carbon Dioxide Amplified by Borane-Tethered Heteroscorpionate Bis(Pyrazolyl)methane Ligands

The borane-functionalized (BR2) bis(3,5-dimethylpyrazolyl)methane (LH) ligands 1a (BR2: 9-borabicyclo[3.3.1]nonane or 9-BBN), 1b (BR2: BCy2), and 1c (BR2: B(C6F5)2) were synthesized by the allylation-hydroboration of LH. Metalation of 1a,b with ZnCl2 yielded the heteroscorpionate dichloride complexes [(1a,b)ZnCl2] 3a,b. The reaction of 1a with ZnEt2 led to the formation of the zwitterionic complex [Et(1a)ZnEt(THF)] 5. The reaction of complex 3a with two equivalents of KHBEt3 under a carbon dioxide (CO2) atmosphere gave rise to the formation of the dimeric bis(formate) complex [(1a)Zn(OCHO)2]2 8, in which its borane moieties intermolecularly stabilize the formate ligands of opposite metal centers. The allylated precursor Lallyl and its zinc dichloride, diethyl and bis(formate) complexes [(Lallyl)ZnCl2] 2, [(Lallyl)ZnEt2] 4, and [(Lallyl)Zn(OCHO)2] 7 were also isolated. The catalyst systems composed of 1 mol % of 3a or 3b and two equivalents of KHBEt3 hydroborated CO2 at 1 bar with pinacolborane (HBPin) to the methanol-level product H3COBPin (and PinBOBPin) in yields of 42 or 86%, respectively. The catalyst systems using the unfunctionalized complex [(LH)ZnCl2] 6 and KHBEt3 or KHBEt3/nOctBR2 (BR2: 9-BBN or BCy2) hydroborated CO2 to H3COBPin but in 2.5- to 6-fold lower activities than those exhibited by 3a,b/KHBEt3. The hydroboration of CO2 using 8 as a catalyst led to yields of 39-43%, comparable to those obtained with 3a/KHBEt3. The results confirmed that the catalytic intermediates benefit from the incorporated boranes' intra- or intermolecular stabilizations.

Mechanism Insights into the Iridium(III)- and B(C6F5)3-Catalyzed Reduction of CO2 to the Formaldehyde Level with Tertiary Silanes

The catalytic system [Ir(CF3CO2)(κ2-NSiMe)2] [1; NSiMe = (4-methylpyridin-2-yloxy)dimethylsilyl]/B(C6F5)3 promotes the selective reduction of CO2 with tertiary silanes to the corresponding bis(silyl)acetal. Stoichiometric and catalytic studies evidenced that species [Ir(CF3COO-B(C6F5)3)(κ2-NSiMe)2] (3), [Ir(κ2-NSiMe)2][HB(C6F5)3] (4), and [Ir(HCOO-B(C6F5)3)(κ2-NSiMe)2] (5) are intermediates of the catalytic process. The structure of 3 has been determined by X-ray diffraction methods. Theoretical calculations show that the rate-limiting step for the 1/B(C6F5)3-catalyzed hydrosilylation of CO2 to bis(silyl)acetal is a boron-promoted Si-H bond cleavage via an iridium silylacetal borane adduct.

Light-driven reduction of CO2: thermodynamics and kinetics of hydride transfer reactions in benzimidazoline derivatives

CO₂ capture, conversion and storage belong to the holy grail of environmental science. We therefore explore an important photochemical hydride transfer reaction of benzimidazoline derivatives with CO₂ in a polar solvent (dimethylsulfoxide) by quantum-chemical methods. While the excited electronic state undergoing hydride transfer to formate (HCOO^-) shows a higher reaction path barrier compared to the ground state, a charge-transfer can occur in the near-UV region with nearly barrierless access to the products involving a conical intersection between both electronic states. Such radiationless decay through the hydride transfer reaction and formation of HCCO^-via excited electronic states in suitable organic compounds opens the way for future photochemical CO₂ reduction. We provide a detailed analysis for the chemical CO₂ reduction to the formate anion for 15 different benzimidazoline derivatives in terms of thermodynamic hydricities (ΔG_H^-), activation free energies (ΔG‡HT), and reaction free energies (ΔG_rxn) for the chosen solvent dimethylsulfoxide at the level of density functional theory. The calculated hydricities are in the range from 35.0 to 42.0 kcal mol^-1i.e. the species possess strong hydride donor abilities required for the CO₂ reduction to formate, characterized by relatively low activation free energies between 18.5 and 22.2 kcal mol^-1. The regeneration of the benzimidazoline can be achieved electrochemically.

Ferrocene tethered boramidinate frustrated Lewis pairs: stepwise capture of CO2 and CO

The synthesis and reactivity of novel ferrocene tethered boramidinate frustrated Lewis pairs (FLPs), capable of the sequential capture of small molecules, is reported. Reactions of 1,1'-dicarbodiimidoferrocenes with different boranes provides access to metallocene tethered FLPs. The reactivity of the boramidinate moieties can be tuned by the nature of the carbodiimido substituents (alkyl vs. aryl) and the borane used in the reduction (9-borabicyclo[3.3.1]nonane [(C₈H₁₄)₂BH]₂vs. bis-pentafluorophenyl borane [(C₆F₅)₂BH]₂). The boramidinate FLP arms do not engage in intramolecular reactions, allowing for independent small molecule capture by each FLP. By careful synthetic control, sequential capture of different gaseous small molecules (CO₂ and CO or CO₂ and CNtBu) by the same bis(boramidinate)ferrocene molecule has been demonstrated.

Catalytic reduction of carbon dioxide by a zinc hydride compound, [Tptm]ZnH, and conversion to the methanol level

The zinc hydride compound, [Tptm]ZnH, may achieve the reduction of CO₂ by (RO)₃SiH (R = Me, Et) to the methanol oxidation level, (MeO)_xSi(OR)_4-x, via the formate species, HCO₂Si(OR)₃. However, because insertion of CO₂ into the Zn-H bond is more facile than insertion of HCO₂Si(OR)₃, conversion of HCO₂Si(OR)₃ to the methanol level only occurs to a significant extent in the absence of CO₂.

Activation of Si–H and B–H bonds by Lewis acidic transition metals and p-block elements: same, but different

In this Perspective we discuss the ability of transition metal complexes to activate and cleave the Si–H and B–H bonds of hydrosilanes and hydroboranes (tri- and tetra-coordinated) in an electrophilic manner, avoiding the need for the metal centre to undergo two-electron processes (oxidative addition/reductive elimination). A formal polarization of E–H bonds (E = Si, B) upon their coordination to the metal centre to form σ-EH complexes (with coordination modes η¹ or η²) favors this type of bond activation that can lead to reactivities involving the formation of transient silylium and borenium/boronium cations similar to those proposed in silylation and borylation processes catalysed by boron and aluminium Lewis acids. We compare the reactivity of transition metal complexes and boron/aluminium Lewis acids through a series of catalytic reactions in which pieces of evidence suggest mechanisms involving electrophilic reaction pathways.

In this Perspective we compare the ability of transition metals and p-block Lewis acids to activate electrophilically hydrosilanes and hydroboranes. The mechanistic similarities and dissimilarities in different catalytic transformations are analyzed.

Hydrosilylative reduction of carbon dioxide by a homoleptic lanthanum aryloxide catalyst with high activity and selectivity

An efficient tandem hydrosilylation of CO2, which uses a combination of a simple, homoleptic lanthanum aryloxide and B(C6F5)3, was performed. Use of a less sterically hindered silane led to an exclusive reduction of CO2 to CH4, with a turnover frequency of up to 6000 h-1 at room temperature. The catalytic system is robust, and 19 400 turnovers could be achieved with 0.005 mol% loading of lanthanum. The reaction outcome depended highly on the nature of the silane reductant used. Selective production of the formaldehyde equivalent, i.e., bis(silyl)acetal, without over-reduction, was observed when a sterically bulky silane was used. The reaction mechanism was elucidated by stoichiometric reactions and DFT calculations.

Reaction of a Molybdenum Bis(dinitrogen) Complex with Carbon Dioxide: A Combined Experimental and Computational Investigation

Refluxing Mo(CO)₆ in the presence of the phosphine-functionalized α-diimine ligand ^Ph2PPrDI allowed for substitution and formation of the dicarbonyl complex, (^Ph2PPrDI)Mo(CO)₂. Oxidation with I₂ followed by heating resulted in further CO dissociation and isolation of the corresponding diiodide complex, (^Ph2PPrDI)MoI₂. Reduction of this complex under a N₂ atmosphere afforded the corresponding bis(dinitrogen) complex, (^Ph2PPrDI)Mo(N₂)₂. The solid-state structures of all three compounds were found to feature a tetradentate chelate and cis-monodentate ligands. Notably, the addition of CO₂ to (^Ph2PPrDI)Mo(N₂)₂ is proposed to result in head-to-tail CO₂ coupling to generate the corresponding metallacycle and ultimately a mixture of (^Ph2PPrDI)Mo(CO)₂ and the bis(oxo) dimer, [(κ³-^Ph2PPrDI)Mo(O)(μ-O)]₂. Computational studies have been performed to gain insight into the reaction and evaluate the importance of cis-coordination sites for selective head-to-tail CO₂ reductive coupling, CO deinsertion, disproportionation, and stepwise CO₂ deinsertion.

CO2 hydrogenation over functional nanoporous polymers and metal-organic frameworks

CO₂ is one of the major environmental pollutants and its mitigation is attracting huge attention over the years due to continuous increase in this greenhouse gas emission in the atmosphere. Being environmentally hazardous and plentiful presence in nature, CO₂ utilization as C1 resource into fuels and feedstock is very demanding from the green chemistry perspectives. To accomplish this CO₂ utilization issue, functional organic materials like porous organic polymers (POPs), covalent organic frameworks (COFs) as well as organic-inorganic hybrid materials like metal-organic frameworks (MOFs), having characteristics of large surface area, high thermal stability and tunability in the porous nanostructures play significant role in designing the suitable catalyst for the CO₂ hydrogenation reactions. Although CO₂ hydrogenation is a widely studied and emerging area of research, till date review exclusively focused on designing POPs, COFs and MOFs bearing reactive functional groups is very limited. A thorough literature review on this matter will enrich our knowledge over the CO₂ hydrogenation processes and the catalytic sites responsible for carrying out these chemical transformations. We emphasize recent state-of-the art developments in POPs/COFs/MOFs having unique functionalities and topologies in stabilizing metallic NPs and molecular complexes for the CO₂ reduction reactions. The major differences between MOFs and porous organics are critically summarized in the outlook section with the aim of the future benefit in mitigating CO₂ emission from ambient air.

Optical Hot Spot Generation by the Plasmonic Coupling of Au Nanoparticles in the Nanospaces of Mesoporous Titanium(IV) Oxide

An in situ reduction technique consisting of chemisorption of 1,3,5,7-tetramethylcyclotetrasiloxane (TMCTS) and subsequent reaction with HAuCl₄ has been developed for depositing Au nanoparticles (NPs) uniformly in the depth direction of a mesoporous TiO₂ nanocrystalline film (Au/TMCTS/mp-TiO₂). The TMCTS monolayer is further converted into silicon oxide by heating in the air (Au/SiO_x/mp-TiO₂). In the absorption spectra of Au/SiO_x/mp-TiO₂ prepared at varying HAuCl₄ concentrations (C), the localized surface plasmon resonance (LSPR) band of Au NPs significantly broadens C ≈ 1.22 mM at 546 nm to be split into two peaks around 500 and 700 nm at C ≥ 2.43 mM, whereas such a phenomenon is not observed for the usual Au NP-loaded TiO₂ particles. Three-dimensional-finite difference time domain simulations showed that the unique optical property of Au/SiO_x/mp-TiO₂ stems from the effective LSPR coupling of very close Au NPs and partial fusions in the nanospaces of mp-TiO₂. Further, the optical hot spots in Au/TMCTS/mp-TiO₂ as well as Au/SiO_x/mp-TiO₂ generate an intense local electric field giving increase to a great enhancement of the absorption in the infrared spectrum of the TMCTS monolayer on mp-TiO₂.

More Than Just a Reagent: The Rise of Renewable Organohydrides for Catalytic Reduction of Carbon Dioxide

Stoichiometric carbon dioxide reduction to highly reduced C1 molecules, such as formic acid (2e^- ), formaldehyde (4e^- ), methanol (6e^- ) or even most-reduced methane (8e^- ), has been successfully achieved by using organosilanes, organoboranes, and frustrated Lewis Pairs (FLPs) in the presence of suitable catalyst. The development of renewable organohydride compounds could be the best alternative in this regard as they have shown promise for the transfer of hydride directly to CO₂ . Reduction of CO₂ by two electrons and two protons to afford formic acid by using renewable organohydride molecules has recently been investigated by various groups. However, catalytic CO₂ reduction to ≥2e^- -reduced products by using renewable organohydride-based molecules has rarely been explored. This Minireview summarizes important findings in this regard, encompassing both stoichiometric and catalytic CO₂ reduction.

Partnering a Three-Coordinate Gallium Cation with a Hydroborate Counter-Ion for the Catalytic Hydrosilylation of CO2

A novel β-diketiminate stabilized gallium hydride, (^Dipp L)Ga(Ad)H (where (^Dipp L)={HC(MeCDippN)₂ }, Dipp=2,6-diisopropylphenyl and Ad=1-adamantyl), has been synthesized and shown to undergo insertion of carbon dioxide into the Ga-H bond under mild conditions. In this case, treatment of the resulting κ¹ -formate complex with triethylsilane does not lead to regeneration of the hydride precursor. However, when combined with B(C₆ F₅ )₃ , (^Dipp L)Ga(Ad)H catalyses the reductive hydrosilylation of CO₂ . Under stoichiometric conditions, the addition of one equivalent of B(C₆ F₅ )₃ to (^Dipp L)Ga(Ad)H leads to the formation of a 3-coordinate cationic gallane complex, partnered with a hydroborate anion, [(^Dipp L)Ga(Ad)][HB(C₆ F₅ )₃ ]. This complex rapidly hydrometallates carbon dioxide and catalyses the selective reduction of CO₂ to the formaldehyde oxidation level at 60 °C in the presence of Et₃ SiH (yielding H₂ C(OSiEt₃ )₂ ). When catalysis is undertaken in the presence of excess B(C₆ F₅ )₃ , appreciable enhancement of activity is observed, with a corresponding reduction in selectivity: the product distribution includes H₂ C(OSiEt₃ )₂ , CH₄ and O(SiEt₃ )₂ . While this system represents proof-of-concept in CO₂ hydrosilylation by a gallium hydride system, the TOF values obtained are relatively modest (max. 10 h^-1 ). This is attributed to the strength of binding of the formatoborate anion to the gallium centre in the catalytic intermediate (^Dipp L)Ga(Ad){OC(H)OB(C₆ F₅ )₃ }, and the correspondingly slow rate of the turnover-limiting hydrosilylation step. In turn, this strength of binding can be related to the relatively high Lewis acidity measured for the [(^Dipp L)Ga(Ad)]⁺ cation (AN=69.8).

C-Methylenation of anilines and indoles with CO2 and hydrosilane using a pentanuclear zinc complex catalyst

The one-step C-methylenation of anilines and indoles with CO2 and phenylsilane was catalyzed by a pentanuclear ZnII complex to give diarylmethanes via geminal C-H and C-C bond formation. It is proposed that the zinc-hydride complex generated in situ is a catalytically active species and that bis(silyl)acetal is a key intermediate. When aniline was used as a substrate, both the C-methylenation and N-methylation proceeded.

What Fluorine Can Do in CO2 Chemistry: Applications from Homogeneous to Heterogeneous Systems

CO₂ chemistry including capture and fixation has attracted great attention towards the aim of reducing the consumption of fossil fuels and CO₂ accumulation in the atmosphere. "CO₂ -philic" materials are required to achieve good performance owing to the intrinsic properties of the CO₂ molecule, that is, thermodynamic stability and kinetic inertness. In this respect, fluorinated materials have been deployed in CO₂ capture (physical and chemical pathway) or fixation (thermo- and electrocatalytic procedure) with good performances, including homogeneous (e. g., ionic liquids and small organic molecules) and heterogeneous counterparts (e. g., carbons, porous organic polymers, covalent triazine frameworks, metal-organic frameworks, and membranes). In this Minireview, these works are summarized and analyzed from the aspects of (1) the strategy used for fluorine introduction, (2) characterization of the targeted materials, (3) performance of the fluorinated systems in CO₂ chemistry, and comparison with the nonfluorinated counterparts, (4) the role of fluorinated functionalities in the working procedure, and (5) the relationship between performance and structural/electronic properties of the materials. The systematic summary in this Minireview will open new opportunities in guiding the design of "CO₂ -philic" materials and pave the way to stimulate further progress in this field.

Controlling the Product Platform of Carbon Dioxide Reduction: Adaptive Catalytic Hydrosilylation of CO2 Using a Molecular Cobalt(II) Triazine Complex

The catalytic reduction of carbon dioxide (CO2 ) is considered a major pillar of future sustainable energy systems and chemical industries based on renewable energy and raw materials. Typically, catalysts and catalytic systems are transforming CO2 preferentially or even exclusively to one of the possible reduction levels and are then optimized for this specific product. Here, we report a cobalt-based catalytic system that enables the adaptive and highly selective transformation of carbon dioxide individually to either the formic acid, the formaldehyde, or the methanol level, demonstrating the possibility of molecular control over the desired product platform.

Catalytic Synthesis of Oligosiloxanes Mediated by an Air Stable Catalyst, (C6F5)3B(OH2)

The utility of (C₆F₅)₃B(OH₂) as catalyst for the simple and environmentally benign synthesis of oligosiloxanes directly from hydrosilanes, is reported. This protocol offers several advantages compared to other methods of synthesizing siloxanes, such as mild reaction conditions, low catalyst loading, and a short reaction time with high yields and purity. The considerable H₂O-tolerance of (C₆F₅)₃B(OH₂) promoted a catalytic route to disiloxanes which showed >99% conversion of three tertiary silanes, Et₃SiH, PhMe₂SiH, and Ph₃SiH. Preliminary data on the synthesis of unsymmetrical disiloxanes (Si-O-Si') suggests that by modifying the reaction conditions and/or using a 1:1 combination of silane to silanol the cross-product can be favored. Intramolecular reactions of disilyl compounds with catalytic (C₆F₅)₃B(OH₂) led to the formation of novel bridged siloxanes, containing a Si-O-Si linkage within a cyclic structure, as the major product. Moreover, the reaction conditions enabled recovery and recycling of the catalyst. The catalyst was re-used 5 times and demonstrated excellent conversion for each substrate at 1.0 mol% catalyst loading. This seemingly simple reaction has a rather complicated mechanism. With the hydrosilane (R₃SiH) as the sole starting material, the fate of the reaction largely depends on the creation of silanol (R₃SiOH) from R₃SiH as these two undergo dehydrocoupling to yield a disiloxane product. Generation of the silanol is based on a modified Piers-Rubinsztajn reaction. Once the silanol has been produced, the mechanism involves a series of competitive reactions with multiple catalytically relevant species involving water, silane, and silanol interacting with the Lewis acid and the favored reaction cycle depends on the concentration of various species in solution.

A Resin-Supported Formate Catalyst for the Transformative Reduction of Carbon Dioxide with Hydrosilanes

A heterogeneous formate anion catalyst for the transformative reduction of carbon dioxide (CO₂ ) based on a polystyrene and divinylbenzene copolymer modified with alkylammonium formate was prepared from a widely available anion exchange resin. The catalyst preparation was easy and the characterization was carried out by using elemental analysis, Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and solid-state ¹³ C cross-polarization/magic-angle spinning nuclear magnetic resonance (¹³ C CP/MAS NMR) spectroscopy. The catalyst displayed good catalytic activity for the direct reduction of CO₂ with hydrosilanes, tunably yielding silylformate or methoxysilane products depending on the hydrosilanes used. The catalyst was also active for the reductive insertion of CO₂ into both primary and secondary amines. The catalytic activity of the resin-supported formate can be predicted from the FTIR spectra of the catalyst, probably because of the difference in the ionic interaction strength between the supported alkylammonium cations and formate anions. The ion pair density is thought to influence the catalytic activity, as shown by the elemental and solid-state ¹³ C NMR analyses.

The next big thing for silicon nanostructures – CO2 photocatalysis

Silicon nanostructures for the catalytic conversion of CO₂ to value-added products.

A catalytic study of water dispersed gold nanoparticles for the hydrolytic oxidation of diorganosilanes – en route formation of a Pickering catalyst and synthesis of tetraorganodisiloxane-1,3-diols

This study unfolds the formation of a AuNP-stabilized Pickering catalyst (PIC) en route to the hydrolytic oxidation of diorganosilanes. The method offers a viable route for the synthesis of disiloxane-1,3-diols.

Tandem deoxygenative hydrosilation of carbon dioxide with a cationic scandium hydridoborate and B(C6F5)3

A scandium hydridoborate complex supported by the dianionic pentadentate ligand B₂Pz₄Py is prepared via hydride abstraction from the previously reported scandium hydride complex with tris-pentafluorophenyl borane.

Triazinetriamine-derived porous organic polymer-supported copper nanoparticles (Cu-NPs@TzTa-POP): an efficient catalyst for the synthesis of N-methylated products via CO2 fixation and primary carbamates from alcohols and urea

Copper nanoparticles incorporated triazinetriamine derived porous organic polymer based catalyst was synthesized for catalytic production N-methylated amines and primary carbamates.

Bis(alkyl) scandium and yttrium complexes coordinated by an amidopyridinate ligand: synthesis, characterization and catalytic performance in isoprene polymerization, hydroelementation and carbon dioxide hydrosilylation

Highly versatile and robust organolanthanides as catalysts or catalyst precursors for a variety of challenging transformations.

One-Step Direct Fixation of Atmospheric CO2 by Si-H Surface in Solution

The efficient conversion of carbon dioxide (CO₂) into useful chemicals has important practical significance for environmental protection. Until now, direct fixation of atmospheric CO₂ needs first extraction from the atmosphere, an energy-intensive process. Silicon (or Si-H surface), Earth-abundant, low-cost and non-toxic, is a promising material for heterogeneous CO₂ chemical fixation. Here we report one-step fixing of CO₂ directly from the atmosphere to a paraformaldehyde-like polymer by Si-H surface at room temperature. With the assistance of HF, commercial silicon powder was used as a heterogeneous reducing agent, for converting gaseous CO₂ to a polymer of fluorine substituted polyoxymethylene and hydroxyl substituted polyoxymethylene alternating copolymer (F-POM). Making use of the Si-H surface toward the fixation of atmospheric gaseous CO₂ is a conceptually distinct and commercially interesting strategy for making useful chemicals and environmental protection.

•

Atmospheric CO₂ is fixed with HF-treated silicon powders via one-step method

•

The product is fluorine substituted polymer (F-POM)

•

The fixation process is monitored by in situ infrared studies and mass spectra

•

The mechanism on the direct CO₂ fixation by Si-H surface is proposed

Diverse Catalytic Systems and Mechanistic Pathways for Hydrosilylative Reduction of CO2

Catalytic hydrosilylation of carbon dioxide has emerged as a promising approach for carbon dioxide utilization. It allows the reductive transformation of carbon dioxide into value-added products at the levels of formate, formaldehyde, methanol, and methane. Tremendous progress has been made in the area of carbon dioxide hydrosilylation since the first reports in 1981. This focus review describes recent advances in the design and catalytic performance of leading catalyst systems, including transition-metal, main-group, and transition-metal/main-group and main-group/main-group tandem catalysts. Emphasis is placed on discussions of key mechanistic features of these systems and efforts towards the development of more selective, efficient, and sustainable carbon dioxide hydrosilylation processes.

Synthesis of Polypropylene via Catalytic Deoxygenation of Poly(methyl acrylate)

We propose the defunctionalization of vinyl polymers as a strategy to access previously inaccessible polyolefin materials. By utilizing B(C₆F₅)₃-catalyzed deoxygenation in the presence of silane, we demonstrate that eliminating the pendent ester in poly(methyl acrylate) effectively leaves a linear hydrocarbon polymer with methyl pendants, which is polypropylene. We further show that a polypropylene-b-polystyrene diblock copolymer and a polystyrene-b-polypropylene-b-polystyrene triblock copolymer can be successfully derived from the poly(methyl acrylate)-containing block polymer precursors and exhibit quite distinct materials properties due to their chemical transformation. This unique postpolymerization modification methodology, which goes beyond the typical functional group conversion, can offer access to a diverse range of unprecedented polyolefin block polymers with a variable degree of functional groups.

Ir-catalyzed selective reduction of CO2 to the methoxy or formate level with HSiMe(OSiMe3)2

Ir-NSi-based catalysts allow controlling the selective reduction of CO₂ with HSiMe(OSiMe₃)₂ to afford methoxysilane or silyl formate.

A ruthenium porphyrin-based porous organic polymer for the hydrosilylative reduction of CO2 to formate

A ruthenium-based porous organic polymer is constructed and used to reduce CO₂ to potassium formate.