Dual-Reactive Surfactant Used for Synthesis of Functional Nanocapsules in Miniemulsion

Reconfiguration and Reorganization of Bottlebrush Polymer Surfactants

Bottlebrush random copolymers (BRCPs), having randomly distributed hydrophilic and hydrophobic side chains, are shown to reconfigure into hydrophilic-rich and hydrophobic-rich conformations at liquid-liquid interfaces to reduce interfacial energy. Both the degree of polymerization (N_BB ) and extent of grafting in these BRCPs were found to impact surface coverage and assembly kinetics. The time-dependence of the interfacial tension is described as the sum of two exponential relaxation functions characterizing BRCP diffusion, interfacial adsorption, and reorganization. Interfacial tension (γ) and fluorescence recovery after photobleaching (FRAP) results showed that higher molecular weight BRCPs require longer time to adsorb to the water-oil interface, but less time for interfacial reorganization. Overall, this work describes fundamental principles of BRCP assembly at liquid-liquid interfaces, with implications pertaining to polymer design with enhanced understanding of emulsification, adhesion, and related properties in fluids and at interfaces.

Dual-reactive nanogels for orthogonal functionalization of hydrophilic shell and amphiphilic network

Amphiphilic nanogels (NGs) combine a soft, water-swollen hydrogel matrix with internal hydrophobic domains. While these domains can encapsulate hydrophobic cargoes, the amphiphilic particle surface can reduce colloidal stability and/or limit biological half-life. Therefore, a functional hydrophilic shell is needed to shield the amphiphilic network and tune interactions with biological systems. To adjust core and shell properties independently, we developed a synthetic strategy that uses preformed dual-reactive nanogels. In a first step, emulsion copolymerization of pentafluorophenyl methacrylate (PFPMA) and a reduction-cleavable crosslinker produced precursor particles for subsequent network modification. Orthogonal shell reactivity was installed by using an amphiphilic block copolymer (BCP) surfactant during this particle preparation step. Here, the hydrophilic block poly(polyethylene glycol methyl ether methacrylate) (PPEGMA) contains a reactive alkyne end group for successive functionalization. The hydrophobic block (P(PFPMA-co-MAPMA) contains random methacryl-amido propyl methacrylamide (MAPMA) units to covalently attach the surfactant to the growing PPFPMA network. In the second step, orthogonal modification of the core and shell was demonstrated. Network functionalization with combinations of hydrophilic (acidic, neutral, or basic) and hydrophobic (cholesterol) groups gave a library of pH- and redox-sensitive amphiphilic NGs. Stimuli-responsive properties were demonstrated by pH-dependent swelling and reduction-induced degradation via dynamic light scattering. Subsequently, copper-catalyzed azide-alkyne cycloaddition was used to attach azide-modified rhodamine as model compound to the shell (followed by UV-Vis). Overall, this strategy provides a versatile platform to develop multi-functional amphiphilic nanogels as carriers for hydrophobic cargoes.

Biodegradable PCL-b-PLA Microspheres with Nanopores Prepared via RAFT Polymerization and UV Photodegradation of Poly(Methyl Vinyl Ketone) Blocks

Biodegradable triblock copolymers based on poly(ε-caprolactone) (PCL) and poly(lactic acid) (PLA) were synthesized via ring-opening polymerization of L-lactide followed by reversible addition–fragmentation chain-transfer (RAFT) polymerization of poly(methyl vinyl ketone) (PMVK) as a photodegradable block, and characterized by FT-IR and ¹H NMR spectroscopy for structural analyses, and by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) for their thermal properties. Porous, biodegradable PCL-b-PLA microspheres were fabricated via the oil/water (O/W) emulsion evaporation method, followed by photodegradation of PMVK blocks by UV irradiation. The macro-chain transfer agent (CTA) synthesized by reacting a carboxylic-acid-terminated CTA—S-1-dodecyl-S′-(a,a′-dimethyl-a′′-acetic acid)trithiocarbonate (DDMAT)—with a hydroxyl-terminated PCL-b-PLA block copolymer was used to synthesize well-defined triblock copolymers with methyl vinyl ketone via RAFT polymerization with controlled molecular weights and narrow polydispersity. Gel permeation chromatography traces indicated that the molecular weight of the triblock copolymer decreased with UV irradiation time because of the photodegradation of the PMVK blocks. The morphology of the microspheres before and after UV irradiation was investigated using SEM and videos of three-dimensional confocal laser microscopy, showing a change in their surface texture from smooth to rough, with high porosity owing to the photodegradation of the PMVK blocks to become porous templates.

Tumor microenvironment responsive nanogels as a smart triggered release platform for enhanced intracellular delivery of doxorubicin

The fabrication of novel and intelligent delivery systems that can effectively deliver therapeutics to the targeted site and release payload in enhanced/controlled manner is highly desired to overcome the multiple challenges in chemotherapy. The present article demonstrates the potential application of dual stimuli responsive nanogels as tumor microenvironment targeted drug delivery carrier. Disulfide cross-linked pH and redox responsive PEG-PDMAEMA nanogels were synthesized by atom transfer radical polymerization (ATRP). The nanogels were characterized by nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The PEG-PDMAEMA nanogels exhibited dual stimuli-responsive release of the encapsulated model anticancer drug (doxorubicin, DOX) due to the acidic pH-response of dimethyl amine group in PDMAEMA and reductive cleavage of the disulfide linkages. A relatively higher release of DOX was observed from the nanogels at pH 5.0 than at pH 7.4. DOX release was further accelerated in tumor simulated environment of pH 5.0 and 10 mM glutathione (GSH). Confocal microscopy images revealed that DOX-loaded PEG-PDMAEMA nanogels can rapidly internalize and effectively deliver the drug into the cells. The nanogels exhibited higher cytotoxicity in GSH-OEt pretreated HeLa cells than untreated cells. The dual stimuli responsive nanogels synthesized in this study exhibited many favorable traits, such as pH and redox dependent controlled release of drug, biodegradability, biocompatibility, and enhanced cytotoxicity, which endow them as a promising candidate for anticancer drug delivery.

Advanced Materials by Atom Transfer Radical Polymerization

Atom transfer radical polymerization (ATRP) has been successfully employed for the preparation of various advanced materials with controlled architecture. New catalysts with strongly enhanced activity permit more environmentally benign ATRP procedures using ppm levels of catalyst. Precise control over polymer composition, topology, and incorporation of site specific functionality enables synthesis of well-defined gradient, block, comb copolymers, polymers with (hyper)branched structures including stars, densely grafted molecular brushes or networks, as well as inorganic-organic hybrid materials and bioconjugates. Examples of specific applications of functional materials include thermoplastic elastomers, nanostructured carbons, surfactants, dispersants, functionalized surfaces, and biorelated materials.

Facile synthesis of hierarchical porous solid catalysts with acid–base bifunctional active sites for the conversion of cellulose to 5-hydroxymethylfurfural

Hierarchical porous catalysts with acid–base bifunctional active sites were successfully synthesized using a Pickering HIPE template that was stabilized by halloysite nanotubes.

Fabrication of polymer capsules by an original multifunctional, active, amphiphilic macromolecule, and its application in preparing PCM microcapsules

Based on our recent discovery that D-PGMA solution showed excellent amphiphilic and reinitiation properties, an eco-friendly, facile and scalable method to prepare polymeric capsules was proposed.

Fabrication of Redox-Responsive Degradable Capsule Particles by a Shell-Selective Photoinduced Cross-Linking Approach from Spherical Polymer Particles

In this study, a fabrication route towards functional capsule particles was successfully developed by means of a self-templating shell-selective cross-linking strategy that enables us to prepare shell-cross-linked hollow polymer particles directly from homogeneous spherical polymer particles. To prepare redox-responsive degradable capsule particles, a newly designed monomer bearing a photoinduced post-cross-linking group (cinnamoyl group) and a redox-environment-responsive cleavable group (disulfide group), N-cinnamoyl-N'-methyacryloylcystamine (MCC), was synthesized. Redox-responsive degradable capsule particles were successfully prepared from homogeneous spherical poly(MCC)-based particles by a self-templating shell-selective photoinduced cross-linking approach. Moreover, the cargo loading capability of the shell-cross-linked hollow particles was confirmed through a solvent exchange procedure using dyes, polymer precursors and anticancer reagents. Furthermore, redox-responsive degradability of the capsule polymer particles was also confirmed by adding a reducing agent for cleavage of the disulfide linkage. We hope that the efficient fabrication route of functional capsule particles directly from spherical polymer particles opens efficient routes for the fabrication of a wide range of capsule particles; in particular, this technique is robust, productive, and facile because neither additional sacrificial template particles nor toxic solvents are required.

Coordination polymer nanocapsules prepared using metal-organic framework templates for pH-responsive drug delivery

A facile, efficient, and versatile approach is presented to synthesize pH-responsive nanocapsules (∼120 nm) by combining the advantages of metal-organic frameworks (MOFs) and metal-organic thin films. ZIF-8 nanoparticles are used as templates on which a thin film coating of iron(III)-catechol complexes is derived from the coordination between dopamine-modified alginate (AlgDA) and iron(III) ions. After the template removal, nanocapsules with a pH-responsive wall are obtained. Doxorubicin (Dox), a typical anticancer drug, is first immobilized in ZIF-8 frameworks through coprecipitation and then encapsulated in nanocapsules after the removal of ZIF-8. The structure of the iron(III)-catechol complex varies with pH value, thus conferring the Dox@Nanocapsules with tailored release behavior in vitro. Cytotoxicity tests illustrate the highly effective cytotoxicity of Dox@Nanocapsules towards cancer cells. This study provides a new method for preparing smart nanocapsules and offers more opportunities for the controlled delivery of drugs.

Encapsulation of Either Hydrophilic or Hydrophobic Substances in Spongy Cellulose Particles

We have reported cellulose particles with a spongy structure that we prepared by the solvent releasing method (SRM) from cellulose droplets composed of cellulose, 1-butyl-3-methylimidazoliumchrolide ([Bmim]Cl), and N,N-dimethylformamide (DMF). The spongy structure collapsed as the medium evaporated, resulting in dense cellulose particles. In this study, we encapsulated the hydrophilic and hydrophobic fluorescent substances in these particles to investigate the use of such particles in potential applications that require encapsulating of substances (e.g., drug delivery). Wet cellulose particles retained their spongy structure in both hydrophobic and hydrophilic media. When the spongy cellulose particles were dispersed in a solution containing nonvolatile solutes, these solutes were driven into the cellulose particles as media evaporated. Subsequently, the cellulose particles collapsed and encapsulated the nonvolatile solutes. Regardless of whether the solute was hydrophilic or hydrophobic, the encapsulation efficiency exceeds 80%. The maximum loading reflected the saturated solubility of solute in solution that filled the cellulose beads. Moreover, the encapsulated solute was released by dispersing the cellulose beads in the solvent, and the rate of release of the encapsulated solute could be controlled by coating the cellulose beads with a conventional polymer.

Rheology and structure of surface crosslinked surfactant-activated microgels

Nonionic surfactant-activated microgels (SAMs), composed of hydrophobic alkyl acrylates and hydrophilic hydroxyalkyl esters that utilize the effects of surfactant mediated swelling and interaction to provide pH-independent rheological properties, were previously reported as a new pathway to the rheology modification of surfactant solutions. Crosslinking was shown to play an important role in the properties of these soft microgel systems. To understand the impact of crosslinking chemistry on SAM polymers, we have compared two types of SAM polymers: a conventionally crosslinked SAM polymer via allyl pentaerythritol and a novel SAM polymer, where the surface is self-crosslinked via a reactive surfactant. We have systematically characterized the polymer's swelling, rheology and microstructure in a model system containing the polymer, sodium dodecyl sulfate (SDS) and water. Surface self-crosslinking is demonstrated to be a more effective crosslinking approach to create surfactant-mediated interactions between the microgel particles, resulting in more effective rheology modification. Internal crosslinking hinders both the full swelling of the SAM polymer as well as inter-particle bridging interactions, and is therefore less effective. To our best knowledge, this is the first report on creating a novel surface self-crosslinked microgel via a dual-functional reactive surfactant that interacts with a non-reactive surfactant to create a yield stress fluid.

Stabilization of Inverse Miniemulsions by Silyl-Protected Homopolymers

Inverse (water-in-oil) miniemulsions are an important method to encapsulate hydrophilic payloads such as oligonucleotides or peptides. However, the stabilization of inverse miniemulsions usually requires block copolymers that are difficult to synthesize and/or cannot be easily removed after transfer from a hydrophobic continuous phase to an aqueous continuous phase. We describe here a new strategy for the synthesis of a surfactant for inverse miniemulsions by radical addition⁻fragmentation chain transfer (RAFT) polymerization, which consists in a homopolymer with triisopropylsilyl protecting groups. The protecting groups ensure the efficient stabilization of the inverse (water-in-oil, w/o) miniemulsions. Nanocapsules can be formed and the protecting group can be subsequently cleaved for the re-dispersion of nanocapsules in an aqueous medium with a minimal amount of additional surfactant.

Control of Uniform and Interconnected Macroporous Structure in PolyHIPE for Enhanced CO2 Adsorption/Desorption Kinetics

The highly uniform and interconnected macroporous polymer materials were prepared within the high internal phase hydrosol-in-oil emulsions (HIPEs). Impregnated with polyethylenimine (PEI), the polyHIPEs were then employed as solid adsorbents for CO2 capture. Thermodynamic and kinetic capture-and-release tests were performed with pure CO2, 10% CO2/N2, and moist CO2, respectively. It has shown that the polyHIPE with suitable surface area and PEI impregnation exhibits high CO2 adsorption capacity, remarkable CO2/N2 selectivity, excellent adsorption/desorption kinetics, enhanced efficiency in the presence of water, and admirable stability in capture and release cycles. The results demonstrate the superior comprehensive performance of the present PEI-impregnated polyHIPE for CO2 capture from the postcombustion flue gas.

Acetylene-sourced CVD-synthesised catalytically active graphene for electrochemical biosensing

In this study, we have demonstrated the use of chemical vapour deposition (CVD) grown-graphene to develop a highly-ordered graphene-enzyme electrode for electrochemical biosensing. The graphene sheets were deposited on 1.00mm thick copper sheet at 850°C using acetylene (C₂H₂) as carbon source in an argon (Ar) and nitrogen (N₂) atmosphere. An anionic surfactant was used to increase wettability and hydrophilicity of graphene; thereby facilitating the assembly of biomolecules on the electrode surface. Meanwhile, the theoretical calculations confirmed the successful modification of hydrophobic nature of graphene through the anionic surface assembly, which allowed high-ordered immobilisation of glucose oxidase (GOx) on the graphene. The electrochemical sensing activities of the graphene-electrode was explored as a model for bioelectrocatalysis. The bioelectrode exhibited a linear response to glucose concentration ranging from 0.2 to 9.8mM, with sensitivity of 0.087µA/µM/cm² and a detection limit of 0.12µM (S/N=3). This work sets the stage for the use of acetylene-sourced CVD-grown graphene as a fundamental building block in the fabrication of electrochemical biosensors and other bioelectronic devices.

Azide-based heterobifunctional poly(ethylene oxide)s: NaN3-initiated “living” polymerization of ethylene oxide and chain end functionalizations

Sodium azide (NaN₃)-initiated “living” ring-opening polymerization of ethylene oxide and chain end functionalizations.

Synthesis of microcapsules using inverse emulsion periphery RAFT polymerization via SPG membrane emulsification

Synthesis of polymeric capsules with good control over the particle size and size distribution is demonstratedviaa novel approach involving SPG membrane emulsification.

Synthesis of well-defined core–shell nanoparticles based on bifunctional poly(2-oxazoline) macromonomer surfactants and a microemulsion polymerization process

Surface-functional nanoparticles have been fabricated by utilizing bifunctional poly(2-oxazoline) macromonomers as surfactants in a microemulsion process.

Radical polymerization of miniemulsions induced by compressed gases

Pressurization of a macroemulsion comprising a vinyl monomer/water/surfactant can result in formation of a transparent miniemulsion without use of high energy mixing, suitable for synthesis of polymeric nanoparticlesviaminiemulsion polymerization.

Amphiphilic Polymerizable Porphyrins Conjugated to a Polyglycerol Dendron Moiety as Functional Surfactants for Multifunctional Polymer Particles

An amphiphilic polyglycerol dendron (PGD) conjugated porphyrin (PGP) bearing a polymerizable group was successfully synthesized. The PGP was used as an effective surfactant in emulsion and microsuspension polymerization systems to prepare styrene and methacrylate polymer particles, and the use of PGP provided the simple polymer particles with fluorescence derived from the metalloporphyrin and high colloidal stability due to the PGD. Furthermore, based on confocal laser scanning microscopy, we observed that the particles spontaneously formed a core-shell morphology with the PGP localized in the shell region during the polymerization and demonstrated drug loading in the shell region using rhodamine B as a model drug. The results indicate that the use of the functional surfactant PGP led to the preparation of multifunctional polymer particles from simple monomer species, and the resulting particles possessed high colloidal stability, fluorescence, and drug loading capability.

Synthesis of multi-functional nanocapsules via interfacial AGET ATRP in miniemulsion for tumor micro-environment responsive drug delivery

Novel multi-functional polymeric hollow nanocapsules (PHN) based on the crosslinked poly(tert-butyl acrylate) (PtBA) shells were synthesized in a miniemulsion interfacial polymerization via activator generated electron transfer atom transfer radical polymerization (AGET ATRP) technique with N,N'-bis(acryloyl) cystamine (BACy) as cross-linking agent, CuBr₂ as catalyst, ascorbic acid (VC) as reducing agent and hexadecane as inert solvent. In the AGET ATRP, a folate-conjugated block copolymer, folate-poly(ethylene glycol)-b-poly(tert-butyl acrylate) (FA-PEG-tBA-Br), was used as macroinitiator/stabilizer, and the specific amphiphilic nature of the copolymer led the extending inward of polymer chains. The DLS analysis directly showed the PHN with an average diameter of 150 nm was obtained. After the PtBA shells were transformed into poly(acrylic acid) (PAA) by hydrolysis, doxorubicin (DOX), as a model drug, was loaded efficiently into the hydrolyzed polymeric hollow nanocapsules (HPHN), then the in vitro release of drug was carried out in phosphate buffer solution (PBS, pH 7.4 or 5.0, with or without DTT or GSH of different concentrations). It showed that the existence of folate group significantly improved pH stimuli-responsive and DOX-loading capacity of the polymeric nanocapsules. An acidic pH (5.0) and presence of GSH would accelerate the DOX release behavior. Thus, these multi-functional polymeric nanocapsules have excellent available properties in the field of targeted and controlled drug delivery for cancer therapy.

Biocompatible Glycopolymer Nanocapsules via Inverse Miniemulsion Periphery RAFT Polymerization for the Delivery of Gemcitabine

Encapsulation of hydrophilic cancer drugs in polymeric nanocapsules was achieved in a one-pot process via the inverse miniemulsion periphery RAFT polymerization (IMEPP) approach. The chosen guest molecule was gemcitabine hydrochloride, which is used as the first-line treatment of pancreatic cancer. The resulting nanocapsules were confirmed to be ∼200 nm, with excellent encapsulation (∼96%) and loading (∼12%) efficiency. Postpolymerization reaction was successfully conducted to create glyocopolymer nanocapsules without any impact on the loads as well as the nanocapsules size or morphology. The loaded nanocapsules were specifically designed to be responsive in a reductive environment. This was confirmed by the successful disintegration of the nanocapsules in the presence of glutathione. The gemcitabine-loaded nanocapsules were tested in vitro against pancreatic cancer cells (AsPC-1), with the results showing an enhancement in the cytotoxicity by two fold due to selective accumulation and release of the nanocapsules within the cells. The results demonstrated the versatility of IMEPP as a tool to synthesize functionalized, loaded-polymeric nanocapsules suitable for drug-delivery application.

Intracellular delivery cellulose-based bionanogels with dual temperature/pH-response for cancer therapy

Polysaccharide-based crosslinked nanogles (bionanogels) exhibiting multiple stimuli-responsive release of encapsulated therapeutics hold a great potential as tumor-targeting intracelluar durg delivery nanocarriers. Herein, we report the synthesis of monodisperse dual temperature/acidic pH-responsive bionanogels (DuR-BNGs) by aqueous crosslinking polymerization through temperature-induced self-association method. The DuR-BNGs have prolonged colloidal stability and negligible non-specific interactions with proteins. In response to acidic pH at higher temperature (above lower critical solution temperature), they exhibit synergistic release of anticancer drugs as a consequence of both acidic pH-sensitivity of carboxymethyl cellulose and temperature-induced volume change of grafted thermoresponsive copolymers. In vitro cell culture results suggest that new colloidally-stable DuR-BNG is a promising candidate promoting dual stimuli-responsive drug release for cancer therapy.

High porosity supermacroporous polystyrene materials with excellent oil-water separation and gas permeability properties

Two types of monolith high-porosity supermacroporous polystyrene materials had been controlled synthesized from water-in-oil Pickering emulsions. The first type, closed-cell high-porosity (up to 91%) supermacroporous (ca. 500 μm) polystyrene materials (CPPs) was prepared by employing amphiphilic carbonaceous microspheres (CMs) as high internal phase emulsion stabilizer without any inorganic salts or further modifying the wettability of the particles. The second type, hierarchical porous polystyrene materials with highly interconnected macropores (IPPs), was constructed from emulsions stabilized simultaneously by CM particles and a little amount of surfactants. Both types of these monolith porous polystyrene materials possessed excellent mechanical strength. The CPPs were used as absorbents for oil-water separation and high absorption capacity, and absorption rate for oils were realized, which was attributed to their porosity structure and the swelling property of the polystyrene, while the IPPs were highly permeable for gases due to their interconnected macropores.

Light cross-linkable and pH de-cross-linkable drug nanocarriers for intracellular drug delivery

Novel light cross-linkable and pH de-cross-linkable micelles were developed as drug nanocarriers, based on the combination of light responsive coumarin moieties and pH responsive hydrazone groups in one cross-linking section.

Synthesis of pH-Responsive Nanocapsules via Inverse Miniemulsion Periphery RAFT Polymerization and Post-Polymerization Reaction

We report herein the versatility of inverse miniemulsion periphery RAFT polymerization (IMEPP) and postpolymerization reaction in producing pH-responsive nanocapsules with different functionalities. The robustness of the polymeric nanocapsules was confirmed by their ability to undergo reactions, be dried, and be redispersed in various solvents without any changes in size and core-shell morphology. Nanocapsules bearing carboxylic acid (COOH) functionalities were produced via hydrolysis, while nanocapsules bearing tertiary-amine (N-X₃) functionalities were synthesized via aminolysis. The responsive behavior of the nanocapsules was tested in aqueous solution with pHs ranging from 3 to 12. Nanocapsules with COOH functionalities were found to swell under basic conditions due to the deprotonated carboxylate ions. In contrast, nanocapsule with tertiary amine functionalities underwent swelling in acidic conditions.

Emerging methods for the fabrication of polymer capsules

Hollow polymer capsules are attracting increasing research interest due to their potential application as drug delivery vectors, sensors, biomimetic nano- or multi-compartment reactors and catalysts. Thus, significant effort has been directed toward tuning their size, composition, morphology, and functionality to further their application. In this review, we provide an overview of emerging techniques for the fabrication of polymer capsules, encompassing: self-assembly, layer-by-layer assembly, single-step polymer adsorption, bio-inspired assembly, surface polymerization, and ultrasound assembly. These techniques can be applied to prepare polymer capsules with diverse functionality and physicochemical properties, which may fulfill specific requirements in various areas. In addition, we critically evaluate the challenges associated with the application of polymer capsules in drug delivery systems.

Macromolecular engineering by atom transfer radical polymerization

This Perspective presents recent advances in macromolecular engineering enabled by ATRP. They include the fundamental mechanistic and synthetic features of ATRP with emphasis on various catalytic/initiation systems that use parts-per-million concentrations of Cu catalysts and can be run in environmentally friendly media, e.g., water. The roles of the major components of ATRP--monomers, initiators, catalysts, and various additives--are explained, and their reactivity and structure are correlated. The effects of media and external stimuli on polymerization rates and control are presented. Some examples of precisely controlled elements of macromolecular architecture, such as chain uniformity, composition, topology, and functionality, are discussed. Syntheses of polymers with complex architecture, various hybrids, and bioconjugates are illustrated. Examples of current and forthcoming applications of ATRP are covered. Future challenges and perspectives for macromolecular engineering by ATRP are discussed.