Electrocatalytic Hydrogen Redox Chemistry on Gold Nanoparticles

Platinum-Grafted Twenty-Five Atom Gold Nanoclusters for Robust Hydrogen Evolution

A robust hydrogen evolution is demonstrated from Au25(PET)18]- nanoclusters (PET = 2-phenylethanethiol) grafted with minimal platinum atoms. The fabrication involves an electrochemical activation of nanoclusters by partial removal of thiols, without affecting the metallic core, which exposes Au-sites adsorbed with hydrogen and enables an electroless grafting of platinum. The exposed Au-sites feature the (111)-facet of the fcc-Au25 nanoclusters as assessed through lead underpotential deposition. The electrochemically activated nanoclusters (without Pt loading) show better electrocatalytic reactivity toward hydrogen evolution reaction than the pristine nanoclusters in an acidic medium. The platinum-grafted nanocluster outperformed with a lower overpotential of 0.117 V vs RHE (RHE = Reversible Hydrogen Electrode) compared to electrochemically activated nanoclusters (0.353 V vs RHE ) at 10 mA cm-2 and is comparable with commercial Pt/C. The electrochemically activated nanoclusters show better reactivity at higher current density owing to the ease of hydrogen release from the active sites. The modified nanoclusters show unique supramolecular self-assembly characteristics as observed in electron microscopy and tomography due to the possible metallophilic interactions. These results suggest that the post-surface modification of nanoclusters will be an ideal tool to address the sustainable production of green hydrogen.

Hydrogen on Colloidal Gold Nanoparticles

Colloidal gold nanoparticles (AuNPs) have myriad scientific and technological applications, but their fundamental redox chemistry is underexplored. Reported here are titration studies of oxidation and reduction reactions of aqueous AuNP colloids, which show that the AuNPs bind substantial hydrogen (electrons + protons) under mild conditions. The 5 nm AuNPs are reduced to a similar extent with reductants from borohydrides to H2 and are reoxidized back essentially to their original state by oxidants, including O2. The reactions were monitored via surface plasmon resonance (SPR) optical absorption, which was shown to be much more sensitive to surface H than to changes in solution conditions. Reductions with H2 occurred without pH changes, demonstrating that hydrogenation forms surface H rather than releasing H+. Computational studies suggested that an SPR blueshift was expected for H atom addition, while just electron addition likely would have caused a redshift. Titrations consistently showed a maximum redox change of the 5 nm NPs, independent of the reagent, corresponding to 9% of the total gold or ∼30% hydrogen surface coverage (∼370 H per AuNP). Larger AuNPs showed smaller maximum fractional surface coverages. We conclude that H binds to the edge, corner, and defect sites of the AuNPs, which explains the stoichiometric limitation and the size effect. The finding of substantial and stable hydrogen on the AuNP surface under mild reducing conditions has potential implications for various applications of AuNPs in reducing environments, from catalysis to biomedicine. This finding contrasts with the behavior of bulk gold and with the typical electron-focused perspective in this field.

Deciphering the Molecular Mechanism of Substrate-Induced Assembly of Gold Nanocube Arrays toward an Accelerated Electrocatalytic Effect Employing Heterogeneous Diffusion Field Confinement

The complex electrocatalytic performance of gold nanocubes (AuNCs) is the focus of this work. The faceted shapes of AuNCs and the individual assembly processes at the electrode surfaces define the heterogeneous conditions for the purpose of electrocatalytic processes. Topographic and electron imaging demonstrated slightly rounded AuNC (average of 38 nm) assemblies with sizes of ≤1 μm, where the dominating patterns are (111) and (200) crystallographic planes. The AuNCs significantly impact the electrochemical performance of the investigated electrode [indium-tin oxide (ITO), glassy carbon (GC), and bulk gold] systems driven by surface electrons promoting the catalytic effect. Cyclic voltammetry in combination with scanning electrochemical microscopy allowed us to decipher the molecular mechanism of substrate-induced electrostatic assembly of gold nanocube arrays, revealing that the accelerated electrocatalytic effect should be attributed to the confinement of the heterogeneous diffusion fields with tremendous electrochemically active surface area variations. AuNC drop-casting at ITO, GC, and Au led to various mechanisms of heterogeneous charge transfer; only in the case of GC did the decoration significantly increase the electrochemically active surface area (EASA) and ferrocyanide redox kinetics. For ITO and Au substrates, AuNC drop-casting decreases system dimensionality rather than increasing the EASA, where Au-Au self-diffusion was also observed. Interactions of the gold, ITO, and GC surfaces with themselves and with surfactant CTAB and ferrocyanide molecules were investigated using density functional theory.

Synthesis, Chemical-Physical Characterization, and Biomedical Applications of Functional Gold Nanoparticles: A Review

Relevant properties of gold nanoparticles, such as stability and biocompatibility, together with their peculiar optical and electronic behavior, make them excellent candidates for medical and biological applications. This review describes the different approaches to the synthesis, surface modification, and characterization of gold nanoparticles (AuNPs) related to increasing their stability and available features useful for employment as drug delivery systems or in hyperthermia and photothermal therapy. The synthetic methods reported span from the well-known Turkevich synthesis, reduction with NaBH4 with or without citrate, seeding growth, ascorbic acid-based, green synthesis, and Brust-Schiffrin methods. Furthermore, the nanosized functionalization of the AuNP surface brought about the formation of self-assembled monolayers through the employment of polymer coatings as capping agents covalently bonded to the nanoparticles. The most common chemical-physical characterization techniques to determine the size, shape and surface coverage of AuNPs are described underlining the structure-activity correlation in the frame of their applications in the biomedical and biotechnology sectors.

Gold Nanoparticles- Boon in Cancer Theranostics

BACKGROUND

Cancer is the world's second-largest cause of death, with an estimated 9.6 million fatalities in 2018. Malignant tumour (cancer) is caused by a mixture of genetic modifications due to the environmental variables that tend to activate or inactivate different genes, ultimately resulting in neoplastic transformations. Cancer is a multi-stage process that results from the conversion of the ordinary cells to tumour cells and progresses from a pre-cancer lesion to abnormal growth.

METHODS

Chemotherapy inhibits the ability of the cells to divide rapidly in an abnormal manner, but this treatment simultaneously affects the entire cellular network in the human body leading to cytotoxic effects. In this review article, the same issue has been addressed by discussing various aspects of the newer class of drugs in cancer therapeutics, i.e., Gold Nanoparticles (AuNPs) from metal nanoparticle (NP) class.

RESULTS

Metal NPs are advantageous over conventional chemotherapy as the adverse drug reactions are lesser. Additionally, ease of drug delivery, targeting and gene silencing are salient features of this treatment. Functionalized ligand-targeting metal NPs provide better energy deposition control in tumour. AuNPs are promising agents in the field of cancer treatment and are comprehensively studied as contrast agents, carriers of medicinal products, radiosensitizers and photothermal agents. For the targeted delivery of chemotherapeutic agents, AuNPs are used and also tend to enhance tumour imaging in vivo for a variety of cancer types and diseased organs.

CONCLUSION

The first part of the review focuses on various nano-carriers that are used for cancer therapy and deals with the progression of metal NPs in cancer therapy. The second part emphasizes the use of nanotechnology by considering the latest studies for diagnostic and therapeutic properties of AuNPs. AuNPs present the latest studies in the field of nanotechnology, which leads to the development of early-stage clinical trials. The next part of the review discusses the major features of five principal types of AuNPs: gold nanorods, gold nanoshells, gold nanospheres, gold nanocages, and gold nanostars that have their application in photothermal therapy (PTT).

Preparation of polymer gold nanoparticle composites with tunable plasmon coupling and their application as SERS substrates

The controlled surface functionalisation of polystyrene beads (200 nm) with a lipoic acid derivative is used to assemble composites with between 4 to 20% loadings of citrate stabilised gold nanoparticles (13 nm-30 nm), which exhibit variable optical properties arising from interactions of the nanoparticle surface plasmon resonance (SPR). The decrease in average interparticle distance at higher loadings results in a red-shift in the SPR wavelength, which is well described by a universal ruler equation. The composite particles are shown to act as good SERS substrates for the standard analyte 4-mercaptophenol. The direct assessment of the SERS activity for individual composite particles solution is achieved by Raman optical tweezer measurements on 5.3 μm composite particles. These measurements show an increase in performance with increasing AuNP size. Importantly, the SERS activity of the individual particles compares well with the bulk measurements of samples deposited on a surface, indicating that the SERS activity arises primarily from the composite and not due to composite-composite interactions. In both studies the optimum SERS response is obtained with 30 nm AuNPs.

Gold nanoparticles as an outstanding catalyst for the hydrogen evolution reaction

An electrode made of Au nanoparticles, ca. 13 nm in diameter, displays outstanding catalytic activity for the hydrogen evolution reaction in water.

Active Electrochemical Plasmonic Switching on Polyaniline-Coated Gold Nanocrystals

High-performance electrochemical plasmonic switching is realized on both single-particle and ensemble levels by coating polyaniline on colloidal gold nanocrystals through surfactant-assisted oxidative polymerization. Under small applied potentials, the core@shell nanostructures exhibit reversible plasmon shifts as large as 150 nm, a switching time of less than 10 ms, and a high switching stability.

Electrocatalytic Oxidation of Alcohols, Tripropylamine, and DNA with Ligand-Free Gold Nanoclusters on Nitrided Carbon

Electrocatalytic properties of ligand-free gold nanoclusters (AuNCs, <2 nm) grown on nitrided carbon supports (denoted as AuNCs@N-C) were evaluated for the oxidation of representative organic molecules including alcohols, an amine, and deoxyguanosine in oligonucleotides. AuNCs@N-C catalysts were incorporated into films of architecture {PDDA/AuNCs@N-C} _n by using layer-by-layer assembly with oppositely charged poly(diallyldimethylammonium) (PDDA) on pyrolytic graphite (PG) electrodes. Cyclic voltammetry and electrochemical impedance spectroscopy (EIS) were used to survey the electrocatalytic properties of these AuNCs@N-C films. Ligand-free AuNCs in these films demonstrated excellent electrocatalytic oxidation activity with maximum peak currents and the lowest potentials for oxidizing ethanol, propanol, and tripropylamine (TprA) compared to controls with Au-surface capping agents or to larger sized Au nanocrystals on the nitrided carbon supports. EIS kinetic studies showed that ligand-free AuNCs films have the smallest charge-transfer resistance, largest electrochemically active surface area, and largest apparent standard rate constants, as compared to the control films for all compounds examined. DNA films on AuNCs@N-C were oxidized at deoxyguanosine moieties with good catalytic activity that depended on charge transport within the films.

Imaging electrocatalytic processes on single gold nanorods

Imaging electrochemical processes has attracted increasing attention in past decades. Particularly, monitoring electrochemical reactions rapidly at the nano-scale is still a challenge due to the ultra-low current detection and long scanning time required. The development of optical techniques provide a new way to demonstrate electrochemical processes through optical signals which enhance sensitivity and spatial resolution. Herein, we developed a novel method to image electrocatalytic processes on single gold nanorods (GNRs) during Cyclic Voltammetry (CV) scanning based on plasmon resonance scattering information by using dark-field microscopy. The electrocatalytic oxidation of hydrogen peroxide was selected as a typical reaction and the catalytic mechanism was revealed using the obtained spectra. Notably, observation on single GNRs avoided the averaging effects in bulk systems and confirmed that the individual nanoparticles had variable catalytic properties with different spectral change during the reaction process. Furthermore, a color-amplified system was introduced to convert light intensity into imaging information via the Matlab program which was able to image thousands of nanoparticles simultaneously. This approach offered the statistical intensity distribution of all of the nanoparticles in a dark-field image which dramatically enhanced the detection accuracy and avoided random events.

Interferometric Detection of Single Gold Nanoparticles Calibrated against TEM Size Distributions

Single nanoparticle analysis: An interferometric optical approach calibrates sizes of gold nanoparticles (AuNPs) from the interference intensities by calibrating their interferometric signals against the corresponding transmission electron microscopy measurements. This method is used to investigate whether size affects the diffusion behavior of AuNPs conjugated to supported lipid bilayer membranes and to multiplex the simultaneous detection of three different AuNP labels.

Enzyme-free electrochemical immunosensor based on host-guest nanonets catalyzing amplification for procalcitonin detection

An enzyme-free electrochemical immunosensor based on the host-guest nanonets of N,N-bis(ferrocenoyl)-diaminoethane/β-cyclodextrins/poly(amidoamine) dendrimer-encapsulated Au nanoparticles (Fc-Fc/β-CD/PAMAM-Au) for procalcitonin (PCT) detection has been developed in this study. The signal probe was constructed as follows: amine-terminated β-CD was adsorbed to PAMAM-Au first, and then the prepared Fc-Fc was recognized by the β-CD to form stable host-guest nanonets. Next, secondary antibodies (Ab2) were attached into the formed netlike nanostructure of Fc-Fc/β-CD/PAMAM-Au by chemical absorption between PAMAM-Au and -NH2 of β-CD. Herein, the PAMAM-Au act not only as nanocarriers for anchoring large amounts of the β-CD and Ab2 but also as nanocatalysts to catalyze the oxidation of ascorbic acid (AA) for signal amplification. Moreover, the Fc-Fc could be stably immobilized by the hydrophobic inner cavity of β-CD as well as improving solubility by the hydrophilic exterior of β-CD. With the unique structure of two ferrocene units, Fc-Fc not only affords more electroactive groups to make the electrochemical response more sensitive but also plays a role of combining dispersive β-CD-functionalized PAMAM-Au to form the netlike nanostructure. Furthermore, Fc-Fc exhibits good catalytic activity for AA oxidation. When the detection solution contained AA, the synergetic catalysis of PAMAM-Au and Fc-Fc to AA oxidation could be obtained, realizing enzyme-free signal amplification. The proposed immunosensor provided a linear range from 1.80 pg/mL to 500 ng/mL for PCT detection and a detection limit of 0.36 pg/mL under optimal experimental conditions. Moreover, the immunosensor has shown potential application in clinical detection of PCT.

Visible light-induced enhanced photoelectrochemical and photocatalytic studies of gold decorated SnO2nanostructures

Visible light-induced photocatalytic degradation of colored dyes using Au–SnO₂nanocomposite.

Amplified and selective detection of manganese peroxidase genes based on enzyme-scaffolded-gold nanoclusters and mesoporous carbon nitride

This work has demonstrated an amplified and selective detection platform using enzyme-scaffolded-gold nanoclusters as signal label, coupling with mesoporous carbon nitride (MCN) and gold nanoparticles (GNPs) modified glassy carbon electrode (GCE). Streptavidin-horseradish peroxidase (SA-HRP) has been integrated with gold nanoclusters (GNCs) as scaffold using a simple, fast and non-toxic method. The mechanisms of enzymatic amplification, redox cycling and signal amplification by this biosensor were discussed in detail. GNCs might perform important roles as electrocatalyst as well as electron transducer in these processes. The concentrations of reagents and the reaction times of these reagents were optimized to improve the analytical performances. Under the optimized condition, the signal response to enzyme-scaffolded-gold nanoclusters catalyzed reaction was linearly related to the natural logarithm of the target nucleic acid concentration in the range from 10(-17)M to 10(-9)M with a correlation coefficient of 0.9946, and the detection limit was 8.0×10(-18)M (S/N=3). Besides, synthesized oligonucleotide as well as Phanerochaete chrysosporium MnP fragments amplified using polymerase chain reaction and digested by restriction endonucleases were tested. Furthermore, this biosensor exhibited good precision, stability, sensitivity, and selectivity, and discriminated satisfactorily against mismatched nucleic acid samples of similar lengths.

Single-particle spectroscopy reveals heterogeneity in electrochemical tuning of the localized surface plasmon

A hyperspectral imaging method was developed that allowed the identification of heterogeneous plasmon response from 50 nm diameter gold colloidal particles on a conducting substrate in a transparent three-electrode spectroelectrochemical cell under non-Faradaic conditions. At cathodic potentials, we identified three distinct behaviors from different nanoparticles within the same sample: irreversible chemical reactions, reversible chemical reactions, and reversible charge density tuning. The irreversible reactions in particular would be difficult to discern in alternate methodologies. Additional heterogeneity was observed when single nanoparticles demonstrating reversible charge density tuning in the cathodic regime were measured dynamically in anodic potential ranges. Some nanoparticles that showed charge density tuning in the cathodic range also showed signs of an additional chemical tuning mechanism in the anodic range. The expected changes in nanoparticle free-electron density were modeled using a charge density-modified Drude dielectric function and Mie theory, a commonly used model in colloidal spectroelectrochemistry. Inconsistencies between experimental results and predictions of this common physical model were identified and highlighted. The broad range of responses on even a simple sample highlights the rich experimental and theoretical playgrounds that hyperspectral single-particle electrochemistry opens.

One-step interfacial thiol-ene photopolymerization for metal nanoparticle-decorated microcapsules (MNP@MCs)

We herein reported a one-step strategy to prepare the noble metal nanoparticle-decorated microcapsules (MNP@MCs) through the interfacial thiol-ene photopolymerization. In the presence of amphiphlic polyhedral oligomeric silsesquioxane (POSS) containing thiol groups (PTPS) as a reactive surfactant and trimethylolpropane triacrylate (TMPTA) as a cross-linker, the oil phase of toluene dissolved with a photoinitiator was emulsified into a water phase containing a metal precursor to form an oil-in-water (O/W) emulsion. Upon irradiation of ultraviolet (UV) light, the thiol-ene photoploymerization and photoreduction at the interface of toluene/water lead to the formation of the cross-linked wall and metal nanoparticles, respectively. A series of gold, silver, and platinum nanoparticle-decorated microcapsules (AuNP@MC, AgNP@MC, and PtNP@MC) were prepared through this one-step interfacial thiol-ene photopolymerization and were characterized carefully by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM). The results revealed that the obtained MNP@MCs were 2.2-2.7 μm in diameter with a wall of 40-70 nm in thickness, which was covered with the metal nanoparticles. The size and amount of metal nanoparticles increased with the increasing concentration of the metal precursor in water. Furthermore, the catalyst performance of AuNP@MC was studied by reduction of aromatic nitro compounds and exhibited the enhanced catalytic activity and good stability in the reduction of hydrophobic nitrophenol. It is believed that this robust, convenient, simple strategy based on the one-step interfacial thiol-ene photopolymerization will provide an important alternative to fabricate the functional metal nanoparticle-modified microcapsules.

Interactions of gold nanoparticles with a phospholipid monolayer membrane on mercury

It is demonstrated that a compact monolayer of 1,2-dioleoyl-sn-glycero-3-phosphocholine adsorbed to a hanging mercury drop electrode can serve as a simple electrochemical model system to study biomembrane penetration by gold nanoparticles. The hydrogen redox-chemistry characteristic of ligand-stabilized gold nanoparticles in molecularly close contact with a mercury electrode is used as an indicator of membrane penetration. Results for water-dispersible gold nanoparticles of two different sizes are reported, and comparisons are made with the cellular uptake of the same preparations of nanoparticles by a common human fibroblast cell line. The experimental system described here can be used to study physicochemical aspects of membrane penetration in the absence of complex biological mechanisms, and it could also be a starting point for the development of a test bed for the toxicity of nanomaterials.

Synthesis of gold nanoparticles and nanoclusters in a supramolecular gel and their applications in catalytic reduction of p-nitrophenol to p-aminophenol and Hg(ii) sensing

Seven gelator molecules giving supramolecular gels produced Au-nanoparticles and fluorescent, small Au-nanoclusters. Such Au-nanoparticle containing gels catalyzed the reduction of p-nitrophenol to p-aminophenol without NaBH₄. The fluorescent Au-nanoclusters acted as a Hg(ii) sensor.

Gold nanoparticles produced in situ mediate bioelectricity and hydrogen production in a microbial fuel cell by quantized capacitance charging

Oppan quantized style: By adding a gold precursor at its cathode, a microbial fuel cell (MFC) is demonstrated to form gold nanoparticles that can be used to simultaneously produce bioelectricity and hydrogen. By exploiting the quantized capacitance charging effect, the gold nanoparticles mediate the production of hydrogen without requiring an external power supply, while the MFC produces a stable power density.