Chemically programmed cell adhesion with membrane-anchored oligonucleotides

Highly parallel production of designer organoids by mosaic patterning of progenitors

Organoids derived from human stem cells are a promising approach for disease modeling, regenerative medicine, and fundamental research. However, organoid variability and limited control over morphological outcomes remain as challenges. One open question is the extent to which engineering control over culture conditions can guide organoids to specific compositions. Here, we extend a DNA "velcro" cell patterning approach, precisely controlling the number and ratio of human induced pluripotent stem cell-derived progenitors contributing to nephron progenitor (NP) organoids and mosaic NP/ureteric bud (UB) tip cell organoids within arrays of microwells. We demonstrate long-term control over organoid size and morphology, decoupled from geometric constraints. We then show emergent trends in organoid tissue proportions that depend on initial progenitor cell composition. These include higher nephron and stromal cell representation in mosaic NP/UB organoids vs. NP-only organoids and a "goldilocks" initial cell ratio in mosaic organoids that optimizes the formation of proximal tubule structures.

Reversible Photoregulation of Cell-Cell Adhesions With Opto-E-cadherin

The cell-cell adhesion molecule E-cadherin has been intensively studied due to its prevalence in tissue function and its spatiotemporal regulation during epithelial-to-mesenchymal cell transition. Nonetheless, regulating and studying the dynamics of it has proven challenging. We developed a photoswitchable version of E-cadherin, named opto-E-cadherin, which can be toggled OFF with blue light illumination and back ON in the dark. Herein, we describe easy-to-use methods to test and characterise opto-E- cadherin cell clones for downstream experiments. Key features • This protocol describes how to implement optogenetic cell-cell adhesion molecules effectively (described here on the basis of opto-E-cadherin), while highlighting possible pitfalls. • Utilises equipment commonly found in most laboratories with high ease of use. • Phenotype screening is easy and done within a few hours (comparison of cell clusters in the dark vs. blue light in an aggregation assay). • Three different functionality assay systems are described. • After the cell line is established, all experiments can be performed within three days.

DNA nanostructures for exploring cell-cell communication

The process of coordinating between the same or multiple types of cells to jointly execute various instructions in a controlled and carefully regulated environment is a very appealing field. In order to provide clearer insight into the role of cell-cell interactions and the cellular communication of this process in their local communities, several interdisciplinary approaches have been employed to enhance the core understanding of this phenomenon. DNA nanostructures have emerged in recent years as one of the most promising tools in exploring cell-cell communication and interactions due to their programmability and addressability. Herein, this review is dedicated to offering a new perspective on using DNA nanostructures to explore the progress of cell-cell communication. After briefly outlining the anchoring strategy of DNA nanostructures on cell membranes and the subsequent dynamic regulation of DNA nanostructures, this paper highlights the significant contribution of DNA nanostructures in monitoring cell-cell communication and regulating its interactions. Finally, we provide a quick overview of the current challenges and potential directions for the application of DNA nanostructures in cellular communication and interactions.

Progress and limitations in engineering cellular adhesion for research and therapeutics

Intercellular interactions form the cornerstone of multicellular biology. Despite advances in protein engineering, researchers artificially directing physical cell interactions still rely on endogenous cell adhesion molecules (CAMs) alongside off-target interactions and unintended signaling. Recently, methods for directing cellular interactions have been developed utilizing programmable domains such as coiled coils (CCs), nanobody-antigen, and single-stranded DNA (ssDNA). We first discuss desirable molecular- and systems-level properties in engineered CAMs, using the helixCAM platform as a benchmark. Next, we propose applications for engineered CAMs in immunology, developmental biology, tissue engineering, and neuroscience. Biologists in various fields can readily adapt current engineered CAMs to establish control over cell interactions, and their utilization in basic and translational research will incentivize further expansion in engineered CAM capabilities.

High-Throughput Assembly of Compositionally Controlled 3D Cell Communities for Developmental Engineering

Cell patterning for 3D culture has increased our understanding of how cells interact among themselves and with their environment during tissue morphogenesis. Building cell communities from the bottom up with size and compositional control is invaluable for studies of morphological transitions. Here, we detail Photolithographic DNA-programmed Assembly of Cells (pDPAC). pDPAC uses a photoactive polyacrylamide gel substrate to capture single-stranded DNA on a 2D surface in large-scale, highly resolved patterns using the photomask technology. Cells are then functionalized with a complementary DNA strand, enabling cells to be temporarily adhered to distinct locations only where their complementary strand is patterned. These temporary 2D patterns can be transferred to extracellular matrix hydrogels for 3D culture of cells in biomimetic microenvironments. Use of a polyacrylamide substrate has advantages, including a simpler photolithography workflow, lower non-specific cell adhesion, and lower stiction to ECM hydrogels during release of patterned hydrogels. The protocol is equally applicable to large (cm)-scale patterns and repetitive arrays of smaller-scale cell interaction or migration experiments.

Analysis of Phase Heterogeneity in Lipid Membranes Using Single-Molecule Tracking in Live Cells

In live cells, the plasma membrane is composed of lipid domains separated by hundreds of nanometers in dynamic equilibrium. Lipid phase separation regulates the trafficking and spatiotemporal organization of membrane molecules that promote signal transduction. However, visualizing domains with adequate spatiotemporal accuracy remains challenging because of their subdiffraction limit size and highly dynamic properties. Here, we present a single lipid-molecular motion analysis pipeline (lipid-MAP) for analyzing the phase heterogeneity of lipid membranes by detecting the instantaneous velocity change of a single lipid molecule using the excellent optical properties of nanoparticles, high spatial localization accuracy of single-molecule localization microscopy, and separation capability of the diffusion state of the hidden Markov model algorithm. Using lipid-MAP, individual lipid molecules were found to be in dynamic equilibrium between two statistically distinguishable phases, leading to the formation of small (∼170 nm), viscous (2.5× more viscous than surrounding areas), and transient domains in live cells. Moreover, our findings provide an understanding of how membrane compositional changes, i.e., cholesterol and phospholipids, affect domain formation. This imaging method can contribute to an improved understanding of spatiotemporal-controlled membrane dynamics at the molecular level.

Fork- and Comb-like Lipophilic Structures: Different Chemical Approaches to the Synthesis of Oligonucleotides with Multiple Dodecyl Residues

Lipophilic oligonucleotide conjugates represent a powerful tool for nucleic acid cellular delivery, and many methods for their synthesis have been developed over the past few decades. In the present study, a number of chemical approaches for the synthesis of different fork- and comb-like dodecyl-containing oligonucleotide structures were performed, including use of non-nucleotide units and different types of phosphate modifications such as alkyl phosphoramidate, phosphoryl guanidine, and triazinyl phosphoramidate. The influence of the number of introduced lipophilic residues, their mutual arrangement, and the type of formed modification backbone on cell penetration was evaluated. The results obtained indicate great potential in the developed chemical approaches, not only for the synthesis of complex oligonucleotide structures but also for the fine-tuning of their properties.

Nucleic acid amphiphiles: Synthesis, properties, and applications

Nucleic acid amphiphiles, referring to nucleic acids modified with large hydrophobic groups, have been widely used in programmable bioengineering. Since nucleic acids are intrinsically hydrophilic, the hydrophobic groups endow nucleic acid amphiphiles with unique properties, such as self-assembling, interactions with artificial or biological membranes, and transmembrane transport. Importantly, the hybridization or target binding capability of oligonucleotide itself supplies nucleic acid amphiphiles with excellent programmability. As a result, this type of molecule has attracted considerable attention in academic studies and has enormous potential for further applications. For a comprehensive understanding of nucleic acid amphiphiles, we review the reported research on nucleic acid amphiphiles from their molecular design to final applications, in which we summarize the synthetic strategies for nucleic acid amphiphiles and draw much attention to their unique properties in different contexts. Finally, a summary of the applications of nucleic acid amphiphiles in drug development, bioengineering, and bioanalysis are critically discussed.

Polymeric biomaterial-inspired cell surface modulation for the development of novel anticancer therapeutics

Immune cell-based therapies are a rapidly emerging class of new medicines that directly treat and prevent targeted cancer. However multiple biological barriers impede the activity of live immune cells, and therefore necessitate the use of surface-modified immune cells for cancer prevention. Synthetic and/or natural biomaterials represent the leading approach for immune cell surface modulation. Different types of biomaterials can be applied to cell surface membranes through hydrophobic insertion, layer-by-layer attachment, and covalent conjugations to acquire surface modification in mammalian cells. These biomaterials generate reciprocity to enable cell-cell interactions. In this review, we highlight the different biomaterials (lipidic and polymeric)-based advanced applications for cell-surface modulation, a few cell recognition moieties, and how their interplay in cell-cell interaction. We discuss the cancer-killing efficacy of NK cells, followed by their surface engineering for cancer treatment. Ultimately, this review connects biomaterials and biologically active NK cells that play key roles in cancer immunotherapy applications.

Preparation and Biological Properties of Oligonucleotide-Functionalized Virus-like Particles

Oligonucleotides are powerful molecules for programming function and assembly. When arrayed on nanoparticle scaffolds in high density, the resulting molecules, spherical nucleic acids (SNAs), become imbued with unique properties. We used the copper-catalyzed azide-alkyne cycloaddition to graft oligonucleotides on Qβ virus-like particles to see if such structures also gain SNA-like behavior. Copper-binding ligands were shown to promote the click reaction without degrading oligonucleotide substrates. Reactions were first optimized with a small-molecule fluorogenic reporter and were then applied to the more challenging synthesis of polyvalent protein nanoparticle-oligonucleotide conjugates. The resulting particles exhibited the enhanced cellular uptake and protection from nuclease-mediated oligonucleotide cleavage characteristic of SNAs, had similar residence time in the liver relative to unmodified particles, and were somewhat shielded from immune recognition, resulting in nearly 10-fold lower antibody titers relative to unmodified particles. Oligonucleotide-functionalized virus-like particles thus provide an interesting option for protein nanoparticle-mediated delivery of functional molecules.

Orientation-controlled membrane anchoring of bioorthogonal catalysts on live cells via liposome fusion-based transport

An obstacle to conducting diverse bioorthogonal reactions in living systems is the sensitivity of artificial metal catalysts. It has been reported that artificial metallocatalysts can be assembled in "cleaner" environments in cells for stabilized performance, which is powerful but is limited by the prerequisite of using specific cells. We report here a strategy to establish membrane-anchored catalysts with precise spatial control via liposome fusion-based transport (MAC-LiFT), loading bioorthogonal catalytic complexes onto either or both sides of the membrane leaflets. We show that the inner face of the cytoplasmic membrane serves as a reliable shelter for metal centers, protecting the complexes from deactivation thus substantially lowering the amount of catalyst needed for effective intracellular catalysis. This MAC-LiFT approach makes it possible to establish catalyst-protective systems with exclusively exogenous agents in a wide array of mammalian cells, allowing convenient and wider use of diverse bioorthogonal reactions in live cellular systems.

Lipid-linked nucleoside triphosphates for enzymatic synthesis of hydrophobic oligonucleotides with enhanced membrane anchoring efficiency

We designed and synthesized a series of 2'-deoxyribonucleoside triphosphates (dNTPs) bearing various lipid moieties. Fatty acid- and cholesterol-modified dNTPs proved to be substrates for KOD XL DNA polymerase in primer extension reactions. They were also mutually compatible for simultaneous multiple incorporations into the DNA strand. The methodology of enzymatic synthesis opened a pathway to diverse structurally unique lipid-ON probes containing one or more lipid units. We studied interactions of such probes with the plasma membranes of live cells. Employing a rational design, we found a series of lipid-ONs with enhanced membrane anchoring efficiency. The in-membrane stability of multiply modified ONs was superior to that of commonly studied ON analogues, in which a single cholesterol molecule is typically tethered to the thread end. Notably, some of the probes were detected at the cell surface even after 24 h upon removal of the probe solution. Such an effect was general to several studied cell lines.

Recent Advances in DNA Origami-Engineered Nanomaterials and Applications

DNA nanotechnology is a unique field, where physics, chemistry, biology, mathematics, engineering, and materials science can elegantly converge. Since the original proposal of Nadrian Seeman, significant advances have been achieved in the past four decades. During this glory time, the DNA origami technique developed by Paul Rothemund further pushed the field forward with a vigorous momentum, fostering a plethora of concepts, models, methodologies, and applications that were not thought of before. This review focuses on the recent progress in DNA origami-engineered nanomaterials in the past five years, outlining the exciting achievements as well as the unexplored research avenues. We believe that the spirit and assets that Seeman left for scientists will continue to bring interdisciplinary innovations and useful applications to this field in the next decade.

Sequential Control of Cellular Interactions Using Dynamic DNA Displacement

Intercellular interactions play a significant role in various complex biological processes, and their dysregulation promotes disease progression. To reveal the mechanisms of intercellular interactions without destroying basic life processes, it is necessary to mimic multicellular behaviors in vitro. However, the precise control of multicellular systems remains technically challenging owing to dynamic interactions. Here, we used DNA as a molecular lock and key to sequentially assemble and disassemble different cell clusters in a programmed way, regulating intercellular interactions. Tagging the surface of live cells with cholesterol-modified DNA enabled dynamical intercellular assemblies. By consecutively adding corresponding metaphorical locks (attaching DNA strands) and keys (detaching DNA strands), clusters of different cells could be sequentially formed. This strategy improved the capability of natural killer NK-92 cells to target tumor cells, improving the antitumor therapy efficacy. Our suggested approach allows dynamic regulation of intercellular interactions in complex cell systems and increases understanding of intercellular communication networks.

Selective Positioning of Different Cell Types on 3D Scaffolds via DNA Hybridization

Three-dimensional (3D) microscaffolds for cell biology have shown their potential in mimicking physiological environments and simulating complex multicellular constructs. However, controlling the localization of cells precisely on microfabricated structures is still complex and usually limited to two-dimensional assays. Indeed, the implementation of an efficient method to selectively target different cell types to specific regions of a 3D microscaffold would represent a decisive step toward cell-by-cell assembly of complex cellular arrangements. Here, we use two-photon lithography (2PL) to fabricate 3D microarchitectures with functional photoresists. UV-mediated click reactions are used to functionalize their surfaces with single-stranded DNA oligonucleotides, using sequential repetition to decorate different scaffold regions with individual DNA addresses. Various immortalized cell lines and stem cells modified by grafting complementary oligonucleotides onto the phospholipid membranes can then be immobilized onto complementary regions of the 3D structures by selective hybridization. This allows controlled cocultures to be established with spatially separated arrays of eukaryotic cells in 3D.

DNA-Templated Anchoring of Proteins for Programmable Cell Functionalization and Immunological Response

Membrane protein engineering exhibits great potential for cell functionalization. Although genetic strategies are sophisticated for membrane protein engineering, there still exist some issues, including transgene insertional mutagenesis, laborious, complicated procedures, and low tunability. Herein, we report a DNA-templated anchoring of exogenous proteins on living cell membranes to realize programmable functionalization of living cells. Using DNA as a scaffold, the model cell membranes are readily modified with proteins, on which the density and ratio of proteins as well as their interactions can be precisely controlled through predictable DNA hybridization. Then, the natural killer (NK) cells were engineered to gain the ability to eliminate the immune checkpoint signaling at the NK-tumor synapse, which remarkably promoted NK cell activation in immunotherapy. Given the versatile functions of exogenous proteins and flexible designs of programmable DNA, this method has the potential to facilitate membrane-protein-based cell engineering and therapy.

DNA Nanotechnology-Empowered Live Cell Measurements

The systematic analysis and precise manipulation of a variety of biomolecules should lead to unprecedented findings in fundamental biology. However, conventional technology cannot meet the current requirements. Despite this, there has been progress as DNA nanotechnology has evolved to generate DNA nanostructures and circuits over the past four decades. Many potential applications of DNA nanotechnology for live cell measurements have begun to emerge owing to the biocompatibility, nanometer addressability, and stimulus responsiveness of DNA. In this review, the DNA nanotechnology-empowered live cell measurements which are currently available are summarized. The stability of the DNA nanostructures, in a cellular microenvironment, which is crucial for accomplishing precise live cell measurements, is first summarized. Thereafter, measurements in the extracellular and intracellular microenvironment, in live cells, are introduced. Finally, the challenges that are innate to, and the further developments that are possible in this nascent field are discussed.

A reductionist approach to determine the effect of cell-cell contact on human epidermal stem cell differentiation

The balance between stem cell renewal and differentiation is determined by the interplay between intrinsic cellular controls and extrinsic factors presented by the microenvironment, or 'niche'. Previous studies on cultured human epidermis have utilised suspension culture and restricted cell spreading to investigate regulation of differentiation in single keratinocytes. However, keratinocytes are typically adherent to neighbouring cells in vivo. We therefore developed experimental models to investigate the combined effects of cell-ECM adhesion and cell-cell contact. We utilized lipid-modified oligonucleotides to form clusters of keratinocytes which were subsequently placed in suspension to induce terminal differentiation. In this experimental model cell-cell contact had no effect on suspension-induced differentiation of keratinocytes. We next developed a high-throughput platform for robust geometrical confinement of keratinocytes to hexagonal ECM-coated islands permitting direct cell-cell contact between single cells. As in the case of circular islands, differentiation was stimulated on the smallest single hexagonal islands. However, the percentage of involucrin-positive cells on small bowtie islands was significantly lower than on single islands, demonstrating that cell-cell contact reduced differentiation in response to decreased substrate adhesion. None of the small bowtie islands contained two involucrin-positive cells. Rather, if one cell was involucrin-positive the other was involucrin-negative. This suggests that there is intrinsic asymmetry in the effect of cell-cell contact in decreasing differentiation. Thus, our reductionist approaches provide new insights into the effect of the niche on keratinocyte differentiation. STATEMENT OF SIGNIFICANCE: Stem cell behaviour is regulated by a combination of external signals, including the nature of the adhesive substrate and cell-cell interactions. An understanding of how different signals are integrated creates the possibility of developing new biomaterials to promote tissue regeneration and broaden our understanding of skin diseases such as eczema and psoriasis, in which stem cell proliferation and differentiation are perturbed. In this study we have applied two methods to engineer intercellular adhesion of human epidermal stem cells, one involving lipid-modified DNA and the other involving hexagonal micropatterns. We show that the effect of cell-cell adhesion depends on cell-substrate adhesion and uncover evidence that two cells in equivalent environments can nevertheless behave differently.

Detecting Intact Virus Using Exogenous Oligonucleotide Labels

The COVID-19 pandemic has revealed how an emerging pathogen can cause a sudden and dramatic increase in demand for viral testing. Testing pooled samples could meet this demand; however, the sensitivity of reverse transcription quantitative polymerase chain reaction (RT-qPCR), the gold standard, significantly decreases with an increasing number of samples pooled. Here, we introduce detection of intact virus by exogenous-nucleotide reaction (DIVER), a method that quantifies intact virus and is robust to sample dilution. As demonstrated using two models of severe acute respiratory syndrome coronavirus 2, DIVER first tags membraned particles with exogenous oligonucleotides, then captures the tagged particles on beads functionalized with a virus-specific capture agent (in this instance, angiotensin-converting enzyme 2), and finally quantifies the oligonucleotide tags using qPCR. Using spike-presenting liposomes and spike-pseudotyped lentivirus, we show that DIVER can detect 1 × 10⁵ liposomes and 100 plaque-forming units of lentivirus and can successfully identify positive samples in pooling experiments. Overall, DIVER is well positioned for efficient sample pooling and clinical validation.

Bidirectional Supramolecular Display and Signal Amplification on the Surface of Living Cells

The ability to display exogenous molecules or nanomaterials on the surface of cells holds great potential for biomedical applications such as cell imaging and delivery. Numerous methods have been well established to enhance the display of biomolecules and nanomaterials on the cell surface. However, it is challenging to remove these biomolecules or nanomaterials from the cell surface. The purpose of this study was to investigate the reversible display of supramolecular nanomaterials on the surface of living cells. The data show that DNA initiators could induce the self-assembly of DNA-alginate conjugates to form supramolecular nanomaterials and amplify the fluorescence signals on the cell surface. Complementary DNA (cDNA), DNase, and alginase could all trigger the reversal of the signals from the cell surface. However, these three molecules exhibited different triggering efficiencies in the order cDNA > alginase > DNase. The combination of cDNA and alginase led to the synergistic reversal of nanomaterials and fluorescent signals from the cell surface. Thus, this study has successfully demonstrated a method for the bidirectional display of supramolecular nanomaterials on the surface of living cells. This method may find its application in numerous fields such as intact cell imaging and separation.

Colonization of biofilm in wastewater treatment: A review

The attachment and colonization process of microorganisms on a carrier is an interdisciplinary research field. Through a series of physical, chemical, and biological actions, the microorganisms can eventually reproduce on the carrier. This article introduces biofilm start-up and its applications, and explores the current issues to look forward to future development directions. Firstly, the mechanism of microbial film formation is analyzed from the microbial community colonization and reproduction process. Secondly, when analyzing the factors influencing microbial membrane formation, the effect of microbial properties (e.g., genes, proteins, lipids) and external conditions (i.e., carrier, operating environment, and regulation mechanism among microbial communities) were discussed in depth. Aimed at exploring the mechanisms and influencing factors of biofilm start-up, this article proposes the application measures to strengthen this process. Finally, the problems encountered and the future development direction of the technology are analyzed and prospected.

Deoxyribonucleic acid anchored on cell membranes for biomedical application

Engineering cellular membranes with functional molecules provides an attractive strategy to manipulate cellular behaviors and functionalities. Currently, synthetic deoxyribonucleic acid (DNA) has emerged as a promising molecular tool to engineer cellular membranes for biomedical applications due to its molecular recognition and programmable properties. In this review, we summarized the recent advances in anchoring DNA on the cellular membranes and their applications. The strategies for anchoring DNA on cell membranes were summarized. Then their applications, such as immune response activation, receptor oligomerization regulation, membrane structure mimicking, cell-surface biosensing, and construction of cell clusters, were listed. The DNA-enabled intelligent systems which were able to sense stimuli such as DNA strands, light, and metal ions were highlighted. Finally, insights regarding the remaining challenges and possible future directions were provided.

A Biomimetic Approach for Spatially Controlled Cell Membrane Engineering Using Fusogenic Spherical Nucleic Acid

Engineering of the cell plasma membrane using functional DNA is important for studying and controlling cellular behaviors. However, most efforts to apply artificial DNA interactions on cells are limited to external membrane surface due to the lack of suitable synthetic tools to engineer the intracellular side, which impedes many applications in cell biology. Inspired by the natural extracellular vesicle-cell fusion process, we have developed a fusogenic spherical nucleic acid construct to realize robust DNA functionalization on both external and internal cell surfaces via liposome fusion-based transport (LiFT) strategy, which enables applications including the construction of heterotypic cell assembly for programmed signaling pathway and detection of intracellular metabolites. This approach can engineer cell membranes in a highly efficient and spatially controlled manner, allowing one to build anisotropic membrane structures with two orthogonal DNA functionalities.

Multiplexed DNA-Directed Patterning of Antibodies for Applications in Cell Subpopulation Analysis

Antibodies provide the functional biospecificity that has enabled the development of sensors, diagnostic tools, and assays in both laboratory and clinical settings. However, as multimarker screening becomes increasingly necessary due to the heterogeneity and complexity of human pathology, new methods must be developed that are capable of coordinating the precise assembly of multiple, distinct antibodies. To address this technological challenge, we engineered a bottom-up, high-throughput method in which DNA patterns, comprising unique 20-base pair oligonucleotides, are patterned onto a substrate using photolithography. These microfabricated surface patterns are programmed to hybridize with, and instruct the multiplexed assembly of, antibodies conjugated with the complementary DNA strands. We demonstrate that this simple, yet robust, approach preserves the antibody-binding functionality in two common applications: antibody-based cell capture and label-free surface marker screening. Using a simple proof-of-concept capture device, we achieved high purity separation of a breast cancer cell line, MCF-7, from a blood cell line, Jurkat, with capture purities of 77.4% and 96.6% when using antibodies specific for the respective cell types. We also show that antigen-antibody interactions slow cell trajectories in flow in the next-generation microfluidic node-pore sensing (NPS) device, enabling the differentiation of MCF-7 and Jurkat cells based on EpCAM surface-marker expression. Finally, we use a next-generation NPS device patterned with antibodies against E-cadherin, N-cadherin, and β-integrin-three markers that are associated with epithelial-mesenchymal transitions-to perform label-free surface marker screening of MCF10A, MCF-7, and Hs 578T breast epithelial cells. Our high-throughput, highly versatile technique enables rapid development of customized, antibody-based assays across a host of diverse diseases and research thrusts.

Height, but not binding epitope, affects the potency of synthetic TCR agonists

Under physiological conditions, peptide-major histocompatibility complex (pMHC) molecules can trigger T cell receptors (TCRs) as monovalent ligands that are sparsely distributed on the plasma membrane of an antigen-presenting cell. TCRs can also be triggered by artificial clustering, such as with pMHC tetramers or antibodies; however, these strategies circumvent many of the natural ligand discrimination mechanisms of the T cell and can elicit nonphysiological signaling activity. We have recently introduced a synthetic TCR agonist composed of an anti-TCRβ Fab′ antibody fragment covalently bound to a DNA oligonucleotide, which serves as a membrane anchor. This Fab′-DNA ligand efficiently triggers TCR as a monomer when membrane associated and exhibits a potency and activation profile resembling agonist pMHC. In this report, we explore the geometric requirements for efficient TCR triggering and cellular activation by Fab′-DNA ligands. We find that T cells are insensitive to the ligand binding epitope on the TCR complex but that length of the DNA tether is important. Increasing, the intermembrane distance spanned by Fab′-DNA:TCR complexes decreases TCR triggering efficiency and T cell activation potency, consistent with the kinetic-segregation model of TCR triggering. These results establish design parameters for constructing synthetic TCR agonists that are able to activate polyclonal T cell populations, such as T cells from a human patient, in a similar manner as the native pMHC ligand.

Reconstructing Soma-Soma Synapse-like Vesicular Exocytosis with DNA Origami

Cell-cell communications exhibit distinct physiological functions in immune responses and neurotransmitter signaling. Nevertheless, the ability to reconstruct a soma-soma synapse-like junction for probing intercellular communications remains difficult. In this work, we develop a DNA origami nanostructure-based method for establishing cell conjugation, which consequently facilitates the reconstruction of a soma-soma synapse-like junction. We demonstrate that intercellular communications including small molecule and membrane vesicle exchange between cells are maintained in the artificially designed synapse-like junction. By inserting the carbon fiber nanometric electrodes into the soma-soma synapse-like junction, we accomplish the real-time monitoring of individual vesicular exocytotic events and obtain the information on vesicular exocytosis kinetics via analyzing the parameters of current spikes. This strategy provides a versatile platform to study synaptic communications.

Modulation of cell membrane functionalization with aggregates of oligodeoxynucleotides containing alkyl chain-modified uridines

In this study, we prepared oligodeoxynucleotides (ODNs) containing the uridine base modified by an alkyl chain at the 5-position (AU) and characterized their aggregate formation, localization, and functions in cells. These experiments revealed that aggregates of these ODNs were readily transported into cells, but their localization was dependent upon the number of hydrophobic units. ODNs with one modified AU were transported in the cytosol, while ODNs with multiple AU modifications resulted in their accumulation at the cell membrane. We also examined the ability of the AU-modified ODNs to capture small molecules at the cell membrane and their cellular uptake. We positioned a thioflavin-T (ThT)-binding aptamer on the cell membrane by means of hybridization with ODNs with three AUs at the strand end. Treatment with ThT resulted in its efficient uptake into cells, due to the capture of the ThT by the aptamers on the cell membrane. Thus, we demonstrated the functionalization of cell membranes with modified ODNs and the efficient delivery of small molecules into the cells.

Assembly Pathway Selection with DNA Reaction Circuits for Programming Multiple Cell-Cell Interactions

The manipulation of cell-cell interactions promotes the study of multicellular behavior, but it remains a great challenge for programming multicellular assembly in complex reaction pathways with multiple cell types. Here we report a DNA reaction circuit-based approach to cell-surface engineering for the programmable regulation of multiple cell-cell interactions. The DNA circuits are designed on the basis of a stem-loop-integrated DNA hairpin motif, which has the capability of programming diverse molecular self-assembly and disassembly pathways by sequential allosteric activation. Modifying the cell surface with such DNA reaction circuits allows for performing programmable chemical functions on cell membranes and the control of multicellular self-assembly with selectivity. We demonstrate the selective control of targeting the capability of natural killer (NK) cells to two types of tumor cells, which show selectively enhanced cell-specific adaptive immunotherapy efficacy. We hope that our method provides new ideas for the programmable control of multiple cell-cell interactions in complex reaction pathways and potentially promotes the development of cell immunotherapy.

Non-genetic cell-surface modification with a self-assembling molecular glue

This report describes the development of a non-genetic cell-surface modification method, in which a self-assembling small molecule is combined with Halo-tag proteins. Cell-surface functionalization with cancer-linked extracellular proteins led to enhanced cell motility, angiogenesis, and immune shielding of the cells, paving the way for translational opportunities for cell therapy.

Synthetic DNA for Cell-Surface Engineering

The cell membrane is not only a physical barrier, but also a functional organelle that regulates the communication between a cell and its environment. The ability to functionalize the cell membrane with synthetic molecules or nanostructures would advance cellular functions beyond what evolution has provided. The aim of this Minireview is to introduce recent progress in using synthetic DNA and DNA-based nanostructures for cell-surface engineering. We first introduce chemical conjugation and physical binding methods for monovalent and polyvalent surface engineering. We then introduce the application of these methods for either the promotion or inhibition of cell-environment communication in numerous applications, including the promotion of cell-cell recognition, regulation of intracellular pathways, protection of therapeutic cells, and sensing of the intracellular and extracellular microenvironments. Lastly, we summarize current challenges existing in this area and potential solutions to solve these challenges.

Spatiotemporal Control Over Multicellular Migration Using Green Light Reversible Cell-Cell Interactions

The regulation of cell-cell adhesions in space and time plays a crucial role in cell biology, especially in the coordination of multicellular behavior. Therefore, tools that allow for the modulation of cell-cell interactions with high precision are of great interest to a better understanding of their roles and building tissue-like structures. Herein, the green light-responsive protein CarH is expressed at the plasma membrane of cells as an artificial cell adhesion receptor, so that upon addition of its cofactor vitamin B₁₂ specific cell-cell interactions form and lead to cell clustering in a concentration-dependent manner. Upon green light illumination, the CarH based cell-cell interactions disassemble and allow for their reversion with high spatiotemporal control. Moreover, these artificial cell-cell interactions impact cell migration, as observed in a wound-healing assay. When the cells interact with each other in the presence of vitamin B₁₂ in the dark, the cells form on a solid front and migrate collectively; however, under green light illumination, individual cells migrate randomly out of the monolayer. Overall, the possibility of precisely controlling cell-cell interactions and regulating multicellular behavior is a potential pathway to gaining more insight into cell-cell interactions in biological processes.

Mechanochemical Regulation of Cell Adhesion by Incorporation of Synthetic Polymers to Plasma Membranes

Chemical control of cell-cell interactions using synthetic materials is useful for a wide range of biomedical applications. Herein, we report a method to regulate cell adhesion and dispersion by introducing repulsive forces to live cell membranes. To induce repulsion, we tethered amphiphilic polymers, such as cholesterol-modified poly(ethylene glycol) (PEG-CLS), to cell membranes. We found that the repulsive forces introduced by these tethered polymers induced cell detachment from a substrate and allowed cell dispersion in a suspension, modulated the speed of cell migration, and improved the separation of cells from tissues. Our analyses showed that coating the cells with tethered polymers most likely generated two distinct repulsive forces, lateral tension and steric repulsion, on the surface, which were tuned by altering the polymer size and density. We modeled how these two forces are generated in kinetically distinctive manners to explain the various responses of cells to the coating. Collectively, our observations demonstrate mechanochemical regulation of cell adhesion and dispersion by simply adding polymers to cells without genetic manipulation or chemical synthesis in the cells, which may contribute to the optimization of chemical coating strategies to regulate various types of cell-cell interacting systems.

Nongenetic Bioconjugation Strategies for Modifying Cell Membranes and Membrane Proteins: A Review

The cell membrane possesses an extensive library of proteins, carbohydrates, and lipids that control a significant portion of inter- and intracellular functions, including signaling, proliferation, migration, and adhesion, among others. Augmenting the cell surface composition would open possibilities for advances in therapy, tissue engineering, and probing fundamental cell processes. While genetic engineering has proven effective for many in vitro applications, these techniques result in irreversible changes to cells and are difficult to apply in vivo. Another approach is to instead attach exogenous functional groups to the cell membrane without changing the genetic nature of the cell. This review focuses on more recent approaches of nongenetic methods of cell surface modification through metabolic pathways, anchorage by hydrophobic interactions, and chemical conjugation. Benefits and drawbacks of each approach are considered, followed by a discussion of potential applications for nongenetic cell surface modification and an outlook on the future of the field.

Bacterial Cell Display as a Robust and Versatile Platform for Engineering Low-Affinity Ligands and Enzymes

Directed evolution has been remarkably successful at expanding the chemical and functional boundaries of biology. That progress is heavily dependent on the robustness and flexibility of the available selection platforms, given the significant cost to (re)develop a given platform to target a new desired function. Bacterial cell display has a significant track record as a viable strategy for the engineering of mesophilic enzymes, as enzyme activity can be probed directly and free from interference from the cellular milieu, but its adoption has lagged behind other display-based methods. Herein, we report the development of SNAP as a quantitative reporter for bacterial cell display, which enables fast troubleshooting and the systematic development of the display-based selection platform, thus improving its robustness. In addition, we demonstrate that even weak interactions between displayed proteins and nucleic acids can be harnessed for the specific labelling of bacterial cells, allowing functional characterisation of DNA binding proteins and enzymes, thus making it a highly flexible platform for these biochemical functions. Together, this establishes bacterial display as a robust and flexible platform, ideally suited for the systematic engineering of ligands and enzymes needed for XNA molecular biology.

Aptamer-Directed Protein-Specific Multiple Modifications of Membrane Glycoproteins on Living Cells

Understanding how a cell membrane protein functions on living cells remains a challenge for cell biology. Specific placement of functional molecules on specific proteins in their native environment would allow comprehensive study of proteins' dynamic functions. Existing methods cannot facilely achieve multiple modifications on specific membrane proteins. In this report, we describe an aptamer-induced, protein-specific bio-orthogonal modification technology for precise nongenetic immobilization of multiple small functional molecules on target membrane glycoproteins by combining metabolic technology and aptamer targeting. In brief, DNA probes were designed by modifying aptamers, which bind to target proteins on the surfaces of living cells pretreated with N-azidoacetylmannosamine-tetraacylated (Ac₄ManNAz). The cyclooctynes tagged of DNA probes will approach the azide groups to trigger the bio-orthogonal reactions. After UV irradiation and hybridization with cDNA (complementary DNA), the aptamers can be removed, and the process can be repeated to achieve multiple modifications for multicolor imaging and cell surface nanoengineering on specific proteins.

Orthogonal Blue and Red Light Controlled Cell-Cell Adhesions Enable Sorting-out in Multicellular Structures

The self-assembly of different cell types into multicellular structures and their organization into spatiotemporally controlled patterns are both challenging and extremely powerful to understand how cells function within tissues and for bottom-up tissue engineering. Here, we not only independently control the self-assembly of two cell types into multicellular architectures with blue and red light, but also achieve their self-sorting into distinct assemblies. This required developing two cell types that form selective and homophilic cell–cell interactions either under blue or red light using photoswitchable proteins as artificial adhesion molecules. The interactions were individually triggerable with different colors of light, reversible in the dark, and provide noninvasive and temporal control over the cell–cell adhesions. In mixtures of the two cells, each cell type self-assembled independently upon orthogonal photoactivation, and cells sorted out into separate assemblies based on specific self-recognition. These self-sorted multicellular architectures provide us with a powerful tool for producing tissue-like structures from multiple cell types and investigate principles that govern them.

Patterning of Particles and Live Cells at Single Cell Resolution

The ability to manipulate and selectively position cells into patterns or distinct microenvironments is an important component of many single cell experimental methods and biological engineering applications. Although a variety of particles and cell patterning methods have been demonstrated, most of them deal with the patterning of cell populations, and are either not suitable or difficult to implement for the patterning of single cells. Here, we describe a bottom-up strategy for the micropatterning of cells and cell-sized particles. We have configured a micromanipulator system, in which a pneumatic microinjector is coupled to a holding pipette capable of physically isolating single particles and cells from different types, and positioning them with high accuracy in a predefined position, with a resolution smaller than 10 µm. Complementary DNA sequences were used to stabilize and hold the patterns together. The system is accurate, flexible, and easy-to-use, and can be automated for larger-scale tasks. Importantly, it maintains the viability of live cells. We provide quantitative measurements of the process and offer a file format for such assemblies.

In Situ Synthesis of an Aptamer-Based Polyvalent Antibody Mimic on the Cell Surface for Enhanced Interactions between Immune and Cancer Cells

An ability to promote therapeutic immune cells to recognize cancer cells is important for the success of cell-based cancer immunotherapy. We present a synthetic method for functionalizing the surface of natural killer (NK) cells with a supramolecular aptamer-based polyvalent antibody mimic (PAM). The PAM is synthesized on the cell surface through nucleic acid assembly and hybridization. The data show that PAM has superiority over its monovalent counterpart in powering NKs to bind to cancer cells, and that PAM-engineered NK cells exhibit the capability of killing cancer cells more effectively. Notably, aptamers can, in principle, be discovered against any cell receptors; moreover, the aptamers can be replaced by any other ligands when developing a PAM. Thus, this work has successfully demonstrated a technology platform for promoting interactions between immune and cancer cells.

The Importance of Cell-Cell Interaction Dynamics in Bottom-Up Tissue Engineering: Concepts of Colloidal Self-Assembly in the Fabrication of Multicellular Architectures

Building tissue from cells as the basic building block based on principles of self-assembly is a challenging and promising approach. Understanding how far principles of self-assembly and self-sorting known for colloidal particles apply to cells remains unanswered. In this study, we demonstrate that not just controlling the cell-cell interactions but also their dynamics is a crucial factor that determines the formed multicellular structure, using photoswitchable interactions between cells that are activated with blue light and reverse in the dark. Tuning dynamics of the cell-cell interactions by pulsed light activation results in multicellular architectures with different sizes and shapes. When the interactions between cells are dynamic, compact and round multicellular clusters under thermodynamic control form, while otherwise branched and loose aggregates under kinetic control assemble. These structures parallel what is known for colloidal assemblies under reaction- and diffusion-limited cluster aggregation, respectively. Similarly, dynamic interactions between cells are essential for cells to self-sort into distinct groups. Using four different cell types, which expressed two orthogonal cell-cell interaction pairs, the cells sorted into two separate assemblies. Bringing concepts of colloidal self-assembly to bottom-up tissue engineering provides a new theoretical framework and will help in the design of more predictable tissue-like structures.

Quantitative evaluation of the impact of artificial cell adhesion via DNA hybridization on E-cadherin-mediated cell adhesion

Programmable cell adhesion with DNA hybridization is a promising approach for fabricating various tissue architectures without sophisticated instrumentation. However, little is known about how this artificial interaction influences the binding of cell adhesion proteins, E-cadherin. In this work, we designed a planar and fluid lipid membrane displaying E-cadherin and/or single-strand DNA with well-defined densities. Visualization of cells on membranes by fluorescence and interference microscopy revealed cell adhesion to be a two-step process: artificial adhesion by DNA hybridization within a few minutes followed by biological adhesion via cadherin-cadherin binding within hours. Furthermore, we discovered that DNA hybridization can substantially facilitate E-cadherin-mediated cell adhesion. The promotive effect is probably due to the enforced binding between E-cadherin molecules in geometrical confinement between two membranes. Our in vitro model of cell adhesion can potentially be used to design functional synthetic molecules that can regulate cell adhesion via cell adhesion proteins for tissue engineering.

Recapitulating complex biological signaling environments using a multiplexed, DNA-patterning approach

Elucidating how the spatial organization of extrinsic signals modulates cell behavior and drives biological processes remains largely unexplored because of challenges in controlling spatial patterning of multiple microenvironmental cues in vitro. Here, we describe a high-throughput method that directs simultaneous assembly of multiple cell types and solid-phase ligands across length scales within minutes. Our method involves lithographically defining hierarchical patterns of unique DNA oligonucleotides to which complementary strands, attached to cells and ligands-of-interest, hybridize. Highlighting our method's power, we investigated how the spatial presentation of self-renewal ligand fibroblast growth factor-2 (FGF-2) and differentiation signal ephrin-B2 instruct single adult neural stem cell (NSC) fate. We found that NSCs have a strong spatial bias toward FGF-2 and identified an unexpected subpopulation exhibiting high neuronal differentiation despite spatially occupying patterned FGF-2 regions. Overall, our broadly applicable, DNA-directed approach enables mechanistic insight into how tissues encode regulatory information through the spatial presentation of heterogeneous signals.

A quantitative assessment of the dynamic modification of lipid-DNA probes on live cell membranes

Synthetic lipid-DNA probes have recently attracted much attention for cell membrane analysis, transmembrane signal transduction, and regulating intercellular networks. These lipid-DNA probes can spontaneously insert onto plasma membranes simply after incubation. The highly precise and controllable DNA interactions have further allowed the programmable manipulation of these membrane-anchored functional probes. However, we still have quite limited understanding of how these lipid-DNA probes interact with cell membranes and also what parameters determine this process. In this study, we have systematically studied the dynamic process of cell membrane modification with a group of lipid-DNA probes. Our results indicated that the hydrophobicity of the lipid-DNA probes is strongly correlated with their membrane insertion and departure rates. Most cell membrane insertion stems from the monomeric form of probes, rather than the aggregates. Lipid-DNA probes can be removed from cell membranes through either endocytosis or direct outflow into the solution. As a result, long-term probe modifications on cell membranes can be realized in the presence of excess probes in the solution and/or endocytosis inhibitors. For the first time, we have successfully improved the membrane persistence of lipid-DNA probes to more than 24 h. Our quantitative data have dramatically improved our understanding of how lipid-DNA probes dynamically interact with cell membranes. These results can be further used to allow a broad range of applications of lipid-DNA probes for cell membrane analysis and regulation.

Cell-Membrane-Anchored DNA Nanoplatform for Programming Cellular Interactions

Cell-cell interactions are mediated through compositions expressed on the membrane. Engineering the cell surface to display functional modules with high biocompatibility, high controllability, and high stability would offer great opportunities for studying and manipulating these intercellular reactions. However, it remains a technical challenge because of the complex and dynamic nature of the cell membrane. Herein, by using three-dimensional (3D) amphiphilic pyramidal DNA as the scaffold, we develop a biocompatible, effective, and versatile strategy for engineering the cell surface with DNA probes. Compared with linear DNA constructs, these pyramidal probes show higher (nearly 100-fold) membrane-anchoring stability and higher (about 2.5-fold) target accessibility. They enable specific, effective, and tunable connections between cells. Meanwhile, our results indicate that connecting cells in close proximity are critical to initiate intercellular communication. By combining high programmability and high diversity of DNA probes, this strategy is expected to provide a powerful and designable membrane-anchored nanoplatform for studying multicellular communication networks.