A surface functional monomer-directing strategy for highly dense imprinting of TNT at surface of silica nanoparticles

Molecularly imprinted polymers for sensing/depleting human serum albumin (HSA): A critical review of recent advances and current challenges

Human serum albumin (HSA) is an essential biomacromolecule in the blood circulatory system because it carries numerous molecules, including fatty acids (FAs), bilirubin, metal ions, hormones, and different pharmaceuticals, and plays a significant role in regulating blood osmotic pressure. Fluctuations in HSA levels in human biofluids, particularly urine and serum, are associated with several disorders, such as elevated blood pressure, diabetes mellitus (DM), liver dysfunction, and a wide range of renal diseases. Thus, the ability to quickly and accurately measure HSA levels is important for the rapid identification of these disorders in human populations. Molecularly imprinted polymers (MIPs), well known as artificial antibodies (Abs), have been extensively used for the quantitative detection of small molecules and macromolecules, especially HSA, in recent decades. This review highlights major challenges and recent developments in the application of MIPs to detect HSA in artificial and real samples. The fabrication and application of various MIPs for the depletion of HSA are also discussed, as well as different MIP preparation approaches and strategies for overcoming obstacles that hinder the development of MIPs with high efficiency and recognition capability for HSA determination/depletion.

A novel core-shell composite of PCN-222@MIPIL for ultrasensitive electrochemical sensing 4-nonylphenol

A novel core-shell composite of PCN-222 and molecularly imprinted poly (ionic liquid) (PCN-222@MIPIL) with high conductivity and selectivity was prepared for electrochemical sensing 4-nonylphenol (4-NP). The electrical conductivities of some MOFs including PCN-222, ZIF-8, NH₂-UIO-66, ZIF-67, and HKUST-1 were explored. The results indicated that PCN-222 had the highest conductivity and was then used as a novel imprinted support. PCN-222@MIPIL with core-shell and porous structure was synthesized using PCN-222 as support and 4-NP as template. The average pore volume of PCN-222@MIPIL was 0.085 m³ g^-1. In addition, the average pore width of PCN-222@MIPIL was from 1.1 to 2.7 nm. The electrochemical response for PCN-222@MIPIL sensor for 4-NP was 2.54, 2.14, and 4.24 times that of non-molecularly imprinted poly (ionic liquid) (PCN-222@NIPIL), PCN-222, and MIPIL sensors, respectively, which result from superior conductivity and imprinted recognition sites of PCN-222@MIPIL. The current response of PCN-222@MIPIL sensor to 4-NP concentration from 1 × 10^-4 to 10 μM presented an excellent linear relationship. The detection limit of 4-NP was 0.03 nM. The synergistic effect between the PCN-222 supporter with high conductivity, specific surface area and shell layer of surface MIPIL results in the outstanding performance of PCN-222@MIPIL. PCN-222@MIPIL sensor was adopted for detecting 4-NP in real samples and presented to be a reliable approach for determining 4-NP.

Fabrication of flexible AuNPs@ polyimide heating chips for in situ explosives SERS sensing in nature samples

In this study, highly sensitive flexible AuNPs@ polyimide SERS heating chips (APHC) were fabricated for in situ collecting and detecting TNT. Large-scale AuNPs arrays were synthesized by liquid-liquid interface self-assembly and transferred to polyimide heating film as SERS substrates. 4-ATP and AgNPs functionalized on APHC were used as capture means and signal amplifiers, combining with TNT to form the AuNPs-TNT-AgNPs "sandwich" structure. This flexible APHC chip showed high sensitivity as enhancement factor was 5.5×10⁵, and good repeatability and stability (RSD<10%). It was applied to detect TNT solutions with a low concentration of 10^-9 M, and showed a good linear response in the range from 10^-5 to 10^-9 M (R² = 0.986). In addition, the detection method also had good selectivity and no response to various TNT analogs. More important, combing with the thermal enrichment strategy, TNT dispersed in environmental samples such as soil, fruit and clothing would be enriched as vapor then collected and detected by APHC. This APHC device shows great potential for in situ sensing platforms, due to its sensitivity, high efficiency, and excellent portability.

Molecularly Imprinted Polymer-Based Luminescent Chemosensors

Molecularly imprinted polymer (MIP)-based luminescent chemosensors combine the advantages of the highly specific molecular recognition of the imprinting sites and the high sensitivity with the luminescence detection. These advantages have drawn great attention during the past two decades. Luminescent molecularly imprinted polymers (luminescent MIPs) towards different targeted analytes are constructed with different strategies, such as the incorporation of luminescent functional monomers, physical entrapment, covalent attachment of luminescent signaling elements on the MIPs, and surface-imprinting polymerization on the luminescent nanomaterials. In this review, we will discuss the design strategies and sensing approaches of luminescent MIP-based chemosensors, as well as their selected applications in biosensing, bioimaging, food safety, and clinical diagnosis. The limitations and prospects for the future development of MIP-based luminescent chemosensors will also be discussed.

Constructing a Ring-like Self-Aggregation SERS Sensor with the Coffee Ring Effect for Ultrasensitive Detection and Photocatalytic Degradation of the Herbicides Paraquat and Diquat

A strategy for building ring-like deposit surface-enhanced Raman scattering (SERS) sensors with the coffee ring effect through the functional modification of the silica nanoparticle surface encapsulated by free-tagged Ag nanoparticles is addressed along with their applications in the SERS-based detection and degradation of target species, including paraquat, diquat, and their free radicals. The nanogap formed by two interparticles with SERS hotspots provides a gigantic amplification signal for the Raman scattering intensity of the analyte molecule located approximately at the hotspots. The enhanced Raman spectrum signals of these target analytes were achieved through the hotspot region of the surface plasmon resonance (SPR) located on the embankment formed by self-aggregation of SiO₂@Ag nanoparticles due to the coffee ring effect. Meanwhile, the intrinsic properties of Ag nanoparticles embedded onto the silica surface were applied to photocatalytically degrade the target analytes by harvesting energy from sunlight. The SERS sensor detected the analytes down to 10^-9 M in the aqueous solution.

Composite Hydrogel Microspheres Encapsulating Hollow Mesoporous Imprinted Nanoparticles for Selective Capture and Separation of 2′-Deoxyadenosine

Hollow mesoporous silica nanoparticles have been widely applied as a carrier material in the molecular imprinting process because of their excellent properties, with high specific surface area and well-defined active centers. However, these kinds of materials face the inevitable problem that they have low mass transfer efficiency and cannot be conveniently recycled. In order to solve this problem, this work has developed a composite hydrogel microsphere (MMHSG) encapsulated with hollow mesoporous imprinted nanoparticles for the selective extraction of 2’-deoxyadenosine (dA). Subsequently, the hollow mesoporous imprinted polymers using dA as template molecule and synthesized 5-(2-carbomethoxyvinyl)-2′-deoxyuridine (AcrU) as functional monomer were encapsulated in hydrogel. MMHSG displayed good performance in specifically recognizing and quickly separating dA, whereas no imprinting effect was observed among 2′-deoxyguanosine (dG), deoxycytidine (dC), or 5′-monophosphate disodium salt (AMP). Moreover, the adsorption of dA by MMHSG followed chemisorption and could reach adsorption equilibrium within 60 min; the saturation adsorption capacity was 20.22 μmol·g−1. The introduction of AcrU could improve selectivity through base complementary pairing to greatly increase the imprinting factor to 3.79. Therefore, this was a successful attempt to combine a hydrogel with hollow mesoporous silica nanoparticles and molecularly imprinted material.

Bio-Inspired Imprinting Materials for Biomedical Applications

Inspired by the recognition mechanism of biological molecules, molecular imprinting techniques (MITs) are imparted with numerous merits like excellent stability, recognition specificity, adsorption properties, and easy synthesis processes, and thus broaden the avenues for convenient fabrication protocol of bio-inspired molecularly imprinted polymers (MIPs) with desirable functions to satisfy the extensive demands of biomedical applications. Herein, the recent research progress made with respect to bio-inspired imprinting materials is discussed in this review. First, the underlying mechanism and basic components of a typical molecular imprinting procedure are briefly explored. Then, emphasis is put on the introduction of diverse MITs and novel bio-inspired imprinting materials. Following these two sections, practical applications of MIPs in the field of biomedical science are focused on. Last but not least, perspectives on the remaining challenges and future development of bio-inspired imprinting materials are presented.

Impedimetric detection of 2,4,6-trinitrotoluene using surface-functionalized halloysite nanotubes

Herein, we report the application of amine-surface-functionalized halloysite nanotubes (HAs) as active materials for the quantitative detection of 2,4,6-trinitrotoluene (TNT). The findings indicated that HA could selectively capture TNT via a strong reaction between the amine groups on its surface and the TNT molecules. Plate electrodes were fabricated from HA to evaluate its TNT-sensing capacity by electrochemical impedance spectroscopy. Upon binding with TNT, the proton conductivity on the HA plate electrodes increased linearly with the TNT concentration from 1.0 × 10⁻¹¹ M to 1.0 × 10⁻⁴ M. The HA plate electrodes exhibited good sensitivity with a detection limit of 1.05 × 10⁻¹² M. Subsequently, the cycling measurements of the TNT binding/removal were performed on the HA plate electrode, and the material exhibited high stability, good regenerative ability, and good reversibility without a significant decrease in efficiency. The present work highlights the significant application potential of HAs for the electrochemical detection of TNT.

Amine-surface-functionalized halloysite nanotubes are used for electrochemical sensing TNT.

Multifunctional Molecularly Imprinted Receptor-Based Polymeric Membrane Potentiometric Sensor for Sensitive Detection of Bisphenol A

Molecularly imprinted polymer (MIP)-based polymeric membrane potentiometric sensors have become an attractive tool for detection of organic species. However, the MIP receptors in potentiometric sensors developed so far are usually prepared by only using single functional monomers. This may lead to low affinities of the MIP receptors due to the lack of diversity of the functional groups, thus resulting in low detection sensitivity of the potentiometric sensors. Additionally, these classical MIP receptors are nonconductive polymers, which are undesirable for the fabrication of an electrochemical sensor. Herein, we describe a novel multifunctional MIP receptor-based potentiometric sensor. The multifunctional MIP receptor is prepared by using two functional monomers, methacrylic acid, and 3-vinylaniline with a dual functionality of both recognition and conduction properties. The poly(aniline) groups are introduced into the methacrylic acid-based MIP by postoxidation of the aniline monomer. Such poly(aniline) groups not only serve as the additional functional groups for selective recognition, but also work as a conducting polymer. The obtained multifunctional MIP receptor shows a high binding capacity and an excellent electron-transfer ability. By using bisphenol A as a model, the proposed multifunctional MIP sensor exhibits a largely improved sensitivity and low noise levels compared to the conventional MIP sensor. We believe that the proposed MIP-based sensing strategy provides a general and facile way to fabricate sensitive and selective MIP-based electrochemical sensors.

Development and critical evaluation of a novel fluorescent nanosensor based on a molecularly imprinted polymer for the rapid detection of procymidone in ginseng

Effective methods are required to quantify the organochlorine pesticide procymidone due to its potentially harmful effects toward human health and the environment.

Nanostructured Shell-Layer Artificial Antibody with Fluorescence-Tagged Recognition Sites for the Trace Detection of Heavy Metal Ions by Self-Reporting Microsensor Arrays

Herein, a strategy for a metal ion-imprinted artificial antibody with recognition sites tagged by fluorescein was carried out to construct the selective sites with a sensitive optical response signal to the specific metal ion. The synthesized silica nanoparticles were modified by the derivative residue group of 3-aminopropyltriethoxysilane conjugated with a 4-chloro-7-nitro-1,2,3-benzoxadiazole (NBD-Cl) molecule through the hydrolysis and condensation reactions. The as-prepared silica nanoparticles were encapsulated by metal ion (Cu²⁺, Cd²⁺, Hg²⁺, and Pb²⁺)-imprinted polymers with nanostructured layers through the copolymerization of ethyl glycol dimethyl methacrylate (EGDMA) as a cross-linker, AIBN as an initiator, metal ions as template molecules, AA as a functional monomer, and acetonitrile as a solvent. The layers of molecular imprinted polymers (MIPs) with a core-shell structure removed template molecules by EDTA-2Na to retain the cavities and spatial sizes to match the imprinted metal ions. The microsensor arrays were achieved by the self-assembly technique of SiO₂@MIP nanoparticles on the etched silicon wafer with regular dot arrays. The nanostructured-shell layers with fluorescence-tagged recognition sites rebound metal ions by the driving force of concentration difference demonstrates the high selective recognition and sensitive detection to heavy metal ions through the decline of fluorescence intensity. The LOD concentration for four metal ions is down to 10^-9 mol·L^-1. The method will provide biomimetic synthesis, analyte screen, and detection of highly dangerous materials in the environment for theoretical foundation and technological support.

Tailor made magnetic nanolights: fabrication to cancer theranostics applications

Nanoparticles having magnetic and fluorescent properties could be considered as a gift to materials scientists due to their unique magneto-optical qualities. Multiple component particles can overcome challenges related with a single component and unveil bifunctional/multifunctional features that can enlarge their applications in diagnostic imaging agents and therapeutic delivery vehicles. Bifunctional nanoparticles that have both luminescent and magnetic features are termed as magnetic nanolights. Herein, we present recent progress of magneto-fluorescent nanoparticles (quantum dots based magnetic nanoparticles, Janus particles, and heterocrystalline fluorescent magnetic materials), comprehensively describing fabrication strategies, types, and biomedical applications. In this review, our aim is not only to encompass the preparation strategies of these special types of magneto-fluorescent nanomaterials but also their extensive applications in bioimaging techniques, cancer therapy (targeted and hyperthermic), and sustained release of active agents (drugs, proteins, antibodies, hormones, enzymes, growth factors).

A comparative study of photoresponsive molecularly imprinted polymers with different shell thicknesses: Effects on 6-O-α-maltosyl-β-cyclodextrin separation

Photoresponsive surface molecularly imprinted polymers (PSMIPs) with controlled nanoshell thicknesses were synthesized using different amounts of precursor materials to determine the effects of polymer shell layer thickness on the separation and purification of 6-O-alpha-maltosyl-beta-cyclodextrin (Mal-β-CD). The physicochemical properties and adsorption and desorption capacities of PSMIPs with different shell thicknesses were studied. Interestingly, the uniform thickness of the imprinted polymer shell layer could be adjusted from 10 to 60 nm by varying the amount of polymerization precursors, and the average mesopore diameter of PSMIPs was not significantly affected by shell thickness. However, the removal efficiency and selective capacity of PSMIPs on Mal-β-CD were strongly correlated to their shell thickness. The adsorption behavior of PSMIPs on Mal-β-CD fitted well with the Langmuir adsorption model and pseudo-second-order kinetic model. Based on the obtained results, PSMIPs with a 30-nm imprinted layer were found to be an excellent adsorbent for Mal-β-CD separation, with an adsorption capacity of 18.12 mg/g. They can therefore be used for industrial chromatographic separations of Mal-β-CD in the future. PRACTICAL APPLICATION: This article clearly demonstrated that the shell thickness of core-shell molecularly imprinted materials affected the degree and rate of cyclodextrin separation. Determining the optimal thickness is of great significance for the material in the separation and purification of cyclodextrin.

Molecularly imprinted fluoroprobes doped with Ag nanoparticles for highly selective detection of oxytetracycline in real samples

A molecularly imprinted polymer (MIP), which is synthesized by a nanomolding process around a template, has emerged as a promising analytical tool for environmental quality monitoring and food safety test. In this work, a fluoroprobe with Ag-doped MIP nanolayer (16 nm thickness) is successfully prepared for the highly selective detection of oxytetracycline (OTC) in real samples (i.e. Yangtze River water, swine urine). In the MIP nanolayer, two functional monomers (i.e. 4-(2-acrylamidoethylcarbamoyl)-3-fluorophenylboronic acid, methacrylic acid) synergistically constitute the specific recognition sites. Meanwhile, the doped Ag enhances the detection sensitivity (with a detection limit of 5.38 nM) and accelerates the detection rate (within 2.5 min) even in real samples. Therefore, the present study paves the way for the preparation of MIP-based fluoroprobes, showing great prospects in environmental quality and food safety tests.

Ion-Imprinted Polymers: Synthesis, Characterization, and Adsorption of Radionuclides

Growing concern over the hazardous effect of radionuclides on the environment is driving research on mitigation and deposition strategies for radioactive waste management. Currently, there are many techniques used for radionuclides separation from the environment such as ion exchange, solvent extraction, chemical precipitation and adsorption. Adsorbents are the leading area of research and many useful materials are being discovered in this category of radionuclide ion separation. The adsorption technologies lack the ability of selective removal of metal ions from solution. This drawback is eliminated by the use of ion-imprinted polymers, these materials having targeted binding sites for specific ions in the media. In this review article, we present recently published literature about the use of ion-imprinted polymers for the adsorption of 10 important hazardous radionuclides-U, Th, Cs, Sr, Ce, Tc, La, Cr, Ni, Co-found in the nuclear fuel cycle.

Enabling the Selective Detection of Endocrine-Disrupting Chemicals via Molecularly Surface-Imprinted "Coffee Rings"

Molecularly imprinted polymers (MIPs) represent an intriguing class of synthetic materials that can selectively recognize and bind chemical or biological molecules in a variety of value-added applications in sensors, catalysis, drug delivery, antibodies, and receptors. In this context, many advanced methods of implementing functional MIP materials have been actively studied. Herein, we report a robust strategy to produce highly ordered arrays of surface-imprinted polymer patterns with unprecedented regularity for MIP-based sensor platform, which involves the controlled evaporative self-assembly process of MIP precursor solution in a confined geometry consisting of a spherical lens on a flat Si substrate (i.e., sphere-on-flat geometry) to synergistically utilize the "coffee-ring" effect and repetitive stick-slip motions of the three-phase contact line simply by solvent evaporation. Highly ordered arrays of the ring-patterned MIP films are then polymerized under UV irradiation to achieve semi-interpenetrating polymer networks. The extraction of templated target molecules from the surface-imprinted ring-patterned MIP films leaves behind copious cavities for the recognizable specific "memory sites" to efficiently detect small molecules. As a result, the elaborated surface structuring effect, sensitivity, and specific selectivity of the coffee-ring-based MIP sensors are scrutinized by capitalizing on an endocrine-disrupting chemical, 2,4-dichlorophenoxyacetic acid (2,4-D), as an example. Clearly, the evaporative self-assembly of nonvolatile solutes in a confined geometry renders the creation of familiar yet ordered coffee-ring-like patterns for a wide range of applications, including sensors, scaffolds for cell motility, templates, substrates for neuron guidance, etc., thereby dispensing with the need of multistep lithography techniques and external fields.

Innovative utilization of molecular imprinting technology for selective adsorption and (photo)catalytic eradication of organic pollutants

The rapid development of industrialization and urbanization results in a numerous production of various organic chemicals to meet the increasing demand in high-quality life. During the synthesis and utilization of these chemical products, their residues unavoidably emerged in environments to severely threaten human's health. It is thus urgent to exploit effective technology for readily removing the organic pollutants with high selectivity and good reusability. As one of the most promising approaches, molecular imprinting technology (MIT) employs a chemically synthetic route to construct artificial recognition sites in highly-crosslinked matrix with complementary cavity and functional groups to target species, which have been attracting more and more interest for environmental remediation, such as the selective adsorption/separation and improved catalytic degradation of pollutants. In this review, MIT is first introduced briefly to understand their preparing process, recognition mechanism and common imprinted systems. Then, their specific binding affinities are demonstrated for selectively adsorbing and removing target molecules with a large capacity. Furthermore, the innovative utilization of MIT in catalytic eradication of pollutants is comprehensively overviewed to emphasize their enhanced efficiency and improved performances, which are classified by the used catalytically-active nanocrystals and imprinted systems. After summarizing recent advances in these fields, some limitations are discussed and possible suggestions are given to guide the future exploitation on MIT for environmental protection.

Extended gate-type organic transistor functionalized by molecularly imprinted polymer for taurine detection

Molecularly imprinted polymers (MIPs) are a fascinating technology for the sensitive and selective detection of target molecules. However, in most situations, the need for complicated and expensive analytical devices for reading the responses of MIPs greatly limits their applications. For exploring low-cost and easy-to-use applications of MIPs, herein we have developed a MIP-modified extended-gate type organic field-effect transistor (MIP-OFET). Taurine was selected as a demonstrative analyte due to its biological roles and utility as a nutrient. We explored the rational design of the novel MIP with the aid of density functional theory and wave function calculations and characterized the electrochemically synthesized MIP using differential pulse voltammetry and electrochemical impedance spectroscopy. The mechanism of taurine detection by the MIP-OFET can be explained by the changes in the surface potential of the MIP-functionalized extended-gate electrode accompanied with the capture of taurine. The detection limit of taurine in complete aqueous media was estimated to be 0.33 μM, which was lower or comparable to those calculated by high-performance liquid chromatography. Furthermore, taurine in a commercial drink without any extraction was also successfully detected using the fabricated MIP-OFET. This study would broaden the scope of the applications of MIP-OFETS as chemical sensors for on-site detection of various daily nutrients.

Synthesizing a surface-imprinted polymer based on the nanoreactor SBA-15 for optimizing the adsorption of salicylic acid from aqueous solution by response surface methodology

The molecularly imprinted polymer prepared on the nanoreactor SBA-15 displayed excellent ordered mesoporous structure and superior adsorption property for salicylic acid.

Insights into the structure-performance relationships of extraction materials in sample preparation for chromatography

Sample preparation is one of the most crucial steps in analytical processes. Commonly used methods, including solid-phase extraction, dispersive solid-phase extraction, dispersive magnetic solid-phase extraction, and solid-phase microextraction, greatly depend on the extraction materials. In recent decades, a vast number of materials have been studied and used in sample preparation for chromatography. Due to the unique structural properties, extraction materials significantly improve the performance of extraction devices. Endowing extraction materials with suitable structural properties can shorten the pretreatment process and improve the extraction efficiency and selectivity. To understand the structure-performance relationships of extraction materials, this review systematically summarizes the structural properties, including the pore size, pore shape, pore volume, accessibility of active sites, specific surface area, functional groups and physicochemical properties. The mechanisms by which the structural properties influence the extraction performance are also elucidated in detail. Finally, three principles for the design and synthesis of extraction materials are summarized. This review can provide systematic guidelines for synthesizing extraction materials and preparing extraction devices.

Application of micro/nanomaterials in adsorption and sensing of active ingredients in traditional Chinese medicine

Traditional Chinese medicine (TCM) has been widely applied for the prevention and cure of various diseases for centuries. Ingredient with pharmacological activity is the key to the application of TCM. Hence, it is of significance to separate and detect active ingredients in TCM effectively. Micro/nanomaterial is the promising candidate for adsorption and sensing due to its unique physical and chemical properties. For years, many efforts have been made to develop functional micro/nanomaterials to realize the effective adsorption or sensing of bioactive compounds in TCM. In this review, we discussed recent progresses in the application of various functional micro/nanomaterials for adsorption or detection (electrochemical detection, fluorescent detection, and colorimetric detection) of active ingredients. Based on the kind of matrix materials, micro/nano-adsorbents or sensors can be classified into following categories: metal-based micro/nanomaterials, porous materials, carbon-based materials, graphene/graphite-liked micro/nanomaterials and hybrid micro/nanomaterials.

Highly Characteristic Adsorption Based on Single Crystal {001}-TiO2 Surface Molecular Recognition Promotes Enhanced Oxidation

Exploring the adsorption and selective removal mechanism of target pollutants on the catalytic interface is an important research topic in the field of environmental sewage treatment. However, the molecular recognition based on the surface of single crystals is still unclear. Single crystal molecularly imprinted TiO₂ (001-MI-TiO₂) with a highly exposed {001} plane was prepared by a hydrothermal method to characteristically adsorb and degrade phenol. The kinetics of phenol oxidation on 001-MI-TiO₂ was 12.93 times that of polycrystal nonimprinted TiO₂. The phenol adsorption quantity of 001-MI-TiO₂ was 1.68 times that of the polycrystal molecularly imprinted TiO₂ (MI-TiO₂). Compared with MI-TiO₂, the significantly increased removal of phenol on 001-MI-TiO₂ mainly attributed to the enhanced adsorption quantity and better photocatalytic performance. The recognition mechanism of phenol on the 001-MI-TiO₂ during the adsorption process was studied using attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), which indicated enhanced adsorption of phenol when compared with MI-TiO₂. The recognition between the phenol molecule and the imprinted sites mainly relied on the hydrogen bond between the π bond of the benzene ring and the hydroxyl group on the surface of TiO₂. Besides, the interferent ATR-FTIR results showed that the single crystal surface can significantly reduce noncharacteristic adsorption, indicating good selectivity for the targets. In addition, the degradation intermediates during the photocatalytic process were further analyzed by in situ infrared technology.

Quantitative ciprofloxacin on-site rapid detections using quantum dot microsphere based immunochromatographic test strips

The ciprofloxacin (CIP) abuse has caused many problems threatening to human health. Here, we design the quantum dot microsphere (QDM) based immunochromatographic quantitative CIP test strip: when the sample under detection contains CIP, the QDM-monoclonal antibody (mAb) probes bound with the CIP and cannot be captured by CIP-bovine serum albumin (BSA) conjugation dispersed on the T lines, reducing the fluorescence intensities. These test strips can provide a low detection limit of 0.05 ng/mL and a wide linear detection range from 0.1 ng/mL to 100 ng/mL in high sensitivity and accuracy as well as good selectivity, reproducibility and stability. Moreover, a smartphone based test strip reader with the size of 85 mm × 48 mm × 44 mm is also fabricated using 3-D printing to automatically and quantitatively detect CIP. The whole process of CIP detection can be finished within 15 min, but only cost ~1 RMB (10 cents).

Silanized carbon dot-based thermo-sensitive molecularly imprinted fluorescent sensor for bovine hemoglobin detection

Using the surface molecular imprinting technique, a thermo-sensitive molecularly imprinted fluorescent sensor was constructed for bovine hemoglobin (BHb) detection with the silanized carbon dots (CD@SiO₂) as fluorescent signal, N-isopropylacrylamide as monomer sensitive to temperature, and BHb as template. The silanized carbon dots coated by the molecularly imprinted polymer (CD@SiO₂@MIP) were characterized by high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, and fluorescence spectroscopy. Owing to the combination of the strong fluorescence sensitivity of CDs and the high selectivity of the molecular imprinting shell, the prepared sensor showed good recognition and detection performance to the target protein BHb, with a linear range of 0.31-1.55 μM and a detection limit of 1.55 μM. Furthermore, the sensor was utilized to detect the content of BHb in real urine with a recovery of 98.6-100.5%. The CD@SiO₂@MIP sensors present a high potential for applications in the detection of BHb in biological systems. Graphical abstract.

Gold-Nanobipyramid-Based Nanotheranostics for Dual-Modality Imaging-Guided Phototherapy

Multimodality imaging-guided therapy can improve the diagnostics and therapeutics efficiency of cancer. Herein, we developed a light-responsive nanotheranostic agent based on the indocyanine green (ICG) conjugated mesoporous silica coated gold nanobipyramid (GNB@SiO₂) (denoted as GNB@SiO₂-ICG) for simultaneous fluorescence (FL)/photoacoustic (PA) imaging-guided photothermal therapy (PTT). The GNB@SiO₂ with excellent photostability was used for PA imaging as well as PTT. The loaded ICG promised FL imaging and PTT. The feasibility of the cancer theranostic capability of GNB@SiO₂-ICG was evaluated from cancer cells to mice. Under the guidance of FL/PA imaging, GNB@SiO₂-ICG exhibited remarkably enhanced therapeutic efficacy, which could eliminate the tumor tissues completely without tumor recurrence. This well-defined nanotheranostic nanoplatform that intelligently integrates dual-modality imaging and phototherapy provides an efficient nanoplatform for cancer nanotheranostics.

Biomimetic Sensitive Elements for 2,4,6-Trinitrotoluene Tested on Multi-Layered Sensors

In spite of technological progress, most of the current techniques for 2,4,6-trinitrotoluene (TNT) detection are time consuming due to laborious sensor preparation. Thereby, the aim of this work was to enlarge the knowledge for preparing sensitive elements for TNT with the aid of molecular imprinting; a known technique used to deliver biomimetic materials. The study first depicts the auto-assembly mechanism of (TNT) with functional diamino-silanes (i.e., N-(2-aminoethyl)-3-aminopropyl methyl dimethoxysilane), via “double” Meisenheimer complexes. This mechanism is being described herein for the first time and applied further to obtain molecularly imprinted polymer (MIP) films for TNT recognition. For testing the potential application of films as chemical sensor elements, typical rebinding assays of TNT in a liquid state and the rebinding of TNT in a vapor state, using multilayered sensor chips composed of quartz-chromium (Cr)-gold (Au)-titanium oxide (TiO2), were employed. Batch rebinding experiments have shown that thinner films were more efficient on retaining TNT molecules in the first five min, with a specificity of about 1.90. The quartz-Cr-Au-TiO2-MIP capacitive sensors, tested in vapor state, registered short response times (less than 25 s), low sensitivity to humidity and high specificity for TNT.

Molecularly Imprinted Nanoparticles for Biomedical Applications

Molecularly imprinted polymers (MIPs) are synthetic receptors with tailor-made recognition sites for target molecules. Their high affinity and selectivity, excellent stability, easy preparation, and low cost make them promising substitutes to biological receptors in many applications where molecular recognition is important. In particular, spherical MIP nanoparticles (or nanoMIPs) with diameters typically below 200 nm have drawn great attention because of their high surface-area-to-volume ratio, easy removal of templates, rapid binding kinetics, good dispersion and handling ability, undemanding functionalization and surface modification, and their high compatibility with various nanodevices and in vivo biomedical applications. Recent years have witnessed significant progress made in the preparation of advanced functional nanoMIPs, which has eventually led to the rapid expansion of the MIP applications from the traditional separation and catalysis fields to the burgeoning biomedical areas. Here, a comprehensive overview of key recent advances made in the preparation of nanoMIPs and their important biomedical applications (including immunoassays, drug delivery, bioimaging, and biomimetic nanomedicine) is presented. The pros and cons of each synthetic strategy for nanoMIPs and their biomedical applications are discussed and the present challenges and future perspectives of the biomedical applications of nanoMIPs are also highlighted.

Strategies for Molecular Imprinting and the Evolution of MIP Nanoparticles as Plastic Antibodies-Synthesis and Applications

Materials that can mimic the molecular recognition-based functions found in biology are a significant goal for science and technology. Molecular imprinting is a technology that addresses this challenge by providing polymeric materials with antibody-like recognition characteristics. Recently, significant progress has been achieved in solving many of the practical problems traditionally associated with molecularly imprinted polymers (MIPs), such as difficulties with imprinting of proteins, poor compatibility with aqueous environments, template leakage, and the presence of heterogeneous populations of binding sites in the polymers that contribute to high levels of non-specific binding. This success is closely related to the technology-driven shift in MIP research from traditional bulk polymer formats into the nanomaterial domain. The aim of this article is to throw light on recent developments in this field and to present a critical discussion of the current state of molecular imprinting and its potential in real world applications.

Preparation and applications of electrochemical chemosensors based on carbon-nanomaterial-modified molecularly imprinted polymers

The past few decades have witnessed a rapid development in electrochemical chemosensors (ECCSs). The integration of carbon nanomaterials (CNMs) and molecularly imprinted polymers (MIPs) has endowed ECCSs with high selectivity and sensitivity toward target detection. Due to the integrated merits of MIPs and CNMs, CNM-modified MIPs as ECCSs have been widely reported and have excellent detection applications. This review systematically summarized the general categories, preparation strategies, and applications of ECCSs based on CNM-modified MIPs. The categories include CNM-modified MIPs often hybridized with various materials and CNM-encapsulated or CNM-combined imprinting silica and polymers on working electrodes or other substrates. The preparation strategies include the polymerization of MIPs on CNM-modified substrates, co-polymerization of MIPs and CNMs on substrates, drop-casting of MIPs on CNM-modified substrates, self-assembly of CNMs/MIP complexes on substrates, and so forth. We discussed the in situ polymerization, electro-polymerization, and engineering structures of CNM-modified MIPs. With regard to potential applications, we elaborated the detection mechanisms, signal transducer modes, target types, and electrochemical sensing of targets in real samples. In addition, this review discussed the present status, challenges, and prospects of CNM-modified MIP-based ECCSs. This comprehensive review is desirable for scientists from broad research fields and can promote the further development of MIP-based functional materials, CNM-based hybrid materials, advanced composites, and hybrid materials.

Molecularly Imprinted Polymer Materials as Selective Recognition Sorbents for Explosives: A Review

Explosives are of significant interest to homeland security departments and forensic investigations. Fast, sensitive and selective detection of these chemicals is of great concern for security purposes as well as for triage and decontamination in contaminated areas. To this end, selective sorbents with fast binding kinetics and high binding capacity, either in combination with a sensor transducer or a sampling/sample-preparation method, are required. Molecularly imprinted polymers (MIPs) show promise as cost-effective and rugged artificial selective sorbents, which have a wide variety of applications. This manuscript reviews the innovative strategies developed in 57 manuscripts (published from 2006 to 2019) to use MIP materials for explosives. To the best of our knowledge, there are currently no commercially available MIP-modified sensors or sample preparation methods for explosives in the market. We believe that this review provides information to give insight into the future prospects and potential commercialization of such materials. We warn the readers of the hazards of working with explosives.