Free-Energy Surfaces for Liquid-Phase Reactions and Their Use To Study the Border Between Concerted and Nonconcerted α,β-Elimination Reactions of Esters and Thioesters

Copper-Catalyzed Aryne Insertion into the Carbon-Iodine Bond of Heteroaryl Iodides

Aryne insertions into the carbon-iodine bond of heteroaryl iodides has been achieved for the first time. This novel reaction provides an efficient pathway for the synthesis of valuable building blocks 2-iodoheterobiaryls from heteroaryl iodides and o-silylaryl triflates in excellent regioselectivity. The copper(I) catalyst, which bears a N-heterocyclic carbene (NHC) ligand, is essential to accomplish the reaction. Control reactions and DFT calculations indicate that the coordination of copper, as a Lewis acid, with nitrogen atoms of heteroaryl iodides mediates the insertion of arynes into heteroaryl carbon-iodine bonds.

A theoretical study on the hydrogenation of CO2 to methanol catalyzed by ruthenium pincer complexes

Herein, a density functional theory (DFT) study was performed to investigate thoroughly the cascade reaction mechanism for the hydrogenation of carbon dioxide to methanol catalyzed by ruthenium pincer complex [RuH₂(Me₂PCH₂SiMe₂)₂NH(CO)]. Three catalytic stages involving the hydrogenation of carbon dioxide (stage I), formic acid (stage II) and formaldehyde (stage III) were studied. The calculated results show that the dominant H₂ activation strategy in the hydrogenation of CO₂ to methanol may not be the methanol-assisted H₂ activation, but the formate-assisted H₂ activation. In this cascade reaction, all energy spans of stage I, II and III are 20.2 kcal mol^-1 of the formate-assisted H₂ activation. This implies that it could occur under mild conditions. Meanwhile, the catalyst is proposed to be efficient for the transfer hydrogenation using isopropanol as the hydrogen resource, and the ruthenium pincer complexes [RuH₂(Me₂PCH₂SiMe₂)₂NH(CO)], [RuH₂(Ph₂PCH₂SiMe₂)₂NH(CO)] and [RuH₂(Me₂PCH₂SiMe₂)₂NH(CO)] exhibit similar catalytic activities for the hydrogenation of CO₂ to methanol.

Composition- and Condition-Dependent Kinetics of Homogeneous Ester Hydrogenation by a Mn-Based Catalyst

The reaction medium and conditions are the key parameters defining the efficiency and performance of a homogeneous catalyst. In the state-of-the-art molecular descriptions of catalytic systems by density functional theory (DFT) calculations, the reaction medium is commonly reduced to an infinitely diluted ideal solution model. In this work, we carry out a detailed operando computational modeling analysis of the condition dependencies and nonideal solution effects on the mechanism and kinetics of a model ester hydrogenation reaction by a homogeneous Mn(I)-P,N catalyst. By combining DFT calculations, COSMO-RS solvent model, and the microkinetic modeling approach, the kinetic behavior of the multicomponent homogeneous catalyst system under realistic reaction conditions was investigated in detail. The effects of the reaction medium and its dynamic evolution in the course of the reaction were analyzed by comparing the results obtained for the model methyl acetate hydrogenation reaction in a THF solution and under solvent-free neat reaction conditions. The dynamic representations of the reaction medium give rise to strongly nonlinear effects in the kinetic models. The nonideal representation of the reaction medium results in pronounced condition dependencies of the computed energetics of the elementary reaction steps and the computed kinetic profiles but affects only slightly such experimentally accessible kinetic descriptors as the apparent activation energy and the degree of rate control.

Catalytic Effect of Electric Fields on the Kemp Elimination Reactions with Neutral Bases

The effect of solvent reaction fields and oriented electric fields on the Kemp elimination reaction between methylamine or imidazole and 5-nitrobenzisoxazole has been theoretically studied. The Kemp reaction is the most widely used for the design of new enzymes. Our results, using the SMD continuous model for solvents, are in quite good agreement with the experimental fact that the rate of the analogous reaction with butylamine is one order of magnitude smaller in water than in acetonitrile. In the case of external electric fields, our results show that they can increase or decrease the energy barrier depending on the magnitude and orientation of the field. A duly oriented electric field may have a notable catalytic effect on the reaction. So, external electric fields and reaction fields due to the medium can contribute to the design of new enzymes. Several factors that must be taken into account to increase the catalytic effect are discussed.

Operando Modeling of Multicomponent Reactive Solutions in Homogeneous Catalysis: from Non-standard Free Energies to Reaction Network Control

Optimization and execution of chemical reactions are to a large extend based on experience and chemical intuition of a chemist. The chemical intuition is rooted in the phenomenological Le Chatelier's principle that teaches us how to shift equilibrium by manipulating the reaction conditions. To access the underlying thermodynamic parameters and their condition-dependencies from the first principles is a challenge. Here, we present a theoretical approach to model non-standard free energies for a complex catalytic CO2 hydrogenation system under operando conditions and identify the condition spaces where catalyst deactivation can potentially be suppressed. Investigation of the non-standard reaction free energy dependencies allows rationalizing the experimentally observed activity patterns and provides a practical approach to optimization of the reaction paths in complex multicomponent reactive catalytic systems.

Systematic microsolvation approach with a cluster-continuum scheme and conformational sampling

Solvation is a notoriously difficult and nagging problem for the rigorous theoretical description of chemistry in the liquid phase. Successes and failures of various approaches ranging from implicit solvation modeling through dielectric continuum embedding and microsolvated quantum chemical modeling to explicit molecular dynamics highlight this situation. Here, we focus on quantum chemical microsolvation and discuss an explicit conformational sampling ansatz to make this approach systematic. For this purpose, we introduce an algorithm for rolling and automated microsolvation of solutes. Our protocol takes conformational sampling and rearrangements in the solvent shell into account. Its reliability is assessed by monitoring the evolution of the spread and average of the observables of interest.

Kemp Elimination Reaction Catalyzed by Electric Fields

The Kemp elimination reaction is the most widely used in the de novo design of new enzymes. The effect of two different kinds of electric fields in the reactions of acetate as a base with benzisoxazole and 5-nitrobenzisoxazole as substrates have been theoretically studied. The effect of the solvent reaction field has been calculated using the SMD continuum model for several solvents; we have shown that solvents inhibit both reactions, the decrease of the reaction rate being larger as far as the dielectric constant is increased. The diminution of the reaction rate is especially remarkable between aprotic organic solvents and protic solvents as water, the electrostatic term of the hydrogen bonds being the main factor for the large inhibitory effect of water. The presence of an external electric field oriented in the direction of the charge transfer (z axis) increases it and, so, the reaction rate. In the reaction of the nitro compound, if the electric field is oriented in an orthogonal direction (x axis) the charge transfer to the NO₂ group is favored and there is a subsequent increase of the reaction rate. However, this increase is smaller than the one produced by the field in the z axis. It is worthwhile mentioning that one of the main effects of external electric fields of intermediate intensity is the reorientation of the reactants. Finally, the implications of our results in the de novo design of enzymes are discussed.

Computational Approach to Molecular Catalysis by 3d Transition Metals: Challenges and Opportunities

Computational chemistry provides a versatile toolbox for studying mechanistic details of catalytic reactions and holds promise to deliver practical strategies to enable the rational in silico catalyst design. The versatile reactivity and nontrivial electronic structure effects, common for systems based on 3d transition metals, introduce additional complexity that may represent a particular challenge to the standard computational strategies. In this review, we discuss the challenges and capabilities of modern electronic structure methods for studying the reaction mechanisms promoted by 3d transition metal molecular catalysts. Particular focus will be placed on the ways of addressing the multiconfigurational problem in electronic structure calculations and the role of expert bias in the practical utilization of the available methods. The development of density functionals designed to address transition metals is also discussed. Special emphasis is placed on the methods that account for solvation effects and the multicomponent nature of practical catalytic systems. This is followed by an overview of recent computational studies addressing the mechanistic complexity of catalytic processes by molecular catalysts based on 3d metals. Cases that involve noninnocent ligands, multicomponent reaction systems, metal-ligand and metal-metal cooperativity, as well as modeling complex catalytic systems such as metal-organic frameworks are presented. Conventionally, computational studies on catalytic mechanisms are heavily dependent on the chemical intuition and expert input of the researcher. Recent developments in advanced automated methods for reaction path analysis hold promise for eliminating such human-bias from computational catalysis studies. A brief overview of these approaches is presented in the final section of the review. The paper is closed with general concluding remarks.

Phosphoryl-Transfer Reaction in RNA under Alkaline Conditions

The phosphoryl-transfer reaction in RNA under alkaline conditions by exploring the influence of several solvents theoretically was studied. The calculations were carried out by using the M06-2X functional and the solvents were taken as a continuum by using the solvent model density (SMD) method. The main findings show that the O2'-P-O5' angle in the reactants, the free activation energies, and the reaction mechanism are clearly dependent on the dielectric constant of the environment, thus showing that the electrostatic term is the determining factor for this chemical system with two negative charges. Our study seems to indicate that water, the solvent with the greatest dielectric constant, would be the solvent that increases the reaction rate the most. As this outcome was not the case in enzymatic catalysis, one has to conclude that, in the case of proteins as well as for ribozymes, the enzymatic catalysis is not mainly due to the solvent reaction field, but to local electrical fields as a result of enzyme preorganization.

Solvent Effect on the Potential Energy Surfaces of the F- + CH3CH2Br Reaction

Although substantial work has been undertaken on reaction pathways involved in base-promoted elimination reactions and bimolecular nucleophilic substitution reaction of F^- on CH₃CH₂X (X = Cl, Br, I), the effect of solvents with varying dielectric constants on the stereochemistry of each of the reaction species involved across the reaction profile have not yet been clearly understood. The present investigation reports the effect of solvents on the potential energy surfaces (PES) and structures of the species appearing in the reaction pathway of F^- with bromoethane. The PESs in the gas phase have been computed at MP2 level and CCSD(T) level. The performance of several hybrid density functional, such as B3LYP, M06, M06L, BHandH, X3LYP, M05, M05-2X, and M06-2X have also been investigated toward describing the elimination and nucleophilic substitution reactions. With respect to MAE values and to make the computation cost-effective, we have explored the implicit continuum solvent model, CPCM in solvents like cyclohexane, methanol, acetonitrile, dimethyl sulfoxide and water. The reactant complexes proceed through the subsequent steps to produce fluoroethane as the substitution product and ethylene as one of the elimination products. For elimination reaction both syn and anti elimination have been explored. The calculated relatives energies values, which are negative in the gas phase, are found to be positive in polar solvents since the point charge in the separated reactants are more stabilized than the dispersed charge in the transient complex, which has also been analyzed through NBO analysis.

Experimentally realized mechanochemistry distinct from force-accelerated scission of loaded bonds

Stretching polymer chains accelerates dissociation of a variety of internal covalent bonds, to an extent that correlates well with the force experienced by the scissile bond. Recent theory has also predicted scenarios in which applied force accelerates dissociation of unloaded bonds and kinetically strengthens strained bonds. We report here unambiguous experimental validation of this hypothesis: Detailed kinetic measurements demonstrate that stretching phosphotriesters accelerates dissociation of the unloaded phosphorus-oxygen bond orthogonal to the pulling axis, whereas stretching organosiloxanes inhibits dissociation of the aligned loaded silicon-oxygen bonds. Qualitatively, the outcome is determined by phosphoester elongation and siloxane contraction along the pulling axis in the respective rate-determining transition states. Quantitatively, the results agree with a simple mechanochemical kinetics model.

Contrasting C- and O-Atom Reactivities of Neutral Ketone and Enolate Forms of 3-Sulfonyloxyimino-2-methyl-1-phenyl-1-butanones

The mechanisms of intramolecular cyclization of 3-sulfonyloxyimino-2-methyl-1-phenyl-1-butanones (1) under basic (DABCO and t-BuOK) and acidic (AcOH and TFA) conditions were investigated by means of experimental and computational methods. The ketone, enol, and enolate forms of 1 can afford different intramolecular cyclization products (2, 3, 4), depending on the conditions. The results of the reaction of 1 under basic conditions suggest intermediacy of neutral enol (DABCO) and anionic enolate (t-BuOK), while the results under acidic conditions (AcOH and TFA) indicate involvement of neutral ketones, which exhibit reactivities arising from both the oxygen lone-pair electrons (O atom reactivity) and carbon σ-electrons (C atom reactivity). The neutral enol in DABCO afforded 2H-azirine 4. On the other hand, the products (isoxazole 2 and oxazole 3) generated from the ketone form and from the enolate form are the same, but the reaction mechanisms are apparently different. The results demonstrate ambident-like reactivity of neutral ketone in the 3-sulfonyloxyimino-2-methyl-1-phenyl-1-butanone system.

Phosphoryl Transfer Reaction in RNA: Is the Substrate-Assisted Catalysis a Possible Mechanism in Certain Solvents?

A proton shuttle mechanism for the phosphoryl transfer reaction in RNA, in which a proton is transferred from the nucleophile to the leaving group through a nonbridged oxygen atom of the phosphate, was explored using the MO6-2X density functional method and the solvent continuum model. This reaction is the initial step of the RNA hydrolysis. We used different solvents characterized by their dielectric constant, and, for each of them, we studied the nuclear and electronic relaxation, produced by the solvent reaction field, for the stationary points. Given that RNA has a poor leaving group, the bond breaking corresponds to the rate-determining step. If the O atom is substituted by a S atom, the leaving group is now good, and the rate-determining step is now the nucleophilic attack concerted with the proton transfer. The most relevant result we found is that none of the solvents we studied has a free energy of activation that is smaller than the one in water. This suggests that the enzyme catalysis following this mechanism must be due to the permanent electric field that is created by a preorganized charge distribution but not to the solvent reaction field.

Variational transition state theory: theoretical framework and recent developments

This article reviews the fundamentals of variational transition state theory (VTST), its recent theoretical development, and some modern applications.

Theoretical Insights on the Mechanism of the GTP Hydrolysis Catalyzed by the Elongation Factor Tu (EF-Tu)

The purpose of this work is to have a better understanding of the mechanism of GTP hydrolysis catalyzed by the elongation factor Tu. Two main aspects are being discussed in the literature: the associative or dissociative character of the process and the nature of nucleophile activation. The calculations of the QM subsystem have been done by means of the M06-2X density functional and the split valence triple-ζ 6-311+G(d,p) basis set. The environmental effect has been introduced through the continuum SMD method. We have studied three models of increasing complexity in order to analyze the different factors that intervene in the catalytic action. The results obtained in this paper confirm that the protonated His84 plays a fundamental role in the catalytic mechanism, but we have also found that the crystallographic sodium ion has a notable effect in the catalysis. So, our work has permitted a new insight, complementary to those obtained with QM/MM calculations, into this very complex process.

Theoretical and Experimental Investigation of Thermodynamics and Kinetics of Thiol-Michael Addition Reactions: A Case Study of Reversible Fluorescent Probes for Glutathione Imaging in Single Cells

Density functional theory (DFT) was applied to study the thermodynamics and kinetics of reversible thiol-Michael addition reactions. M06-2X/6-31G(d) with the SMD solvation model can reliably predict the Gibbs free energy changes (ΔG) of thiol-Michael addition reactions with an error of less than 1 kcal·mol(-1) compared with the experimental benchmarks. Taking advantage of this computational model, the first reversible reaction-based fluorescent probe was developed that can monitor the changes in glutathione levels in single living cells.

Transition state theory for enzyme kinetics

This article is an essay that discusses the concepts underlying the application of modern transition state theory to reactions in enzymes. Issues covered include the potential of mean force, the quantization of vibrations, the free energy of activation, and transmission coefficients to account for nonequilibrium effect, recrossing, and tunneling.

DFT studies of the formation of furanoid derivatives of ammonium chlorides

B3LYP/6-31+G** level computations were performed on the formation of ammonium salts during the reaction of (S)-1,4-anhydro-5-chloro-2,3,5-trideoxypentitol (1) (2S,5S)-2,5-anhydro-6-chloro-1,3,4,6-tetradeoxyhexitol (2) and methyl 5-chloro-2,3,5-trideoxy-β-D-pentofuranoside (3) with ammonia in order to describe the reaction pathway in detail. All the structures were fully optimized in the gas phase, in chloroform and water. In addition, the gas phase activation barrier heights were estimated at B3LYP/6-311++G**, MPWIK/6-31+G**, MPWIK/6-311++G** and MP2/6-311++G(2d,2p)//MPWIK/6-31+G** levels of theory. All the calculations in solvents were performed the using polarizable continuum model (PCM) and the B3LYP functional with the 6-31+G** basis set. A detailed description of all the stationary points is presented, and the conformational behavior of the five-membered ring is discussed in the gas phase and in the solvents. The conversion of the reactant complexes into ion pairs is accompanied by a strong energy decrease in the gas phase and in all the solvents. The overall process is strongly unfavorable in the gas phase, but takes place readily in high-polarity solvents.

Computational studies of the gas phase reactions of ethers with anions: kinetic barriers, isotope effects, consecutive eliminations and site selectivity

Bimolecular elimination reactions (E2) are fundamentally important processes in organic chemistry. Our current work focuses on a computational investigation of several interesting and unexpected experimental results previously obtained in our laboratory. In particular, we have examined the detailed mechanisms for generating CH(2)CHO(‒) from the reaction of HO(‒) + CH(3)CH(2)OCH(2)CH(2)OCH(3), the unusually large isotope effect (k(D)/k(H) = 5.5) for the reaction of NH(2)(‒) + CH(3)CH(2)OCH(2)CH(3), and the possible kinetic barriers in the reaction of H(‒) + CH(3)CH(2)OCH(2)CH(3). Moreover, we have explored the high site selectivity in the reaction of NH(2)(‒) + CH(3)CH(2)OC(CH(3))(3). In the HO(‒) + CH(3)CH(2)OCH(2)CH(2)OCH(3) reaction, three ion‒neutral encounter complexes were located and fully optimized. The corresponding transition states were confirmed during the first E2 hydrogen-transfer process and they all possess E1(cb)-like antiperiplanar conformations. The formation of loosely bonded CH(3)O(‒) and H(2)O moieties was found to be essential for the second E2-type hydrogen transfer, and an intriguing E1(cb)-like gauche transition state (CH(3)OH-Cα-Cβ- OCHCH(2) dihedral = 40.9°) is located, which results in the formation of ionic CH(2)CHO(‒) and neutral CH(3)OH, H(2)O and C(2)H(4) products. The lowest kinetic barrier for the reaction of NH(2)(‒) + CH(3)CH(2)OCH(2)CH(3) is 5.3 kcal mol(‒1) (1 kcal mol(‒1) = 4.2 kJ mol(‒1)), which is 1.5 kcal mol(‒1) higher in energy than the lowest barrier for the reaction HO(‒) + CH(3)CH(2)OCH(2)CH(3). The higher kinetic barrier of the NH(2)(‒) + CH(3)CH(2)OCH(2)CH(3) reaction is consistent with the observation of a larger isotope effect. The lowest kinetic barrier for the reaction of H(‒) + CH(3)CH(2)OCH(2)CH(3) is +5.4 kcal mol(‒1), indicating that, although H(‒) is a strong base, this reaction cannot occur at room temperature, which agrees well with the experimental results. The high selectivity in the formation of CH(3)CH(2)O(‒) from the reaction of NH(2)(‒) + CH(3)CH(2)OC(CH(3))(3) is explained by an electrostatic potential analysis of the ether molecule. Thus, this computational study provides important insight into the detailed mechanisms of elimination reactions.

Reactivity in the nucleophilic aromatic substitution reactions of pyridinium ions

The "element effect" in nucleophilic aromatic substitution reactions (SNAr) is characterized by the leaving group order, L = F > NO2 > Cl ≈ Br > I, in activated aryl substrates. A different leaving group order is observed in the substitution reactions of ring-substituted N-methylpyridinium compounds with piperidine in methanol: 2-CN ≥ 4-CN > 2-F ∼ 2-Cl ∼ 2-Br ∼ 2-I. The reactions are second-order in [piperidine], the mechanism involving rate determining hydrogen-bond formation between piperidine and the substrate-piperidine addition intermediate followed by deprotonation of this intermediate. Computational results indicate that deprotonation of the H-bonded complex is probably barrier free, and is accompanied by simultaneous loss of the leaving group (E2) for L = Cl, Br, and I, but with subsequent, rapid loss of the leaving group (E1cB-like) for the poorer leaving groups, CN and F. The approximately 50-fold greater reactivity of the 2- and 4-cyano substrates is attributed to the influence of the electron withdrawing cyano group in the deprotonation step. The results provide another example of β-elimination reactions poised near the E2-E1cB mechanistic borderline.

The conformational behavior, geometry and energy parameters of Menshutkin-like reaction of O-isopropylidene-protected glycofuranoid mesylates in view of DFT calculations

The formation of pyridinium salts in the transformation of three O-isopropylidene-protected mesylates of furanoid sugar derivatives under pyridine action is considered at the B3LYP/6-31+G** computation level. All the structures were optimized in the gas phase, in chloroform and water. Activation barrier heights in the gas phase were also estimated at the B3LYP/6-311++G**, MPW1K/6-31+G** and MPW1K/6-311++G** levels. The conducted calculations, both in the gas phase (regardless of the computation level) and in solvents, revealed the barrier height increasing order as follows: 1>2>3 for the three reactions studied. The conformational behavior of the five-membered ring is discussed in the gas phase and in solvents. The fused dioxolane ring makes the furanoid ring less likely to undergo conformational changes. In the case of reaction 3, the furanoid ring shape does not change either in the gas phase or in solvents. All conformers are close to E0 or (0)E.

Computational electrochemistry: prediction of liquid-phase reduction potentials

This article reviews recent developments and applications in the area of computational electrochemistry. Our focus is on predicting the reduction potentials of electron transfer and other electrochemical reactions and half-reactions in both aqueous and nonaqueous solutions. Topics covered include various computational protocols that combine quantum mechanical electronic structure methods (such as density functional theory) with implicit-solvent models, explicit-solvent protocols that employ Monte Carlo or molecular dynamics simulations (for example, Car-Parrinello molecular dynamics using the grand canonical ensemble formalism), and the Marcus theory of electronic charge transfer. We also review computational approaches based on empirical relationships between molecular and electronic structure and electron transfer reactivity. The scope of the implicit-solvent protocols is emphasized, and the present status of the theory and future directions are outlined.

A computational study of acid catalyzed aerosol reactions of atmospherically relevant epoxides

Epoxides are important intermediates of atmospheric isoprene oxidation. Their subsequent reactions in the particle phase lead to the production of organic compounds detected in ambient aerosols. We apply density functional theory to determine the important kinetic factors that drive epoxide reactions in the particle phase. Specifically, the importance of acid catalysis and solvent polarity are investigated using a variety of epoxides and nucleophiles. The condensed phase is modeled using molecular clusters immersed in a dielectric continuum and a majority of the calculations are performed with the M062x density functional and the 6-311++G** basis set. Calculations of acid catalyzed epoxide hydrolysis transition states for simple primary, secondary and tertiary epoxides are consistent with an A-2 mechanism where the nucleophile (water) interacts with an epoxide carbon in the transition state. By applying transition state theory to this mechanism, the overall rate constants of epoxide reactions such as hydrolysis, organosulfate formation, organonitrate formation and oligomerization are determined. The calculations indicate that the acid catalyzed hydrolysis rate constant of 2-methyl-2,3-epoxybutane-1,4-diol (β-IEPOX--an isoprene epoxide produced under low NOx conditions) is approximately 30 times greater than 2-methyl-2,3-epoxypropanoic acid (MAE--methacrylic acid epoxide derived from isoprene and produced at high NOx concentrations). Furthermore, acid catalyzed organosulfate formation and epoxide oligomerization reactions are competitive and appear to be kinetically favorable over the hydrolysis of IEPOX.

Unravelling the mechanism of the asymmetric hydrogenation of acetophenone by [RuX2(diphosphine)(1,2-diamine)] catalysts

The mechanism of catalytic hydrogenation of acetophenone by the chiral complex trans-[RuCl2{(S)-binap}{(S,S)-dpen}] and KO-t-C4H9 in propan-2-ol is revised on the basis of DFT computations carried out in dielectric continuum and the most recent experimental observations. The results of these collective studies suggest that neither a six-membered pericyclic transition state nor any multibond concerted transition states are involved. Instead, a hydride moiety is transferred in an outer-sphere manner to afford an ion-pair, and the corresponding transition state is both enantio- and rate-determining. Heterolytic dihydrogen cleavage proceeds neither by a (two-bond) concerted, four-membered transition state, nor by a (three-bond) concerted, six-membered transition state mediated by a solvent molecule. Instead, cleavage of the H-H bond is achieved via deprotonation of the η(2)-H2 ligand within a cationic Ru complex by the chiral conjugate base of (R)-1-phenylethanol. Thus, protonation of the generated (R)-1-phenylethoxide anion originates from the η(2)-H2 ligand of the cationic Ru complex and not from NH protons of a neutral Ru trans-dihydride complex, as initially suggested within the framework of a metal-ligand bifunctional mechanism. Detailed computational analysis reveals that the 16e(-) Ru amido complex [RuH{(S)-binap}{(S,S)-HN(CHPh)2NH2}] and the 18e(-) Ru alkoxo complex trans-[RuH{OCH(CH3)(R)}{(S)-binap}{(S,S)-dpen}] (R = CH3 or C6H5) are not intermediates within the catalytic cycle, but rather are off-loop species. The accelerative effect of KO-t-C4H9 is explained by the reversible formation of the potassium amidato complexes trans-[RuH2{(S)-binap}{(S,S)-N(K)H(CHPh)2NH2}] or trans-[RuH2{(S)-binap}{(S,S)-N(K)H(CHPh)2NH(K)}]. The three-dimensional (3D) cavity observed within these molecules results in a chiral pocket stabilized via several different noncovalent interactions, including neutral and ionic hydrogen bonding, cation-π interactions, and π-π stacking interactions. Cooperatively, these interactions modify the catalyst structure, in turn lowering the relative activation barrier of hydride transfer by ~1-2 kcal mol(-1) and the following H-H bond cleavage by ~10 kcal mol(-1), respectively. A combined computational study and analysis of recent experimental data of the reaction pool results in new mechanistic insight into the catalytic cycle for hydrogenation of acetophenone by Noyori's catalyst, in the presence or absence of KO-t-C4H9.

Concerted or stepwise: how much do free-energy landscapes tell us about the mechanisms of elimination reactions?

The base-catalyzed dehydration of benzene cis-1,2-dihydrodiols is driven by formation of an aromatic product as well as intermediates potentially stabilized by hyperaromaticity. Experiments exhibit surprising shifts in isotope effects, indicating an unusual mechanistic balance on the E2-E1cB continuum. In this study, both 1- and 2-dimensional free energy surfaces are generated for these compounds with various substituents, using density functional theory and a mixed implicit/explicit solvation model. The computational data help unravel hidden intermediates along the reaction coordinate and provide a novel conceptual framework for distinguishing between competing pathways in this and any other system with borderline reaction mechanisms.

DFT studies of conversion of methyl chloride and three substituted chloromethyl tetrahydrofuran derivatives during reaction with trimethylamine

B3LYP/6-31+G** level computations were performed for the formation of four trimethylammonium salts in the reaction of methyl chloride (1a), (S)-1,4-andydro-5-chloro-2,3,5-trideoxypentitol (2a), (2S,5S)-2,5-andydro-6-chloro-1,3,4,6-tetradeoxyhexitol (3a) and methyl 5-chloro-2,3,5-trideoxy-β-D-pentofuranoside (4a) with trimethylamine. All the structures were fully optimized in the gas phase, in chloroform and water. In addition, B3LYP/6-311++G** and MPW1K/6-31+G** level calculations were carried out to estimate activation barrier heights in the gas phase. A detailed description of all stationary points is presented, and the conformational behavior of the THF ring is discussed. B3LYP and MPW1K activation barriers indicate the reaction between methyl chloride and trimethylamine to be the fastest, whereas reaction 4 is the slowest one, both in the gas phase and in solvents. THF ring conformation changes were observed for reactions 2 and 3 along the reaction pathway, whereas it was almost unchanged for reaction 4, in the gas phase. In the case of reactions 2 and 3, different shapes of the THF ring were found for the transition state geometry in the gas phase and in water. The ⁵E→E₄ and ³E→E₅ conformational changes were observed for reactions 2 and 3, respectively.

Graphical abstract

Stereochemistry of 1,2-elimination and proton-transfer reactions: toward a unified understanding

Many mechanistic and stereochemical studies have focused on the breaking of the C-H bond through base-catalyzed elimination reactions. When we began our research, however, chemists knew almost nothing about the stereospecificity of addition-elimination reactions involving conjugated acyclic carbonyl compounds, even though the carbonyl group is a pivotal functional group in organic chemistry. Over the last 25 years, we have studied the addition-elimination reactions of β-substituted acyclic esters, thioesters, and ketones in order to reach a comprehensive understanding of how electronic effects influence their stereochemistry. This Account brings together our understanding of the stereochemistry of 1,2-elimination and proton-transfer reactions, describing how each study has built upon previous work and contributed to our understanding of this field. When we began, chemists thought that anti stereospecificity in base-catalyzed 1,2-elimination reactions occurred via concerted E2 mechanisms, which provide a smooth path for anti elimination. Unexpectedly, we discovered that some E1cBirrev reactions produce the same anti stereospecificity as E2 reactions even though they proceed through diffusionally equilibrated, "free" enolate-anion intermediates. This result calls into question the conventional wisdom that anti stereochemistry must result from a concerted mechanism. While carrying out our research, we developed insights ranging from the role of historical contingency in the evolution of hydratase-dehydratase enzymes to the influence of buffers on the stereochemistry of H/D exchange in D2O. Negative hyperconjugation is the most important concept for understanding our results. This idea provides a unifying view for the largely anti stereochemistry in E1cBirrev elimination reactions and a basis for understanding the stereoelectronic influence of electron-withdrawing β-substituents on proton-transfer reactions.

DFT studies of the conversion of four mesylate esters during reaction with ammonia

The energetics of the Menshutkin-like reaction between four mesylate derivatives and ammonia have been computed using B3LYP functional with the 6-31+G** basis set. Additionally, MPW1K/6-31+G** level calculations were carried out to estimate activation barrier heights in the gas phase. Solvent effect corrections were computed using PCM/B3LYP/6-31+G** level. The conversion of the reactant complexes into ion pairs is accompanied by a strong energy decrease in the gas phase and in all solvents. The ion pairs are stabilized with two strong hydrogen bonds in the gas phase. The bifurcation at C2 causes a significant activation barrier increase. Also, bifurcation at C5 leads to noticeable barrier height differentiation. Both B3LYP/6-31+G** and MPW1K/6-31+G** activation barriers suggest the reaction 2 (2a + NH3) to be the fastest in the gas phase. The reaction 4 is the slowest one in all environments.