An Efficient Iridium Catalyst for Reduction of Carbon Dioxide to Methane with Trialkylsilanes

Reduction of CO2 in the presence of light via excited-state hydride transfer reaction in a NADPH-inspired derivative

The photo-catalytic reduction of CO2 into chemical feedstocks using solar energy has attracted vast interest in environmental science because of global warming. Based on our previous study on the CO2 complex with one of the benzimidazoline (BI) derivatives, we explore the photochemical reduction of CO2 in one of the benzimidazoline derivatives (1,3-dimethyl-5,6-diol-2,3-dihydro-1H-benzimidazole) by quantum-chemical methods. Our results reveal that carbon dioxide can be reduced to formate (HCOO-) by a hydride transfer reaction in the excited state of this complex of benzimidazoline derivative and CO2. While the ground-state hydride transfer reaction in this complex exhibits a substantial barrier, a charge-transfer can occur in the first singlet excited state of the complex in the UV-A region (326 nm), and after overcoming a moderate barrier (∼0.4 eV) the system can have access to the products. The interaction with a polar solvent decreases further the barrier such that the reaction in dimethyl sulfoxide can proceed with a negligibly small barrier (∼0.1 eV) or in a nearly barrierless manner. Our results show that this benzimidazoline derivative may act as a catalyst in the photoreduction of CO2.

Homogeneous and Heterogeneous Frustrated Lewis Pairs for the Activation and Transformation of CO2

Due to the serious ecological problems caused by the high CO2 content in the atmosphere, reducing atmospheric CO2 has attracted widespread attention from academia and governments. Among the many ways to mitigate CO2 concentration, the capture and comprehensive utilization of CO2 through chemical methods have obvious advantages, whose key is to develop suitable adsorbents and catalysts. Frustrated Lewis pairs (FLPs) are known to bind CO2 through the interaction between unquenched Lewis acid sites/Lewis base sites with the O/C of CO2, simultaneously achieving CO2 capture and activation, which render FLP better potential for CO2 utilization. However, how to construct efficient FLP targeted for CO2 utilization and the mechanism of CO2 activation have not been systematically reported. This review firstly provides a comprehensive summary of the recent advances in the field of CO2 capture, activation, and transformation with the help of FLP, including the construction of homogeneous and heterogeneous FLPs, their interaction with CO2, reaction activity, and mechanism study. We also illustrated the challenges and opportunities faced in this field to shed light on the prospective research.

Highly Electrophilic Mononuclear Cationic Aluminium Alkoxide Complexes: Syntheses, Reactivity and Catalytic Applications

Herein, we report the synthesis of β-diketiminate-supported aluminium complexes bearing terminal alkoxide and mono-thiol functional groups: LAlOMe(Et) (2), LAlOtBu(Et) (3), and LAlSH(Et) (4), (L=[HC{C(Me)N-(2,6-iPr2 C6 H3 )}2 ]). Complexes 2 and 3 are further used as synthons to generate the fascinating cationic aluminium alkoxide complexes, [LAlOMe(μ-OMe)-Al(Et)L][EtB(C6 F5 )3 ] (5), [LAlOMe(OEt2 )][EtB(C6 F5 )3 ] (6), and [LAlOtBu(OEt2 )][EtB(C6 F5 )3 ] (8). These electrophilic cationic species are well characterized by spectroscopic and crystallographic techniques. The assessment of Lewis acidity by the Gutmann-Beckett method revealed superior Lewis acidity of the cations substituted with electron-demanding alkoxy groups in comparison to the known methyl analogue [LAlMe][B(C6 F5 )4 ]. This has been further endorsed by computational calculations to determine the NBO charges and hydride ion affinity for complexes 6 and 8. These complexes are also capable of activating triethylsilane in stoichiometric reactions. The applicability of these complexes has been realized in the hydrosilylation of ethers, carbonyls, and olefines. Additionally, the solid-state structure of a new THF stabilized aluminium halide cation [LAlCl(THF)][B(C6 F5 )4 ] (11) has also been reported.

Catalytic regeneration of metal-hydrides from their corresponding metal-alkoxides via the hydroboration of carbonates to obtain methanol and diols

Thorium complexes decorated with 5-, 6-, and 7-membered N-heterocyclic iminato ligands containing mesityl wingtip substitutions have been synthesized and fully characterized. These complexes were found to be efficient in the hydroboration of cyclic and linear organic carbonates with HBpin or 9-BBN promoting their decarbonylation and producing the corresponding boronated diols and methanol. In addition, the hydroboration of CO2 breaks the molecule into "CO" and "O" forming boronated methanol and pinBOBpin. Moreover, the demanding depolymerization of polycarbonates to the corresponding boronated diols and methanol opens the possibility of recycling polymers for energy sources. Increasing the core ring size of the ligands allows a better performance of the complexes. The reaction proceeds with high yields under mild reaction conditions, with low catalyst loading, and short reaction times, and shows a broad applicability scope. The reaction is achieved via the recycling of a high-energy Th-H moiety from a stable Th-OR motif. Experimental evidence and DFT calculations corroborate the formation of the thorium hydride species and the reduction of the carbonate with HBpin to the corresponding Bpin-protected alcohols and H3COBpin through the formate and acetal intermediates.

Cutting-Edge Electrocatalysts for CO2RR

A world-wide growing concern relates to the rising levels of CO₂ in the atmosphere that leads to devastating consequences for our environment. In addition to reducing emissions, one alternative strategy is the conversion of CO₂ (via the CO₂ Reduction Reaction, or CO₂RR) into added-value chemicals, such as CO, HCOOH, C₂H₅OH, CH₄, and more. Although this strategy is currently not economically feasible due to the high stability of the CO₂ molecule, significant progress has been made to optimize this electrochemical conversion, especially in terms of finding a performing catalyst. In fact, many noble and non-noble metal-based systems have been investigated but achieving CO₂ conversion with high faradaic efficiency (FE), high selectivity towards specific products (e.g., hydrocarbons), and maintaining long-term stability is still challenging. The situation is also aggravated by a concomitant hydrogen production reaction (HER), together with the cost and/or scarcity of some catalysts. This review aims to present, among the most recent studies, some of the best-performing catalysts for CO₂RR. By discussing the reasons behind their performances, and relating them to their composition and structural features, some key qualities for an "optimal catalyst" can be defined, which, in turn, will help render the conversion of CO₂ a practical, as well as economically feasible process.

PNP-type ligands enabled copper-catalyzed N-formylation of amines with CO2 in the presence of silanes

The sustainable catalytic transformation of carbon dioxide into valuable fine chemicals with high efficiency is a global challenge as although CO₂ is an abundant, nontoxic, and sustainable carbon feedstock it is also the most important factor behind the Greenhouse Effect. We describe herein a PNP-type ligand-enabled copper-catalyzed N-formylation of amines utilizing CO₂ as the building block in the presence of hydrosilane as the reductant. Our current protocol featured newly synthesized PNP-type ligands with broad substrate scope under mild reaction conditions.

Optimal Icosahedral Copper-Based Bimetallic Clusters for the Selective Electrocatalytic CO2 Conversion to One Carbon Products

Electrochemical CO2 reduction reactions can lead to high value-added chemical and materials production while helping decrease anthropogenic CO2 emissions. Copper metal clusters can reduce CO2 to more than thirty different hydrocarbons and oxygenates yet they lack the required selectivity. We present a computational characterization of the role of nano-structuring and alloying in Cu-based catalysts on the activity and selectivity of CO2 reduction to generate the following one-carbon products: carbon monoxide (CO), formic acid (HCOOH), formaldehyde (H2C=O), methanol (CH3OH) and methane (CH4). The structures and energetics were determined for the adsorption, activation, and conversion of CO2 on monometallic and bimetallic (decorated and core@shell) 55-atom Cu-based clusters. The dopant metals considered were Ag, Cd, Pd, Pt, and Zn, located at different coordination sites. The relative binding strength of the intermediates were used to identify the optimal catalyst for the selective CO2 conversion to one-carbon products. It was discovered that single atom Cd or Zn doping is optimal for the conversion of CO2 to CO. The core@shell models with Ag, Pd and Pt provided higher selectivity for formic acid and formaldehyde. The Cu-Pt and Cu-Pd showed lowest overpotential for methane formation.

Light-driven reduction of CO2: thermodynamics and kinetics of hydride transfer reactions in benzimidazoline derivatives

CO₂ capture, conversion and storage belong to the holy grail of environmental science. We therefore explore an important photochemical hydride transfer reaction of benzimidazoline derivatives with CO₂ in a polar solvent (dimethylsulfoxide) by quantum-chemical methods. While the excited electronic state undergoing hydride transfer to formate (HCOO^-) shows a higher reaction path barrier compared to the ground state, a charge-transfer can occur in the near-UV region with nearly barrierless access to the products involving a conical intersection between both electronic states. Such radiationless decay through the hydride transfer reaction and formation of HCCO^-via excited electronic states in suitable organic compounds opens the way for future photochemical CO₂ reduction. We provide a detailed analysis for the chemical CO₂ reduction to the formate anion for 15 different benzimidazoline derivatives in terms of thermodynamic hydricities (ΔG_H^-), activation free energies (ΔG‡HT), and reaction free energies (ΔG_rxn) for the chosen solvent dimethylsulfoxide at the level of density functional theory. The calculated hydricities are in the range from 35.0 to 42.0 kcal mol^-1i.e. the species possess strong hydride donor abilities required for the CO₂ reduction to formate, characterized by relatively low activation free energies between 18.5 and 22.2 kcal mol^-1. The regeneration of the benzimidazoline can be achieved electrochemically.

Thermally stable zinc hydride catalyst for hydrosilylation of CO2 to silyl formate at atmospheric pressure

Neutral zinc complexes supported by H[PNNO], a diaminophenolate ligand bearing a pendant phosphine group, were synthesized and characterized. The phosphine arm adopts two different configurations in solution and prevents aggregation. The monomeric zinc hydride complex is stable at elevated temperatures up to 125 °C and reacts readily with CO₂ to afford a zinc formate complex. The zinc hydride is active for CO₂ hydrosilylation at atmospheric CO₂ pressure and is selective for CO₂ reduction to the silyl-formate product.

Catalytic reduction of carbon dioxide by a zinc hydride compound, [Tptm]ZnH, and conversion to the methanol level

The zinc hydride compound, [Tptm]ZnH, may achieve the reduction of CO₂ by (RO)₃SiH (R = Me, Et) to the methanol oxidation level, (MeO)_xSi(OR)_4-x, via the formate species, HCO₂Si(OR)₃. However, because insertion of CO₂ into the Zn-H bond is more facile than insertion of HCO₂Si(OR)₃, conversion of HCO₂Si(OR)₃ to the methanol level only occurs to a significant extent in the absence of CO₂.

Hydroboration of CO2 to Methyl Boronate Catalyzed by a Manganese Pincer Complex: Insights into the Reaction Mechanism and Ligand Effect

The conversion of carbon dioxide to fuels, polymers, and chemicals is an attractive strategy for the synthesis of high-value-added products and energy-storage materials. Herein, the density functional theory method was employed to investigate the reaction mechanism of CO₂ hydroboration catalyzed by manganese pincer complex, [Mn(Ph₂PCH₂SiMe₂)₂NH(CO)₂Br]. The carbonyl association and carbonyl dissociation mechanisms were investigated, and the calculated results showed that the carbonyl association mechanism is more favorable with an energetic span of 27.0 kcal/mol. Meanwhile, the solvent effect of the reaction was explored, indicating that the solvents could reduce the catalytic activity of the catalyst, which was consistent with the experimental results. In addition, the X ligand effect (X = CO, Br, H, PH₃) on the catalytic activity of the manganese complex was explored, indicating that the anionic complexes [Mn^I - Br]^- and [Mn^I - H]^- have higher catalytic activity. This may not only shed light on the fixation and conversion of CO₂ catalyzed by earth-abundant transition-metal complexes but also provide theoretical insights to design new transition-metal catalysts.

Activation of Si–H and B–H bonds by Lewis acidic transition metals and p-block elements: same, but different

In this Perspective we discuss the ability of transition metal complexes to activate and cleave the Si–H and B–H bonds of hydrosilanes and hydroboranes (tri- and tetra-coordinated) in an electrophilic manner, avoiding the need for the metal centre to undergo two-electron processes (oxidative addition/reductive elimination). A formal polarization of E–H bonds (E = Si, B) upon their coordination to the metal centre to form σ-EH complexes (with coordination modes η¹ or η²) favors this type of bond activation that can lead to reactivities involving the formation of transient silylium and borenium/boronium cations similar to those proposed in silylation and borylation processes catalysed by boron and aluminium Lewis acids. We compare the reactivity of transition metal complexes and boron/aluminium Lewis acids through a series of catalytic reactions in which pieces of evidence suggest mechanisms involving electrophilic reaction pathways.

In this Perspective we compare the ability of transition metals and p-block Lewis acids to activate electrophilically hydrosilanes and hydroboranes. The mechanistic similarities and dissimilarities in different catalytic transformations are analyzed.

Hydrosilylative reduction of carbon dioxide by a homoleptic lanthanum aryloxide catalyst with high activity and selectivity

An efficient tandem hydrosilylation of CO2, which uses a combination of a simple, homoleptic lanthanum aryloxide and B(C6F5)3, was performed. Use of a less sterically hindered silane led to an exclusive reduction of CO2 to CH4, with a turnover frequency of up to 6000 h-1 at room temperature. The catalytic system is robust, and 19 400 turnovers could be achieved with 0.005 mol% loading of lanthanum. The reaction outcome depended highly on the nature of the silane reductant used. Selective production of the formaldehyde equivalent, i.e., bis(silyl)acetal, without over-reduction, was observed when a sterically bulky silane was used. The reaction mechanism was elucidated by stoichiometric reactions and DFT calculations.

Reaction of a Molybdenum Bis(dinitrogen) Complex with Carbon Dioxide: A Combined Experimental and Computational Investigation

Refluxing Mo(CO)₆ in the presence of the phosphine-functionalized α-diimine ligand ^Ph2PPrDI allowed for substitution and formation of the dicarbonyl complex, (^Ph2PPrDI)Mo(CO)₂. Oxidation with I₂ followed by heating resulted in further CO dissociation and isolation of the corresponding diiodide complex, (^Ph2PPrDI)MoI₂. Reduction of this complex under a N₂ atmosphere afforded the corresponding bis(dinitrogen) complex, (^Ph2PPrDI)Mo(N₂)₂. The solid-state structures of all three compounds were found to feature a tetradentate chelate and cis-monodentate ligands. Notably, the addition of CO₂ to (^Ph2PPrDI)Mo(N₂)₂ is proposed to result in head-to-tail CO₂ coupling to generate the corresponding metallacycle and ultimately a mixture of (^Ph2PPrDI)Mo(CO)₂ and the bis(oxo) dimer, [(κ³-^Ph2PPrDI)Mo(O)(μ-O)]₂. Computational studies have been performed to gain insight into the reaction and evaluate the importance of cis-coordination sites for selective head-to-tail CO₂ reductive coupling, CO deinsertion, disproportionation, and stepwise CO₂ deinsertion.

Selective photocatalytic production of CH4 using Zn-based polyoxometalate as a nonconventional CO2 reduction catalyst

Efficient and selective production of CH₄ through the CO₂ reduction reaction (CO2RR) is a challenging task due to the high amount of energy consumption and various reaction pathways. Here, we report the synthesis of Zn-based polyoxometalate (ZnPOM) and its application in the photocatalytic CO2RR. Unlike conventional Zn-based catalysts that produce CO, ZnPOM can selectively catalyze the production of CH₄ in the presence of an Ir-based photosensitizer (TIr3) through the photocatalytic CO2RR. Photophysical and computation analyses suggest that selective photocatalytic production of CH₄ using ZnPOM and TIr3 can be attributed to (1) the exceptionally fast transfer of photogenerated electrons from TIr3 to ZnPOM through the strong molecular interactions between them and (2) effective transfer of electrons from ZnPOM to *CO intermediates due to significant hybridization of their molecular orbitals. This study provides insights into the design of novel CO2RR catalysts for CH₄ production beyond the limitations in conventional studies that focus on Cu-based materials.

CO2 hydrogenation over functional nanoporous polymers and metal-organic frameworks

CO₂ is one of the major environmental pollutants and its mitigation is attracting huge attention over the years due to continuous increase in this greenhouse gas emission in the atmosphere. Being environmentally hazardous and plentiful presence in nature, CO₂ utilization as C1 resource into fuels and feedstock is very demanding from the green chemistry perspectives. To accomplish this CO₂ utilization issue, functional organic materials like porous organic polymers (POPs), covalent organic frameworks (COFs) as well as organic-inorganic hybrid materials like metal-organic frameworks (MOFs), having characteristics of large surface area, high thermal stability and tunability in the porous nanostructures play significant role in designing the suitable catalyst for the CO₂ hydrogenation reactions. Although CO₂ hydrogenation is a widely studied and emerging area of research, till date review exclusively focused on designing POPs, COFs and MOFs bearing reactive functional groups is very limited. A thorough literature review on this matter will enrich our knowledge over the CO₂ hydrogenation processes and the catalytic sites responsible for carrying out these chemical transformations. We emphasize recent state-of-the art developments in POPs/COFs/MOFs having unique functionalities and topologies in stabilizing metallic NPs and molecular complexes for the CO₂ reduction reactions. The major differences between MOFs and porous organics are critically summarized in the outlook section with the aim of the future benefit in mitigating CO₂ emission from ambient air.

More Than Just a Reagent: The Rise of Renewable Organohydrides for Catalytic Reduction of Carbon Dioxide

Stoichiometric carbon dioxide reduction to highly reduced C1 molecules, such as formic acid (2e^- ), formaldehyde (4e^- ), methanol (6e^- ) or even most-reduced methane (8e^- ), has been successfully achieved by using organosilanes, organoboranes, and frustrated Lewis Pairs (FLPs) in the presence of suitable catalyst. The development of renewable organohydride compounds could be the best alternative in this regard as they have shown promise for the transfer of hydride directly to CO₂ . Reduction of CO₂ by two electrons and two protons to afford formic acid by using renewable organohydride molecules has recently been investigated by various groups. However, catalytic CO₂ reduction to ≥2e^- -reduced products by using renewable organohydride-based molecules has rarely been explored. This Minireview summarizes important findings in this regard, encompassing both stoichiometric and catalytic CO₂ reduction.

Hydrosilyation of CO2 using a silatrane hydride: structural characterization of a silyl formate compound

The silatrane hydride compound, [N(CH2CH2O)3]SiH, reacts with CO2 in the presence of the [tris(2-pyridylthio)methyl]zinc hydride complex, [Tptm]ZnH, to afford the silyl formate and methoxide derivatives, [N(CH2CH2O)3]SiO2CH and [N(CH2CH2O)3]SiOCH3. The molecular structure of [N(CH2CH2O)3]SiO2CH has been determined by X-ray diffraction, thereby demonstrating that the formate ligand adopts a distal conformation in which the uncoordinated oxygen atom resides with a trans-like disposition relative to silicon. Density functional theory calculations indicate that the atrane motif of [N(CH2CH2O)3]SiO2CH is flexible, such that the energy of the molecule changes relatively little as the Si···N distance varies over the range 2.0–3.0 Å.

Partnering a Three-Coordinate Gallium Cation with a Hydroborate Counter-Ion for the Catalytic Hydrosilylation of CO2

A novel β-diketiminate stabilized gallium hydride, (^Dipp L)Ga(Ad)H (where (^Dipp L)={HC(MeCDippN)₂ }, Dipp=2,6-diisopropylphenyl and Ad=1-adamantyl), has been synthesized and shown to undergo insertion of carbon dioxide into the Ga-H bond under mild conditions. In this case, treatment of the resulting κ¹ -formate complex with triethylsilane does not lead to regeneration of the hydride precursor. However, when combined with B(C₆ F₅ )₃ , (^Dipp L)Ga(Ad)H catalyses the reductive hydrosilylation of CO₂ . Under stoichiometric conditions, the addition of one equivalent of B(C₆ F₅ )₃ to (^Dipp L)Ga(Ad)H leads to the formation of a 3-coordinate cationic gallane complex, partnered with a hydroborate anion, [(^Dipp L)Ga(Ad)][HB(C₆ F₅ )₃ ]. This complex rapidly hydrometallates carbon dioxide and catalyses the selective reduction of CO₂ to the formaldehyde oxidation level at 60 °C in the presence of Et₃ SiH (yielding H₂ C(OSiEt₃ )₂ ). When catalysis is undertaken in the presence of excess B(C₆ F₅ )₃ , appreciable enhancement of activity is observed, with a corresponding reduction in selectivity: the product distribution includes H₂ C(OSiEt₃ )₂ , CH₄ and O(SiEt₃ )₂ . While this system represents proof-of-concept in CO₂ hydrosilylation by a gallium hydride system, the TOF values obtained are relatively modest (max. 10 h^-1 ). This is attributed to the strength of binding of the formatoborate anion to the gallium centre in the catalytic intermediate (^Dipp L)Ga(Ad){OC(H)OB(C₆ F₅ )₃ }, and the correspondingly slow rate of the turnover-limiting hydrosilylation step. In turn, this strength of binding can be related to the relatively high Lewis acidity measured for the [(^Dipp L)Ga(Ad)]⁺ cation (AN=69.8).

Metalloradical complex Co-C˙Ph3 catalyzes the CO2 reduction in gas phase: a theoretical study

Metal-stabilized radicals have been increasingly exploited in modern organic synthesis. Here, we theoretically designed a metalloradical complex Co-C˙Ph3 with the triplet characters through the transition metal cobalt (Co0) coordinating a triphenylmethyl radical. The potential catalytic role of this novel metalloradical in the CO2 reduction with H2/CH4 in the gas phase was explored via density functional theory (DFT) calculations. For the CO2 reduction reaction with H2, there are two possible pathways: one (path A) is the activation of CO2 by Co-C˙Ph3, followed by the hydrogenation of CO2. The other (path B) starts from the splitting of the H-H bond by Co-C˙Ph3, leading to the transition-metal hydride complex CoH-H, which can reduce CO2. DFT computations show that path B is more favorable than path A as their rate-determining free energy barriers are 18.3 and 27.2 kcal mol-1, respectively. However, for the reduction of CO2 by CH4 two different products, CH3COOH and HCOOCH3, can be generated following different reaction routes. Both routes begin with one CH4 molecule approaching the metalloradical Co-C˙Ph3 to form the intermediate CoH-CH3. This intermediate can evolve following two different pathways, depending on whether the H bonded to Co is transferred to the O (pathway PO) or the C (pathway PC) of CO2. Comparing their rate-determining steps, we identified that the PO route is more favorable for the reduction of CO2 by CH4 to CH3COOH with the reaction barrier 24.5 kcal mol-1. Thus, the present Co0-based metalloradical system represents a viable catalytic protocol that can contribute to the effective utilization of small molecules (H2 and CH4) to reduce CO2, and provides an alternative strategy for the exploration of CO2 conversion.

On the Role of Alkali-Metal-Like Superatom Al12 P in Reduction and Conversion of Carbon Dioxide

Developing efficient catalysts for the conversion of CO₂ into fuels and value-added chemicals is of great significance to relieve the growing energy crisis and global warming. With the assistance of DFT calculations, it was found that, different from Al₁₂ X (X=Be, Al, and C), the alkali-metal-like superatom Al₁₂ P prefers to combine with CO₂ via a bidentate double oxygen coordination, yielding a stable Al₁₂ P(η² -O₂ C) complex containing an activated radical anion of CO₂ (i.e., CO₂ ^.- ). Thereby, this compound could not only participate in the subsequent cycloaddition reaction with propylene oxide but also initiate the radical reaction with hydrogen gas to form high-value chemicals, revealing that Al₁₂ P can play an important role in catalyzing these conversion reactions. Considering that Al₁₂ P has been produced in laboratory and is capable of absorbing visible light to drive the activation and transformation of CO₂ , it is anticipated that this work could guide the discovery of additional superatom catalysts for CO₂ transformation and open up a new research field of superatom catalysis.

Recent advances in liquid hydrosilane-mediated catalytic N-formylation of amines with CO2

Carbon dioxide is an ideal raw material for the synthesis of complex organic compounds because of its rich, non-toxic, and good physical properties. It is of great significance to transform CO₂ into valuable fine chemicals and develop a green sustainable cycle of carbon surplus. Based on hydrosilane as a reducing agent, this work summarizes the recent applications of reductive amidation of CO₂ using different catalysts such as organocatalysts, ionic liquids (ILs), salts, transition metal complexes, and solvents. The main factors affecting the reductive amidation of CO₂ and the possible reaction mechanism are discussed. Moreover, the future orientation and catalytic systems of the formylation of amines with CO₂ and hydrosilane are prospected.

This review depicts different types of catalyst systems developed for upgrading of amines and carbon dioxide into N-formylated products in the presence of hydrosilane, with attention on reaction mechanism and process optimization.

Controlling the Product Platform of Carbon Dioxide Reduction: Adaptive Catalytic Hydrosilylation of CO2 Using a Molecular Cobalt(II) Triazine Complex

The catalytic reduction of carbon dioxide (CO2 ) is considered a major pillar of future sustainable energy systems and chemical industries based on renewable energy and raw materials. Typically, catalysts and catalytic systems are transforming CO2 preferentially or even exclusively to one of the possible reduction levels and are then optimized for this specific product. Here, we report a cobalt-based catalytic system that enables the adaptive and highly selective transformation of carbon dioxide individually to either the formic acid, the formaldehyde, or the methanol level, demonstrating the possibility of molecular control over the desired product platform.

A Resin-Supported Formate Catalyst for the Transformative Reduction of Carbon Dioxide with Hydrosilanes

A heterogeneous formate anion catalyst for the transformative reduction of carbon dioxide (CO₂ ) based on a polystyrene and divinylbenzene copolymer modified with alkylammonium formate was prepared from a widely available anion exchange resin. The catalyst preparation was easy and the characterization was carried out by using elemental analysis, Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and solid-state ¹³ C cross-polarization/magic-angle spinning nuclear magnetic resonance (¹³ C CP/MAS NMR) spectroscopy. The catalyst displayed good catalytic activity for the direct reduction of CO₂ with hydrosilanes, tunably yielding silylformate or methoxysilane products depending on the hydrosilanes used. The catalyst was also active for the reductive insertion of CO₂ into both primary and secondary amines. The catalytic activity of the resin-supported formate can be predicted from the FTIR spectra of the catalyst, probably because of the difference in the ionic interaction strength between the supported alkylammonium cations and formate anions. The ion pair density is thought to influence the catalytic activity, as shown by the elemental and solid-state ¹³ C NMR analyses.

A reduced graphene oxide-supported iridium nanocatalyst for selective transformation of alcohols into carbonyl compounds via a green process

A nanocatalyst constructed from reduced graphene oxide and iridium atoms (RGOIrNc) showed high selectivity (99%-100%) and reliability for the transformation of aromatic alcohols into carbonyl compounds via ultrasonication without using harmful chemicals and solvents. Experimental data including Fourier transform infrared spectroscopy, x-ray diffraction, spherical-aberration-corrected field emission transmission electron microscopy and Raman spectra confirmed the nanostructure of the RGOIrNc. Noticeably, the structural characteristics of this catalyst remained unchanged within 25 catalytic cycles and the activity and selectivity for the transformation of benzylic alcohols showed good stability. The average turnover frequency is greater than 9000 h^-1, the total turnover number is more than 150 000 after 25 catalytic cycles and the productivity of carbonyl compounds reaches 376 048 [Formula: see text], indicating that RGOIrNc catalyst has good durability and stability and high 'greenness'.

Tandem deoxygenative hydrosilation of carbon dioxide with a cationic scandium hydridoborate and B(C6F5)3

A scandium hydridoborate complex supported by the dianionic pentadentate ligand B₂Pz₄Py is prepared via hydride abstraction from the previously reported scandium hydride complex with tris-pentafluorophenyl borane.

Triazinetriamine-derived porous organic polymer-supported copper nanoparticles (Cu-NPs@TzTa-POP): an efficient catalyst for the synthesis of N-methylated products via CO2 fixation and primary carbamates from alcohols and urea

Copper nanoparticles incorporated triazinetriamine derived porous organic polymer based catalyst was synthesized for catalytic production N-methylated amines and primary carbamates.

Diverse Catalytic Systems and Mechanistic Pathways for Hydrosilylative Reduction of CO2

Catalytic hydrosilylation of carbon dioxide has emerged as a promising approach for carbon dioxide utilization. It allows the reductive transformation of carbon dioxide into value-added products at the levels of formate, formaldehyde, methanol, and methane. Tremendous progress has been made in the area of carbon dioxide hydrosilylation since the first reports in 1981. This focus review describes recent advances in the design and catalytic performance of leading catalyst systems, including transition-metal, main-group, and transition-metal/main-group and main-group/main-group tandem catalysts. Emphasis is placed on discussions of key mechanistic features of these systems and efforts towards the development of more selective, efficient, and sustainable carbon dioxide hydrosilylation processes.