New insights into poly(lactic-co-glycolic acid) microstructure: using repeating sequence copolymers to decipher complex NMR and thermal behavior

Chiral Acetal-Based Stereo-Controlled Degradable Polymer Synthesis

The precise synthesis of chiral polymers remains a significant challenge in polymer chemistry, particularly for applications in advanced biomedical and electronic materials. The development of degradable polymers is important for eco-friendly and advanced materials. Here, we introduce a stereo-controlled degradable polymer via cascade enyne metathesis polymerization and enantioselective acetal synthesis through Pd-catalyzed asymmetric hydroamination. This approach allows for the creation of chiral acetal-based polymers with controlled stereochemistry and degradability, highlighting their potential for use in drug delivery and electronic applications. This concept article reviews the background, development, and potential applications of these stereo-controlled degradable polymers.

Ring Opening Polymerization of Six- and Eight-Membered Racemic Cyclic Esters for Biodegradable Materials

The low percentage of recyclability of the polymeric materials obtained by olefin transition metal (TM) polymerization catalysis has increased the interest in their substitution with more eco-friendly materials with reliable physical and mechanical properties. Among the variety of known biodegradable polymers, linear aliphatic polyesters produced by ring-opening polymerization (ROP) of cyclic esters occupy a prominent position. The polymer properties are highly dependent on the macromolecule microstructure, and the control of stereoselectivity is necessary for providing materials with precise and finely tuned properties. In this review, we aim to outline the main synthetic routes, the physical properties and also the applications of three commercially available biodegradable materials: Polylactic acid (PLA), Poly(Lactic-co-Glycolic Acid) (PLGA), and Poly(3-hydroxybutyrate) (P3HB), all of three easily accessible via ROP. In this framework, understanding the origin of enantioselectivity and the factors that determine it is then crucial for the development of materials with suitable thermal and mechanical properties.

Pairing-Enhanced Regioselectivity: Synthesis of Alternating Poly(lactic-co-glycolic acid) from Racemic Methyl-Glycolide

Poly(lactic-co-glycolic acid) (PLGA) is used in vivo for various biomedical applications. Due to its biodegradability and biocompatibility, PLGA is uniquely suited for controlled drug delivery with parenteral administration. Previously, we established the synthesis of isotactic, alternating PLGA from enantiopure starting materials. Here, to fill in the gap of the current field, we have developed the synthesis of syndioenriched, alternating PLGA from racemic methyl-glycolide (rac-MeG). The synthesis of alternating PLGA is accomplished by a highly regioselective ring-opening polymerization of rac-MeG with an optimized racemic aluminum catalyst. Mechanistic studies are carried out to elucidate the pairing-enhanced catalyst regio- and stereocontrol. Polymer sequence fidelity has been established by NMR investigations, confirming a high degree of alternation of the comonomer sequence and moderate syndiotacticity within the backbone stereoconfiguration. The resulting syndioenriched material is amorphous, which will facilitate the drug complexation behavior.

Digital synthetic polymers for information storage

Digital synthetic polymers with uniform chain lengths and defined monomer sequences have recently become intriguing alternatives to traditional silicon-based information devices or natural biomacromolecules for data storage. The structural diversity of information-containing macromolecules endows the digital synthetic polymers with higher stability and storage density but less occupied space. Through subtly designing each unit of coded structure, the information can be readily encoded into digital synthetic polymers in a more economical scheme and more decodable, opening up new avenues for molecular digital data storage with high-level security. This tutorial review summarizes recent advances in salient features of digital synthetic polymers for data storage, including encoding, decoding, editing, erasing, encrypting, and repairing. The current challenges and outlook are finally discussed to offer potential solution guidance and new perspectives for the creation of next-generation digital synthetic polymers and broaden the scope of their applicability.

Nondestructive Sequencing of Enantiopure Oligoesters by Nuclear Magnetic Resonance Spectroscopy

Sequence-defined synthetic oligomers and polymers are promising molecular media for permanently storing digital information. However, the information decoding process relies on degradative sequencing methods such as mass spectrometry, which consumes the information-storing polymers upon decoding. Here, we demonstrate the nondestructive decoding of sequence-defined oligomers of enantiopure α-hydroxy acids, oligo(l-mandelic-co-d-phenyl lactic acid)s (oMPs), and oligo(l-lactic-co-glycolic acid)s (oLGs) by 13C nuclear magnetic resonance spectroscopy. We were able to nondestructively decode a bitmap image (192 bits) encoded using a library of 12 equimolar mixtures of an 8-bit-storing oMP and oLG, synthesized through semiautomated flow chemistry in less than 1% of the reaction time required for the repetition of conventional batch reactions. Our results highlight the potential of bundles of sequence-defined oligomers as efficient media for encoding and decoding large-scale information based on the automation of their synthesis and nondestructive sequencing processes.

Spotting Trends in Organocatalyzed and Other Organomediated (De)polymerizations and Polymer Functionalizations

Organocatalysis has evolved into an effective complement to metal- or enzyme-based catalysis in polymerization, polymer functionalization, and depolymerization. The ease of removal and greater sustainability of organocatalysts relative to transition-metal-based ones has spurred development in specialty applications, e.g., medical devices, drug delivery, optoelectronics. Despite this, the use of organocatalysis and other organomediated reactions in polymer chemistry is still rapidly developing, and we envisage their rapidly growing application in nascent areas such as controlled radical polymerization, additive manufacturing, and chemical recycling in the coming years. In this Review, we describe ten trending areas where we anticipate paradigm shifts resulting from novel organocatalysts and other transition-metal-free conditions. We highlight opportunities and challenges and detail how new discoveries could lead to previously inaccessible functional materials and a potentially circular plastics economy.

Controlling Rheology of Fluid Interfaces through Microblock Length of Sequence-Controlled Amphiphilic Copolymers

Previous studies have demonstrated that films of sequence-controlled amphiphilic copolymers display contact angles that depend on microblock size. This suggests that microblock length may provide a means of tuning surface and interfacial properties. In this work, the interfacial rheology of a series of sequence-controlled copolymers, prepared through the addition of bicyclo[4.2.0]oct-1(8)-ene-8-carboxamide (monomer A) and cyclohexene (monomer B) to generate sequences up to 24 monomeric units composed of (A m B n ) i microblocks, where m, n, and i range from 1 to 6. Interfacial rheometry is used to measure the mechanical properties of an air-water interface with these copolymers. As the microblock size increases, the interfacial storage modulus, G', increases, which may be due to an increase in the size of interfacial hydrophobic domains. Small-angle X-ray scattering shows that the copolymers have a similar conformation in solution, suggesting that any variations in the mechanics of the interface are due to assembly at the interface, and not on solution association or bulk rheological properties. This is the first study demonstrating that microblock size can be used to control interfacial rheology of amphiphilic copolymers. Thus, the results provide a new strategy for controlling the dynamics of fluid interfaces through precision sequence-controlled polymers.

Electrospun Fibrous Membrane with Confined Chain Configuration: Dynamic Relaxation and Glass Transition

Thermodynamic glass transition processes of electrospun membranes were first introduced to study their dynamic relaxation nature, which is not constantly in equilibrium. The relaxation modes of electrospun membranes are slow but measurable near and above the Tg, given the stretched chain over long distances. Based on differential scanning calorimetry (DSC) experiments and the general principle of mode-coupling theory (MCT), endothermic peak temperature and relaxation enthalpy were used to analyze the relaxation process by capturing these instantaneous “arrested” structures. The short- and long-wavelength relaxation modes could be identified with different annealing times and temperatures relative to DSC-measured Tg for electrospun membranes with different molecular weights. Results clearly showed the dynamic nature of a glass transition in polymeric materials. Tp and enthalpy loss initially increased and then directly decreased with the increase in annealing time. When Ta > Tg, regardless of the size of the molecular weight, the Tp and enthalpy loss of the PLGA fibers would directly decrease, and the curves would shift toward the melted one. Combination of electrospinningand normal DSC instrument can be used to investigating the dynamic relax process through an adequately designed kinetic scanning procedure. This result can be explained by the general principle of MCT-type dynamic theory.

Ultrafast ring-opening copolymerization of lactide with glycolide toward random poly(lactic-co-glycolic acid) copolymers by organophosphazene base and urea binary catalysts

The preparation of poly(lactic-co-glycolic acid) (PLGA) copolymers with controllable random microstructures remains as a challenge due to the much higher reactivity of glycolide (GA) compared to lactide (LA). In this...

Effect of polymer source variation on the properties and performance of risperidone microspheres

Owing to their inherent heterogeneity, determination of similarity of poly (lactic-co-glycolic acid) (PLGA) polymers is very challenging. The complexity in controlling PLGA characteristics has been recognized as an obstacle to the development of PLGA based long-acting complex drug products (such as microspheres). The objectives of the present study were: (1) to determine minor differences in the physicochemical characteristics (such as inherent viscosity, molecular weight (Mw), monomer ratio (L/G ratio), glass transition temperature (Tg), and blockiness) as well as in the hydrolytic degradation profiles of PLGAs from different sources; and (2) to investigate the impact of PLGAs from different sources on the properties and in vitro performance of risperidone microspheres. Four PLGA polymers were purchased from different sources with similar inherent viscosity and/or Mw, L/G ratio and end groups as per the manufacturers' certificate of analysis (CoA). The physicochemical properties of these PLGAs were characterized using the same in-house methods and exhibited differences in inherent viscosity, Mw, blockiness and residue amount. Risperidone was chosen as the model drug and four microsphere formulations were prepared via the same solvent extraction/evaporation method using the PLGAs from different sources. The critical quality attributes of the microspheres (such as particle size, porosity and average pore diameter) and their in vitro release characteristics (burst effect and release rate) were shown to be different. A strong linear correlation was established between risperidone release and PLGA blockiness. This is the first time that such a correlation has been established, which promotes the potential need to further investigate the impact of PLGA blockiness on other PLGA based controlled release drug products.

Degradable polymers via olefin metathesis polymerization

The development of degradable polymers has commanded significant attention over the past half century. Approaches have predominantly relied on ring-opening polymerization of cyclic esters (e.g., lactones, lactides) and N-carboxyanhydrides, as well as radical ring-opening polymerizations of cyclic ketene acetals. In recent years, there has been a significant effort applied to expand the family of degradable polymers accessible via olefin metathesis polymerization. Given the excellent functional group tolerance of olefin metathesis polymerization reactions generally, a broad range of conceivable degradable moieties can be incorporated into appropriate monomers and thus into polymer backbones. This approach has proven particularly versatile in synthesizing a broad spectrum of degradable polymers including poly(ester), poly(amino acid), poly(acetal), poly(carbonate), poly(phosphoester), poly(phosphoramidate), poly(enol ether), poly(azobenzene), poly(disulfide), poly(sulfonate ester), poly(silyl ether), and poly(oxazinone) among others. In this review, we will highlight the main olefin metathesis polymerization strategies that have been used to access degradable polymers, including (i) acyclic diene metathesis polymerization, (ii) entropy-driven and (iii) enthalpy-driven ring-opening metathesis polymerization, as well as (iv) cascade enyne metathesis polymerization. In addition, the livingness or control of polymerization reactions via different strategies are highlighted and compared. Potential applications, challenges and future perspectives of this new library of degradable polyolefins are discussed. It is clear from recent and accelerating developments in this field that olefin metathesis polymerization represents a powerful synthetic tool towards degradable polymers with novel structures and properties inaccessible by other polymerization approaches.

Effect of polymer source on in vitro drug release from PLGA microspheres

Determination of the qualitative (Q1) sameness of poly (lactic-co-glycolic acid) (PLGA) polymers can be very challenging due to PLGA being a random copolymer with inherent heterogeneity. Performance variation of PLGA microsphere drug product as a result of altered PLGA characteristics has been recognized as a critical limiting factor in product development. It has been reported that PLGA characteristics and degradation profiles are sensitive to minor differences in the manufacturing and control processes. Accordingly, the objectives of the present research were: 1) to determine minor differences in the physicochemical properties (such as inherent viscosity/molecular weight (Mw), blockiness, and glass transition temperature (Tg)) and the hydrolytic degradation profiles of PLGA polymers from different sources; and 2) to investigate the impact of any differences determined in (1) on the physicochemical properties (Q3) and in vitro release of leuprolide acetate microspheres. PLGA polymers were purchased from three different sources with similar inherent viscosity/Mw, monomer (Lactide/Glycolide) ratio, and end group as per the manufacturers' certificate of analysis (COA). These PLGA polymers were evaluated using the same in-house methods and showed differences in their properties such as Mw and blockiness. Three compositionally equivalent leuprolide acetate microspheres were prepared via a solvent evaporation method using the three PLGA polymers from different sources. The prepared microspheres showed differences in their physicochemical properties (such as particle size, porosity and average pore diameter) as well as in their in vitro drug release characteristics (burst effect and release rate). These results indicate that polymer source related variations have the potential to significantly impact the Q3 sameness and therapeutic performance of long-acting PLGA microspheres. The fundamental understanding gained on polymer properties will make a critical contribution to the development of quality control strategies as well as to future regulatory guidance on the evaluation of such complex drug products.

Sequence Control from Mixtures: Switchable Polymerization Catalysis and Future Materials Applications

There is an ever-increasing demand for higher-performing polymeric materials counterbalanced by the need for sustainability throughout the life cycle. Copolymers comprising ester, carbonate, or ether linkages could fulfill some of this demand as their monomer-polymer chemistry is closer to equilibrium, facilitating (bio)degradation and recycling; many monomers are or could be sourced from renewables or waste. Here, an efficient and broadly applicable route to make such copolymers is discussed, a form of switchable polymerization catalysis which exploits a single catalyst, switched between different catalytic cycles, to prepare block sequence selective copolymers from monomer mixtures. This perspective presents the principles of this catalysis, catalyst design criteria, the selectivity and structural copolymer characterization tools, and the properties of the resulting copolymers. Uses as thermoplastic elastomers, toughened plastics, adhesives, and self-assembled nanostructures, and for programmed degradation, among others, are discussed. The state-of-the-art research into both catalysis and products, as well as future challenges and directions, are presented.

Degradation in Order: Simple and Versatile One-Pot Combination of Two Macromolecular Concepts to Encode Diverse and Spatially Regulated Degradability Functions

The clever one-pot combination of two macromolecular concepts, ring-opening polymerization (ROP) and step-growth polymerization (SGP), is demonstrated to be a simple, yet powerful tool to design a library of sequence-controlled polymers with diverse and spatially regulated degradability functions. ROP and SGP occur sequentially at room temperature when the organocatalytic conditions are switched from basic to acidic, and each allows the encoding of specific degradable bonds. ROP controls the sequence length and position of the degradability functions, while SGP between the complementary vinyl ether and hydroxyl chain-ends enables the formation of acetal bonds and high-molar-mass copolymers. The result is the rational combination of cleavable bonds prone to either bulk or surface erosion within the same macromolecule. The strategy is versatile and offers higher chemical diversity and level of control over the primary structure than current aliphatic polyesters or polycarbonates, while being simple, effective, and atom-economical and having potential for scalability.

Geared Toward Applications: A Perspective on Functional Sequence-Controlled Polymers

Sequence-controlled polymers are an emerging class of synthetic polymers with a regulated sequence of monomers. In the past decade, tremendous progress has been made in the synthesis of polymers with the sophisticated sequence control approaching the level manifested in biopolymers. In contrast, the exploration of novel functions that can be achieved by controlling synthetic polymer sequences represents an emerging focus in polymer science. This Viewpoint will survey recent advances in the functional applications of sequence-controlled polymers and provide a perspective on the challenges and outlook for pursuing future applications of this fascinating class of macromolecules.

Rapid and Scalable Access to Sequence-Controlled DHDM Multiblock Copolymers by FLP Polymerization

An immortal N-(diphenylphosphanyl)-1,3-diisopropyl-4,5-dimethyl-1,3-dihydro-2H-imidazol-2-imine/diisobutyl (2,6-di-tert-butyl-4-methylphenoxy) aluminum (P(NIⁱ Pr)Ph₂ /(BHT)Alⁱ Bu₂ )-based frustrated Lewis pair (FLP) polymerization strategy is presented for rapid and scalable synthesis of the sequence-controlled multiblock copolymers at room temperature. Without addition of extra initiator or catalyst and complex synthetic procedure, this method enabled a tripentacontablock copolymer (n=53, k=4, dp_n =50) to be achieved with the highest reported block number (n=53) and molecular weight (M_n =310 kg mol^-1 ) within 30 min. More importantly, this FLP polymerization strategy provided access to the multiblock copolymers with tailored properties by precisely adjusting the monomer sequence and block numbers.

High-density information storage in an absolutely defined aperiodic sequence of monodisperse copolyester

Synthesis of a polymer composed of a large discrete number of chemically distinct monomers in an absolutely defined aperiodic sequence remains a challenge in polymer chemistry. The synthesis has largely been limited to oligomers having a limited number of repeating units due to the difficulties associated with the step-by-step addition of individual monomers to achieve high molecular weights. Here we report the copolymers of α-hydroxy acids, poly(phenyllactic-co-lactic acid) (PcL) built via the cross-convergent method from four dyads of monomers as constituent units. Our proposed method allows scalable synthesis of sequence-defined PcL in a minimal number of coupling steps from reagents in stoichiometric amounts. Digital information can be stored in an aperiodic sequence of PcL, which can be fully retrieved as binary code by mass spectrometry sequencing. The information storage density (bit/Da) of PcL is 50% higher than DNA, and the storage capacity of PcL can also be increased by adjusting the molecular weight (~38 kDa).

Substituted glycolides from natural sources: preparation, alcoholysis and polymerization

Herein we present a comparative study of substituted glycolides MeGL, iPrGL, iBuGL, BnGL, PhGL and MePhGL, synthesized from natural sources and polymers therefrom.

Synthesis and stereocomplex formation of enantiomeric alternating copolymers with two types of chiral centers, poly(lactic acid-alt-2-hydroxybutanoic acid)s

Stereocomplex (SC) formation was reported for the first time for enantiomeric alternating copolymers consisting of repeating units with two types of chiral centers, poly(lactic acid-alt-2-hydroxybutanoic acid)s [P(LA-alt-2HB)s]. l,l-Configured poly(l-lactic acid-alt-l-2-hydroxybutanoic acid) [P(LLA-alt-l-2HB)] and d,d-configured poly(d-lactic acid-alt-d-2-hydroxybutanoic acid) [P(DLA-alt-d-2HB)] were amorphous. Blends of P(LLA-alt-l-2HB) and P(DLA-alt-d-2HB) were crystallizable and showed typical SC-type wide-angle X-ray diffraction profiles similar to those reported for stereocomplexed blends of poly(l-lactic acid) and poly(d-lactic acid) homopolymers and of poly(l-2-hydroxybutanoic acid) and poly(d-2-hydroxybutanoic acid) homopolymers, and of l,l-configured poly(l-lactic acid-co-l-2-hydroxybutanoic acid) [P(LLA-co-l-2HB)] and d,d-configured poly(d-lactic acid-co-d-2-hydroxybutanoic acid) [P(DLA-co-d-2HB)] random copolymers. The melting temperature values and melting enthalpy values at 100% crystallinity for stereocomplexed solvent-evaporated and precipitated P(LLA-alt-l-2HB)/P(DLA-alt-d-2HB) blends were correspondingly 187.5 and 187.9 °C, and 98.1 and 91.8 J g⁻¹. Enantiomeric polymer blending of P(LLA-alt-l-2HB) and P(DLA-alt-d-2HB) can confer crystallizability by stereocomplexation and the biodegradable materials with a wide variety of physical properties and biodegradability are highly expected to be prepared by synthesis of alternating copolymers of various combinations of two types of chiral α-substituted 2-hydroxyalkanoic acid monomers and their SC crystallization.

Stereocomplex formation was reported for alternating copolymers of chiral α-substituted 2-hydroxyalkanoic acids which can be utilized for preparation of biodegradable materials with a variety of physical properties and biodegradability.

An organocatalytic ring-opening polymerization approach to highly alternating copolymers of lactic acid and glycolic acid

Highly regioselective ring-opening polymerization of optically active methylglycolides was achived using P₂-t-Bu/alcohol system to produce alternating copolymer of lactic acid and glycolic acid.

Fundamental insights in PLGA degradation from thin film studies

Poly(lactide-co-glycolide)s are commercially available degradable implant materials, which are typically selected based on specifications given by the manufacturer, one of which is their molecular weight. Here, we address the question whether variations in the chain length and their distribution affect the degradation behavior of Poly[(rac-lactide)-co-glycolide]s (PDLLGA). The hydrolysis was studied in ultrathin films at the air-water interface in order to rule out any morphological effects. We found that both for purely hydrolytic degradation as well as under enzymatic catalysis, the molecular weight has very little effect on the overall degradation kinetics of PDLLGAs. The quantitative analysis suggested a random scission mechanism. The monolayer experiments showed that an acidic micro-pH does not accelerate the degradation of PDLLGAs, in contrast to alkaline conditions. The degradation experiments were combined with interfacial rheology measurements, which showed a drastic decrease of the viscosity at little mass loss. The extrapolated molecular weight behaved similar to the viscosity, dropping to a value near to the solubility limit of PDLLGA oligomers before mass loss set in. This observation suggests a solubility controlled degradation of PDLLGA. Conclusively, the molecular weight affects the degradation of PDLLGA devices mostly in indirect ways, e.g. by determining their morphology and porosity during fabrication. Our study demonstrates the relevance of the presented Langmuir degradation method for the design of controlled release systems.

Tunable biomaterials from synthetic, sequence-controlled polymers

Polymeric biomaterials have many applications including therapeutic delivery vehicles, medical implants and devices, and tissue engineering scaffolds. Both naturally-derived and synthetic materials have successfully been used for these applications in the clinic. However, the increasing complexity of these applications requires materials with advanced properties, especially customizable or tunable materials with bioactivity. To address this issue, there have been recent efforts to better recapitulate the properties of natural materials using synthetic biomaterials composed of sequence-controlled polymers. Sequence control mimics the primary structure found in biopolymers, and in many cases, provides an extra handle for functionality in synthetic polymers. Here, we first review the advances in synthetic methods that have enabled sequence-controlled biomaterials on a relevant scale, and discuss strategies for choosing functional sequences from a biomaterials engineering context. Then, we highlight several recent studies that show strong impact of sequence control on biomaterial properties, including in vitro and in vivo behavior, in the areas of hydrogels, therapeutic materials, and novel applications such as molecular barcodes for medical devices. The role of sequence control in biomaterials properties is an emerging research area, and there remain many opportunities for investigation. Further study of this topic may significantly advance our understanding of bioactive or smart materials, as well as contribute design rules to guide the development of synthetic biomaterials for future applications in tissue engineering and regenerative medicine.

Sequence-Controlled Polymers Through Entropy-Driven Ring-Opening Metathesis Polymerization: Theory, Molecular Weight Control, and Monomer Design

The bulk properties of a copolymer are directly affected by monomer sequence, yet efficient, scalable, and controllable syntheses of sequenced copolymers remain a defining challenge in polymer science. We have previously demonstrated, using polymers prepared by a step-growth synthesis, that hydrolytic degradation of poly(lactic- co-glycolic acid)s is dramatically affected by sequence. While much was learned, the step-growth mechanism gave no molecular weight control, unpredictable yields, and meager scalability. Herein, we describe the synthesis of closely related sequenced polyesters prepared by entropy-driven ring-opening metathesis polymerization (ED-ROMP) of strainless macromonomers with imbedded monomer sequences of lactic, glycolic, 6-hydroxy hexanoic, and syringic acids. The incorporation of ethylene glycol and metathesis linkers facilitated synthesis and provided the olefin functionality needed for ED-ROMP. Ring-closing to prepare the cyclic macromonomers was demonstrated using both ring-closing metathesis and macrolactonization reactions. Polymerization produced macromolecules with controlled molecular weights on a multigram scale. To further enhance molecular weight control, the macromonomers were prepared with cis-olefins in the metathesis-active segment. Under these selectivity-enhanced (SEED-ROMP) conditions, first-order kinetics and narrow dispersities were observed and the effect of catalyst initiation rate on the polymerization was investigated. Enhanced living character was further demonstrated through the preparation of block copolymers. Computational analysis suggested that the enhanced polymerization kinetics were due to the cis-macrocyclic olefin being less flexible and having a larger population of metathesis-reactive conformers. Although used for polyesters in this investigation, SEED-ROMP represents a general method for incorporation of sequenced segments into molecular weight-controlled polymers.