Coordination Copolymerization Mediated by Zn4O(CO2R)6 Metal Clusters: a Balancing Act between Statistics and Geometry

A three-component hydrogen bonded framework

A porous three-component hydrogen bonded framework, 1⋅biphen⋅TP, was prepared from a tetra-amidinium component (14+) and two different dianions, benzene-1,4-dicarboxylate (terephthalate, TP2-) and biphenyl-4,4'-dicarboxylate (biphen2-). Interestingly, when the framework was prepared in ethanol/water, 1⋅biphen⋅TP forms even when an excess of either dicarboxylate is present. However, when only water is used as solvent, only two-component frameworks are formed.

Multicomponent Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are constructed from metal ions or clusters and organic linkers. Typical MOFs are rather simple, comprising just one type of joint and linker. An additional degree of structural complexity can be introduced by using multiple different components that are assembled into the same framework In the early days of MOF chemistry, conventional wisdom held that attempting to prepare frameworks starting from such a broad set of components would lead to multiple different phases. However, this review highlights how this view was mistaken and frameworks comprising multiple different components can be deliberately designed and synthesized. When coupled to structural order and periodicity, the presence of multiple components leads to exceptional functional properties that can be understood at the atomic level.

Cyclobutanedicarboxylate Metal-Organic Frameworks as a Platform for Dramatic Amplification of Pore Partition Effect

Ultrafine tuning of MOF structures at subangstrom or picometer levels can help improve separation selectivity for gases with subtle differences. However, for MOFs with a large enough pore size, the effect from ultrafine tuning on sorption can be muted. Here we show an integrative strategy that couples extreme pore compression with ultrafine pore tuning. This strategy is made possible by unique combination of two features of the partitioned acs (pacs) platform: multimodular framework and exceptional tolerance toward isoreticular replacement. Specifically, we use one module (ligand 1, L1) to shrink the pore size to an extreme minimum on pacs. A compression ratio of about 30% was achieved (based on the unit cell c/a ratio) from prototypical 1,4-benzenedicarboxylate-pacs to trans-1,3-cyclobutanedicarboxylate-pacs. This is followed by using another module (ligand 2, L2) for ultrafine pore tuning (<3% compression). This L1-L2 strategy increases the C2H2/CO2 selectivity from 2.6 to 20.8 and gives rise to an excellent experimental breakthrough performance. As the shortest cyclic dicarboxylate that mimics p-benzene-based moieties using a bioisosteric (BIS) strategy on pacs, trans-1,3-cyclobutanedicarboxylate offers new opportunities in MOF chemistry.

Metal-Organic Framework-Based Colloidal Particle Synthesis, Assembly, and Application

Metal-organic frameworks (MOFs) assembled from metal nodes and organic ligands have received significant attention over the past two decades for their fascinating porous properties and broad applications. Colloidal MOFs (CMOFs) not only inherit the intrinsic properties of MOFs, but can also serve as building blocks for self-assembly to make functional materials. Compared to bulk MOFs, the colloidal size of CMOFs facilitates further manipulation of CMOF particles in a single or collective state in a liquid medium. The resulting crystalline order obtained by self-assembly in position and orientation can effectively improve performance. In this review, we summarize the latest developments of CMOFs in synthesis strategies, self-assembly methods, and related applications. Finally, we discuss future challenges and opportunities of CMOFs in synthesis and assembly, by which we hope that CMOFs can be further developed into new areas for a wider range of applications.

Synthesis and Biomedical Applications of Highly Porous Metal-Organic Frameworks

In this review, aspects of the synthesis, framework topologies, and biomedical applications of highly porous metal-organic frameworks are discussed. The term "highly porous metal-organic frameworks" (HPMOFs) is used to denote MOFs with a surface area larger than 4000 m² g^-1. Such compounds are suitable for the encapsulation of a variety of large guest molecules, ranging from organic dyes to drugs and proteins, and hence they can address major contemporary challenges in the environmental and biomedical field. Numerous synthetic approaches towards HPMOFs have been developed and discussed herein. Attempts are made to categorise the most successful synthetic strategies; however, these are often not independent from each other, and a combination of different parameters is required to be thoroughly considered for the synthesis of stable HPMOFs. The majority of the HPMOFs in this review are of special interest not only because of their high porosity and fascinating structures, but also due to their capability to encapsulate and deliver drugs, proteins, enzymes, genes, or cells; hence, they are excellent candidates in biomedical applications that involve drug delivery, enzyme immobilisation, gene targeting, etc. The encapsulation strategies are described, and the MOFs are categorised according to the type of biomolecule they are able to encapsulate. The research field of HPMOFs has witnessed tremendous development recently. Their intriguing features and potential applications attract researchers' interest and promise an auspicious future for this class of highly porous materials.

Advances in the Structural Strategies of the Self-Assembly of Photoresponsive Supramolecular Systems

Photosensitive supramolecular systems have garnered attention due to their potential to catalyze highly specific tasks through structural changes triggered by a light stimulus. The tunability of their chemical structure and charge transfer properties provides opportunities for designing and developing smart materials for multidisciplinary applications. This review focuses on the approaches reported in the literature for tailoring properties of the photosensitive supramolecular systems, including MOFs, MOPs, and HOFs. We discuss relevant aspects regarding their chemical structure, action mechanisms, design principles, applications, and future perspectives.

Revisiting molecular adsorption: unconventional uptake of polymer chains from solution into sub-nanoporous media

Adsorption of polymers from the solution phase has been extensively studied to cope with many demands not only for separation technologies, but also for the development of coatings, adhesives, and biocompatible materials. Most studies hitherto focus on adsorption on flat surfaces and mesoporous adsorbents with open frameworks, plausibly because of the preconceived notion that it is unlikely for polymers to enter a pore with a diameter that is smaller than the gyration diameter of the polymer in solution; therefore, sub-nanoporous materials are rarely considered as a polymer adsorption medium. Here we report that polyethylene glycols (PEGs) are adsorbed into sub-nanometer one-dimensional (1D) pores of metal-organic frameworks (MOFs) from various solvents. Isothermal adsorption experiments reveal a unique solvent dependence, which is explained by the balance between polymer solvation propensity for each solvent and enthalpic contributions that compensate for potential entropic losses from uncoiling upon pore admission. In addition, adsorption kinetics identify a peculiar molecular weight (MW) dependence. While short PEGs are adsorbed faster than long ones in single-component adsorption experiments, the opposite trend was observed in double-component competitive experiments. A two-step insertion process consisting of (1) an enthalpy-driven recognition step followed by (2) diffusion regulated infiltration in the restricted 1D channels explains the intriguing selectivity of polymer uptake. Furthermore, liquid chromatography using the MOFs as the stationary phase resulted in significant PEG retention that depends on the MW and temperature. This study provides further insights into the mechanism and thermodynamics behind the present polymer adsorption system, rendering it as a promising method for polymer analysis and separation.

Metal-Organic Frameworks as Versatile Media for Polymer Adsorption and Separation

Molecular recognition is of paramount importance for modern chemical processes and has now been achieved for small molecules using well-established host-guest chemistry and adsorption-science principles. In contrast, technologies for recognizing polymer structure are relatively undeveloped. Conventional polymer separation methods, which are mostly limited in practice to size-exclusion chromatography and reprecipitation, find it difficult to recognize minute structural differences in polymer structures as such small structural alterations barely influence the polymer characteristics, including molecular size, polarity, and solubility. Therefore, most of the polymeric products being used today contain mixtures of polymers with different structures as it is challenging to completely control polymer structures during synthesis even with state-of-the-art substitution and polymerization techniques. In this context, development of novel techniques that can resolve the challenges of polymer recognition and separation is in great demand, as these techniques hold the promise of a new paradigm in polymer synthesis, impacting not only materials chemistry but also analytical and biological chemistry.In biological systems, precise recognition and translation of base monomer sequences of mRNA are achieved by threading them through small ribosome tunnels. This principle of introducing polymers into nanosized channels can possibly help us design powerful polymer recognition and separation technologies using metal-organic frameworks (MOFs) as ideal and highly designable recognition media. MOFs are porous materials comprising organic ligands and metal ions and have been extensively studied as porous beds for gas separation and storage. Recently, we found that MOFs can accommodate large polymeric chains in their nanopores. Polymer chains can spontaneously infiltrate MOFs from neat molten and solution phases by threading their terminals into MOF nanochannels. Polymer structures can be recognized and differentiated due to such insertion processes, resulting in the selective adsorption of polymers on MOFs. This enables the precise recognition of the polymer terminus structure, resulting in the perfect separation of a variety of terminal-functionalized polymers that are otherwise difficult to separate by conventional polymer separation methods. Furthermore, the MOFs can recognize polymer shapes, thus enabling the large-scale separation of high purity cyclic polymers from the complex crude mixtures of linear polymers, which are used as precursor materials in common cyclization reactions. In solution-phase adsorption, many factors, including molecular weight, terminal groups, polymer shape, polymer-MOF interaction, and coexisting solvent molecules, influence the selective adsorption behavior; this yields a new liquid chromatography-based polymer separation technology using an MOF as the stationary phase. MOF-packed columns, in which a novel separation mode based on polymer insertion into the MOF operates under a dynamic insertion/rejection equilibrium at the liquid/solid interface, exhibited excellent polymer separation capability. The polymer recognition principle described in this study thus has a high probability for realizing previously unfeasible polymer separations based on monomer composition and sequences, stereoregularity, regioregularity, helicity, and block sequences in synthetic polymers and biomacromolecules.

Progress in Multifunctional Metal-Organic Frameworks/Polymer Hybrid Membranes

The fabrication of state-of-the-art membranes with customized functions and high efficiency is of great significance, but presents challenges. Emerging metal-organic frameworks (MOFs)/polymer hybrid membranes have provided bright promise as an innovative platform to target multifunctional hybrid materials and devices; this is thanks to their unique properties, which come from three components that are collaboratively enforced. This minireview provides a brief overview of recent progress in the construction of such hybrid membranes, and highlights some of their very important applications in separation, conduction, and sensing.

Factors Affecting Hydrogen Adsorption in Metal-Organic Frameworks: A Short Review

Metal–organic frameworks (MOFs) have significant potential for hydrogen storage. The main benefit of MOFs is their reversible and high-rate hydrogen adsorption process, whereas their biggest disadvantage is related to their operation at very low temperatures. In this study, we describe selected examples of MOF structures studied for hydrogen adsorption and different factors affecting hydrogen adsorption in MOFs. Approaches to improving hydrogen uptake are reviewed, including surface area and pore volume, in addition to the value of isosteric enthalpy of hydrogen adsorption. Nanoconfinement of metal hydrides inside MOFs is proposed as a new approach to hydrogen storage. Conclusions regarding MOFs with incorporated metal nanoparticles, which may be used as nanoscaffolds and/or H₂ sorbents, are summarized as prospects for the near future.

Metal-Organic Frameworks for Practical Separation of Cyclic and Linear Polymers

The purification step in the manufacturing of cyclic polymers is difficult as complete fractionation to eliminate linear impurities requires considerable effort. Here, we report a new polymer separation methodology that uses metal-organic frameworks (MOFs) to discriminate between linear and cyclic polyethylene glycols (PEGs) via selective polymer insertion into the MOF nanopores. Preparation of a MOF-packed column allowed analytical and preparative chromatographic separation of these topologically distinct pairs. In addition, gram-scale PEGs with only cyclic structures were successfully obtained from a crude reaction mixture by using MOF as an adsorbent.

Isoreticular chemistry of scandium analogues of the multicomponent metal–organic framework MIL-142

MIL-142(Sc) is prepared and the limits of the isoreticular substitution of each linker type are explored and characterised by single-crystal XRD.

Synthesis, structure, and fluorescence properties of coordination polymers of 3,5-bis(1′,2′,4′-triazol-1′-yl) pyridine

Four coordination polymers based on 3,5-bis(1′,2′,4′-triazol-1′-yl) pyridine were synthesized. Compounds [Cd₃(btc)₂(btap)(H₂O)₆] and [Cd(oa)(btap)] exhibited high sensitivity luminescence response towards Fe³⁺, Ce³⁺, Cr₂O₇²⁻ and MnO₄⁻ in aqueous solution.

MOFs for the treatment of arsenic, fluoride and iron contaminated drinking water: A review

Over the last few decades, the global pollution of surface and groundwater poses a serious threat not only to human beings but also towards aquatic lives due to the presence of emerging contaminants. Among the others, the presence of arsenic, fluoride, and iron are considered as the most common toxic pollutants in water bodies. The emergence of metal organic frameworks (MOFs) with high porosity and surface area is represented as significant inclusion into the era of entrapping contaminants present in drinking water. In the present review article, an in-depth insight is provided on the recent developments in the removal of arsenic, fluoride, and iron from drinking water using MOFs. Various aspects related to the synthesis, latest technologies adopted for the modifications in the synthesis process and advanced applications of MOFs for the removal of such contaminants are explicitly discussed. A detailed insight was provided to understand the mechanism of various interactions of MOFs with arsenic and fluoride. With respect to arsenic, fluoride, and iron removal the ultrastructural morphology of MOFs is assessed based on different molecular arrangements. Further, commercial aspects of various MOFs are presented in order to highlight the process feasibility. Finally, various perspectives and challenges involved in process scale up are comprehensively narrated with an aspiration of futuristic developments. The paper will be beneficial to the readers for acquiring a piece of in-depth knowledge on MOFs and its various synthesis approaches along with remarkable achievements for the removal of arsenic, fluoride, and iron from contaminated drinking water.

The synthesis and applications of chiral pyrrolidine functionalized metal–organic frameworks and covalent-organic frameworks

Proline based ligands show versatile functionality to construct chiral MOFs and COFs; meanwhile, the resulted frameworks are potential materials for enantioselective adsorption and asymmetric catalysis.

Metal-Bonded Redox-Active Triarylamines and Their Interactions: Synthesis, Structure, and Redox Properties of Paddle-Wheel Copper Complexes

Four new triphenylamine ligands with different substituents in the para position and their corresponding copper(II) complexes are reported. This study includes their structural, spectroscopic, magnetic, and electrochemical properties. The complexes possess a dinuclear copper(II) paddle-wheel core, a building unit that is also common in metal-organic frameworks. Electrochemical measurements demonstrate that the triphenylamine ligands and the corresponding complexes are susceptible to oxidation, resulting in the formation of stable radical cations. The square-wave voltammograms observed for the complexes are similar to those of the ligands, except for a slight shift in potential. Square-wave voltammetry data show that, in the complexes, these oxidations can be described as individual one-electron processes centered on the coordinated ligands. Spectroelectrochemistry reveals that, during the oxidation of the complexes, no difference can be detected for the spectra of successively oxidized species. For the absorption bands of the oxidized species of the ligands and complexes, only a slight shift is observed. ESR spectra for the chemically oxidized complexes indicate ligand-centered radicals. The copper ions of the paddle-wheel core are strongly antiferromagnetic coupled. DFT calculations for the fully oxidized complexes indicate a very weak ferromagnetic coupling between the copper ions and the ligand radicals, whereas a very weak antiferromagnetic coupling is found among the ligand radicals.

Enabling Homochirality and Hydrothermal Stability in Zn4O-Based Porous Crystals

The [Zn₄O]⁶⁺ cluster is well-known to form the archetypal MOF-5 topology with dicarboxylate ligands. Here we report two new materials (CPM-300 and -301) that show dramatic alteration of topological and chemical behaviors of [Zn₄O]⁶⁺ clusters. In CPM-300, [Zn₄O]⁶⁺ untypically forms the MIL-88/MOF-235 type framework with a small pentane-ring-based chiral dicarboxylate. In contrast, in CPM-301, when mediated by [Zn₉(btz)₁₂]⁶⁺ clusters (btz = benzotriazolate), the MOF-5 topology is regenerated with the same chiral ligand, albeit with alternating [Zn₄O]⁶⁺ and [Zn₉(btz)₁₂]⁶⁺ clusters. Importantly, both CPM-300 and CPM-301 are homochiral, hydrothermally stable in boiling water and alcohol, and thermally stable to 440 °C or higher. It is concluded that small methyl groups on the chiral ligand is sufficiently powerful to shield [Zn₄O]⁶⁺ clusters from degradation by water, even at high temperatures. These results reveal a promising platform for the development of a new class of cluster-based homochiral and hydrothermally stable porous materials.

Selective sorting of polymers with different terminal groups using metal-organic frameworks

Separation of high-molecular-weight polymers differing just by one monomeric unit remains a challenging task. Here, we describe a protocol using metal-organic frameworks (MOFs) for the efficient separation and purification of mixtures of polymers that differ only by their terminal groups. In this process, polymer chains are inserted by threading one of their extremities through a series of MOF nanowindows. Selected termini can be adjusted by tuning the MOF structure, and the insertion methodology. Accordingly, MOFs with permanently opened pores allow for the complete separation of poly(ethylene glycol) (PEG) based on steric hindrance of the terminal groups. Excellent separation is achieved, even for high molecular weights (20 kDa). Furthermore, the dynamic character of a flexible MOF is used to separate PEG mixtures with very similar terminal moieties, such as OH, OMe, and OEt, as the slight difference of polarity in these groups significantly changes the pore opening kinetics.

The separation of high molecular weight polymers composed of the same number of monomeric units remains highly challenging. Here, the authors show that efficient separation and purification of mixtures of polymers that differ only by their terminal groups can be achieved through polymer threading in metal-organic framework channels.

Mesoporous Metal-Organic Frameworks: Synthetic Strategies and Emerging Applications

Metal-organic frameworks (MOFs) have attracted much attention over the past two decades due to their highly promising applications not only in the fields of gas storage, separation, catalysis, drug delivery, and sensors, but also in relatively new fields such as electric, magnetic, and optical materials resulting from their extremely high surface areas, open channels and large pore cavities compared with traditional porous materials like carbon and inorganic zeolites. Particularly, MOFs involving pores within the mesoscopic scale possess unique textural properties, leading to a series of research in the design and applications of mesoporous MOFs. Unlike previous Reviews, apart from focusing on recent advances in the synthetic routes, unique characteristics and applications of mesoporous MOFs, this Review also mentions the derivatives, composites, and hierarchical MOF-based systems that contain mesoporosity, and technical boundaries and challenges brought by the drawbacks of mesoporosity. Moreover, this Review subsequently reveals promising perspectives of how recently discovered approaches to different morphologies of MOFs (not necessarily entirely mesoporous) and their corresponding performances can be extended to minimize the shortcomings of mesoporosity, thus providing a wider and brighter scope of future research into mesoporous MOFs, but not just limited to the finite progress in the target substances alone.

Hybridization of MOFs and polymers

Metal-organic frameworks (MOFs) have received much attention because of their attractive properties. They show great potential applications in many fields. An emerging trend in MOF research is hybridization with flexible materials, which is the subject of this review. Polymers possess a variety of unique attributes, such as softness, thermal and chemical stability, and optoelectrical properties that can be integrated with MOFs to make hybrids with sophisticated architectures. Hybridization of MOFs and polymers is producing new and versatile materials that exhibit peculiar properties hard to realize with the individual components. This review article focuses on the methodology for hybridization of MOFs and polymers, as well as the intriguing functions of hybrid materials.

Solvent-dependent selective cation exchange in anionic frameworks based on cobalt(ii) and triphenylamine linkers: reactor-dependent synthesis and sorption properties

Two anionic cobalt(ii) MOFs were obtained dependent on the reactor design and show a solvent-dependent cation exchange leading to a remarkable increase in the surface area of post-synthetic modified materials.

Chiral binary metal–organic frameworks for asymmetric sequential reactions

Two chiral MOFs with precise spatial arrangements of different metallosalen active sites are efficient heterogeneous catalysts for asymmetric sequential reactions.

The construction, structures, and functions of pillared layer metal–organic frameworks

Pillared layer metal–organic frameworks (PL-MOFs), belonging to one representative of porous materials, have witnessed major advances in the past few years.

A unique 3D metal-organic framework based on a 12-connected pentanuclear Cd(II) cluster exhibiting proton conduction

Solvothermal reaction of a TCA (TCA = 4,4',4''-tricarboxytriphenylamine) ligand with Cd(NO3)2 yielded a unique 3D 12-connected metal-organic framework of , which can be simplified as a (3,3,12)-connected 3-nodal net with a Schläfli symbol of {4(16)·6(36)·8(14)}{4(2)·6}2{4(3)}2 based on a 12-connected node of a pentanuclear Cd(ii) cluster and a three-connected organic linker of TCA. Compound exhibits both photoluminescence and proton conductivity. The luminescence properties of originate from the triphenylamine chromophore of the TCA ligand. The proton conductivity of is supposed to be relevant to the structure attributes of . On the one hand, the curved narrow channels lined with a hydrophilic pentanuclear Cd(ii) cluster in can improve the water affinity of framework and facilitate the water absorption under humid conditions. On the other hand, the coordinated water molecules within the pentanuclear Cd(ii) cluster can produce a mobile H(+) proton due to coordination activation. At 80 °C and 85% RH (relative humidity), compound shows the proton conductivity of 1.45 × 10(-6) S cm(-1).