Pore Surface Engineering with Controlled Loadings of Functional Groups via Click Chemistry in Highly Stable Metal–Organic Frameworks

The post-synthesis modification (PSM) of MOFs for catalysis

While there are myriad ways to construct metal-organic framework (MOF) based catalysts, the introduction of catalytic functionality via covalent post-synthesis functionalization (PSM) offers multiple advantages: (i) a wide range of different catalyst types are generated from a handful of well-known parent MOFs, (ii) MOF catalyst properties can be systematically tuned while changing few variables, and (iii) catalytically active functional groups that would otherwise interfere with MOF assembly can be introduced facilely. This last advantage is particularly crucial for our quest to generate MOF active sites that are decorated with multiple functional groups capable of cooperative activity, analogous to enzyme active sites.

Metal-Organic Frameworks for Water Harvesting and Concurrent Carbon Capture: A Review for Hygroscopic Materials

As water scarcity becomes a pending global issue, hygroscopic materials prove a significant solution. Thus, there is a good cause following the structure-performance relationship to review the recent development of hygroscopic materials and provide inspirational insight into creative materials. Herein, traditional hygroscopic materials, crystalline frameworks, polymers, and composite materials are reviewed. The similarity in working conditions of water harvesting and carbon capture makes simultaneously addressing water shortages and reduction of greenhouse effects possible. Concurrent water harvesting and carbon capture is likely to become a future challenge. Therefore, an emphasis is laid on metal-organic frameworks (MOFs) for their excellent performance in water and CO2 adsorption, and representative role of micro- and mesoporous materials. Herein, the water adsorption mechanisms of MOFs are summarized, followed by a review of MOF's water stability, with a highlight on the emerging machine learning (ML) technique to predict MOF water stability and water uptake. Recent advances in the mechanistic elaboration of moisture's effects on CO2 adsorption are reviewed. This review summarizes recent advances in water-harvesting porous materials with special attention on MOFs and expects to direct researchers' attention into the topic of concurrent water harvesting and carbon capture as a future challenge.

Water-stable metal-organic frameworks (MOFs): rational construction and carbon dioxide capture

Metal-organic frameworks (MOFs) are considered to be a promising porous material due to their excellent porosity and chemical tailorability. However, due to the relatively weak strength of coordination bonds, the stability (e.g., water stability) of MOFs is usually poor, which severely inhibits their practical applications. To prepare water-stable MOFs, several important strategies such as increasing the bonding strength of building units and introducing hydrophobic units have been proposed, and many MOFs with excellent water stability have been prepared. Carbon dioxide not only causes a range of climate and health problems but also is a by-product of some important chemicals (e.g., natural gas). Due to their excellent adsorption performances, MOFs are considered as a promising adsorbent that can capture carbon dioxide efficiently and energetically, and many water-stable MOFs have been used to capture carbon dioxide in various scenarios, including flue gas decarbonization, direct air capture, and purified crude natural gas. In this review, we first introduce the design and synthesis of water-stable MOFs and then describe their applications in carbon dioxide capture, and finally provide some personal comments on the challenges facing these areas.

Solvent-Directed Construction of a Nanoporous Metal-Organic Framework with Potential in Selective Adsorption and Separation of Gas Mixtures Studied by Grand Canonical Monte Carlo Simulations

In this report, a microporous metal-organic framework of [Ca(TDC)(DMA)]n (1) and a two-dimensional coordination polymer of [Ca(TDC)(DMF)2 ]n (2), (TDC2- =Thiophene-2,5-dicarboxylate, DMA=N, N'-dimethylacetamide and DMF=N, N'-dimethylformamide) based on Ca(II) were designed by the effect of solvent, and X-ray analysis was performed for the single crystals of 1 and 2. Then, compound 1 was synthesized in three different methods and identified with a set of analyses. Compared to other adsorbents, MOFs are widely used in the field of adsorption and separation of various gases due to a series of distinctive features such as diverse and adjustable structures pores with different dimensions, high porosity and surface area with regular distribution of active sites. Therefore, the ability of 1 to uptake single gases (CH4 , CO2 , C2 H2 , H2, and N2 ) and separation of several binary mixtures of gases (CO2 /CH4 , CO2 /N2 , CO2 /H2 and CO2 /C2 H2 ), were investigated using Grand Canonical Monte Carlo simulations. Volumetric and gravimetric adsorption isotherms in various operating conditions, the isosteric heat of adsorption (qst ), the chemical potential for each thermodynamic state, and snapshots during the simulation process were reported in all cases. The results obtained from the adsorption simulation indicate that compound 1 has a high capacity for uptake of H2 (16 mmol g-1 ) and N2 (12.5 mmol g-1 ), CO2 (6.6 mmol g-1 ), C2 H2 (5 mmol g-1 ) and CH4 (1.5 mmol g-1 ) gases at 1 bar. It also performs well in separating CO2 in binary mixtures, which can be attributed to the presence of open metal sites in nodes of 1 and their electrostatic tendency to interact with CO2 containing the higher quadrupole dipole moment compared to other components of the mixture.

Enantioselective Target Transport-Mediated Nanozyme Decomposition for the Identification of Reducing Enantiomers in Asymmetric Nanochannel Arrays

Enantioselective identification of chiral molecules is regarded as one of the key issues in biological and medical sciences because of their configuration-dependent effects on biological systems. In this study, we developed an electrochemical platform based on a tandem recognition-reaction zone design in TiO2 nanochannels for the specific recognition of reducing enantiomers. In this system, MIL-125(Ti) Ti-metal-organic frameworks, in situ grown in TiO2 nanochannels, provided a homochiral recognition environment via postmodification with l-tartaric acid (l-TA); MnO2 nanosheets possessing both glucose oxidase (GOD)- and peroxidase (POD)-mimicking activities served as the target-reactive zone at the end of the nanochannels. The use of penicillamine (Pen) enantiomers as model-reducing targets facilitated the passage of d-Pen through the homochiral recognition zone, owing to its lower affinity with l-TA. The passed Pen molecules reached the responsive zone and induced a target concentration-dependent MnO2 disassembly. Such target recognition event impaired the cascade GOD- and POD-like activities of MnO2. Combining the enantioselectivity of the recognition nanochannels with the cascade enzyme-like activity of MnO2 toward glucose and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate), the quantitative identification of l- and d-Pen was achieved through the changes in transmembrane ionic current induced by the generated charged products. This recognition-reaction zone design paves an effective way for developing a promising electrochemical platform for the identification of reducing enantiomers with improved selectivity and sensitivity.

Multifunctional Aryl Sulfonium Decavanadates: Tuning the Photochromic and Heterogeneous Oxidative Desulfurization Catalytic Properties Using Salicylaldehyde-type Functional Moieties on Counterions

Multifunctional materials based on polyoxovanadates (POVs) have rarely been reported. Herein, we used aryl sulfonium counterions (ASCIs) bearing a salicylaldehyde-type functionality to tune the properties of decavanadate ([V10O28]6-)-based hybrids for their application in photochromism and heterogeneous oxidative desulfurization (ODS) catalysis. The counterions FHPDS ((3-formyl-4-hydroxyphenyl)dimethylsulfonium), DFHPDS ((3,5-diformyl-4-hydroxyphenyl)dimethylsulfonium), and EFPDS ((4-ethoxy-3-formylphenyl)dimethylsulfonium) were clubbed with the decavanadate cluster to generate the hybrids (FHPDS)4[H2V10O28](H2O)4 (HY1), (DFHPDS)4[H2V10O28](H2O)3 (HY2), and (EFPDS)4[H2V10O28](H2O)6 (HY3). The photochromic properties of these hybrids were tested under 365 nm irradiation, which showed a color change from yellow to green. Different hybrids exhibited different photocoloration half-life (t1/2) values in the range of 0.77-28.38 min, suggesting the dependence of the photocoloration properties upon functional groups on the counterions. The hybrid HY2, having a 2,6-diformyl phenol moiety on the ASCI, exhibited an impressive t1/2 of 0.77 min. UP to 70% reversibility of photocoloration was achieved for the best photochromic hybrid HY2 in 48 h at 70 °C under an oxygen atmosphere. Theoretical and experimental data suggested that some of these aryl sulfonium POVs follow a different e--h+ stabilization mechanism than traditional sulfonium POM hybrids. Further, the salicylaldehyde-type ASCIs control the solubility of the decavanadate hybrids, which enables their application as heterogeneous catalysts for the selective oxidation of various sulfides. The nature of the substituents on the ASCIs also affected their catalytic activities; the counterion that facilitates the reversible V4+/V5+ switching enhances the catalytic ODS efficiency of the hybrids. Using HY2 as the catalyst, up to 99% conversion and 96% selectivity toward sulfones were achieved in dibenzothiophene (DBT) oxidation. The present study suggests a new promising approach for controlling POVs' photoresponsive and catalytic properties by using ASCIs bearing salicylaldehyde-type functional moieties.

Rapid post-synthetic modification of porous coordination cages with copper-catalyzed click chemistry

Novel cobalt calixarene-capped and zirconium-based porous coordination cages were prepared with alkyne and azide functionality to leverage post-synthetic modification by click chemistry. While the calixarene-capped cages showed impressive stability when exposed to the most straightforward copper(I)-catalyzed alkyne-azide cycloaddition (CuAAC) reaction conditions with copper(II) sulfate and sodium ascorbate as the reducing agent, milder reaction conditions were necessary to perform analogous CuAAC reactions on zirconium-based cages. Reaction kinetics were monitored by IR spectroscopy, confirming rapid reaction times (<3 hours).

High-Concentration Self-Assembly of Zirconium- and Hafnium-Based Metal-Organic Materials

Metal-organic frameworks (MOFs) are crystalline, porous solids constructed from organic linkers and inorganic nodes that are promising for applications in chemical separations, gas storage, and catalysis, among many others. However, a major roadblock to the widespread implementation of MOFs, including highly tunable and hydrolytically stable Zr- and Hf-based frameworks, is their benchtop-scalable synthesis, as MOFs are typically prepared under highly dilute (≤0.01 M) solvothermal conditions. This necessitates the use of liters of organic solvent to prepare only a few grams of MOF. Herein, we demonstrate that Zr- and Hf-based frameworks (eight examples) can self-assemble at much higher reaction concentrations than are typically utilized, up to 1.00 M in many cases. Combining stoichiometric amounts of Zr or Hf precursors with organic linkers at high concentrations yields highly crystalline and porous MOFs, as confirmed by powder X-ray diffraction (PXRD) and 77 K N2 surface area measurements. Furthermore, the use of well-defined pivalate-capped cluster precursors avoids the formation of ordered defects and impurities that arise from standard metal chloride salts. These clusters also introduce pivalate defects that increase the exterior hydrophobicity of several MOFs, as confirmed by water contact angle measurements. Overall, our findings challenge the standard assumption that MOFs must be prepared under highly dilute solvothermal conditions for optimal results, paving the way for their scalable and user-friendly synthesis in the laboratory.

Nanoproteomics deciphers the prognostic value of EGFR family proteins-based liquid biopsy

Monitoring tumor-associated protein status in serum can effectively track tumors and avoid time-consuming, costly, and invasive tissue biopsy. Epidermal growth factor receptor (EGFR) family proteins are often recommended in the clinical management of multiple solid tumors. However, the low-abundance of serum EGFR (sEGFR) family proteins hinders the depth-understanding of their function and tumor management. Herein, a nanoproteomics approach coupling with aptamer-modified MOFs (NMOFs-Apt) with mass spectrometry was developed for the enrichment and quantitative analysis of sEGFR family proteins. This nanoproteomics approach exhibited high sensitivity and specificity for sEGFR family protein quantification, with the limit of quantification as low as 1.00 nM. After detecting 626 patients' sEGFR family proteins with various malignant tumors, we concluded that the levels of serum proteins had a moderate concordance with tissue counterparts. Metastatic breast cancer patients with a high level of serum human epidermal growth factor receptor 2 (sHER2) and a low level of sEGFR had a poor prognosis, and patients with a sHER2 decrease of more than 20% had longer disease-free time after receiving chemotherapy. This nanoproteomics method provided a simple and effective approach for low-abundant serum protein detection and our results clarified the potential of sHER2 and sEGFR as cancer markers.

Recent advances in MOF-bio-interface: a review

Metal-organic frameworks (MOFs), as a class of promising material with adjustable function and controllable structure, have been widely used in the food industry, chemical industry, biological medicine, and sensors. Biomacromolecules and living systems play a critical role in the world. However, the insufficiency in stability, recyclability, and efficiency, significantly impedes their further utilization in slightly harsh conditions. MOF-bio-interface engineering effectively address the above-mentioned shortages of biomacromolecules and living systems, and thereby attracting considerable attentions. Herein, we systematically review the achievements in the area of MOF-bio-interface. In particular, we summarize the interface between MOFs and proteins (enzymes and non-enzymatic proteins), polysaccharides, DNA, cells, microbes, and viruses. Meanwhile, we discuss the limitations of this approach and propose future research directions. We expect that this review could provide new insights and inspire new research efforts towards life science and material science.

A New Microporous Lanthanide Metal-Organic Framework with a Wide Range of pH Linear Response

Lanthanide metal-organic frameworks (Ln-MOFs) have attracted extensive attention because of their structural adjustability and wide optical function applications. However, MOFs with a wide linear pH response and stable framework structures in acidic or alkaline solutions are rare to date. Here, we used 4,4',4″-s-triazine-2,4,6-triyltribenzoate (H₃TATB) as an organic ligand, coordinated with lanthanide ions (Eu³⁺/Tb³⁺), and synthesized a new metal-organic framework material. The material has a porous three-dimensional square framework structure and emits bright red or green fluorescence under 365 nm UV light. The carboxyl group of the ligand is prone to protonation in an acidic environment, and negatively charged OH^- and ligand (TATB^3-) have a competitive effect in an alkaline environment, which could affect the coordination ability of ligand. The luminescence degree of the framework decreases with the increase in the degree of acid and base. In particular, such fluorescence changes have a wide linear response (pH = 0-14), which can be used as a potential fluorescence sensing material for pH detection.

Recent developments in MOF and MOF based composite as potential adsorbents for removal of aqueous environmental contaminants

With the growth of globalization which has been the primary cause of water pollution, it is utmost necessary for us living being to have access to clean water for the purpose of drinking, washing and various other useful applications. With the purpose of future security and to restore our ecological balance, it is essential to give much significance towards the removal of unwanted toxic contaminants from our water resources. In this regard adsorptive removal of toxic pollutants from wastewater with porous adsorbent is regarded as one of the most promising way for water decontamination process. Metal organic frameworks (MOFs) comprising of uniformly arranged pores, abundant active sites and containing an easily tunable structure has aroused as a promising material for adsorbent to remove the unwanted contaminants from water sources. The adsorption of pollutants by the different MOFs surface are driven by various interactions including π-π, acid-base, electrostatic and H-bonding etc. On the other hand, the removal of various contaminants by MOFs is influenced by various factors including pH, temperature and initial concentration. In this review we will specifically discuss the adsorptive removal of different organic and inorganic pollutants present in our water systems with the use of MOFs as adsorbent along with the various factors and interaction mechanism manipulating the adsorption behaviour.

Research Progress in Metal-Organic Framework Based Nanomaterials Applied in Battery Cathodes

Metal-Organic Frameworks have attracted profound attention the latest years for use in environmental applications. They can offer a broad variety of functions due to their tunable porosity, high surface area and metal activity centers. Not more than ten years ago, they have been applied experimentally for the first time in energy storage devices, such as batteries. Specifically, MOFs have been investigated thoroughly as potential materials hosting the oxidizing agent in the cathode electrode of several battery systems such as Lithium Batteries, Metal-Ion Batteries and Metal-Air Batteries. The aim of this review is to provide researchers with a summary of the electrochemical properties and performance of MOFs recently implemented in battery cathodes in order to provide fertile ground for further exploration of performance-oriented materials. In the following sections, the basic working principles of each battery system are briefly defined, and special emphasis is dedicated to MOF-based or MOF-derived nanomaterials, especially nanocomposites, which have been tested as potential battery cathodes.

Construction and application of base-stable MOFs: a critical review

Metal-organic frameworks (MOFs) are a new class of porous crystalline materials constructed from organic ligands and metal ions/clusters. Owing to their unique advantages, they have attracted more and more attention in recent years and numerous studies have revealed their great potential in various applications. Many important applications of MOFs inevitably involve harsh alkaline operational environments. To achieve high performance and long cycling life in these applications, high stability of MOFs against bases is necessary. Therefore, the construction of base-stable MOFs has become a critical research direction in the MOF field. This review gives a historic summary of the development of base-stable MOFs in the last few years. The key factors that can determine the robustness of MOFs under basic conditions are analyzed. We also demonstrate the exciting achievements that have been made by utilizing base-stable MOFs in different applications. In the end, we discuss major challenges for the further development of base-stable MOFs. Some possible methods to address these problems are presented.

Ethylene oxide functionalization enhances the ionic conductivity of a MOF

Varying the degree of ethylene oxide (EO) functionalization of the zirconium MOF UiO-68 affords two novel MOFs; UiO-68-EO and UiO-68-2EO exhibit solvent-free ionic conductivity upon loading LiTFSI in their pores. Incorporating EO chains provides a pathway for lithium ion migration between the coordinated sites and results in an ionic conductivity of 3.8 × 10^-7 S cm^-1 and 3.9 × 10^-4 S cm^-1 at 90 °C for UiO-68-EO/LiTFSI and UiO-68-2EO/LiTFSI respectively.

DNA-Based MXFs to Enhance Radiotherapy and Stimulate Robust Antitumor Immune Responses

Metal "X" Frameworks (MXFs) constructed from metal ions and biomacromolecules ("X components") via coordination interactions show crystalline structures and diverse functionalities. Here, a series of MXFs composed of various metal ions (e.g., Zn²⁺, Hf⁴⁺, Ca²⁺) and DNA oligodeoxynucleotides were reported. With MXF consisting of Hf⁴⁺ and CpG oligodeoxynucleotides as the example, we show that such Hf-CpG MXF can achieve high-Z elements-enhanced photon radiotherapy and further trigger robust tumor-specific immune responses, thus showing efficient tumor suppression ability. In vivo experiments showed that external beam radiotherapy applied on tumors locally injected with Hf-CpG MXF result in the thorough elimination of primary tumors, complete inhibition of tumor metastasis, and protection against tumor rechallenge by triggering robust antitumor immune responses. Our findings provide a blueprint for fabricating a variety of rationally designed MXFs with desired functions and present the strategy of stimulating whole-body systemic immune responses by only local treatment of radiotherapy.

A Structure-Activity Study of Aromatic Acid Modulators for the Synthesis of Zirconium-Based Metal-Organic Frameworks

Acid modulation is among the most widely employed methods for preparing metal-organic frameworks (MOFs) that are both stable and highly crystalline, yet there exist few guiding principles for selecting the optimal modulator for a given system. Using the Zr-based MOFs UiO-66 and UiO-68-Me₂ (UiO = Universitetet i Oslo) as representative materials, here we present for the first time an in-depth structure-activity study of acid modulators and identify key principles of modulation for the synthesis of highly crystalline Zr-MOFs. By applying whole pattern fitting of powder X-ray diffraction (PXRD) patterns as a technique for evaluating modulator efficacy, complemented by scanning electron microscopy (SEM), ¹H NMR, and thermogravimetric analysis (TGA), we demonstrate that the key to effective modulation is competition between the linker and modulator for coordination to the Zr secondary building units (SBUs). Specifically, we illustrate that a close match in pK _a and structure between the linker and modulator favors larger and more well-defined crystallites, particularly with sterically unhindered aromatic acid modulators. Based on our findings, we demonstrate that 5-membered heteroaromatic carboxylic acids are among the most efficient acid modulators identified to date for the synthesis of several representative Zr-MOFs with fcu net topologies. In addition, we find that coordination modulation is superior to exogenous acid modulation at higher modulator concentrations. Finally, we compare ¹H NMR and TGA as data-driven methods for quantifying linker deficiencies in modulated MOF syntheses. The guiding principles established herein have critical implications for the scalable and controllable synthesis of highly crystalline and stable MOFs relevant to chemical separations, gas storage, and catalysis.

Metal-Organic Frameworks Derived Electrocatalysts for Oxygen and Carbon Dioxide Reduction Reaction

The increasing demands of energy and environmental concerns have motivated researchers to cultivate renewable energy resources for replacing conventional fossil fuels. The modern energy conversion and storage devices required high efficient and stable electrocatalysts to fulfil the market demands. In previous years, we are witness for considerable developments of scientific attention in Metal-organic Frameworks (MOFs) and their derived nanomaterials in electrocatalysis. In current review article, we have discussed the progress of optimistic strategies and approaches for the manufacturing of MOF-derived functional materials and their presentation as electrocatalysts for significant energy related reactions. MOFs functioning as a self-sacrificing template bid different benefits for the preparation of metal nanostructures, metal oxides and carbon-abundant materials promoting through the porous structure, organic functionalities, abundance of metal sites and large surface area. Thorough study for the recent advancement in the MOF-derived materials, metal-coordinated N-doped carbons with single-atom active sites are emerging candidates for future commercial applications. However, there are some tasks that should be addressed, to attain improved, appreciative and controlled structural parameters for catalytic and chemical behavior.

Hierarchical porous metal–organic gels and derived materials: from fundamentals to potential applications

This review summarizes recent progress in the development and applications of metal–organic gels (MOGs) and their hybrids and derivatives dividing them into subclasses and discussing their synthesis, design and structure–property relationship.

Hf-based UiO-66-type solid electrolytes for all-solid-state lithium batteries

Solid electrolytes composed of Hf-based metal–organic frameworks (MOFs) were synthesized with excellent cycling stabilities. Their ionic conductivities were up to 2.82 × 10−3 S cm−1 at room temperature.

Co3ZnC@NC Material Derived from ZIF-8 for Lithium-Ion Capacitors

Metal-organic framework (MOF)-derived carbon materials were widely reported as the anodes of lithium-ion capacitors (LICs). However, tunning the structure and electrochemical performance of the MOF-derived carbon materials is still challenging. Herein, metal carbide materials of Co3ZnC@NC-8:2 were obtained by the pyrolysis of the MOF materials of Co0.2Zn0.8ZIF-8 (Zn/Co ratio of 8:2). A half-cell assembled with the Co3ZnC@NC-8:2 electrode exhibits a discharge capacity of the electrode material of 598 mAh g-1 at a current density of 0.1 A g-1. After 100 cycles, the retention rate of discharge specific capacity is about 90%. The high performance of Co3ZnC@NC-8:2 is ascribed to its high crystalline degree and well-defined structure, which facilitates the intercalation/deintercalation of lithium ions and buffers the volume change during the charge/discharge process. The high capacitance contribution ratio calculated by cyclic voltammetry (CV) curves at different scanning rates indicates the pseudocapacitance storage mechanism. LICs constructed from the Co3ZnC@NC-8:2 material have a rectangular CV curve, while the charge-discharge curve has a symmetrical triangular shape. This study indicates that MOF-derived carbon is one of the promising materials for high-performance LICs.

Programmable Logic in Metal-Organic Frameworks for Catalysis

Metal-organic frameworks (MOFs) have emerged as one of the most widely investigated materials in catalysis mainly due to their excellent component tunability, high surface area, adjustable pore size, and uniform active sites. However, the overwhelming number of MOF materials and complex structures has brought difficulties for researchers to select and construct suitable MOF-based catalysts. Herein, a programmable design strategy is presented based on metal ions/clusters, organic ligands, modifiers, functional materials, and post-treatment modules, which can be used to design the components, structures, and morphologies of MOF catalysts for different reactions. By establishing the corresponding relationship between these modules and functions, researchers can accurately and efficiently construct heterometallic MOFs, chiral MOFs, conductive MOFs, hierarchically porous MOFs, defective MOFs, MOF composites, and MOF-derivative catalysts. Further, this programmable design approach can also be used to regulate the physical/chemical microenvironments of pristine MOFs, MOF composites, and MOF-derivative materials for heterogeneous catalysis, electrocatalysis, and photocatalysis. Finally, the challenging issues and opportunities for the future research of MOF-based catalysts are discussed. Overall, the modular design concept of this review can be applied as a potent tool for exploring the structure-activity relationships and accelerating the on-demand design of multicomponent catalysts.

Ligand Bent-Angle Engineering for Tuning Topological Structures and Acetylene Purification Performances of Copper-Diisophthalate Frameworks

To enrich structural chemistry and widen the application prospects of MOFs (metal-organic frameworks), the development of a synthetic strategy to realize structural and functional modulation is highly demanded. By implementation of the linker bent-angle engineering strategy, three banana-like diisophthalate linkers with distinct bent angles were designed and synthesized. The inclusion of the targeted linkers into MOFs through solvothermal assembly with CuCl₂·2H₂O under identical conditions yielded three crystalline solids featuring diversified topological structures as revealed by X-ray crystallographic studies. Furthermore, functional explorations indicated that they are promising solid adsorbents for acetylene (C₂H₂) purification application with structurally dependent separation potentials. The results reported in this study illustrated a rare example of modulating the topological structures and separation efficiencies of MOFs by engineering the ligand bent angles.

Introducing High Density of Very Active Sites and Stepwise Postmodification for Tailoring the Porosity of Highly Demanding Cr3+-Based Metal-Organic Frameworks

Chromium(III)-based metal-organic frameworks (Cr-MOFs) are highly robust and porous and have been very attractive in a wide range of investigations. However, the harsh direct synthetic conditions not only impede the synthesis of new Cr-MOFs but also restrict the introduction of functional groups into them. Postsynthetic modification has somewhat alleviated such difficulties; nevertheless, it still suffered from procedures that are tedious and conditions that are not mild, which often result in low concentration of the functional groups introduced. To overcome these shortcomings, here, in this paper, we supplied a new route and prepared a benzyl alcohol functionalized Cr-SXU-2 from the judiciously designed benzyl alcohol functionalized Fe-SXU-2 through solvent-assisted metal metathesis strategy. The functionalized Cr-SXU-2 shows well-preserved crystallinity, porosity, and high chemical stability. The benzyl alcohol group can be converted into a very active benzyl bromide group in an almost quantitative yield and thus for the first time produce the benzyl bromide functionalized MOF, Cr-SXU-2-Br, in which the -Br group can be exchanged by a nucleophilic group. As a proof of concept, -N₃ was introduced and transformed into other active sites via "click reaction" to further tailor the interior of Cr-SXU-2. All these functionalized Cr-MOFs showed improved adsorption performance in contrast to the nonfunctionalized one. This step-by-step postmodification process not only diversifies the functionalization of robust MOFs but also opens a new route to employ many different functional groups in the demanding highly stable Cr-MOF platforms.

Advances in chlorin-based photodynamic therapy with nanoparticle delivery system for cancer treatment

Introduction: The treatment of tumors is one of the most difficult problems in the medical field at present. Patients often use a comprehensive therapy that combines surgery, radiotherapy, and chemotherapy. Photodynamic therapy (PDT) has prominent potential for eradicating various cancers. Chlorin-based photosensitizers (PSs), as one of the most utilized photosensitizers, have many advantages over conventional photosensitizers; however, a successful chlorin-based PDT needs multi-functional nano-carriers for selective photosensitizer delivery. The number of researches about nanoparticles designed for improved chlorin-based PSs is increasing in the current era. In this article, we give a brief review focused on the recent research progress in design of chlorin-based nanoparticles for the treatment of malignant tumors with photodynamic therapy.Areas covered: This review focuses on the current nanoparticle platforms for PDT, and describes different strategies to achieve controllable PDT by chlorin-nano-delivery systems. The challenges and prospects of PDT in clinical applications are also discussed.Expert opinions: The requirement for PDT to eradicate cancers has increased exponentially in recent years. The major clinically used photosensitizers are hydrophobic. The main obstacles in effective delivery of PSs are associated with this intrinsic nature. The design of nano-delivery systems to load PSs is pivotal for PSs' widespread use.

High Enhancement in Proton Conductivity by Incorporating Sulfonic Acids into a Zirconium-Based Metal-Organic Framework via "Click" Reaction

Taking a robust zirconium-based metal-organic framework, UiO-66, as a prototype, functional postmodification via the versatile Cu(I)-catalyzed azide-alkyne "click" reaction was carried out, and sulfonic acid groups were successfully grafted into its skeleton. Characterizations revealed that the MOF network was still well maintained after being treated by "clicked" modification. Investigations by electrochemical impedance spectroscopy measurements revealed that its proton conductivity increases exponentially up to 8.8 × 10^-3 S cm^-1 at 80 °C and 98% RH, while those of the UiO-66 and UiO-66-NH₂ are only 6.3 × 10^-6 and 3.5 × 10^-6 S cm^-1, respectively, at the same condition. Additionally, the continuous test shows it possesses long-life reusability. Such a remarkable enhancement on the proton conductivities and high performance in long-life reusability of the resultant MOF demonstrated that the "click" reaction is a facile reaction in postmodification of robust porous materials toward targeted applications, with which highly promising candidates of proton-conductive electrolytes for applying in proton-exchange-membrane (PEM) fuel cell can be achieved.

Dual-Selective Catalysis in Dephosphorylation Tuned by Hf6-Containing Metal-Organic Frameworks Mimicking Phosphatase

Selective dephosphorylation is full of great challenges in the field of biomimetic catalysis. To mimic the active sites of protein phosphatase, Hf-OH-Hf motif-containing metal-organic frameworks (MOFs) were obtained and structurally characterized, which are assembled from [Hf48Ni6] cubic nanocages and exhibit good stability in various solvents and acid/base solutions. Catalytic investigations suggest as-synthesized Hf-Ni and Hf-Ni-NH 2 display accurate type-selectivity (selectively catalyzed P-O rather than S-O or C-O bonds) and position-selectivity (selectively catalyzed phosphomonoesters over phosphodiesters) for the hydrolysis of phosphoesters. Reaction kinetic studies further revealed the high activity of the catalytic sites in these catalysts, and the unique catalytic selectivity and high activity are comparable to phosphatase. Additionally, these MOF catalysts possess good recursivity and hypotoxicity. Control experiments (including Hf- and Zr-based isomorphous MOFs) and theoretical calculations indicate that both triplet nickel and Hf6 clusters play significant roles in the unique binding site and favorable binding energy. To our knowledge, this is the first example of selective dephosphorylation through MOF catalysts as mimic enzymes, which paves a potential way for the development of specific therapeutic MOFs.

Chemical targets to deactivate biological and chemical toxins using surfaces and fabrics

The most recent global health and economic crisis caused by the SARS-CoV-2 outbreak has shown us that it is vital to be prepared for the next global threat, be it caused by pollutants, chemical toxins or biohazards. Therefore, we need to develop environments in which infectious diseases and dangerous chemicals cannot be spread or misused so easily. Especially, those who put themselves in situations of most exposure - doctors, nurses and those protecting and caring for the safety of others - should be adequately protected. In this Review, we explore how the development of coatings for surfaces and functionalized fabrics can help to accelerate the inactivation of biological and chemical toxins. We start by looking at recent advancements in the use of metal and metal-oxide-based catalysts for the inactivation of pathogenic threats, with a focus on identifying specific chemical bonds that can be targeted. We then discuss the use of metal-organic frameworks on textiles for the capture and degradation of various chemical warfare agents and their simulants, their long-term efficacy and the challenges they face.

Click Modification of a Metal-Organic Framework for Two-Photon Photodynamic Therapy with Near-Infrared Excitation

The exploitation of effective strategies to develop materials bearing deep tissue focal fluorescence imaging capacity and excellent reactive oxygen species (ROS) generation ability is of great interest to address the high-priority demand of photodynamic therapy (PDT). Therefore, we use a rational strategy to fabricate a two-photon-active metal-organic framework via a click reaction (PCN-58-Ps). Moreover, PCN-58-Ps is capped with hyaluronic acid through coordination to obtain cancer cell-specific targeting properties. As a result, the optimized composite PCN-58-Ps-HA exhibits considerable two-photon activity (upon laser excitation at a wavelength of 910 nm) and excellent light-triggered ROS (¹O₂ and O₂^•-) generation ability. In summary, the interplay of these two critical factors within the PCN-58-Ps-HA framework gives rise to near-infrared light-activated two-photon PDT for deep tissue cancer imaging and treatment, which has great potential for future clinical applications.

Translational dynamics of a non-degenerate molecular shuttle imbedded in a zirconium metal-organic framework

A new [2]rotaxane molecular shuttle linker based on the binding of a 24-crown-8 ether macrocycle at a benzimidazole recognition site was synthesised. The shuttling dynamics of the linker were studied in solution and the structure confirmed by X-ray crystallography. A multivariate Zr(iv) MOF, UWDM-11, containing the new MIM linker and primary linker tetramethylterphenyldicarboxylate was synthesised and the translational motion of the molecular shuttle studied in the solid state. The use of a 13C enriched MIM linker allowed the dynamics of both activated and mesitylene-solvated UWDM-11 to be elucidated by VT 13C CPMAS SSNMR. The incorporation of mesitylene into the pores of UWDM-11 resulted in a significant increase in the barrier for thermally driven translation of the macrocycle.

Great Location: About Effects of Surface Bound Neighboring Groups for Passive and Active Fine-Tuning of CO2 Adsorption Properties in Model Carbon Capture Materials

Improved carbon capture materials are crucial for managing the CO₂ level in the atmosphere. The past focus was on increasing adsorption capacities. It is widely known that controlling the heat of adsorption (ΔH_ads ) is equally important. If it is too low, CO₂ uptake takes place at unfavorable conditions and with insufficient selectivity. If it is too high, chemisorption occurs, and the materials can hardly be regenerated. The conventional approach for influencing ΔH_ads is the modification of the adsorbing center. This paper proposes an alternative strategy. The hypothesis is that fine-tuning of the molecular environment around the adsorbing center is a powerful tool for the adjustment of CO₂ -binding properties. Via click chemistry, any desired neighboring group (NG) can be incorporated on the surfaces of the nanoporous organosilica model materials. Passive NGs induce a change in the polarity of the surface, whereas active NGs are capable of direct interaction with the active center/CO₂ pair. The effects on ΔH_ads and on the selectivity are studied. A situation can be realized which resembles frustrated Lewis acid-base pairs, and the investigation of the binding-species by solid-state NMR indicates that the push-pull effects could play an essential role not only in CO₂ adsorption but also in its activation.

A critical review on the electrospun nanofibrous membranes for the adsorption of heavy metals in water treatment

Electrospun nanofibrous membranes (ENFMs) have many superior advantages, such as large specific surface area, high porosity, easy modification, good flexibility, and easy separation for recycling, which are consider as excellent adsorbents. In this paper, the research progress in the adsorption of heavy metals in water treatment by ENFMs is reviewed. Three types of ENFMs, including organic polymer ENFMs, organic polymer/inorganic material composite ENFMs and inorganic ENFMs are summarized, and their adsorption capacities for heavy metals in water are compared. The adsorption selectivity and capacity of ENFMs for heavy metals are depended largely on the type and number of functional groups on the surface of membranes, and usually the more the functional groups, the higher the adsorption capacity. The adsorption mechanisms of ENFMs are also mainly determined by the type of functional groups on the membrane. At present, the main challenge is to achieve the mass production of high-quality nanofibers and their actual application in the treatment of heavy metal-containing wastewater. Therefore, more consideration should be focused on the improvement of stability, mechanical strength and reusability of ENFMs. This review may provide an insight for the development of ENFMs-based adsorbents for heavy metals separation and water purification in the future.

Hierarchical Metal-Organic Framework Films with Controllable Meso/Macroporosity

The structuring of the metal-organic framework material ZIF-8 as films and membranes through the vapor-phase conversion of ZnO fractal nanoparticle networks is reported. The extrinsic porosity of the resulting materials can be tuned from 4% to 66%, and the film thickness can be controlled from 80 nm to 0.23 mm, for areas >100 cm2. Freestanding and pure metal-organic frameworks (MOF) membranes prepared this way are showcased as separators that minimize capacity fading in model Li-S batteries.

Variability of Uranyl Carboxylates from Rigid Terophenyldicarboxylic Acid Ligands

Three uranyl carboxylates, namely, (UO₂)(L¹)(H₂O)_0.5 (1), [(UO₂)(L²)(H₂O)]·2H₂O (2), and [(UO₂)(L²)(H₂O)]·(CH₃CN) (3), were synthesized hydrothermally from 2',3',5',6'-tetramethyl-(1,1':4',1″-terphenyl)-4,4″-dicarboxylic acid (H₂L¹) and 2',5'-dimethyl-(1,1':4',1″-terphenyl)-3,3″-dicarboxylic acid (H₂L²), which are all steric carboxylic acid ligands but vary with the carboxylic acid group position and methyl group number. It is found that compound 1 displays a three-dimensional 8-fold-interpenetrated net with channels running along the c direction. Compounds 2 and 3 are isostructural, and all display two-dimensional-layered crystal structures but contain different guest molecules. The photophysical measurements reveal that compounds 1 and 2, which contain disordered water molecules, are luminescence-quenched, whereas compound 3 containing acetonitrile molecules is luminescent.

Exploring the dynamics of Zr-based metal-organic frameworks containing mechanically interlocked molecular shuttles

Zr(iv) metal-organic frameworks (MOFs) UiO-68 and PCN-57, containing triphenylene dicarboxylate (TPDC) and tetramethyl-triphenylene dicarboxylate (TTDC) linkers, respectively, were doped with an H-shaped tetracarboxylate linker that contains a [2]rotaxane molecular shuttle. The new MOFs, UWDM-8 and UWDM-9, contain a [2]rotaxane crossbar spanning the tetrahedral cavities of the fcu topology while the octahedral cavities remain empty. ¹³C solid-state NMR (SSNMR) spectra and solution ¹H NMR spectra verified that the [2]rotaxanes were included as designed. Variable-temperature (VT) cross polarization (CP) magic-angle spinning (MAS) ¹³C SSNMR was used to explore the translational motion of the macrocyclic ring in both MOFs. The SSNMR results clearly show that the structure of the linker (TPDCvs.TTDC) affects the shuttling rate of the macrocyclic ring, although questions remain as to how rotation of the central phenylene unit of the strut might also affect the motion of the macrocycle.